every time I soft reset my xda2, everything disappears in ramdisk.
everything is ok in the registry and postinstallfixes is installed.
any ideas?
any ideas?
Hi there
same prob i have got
found any solution ?
BUZZ help us plz
Regards
Gugi
hi there
i think i found something i am at work now but i will try this when i get home, please read the following topic
http://www.buzzdev.net/index.php?op...c=view&id=837&catid=26&limit=15&limitstart=30
regards
Gugi
i have tired v3 wm6 update and..after the update my screen is stuck...at o2 sign..with bubbles,, the four red words appear on the screen but doesn't change anything...
i'd like to reflash back but it doesn't seem like connecting to PC via USB..
what do i do...?
and i found..
it just stopps in the boot loader mode and turns to black screeen .. and that's it...
I cna't even connect to USB so which means i can't flash back to normal..
is there any suggestions??
like resseting back up?
I have tried soft and hard reset but both don't seem to work.. still stuck in the bootloader mode....
What do I DO>>>>>>>>>>>>>....please help me...><
Try to Enter Bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
However, you have to write in the right post, i guess you mean the Ohlala_WWE_WM6_v3 ROM. If you had read the entire post youl'd know that this one is bad. V4 should solve the problem.
thanks for your answer !!but..
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
llvll said:
yes i have entered to that 3 coloured mode(bootloader mode like you said)
and I have connected my usb and it showed USB on the left corner ...
but the problem is...after I connect usb.. computer doesn't recognize my O2 device so I can't reflash my rom with SMart 1.
I ran the file called "upgrade_rom" for smart1 wm6 but it keeps telling me that "no device found.." so..
what should i do...
please help me...
and i really thank you for your response!
Click to expand...
Click to collapse
You cannot use "upgrade_rom.bat" to flash ur device with RGB screen. The bat file is for upgrade, not for fresh install. It means that you have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset ur device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
And... don't be too panic. You have to read more.
thank you so much !!
i' ll try it right now !! omg ...i'm so relived that I got an answer !!!
you are the best!
um...
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
llvll said:
i search it thru the forum.. but i Can't seem to find that file... AKU2 .xx.nvid..
can you please direct me to download that program?..
please... thanks again !
Click to expand...
Click to collapse
here http://www.4shared.com/file/12240109/ca99469a/RUU_Prophet_220734_2207114_024721_NVID.html
thanks !!!
is there an o2 version of NVID??? anywhere? i've just installed this but it says Qteck..
No it's a Qteck ROM not an O², I don't know if there is a 2.20 NVID ROM from O² here, sorry.
i've just installed AKU...thing
after installing AKU...
my phone doesn't seem like it can connect to Antisync program..
is there any reason why..this is happpenin..?
make hard reset after flash firmware!
yese !!
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
you could try this. Someone else posted it here, and when my phone stopped connecting after some update it fixed activesync. It's a switch.
llvll said:
i did the hard reset but still Activesync says It cannot be connected...
is there any other way to fix this???
I don't no if this can help but.. my device orignally was O2 and now i flashed up with Qteck AKU...
does this matter...?
if then would you let me know where i can find o2 AKU file..please...?
thanks for your reply !
Click to expand...
Click to collapse
Had O2 ever released HTC Prophet?
Sorry but I'm not O2 fan.
I have only Prophet so I know only Prophet.
You could go to the right thread for ur device O2 and look for the right .exe file.
PS: is it XDA Neo? If it is Prophet it should be OK.
Try holding Camera+Comm buttons during pressing reset button ur device will ask u to Format something. Press send button (green phone button) and try again.
Safe
Thanks guys, you saved my S200
Matos
Ohyea !!
I found the solution !!! dat Qteck one worked but um....
yea and my phone is Xda Neo !!!
the black one !
thanks for all the replies guys !!!!!!!
Whoohoo, thanx for mentioning the bootloader mode (by only holding the camera button ) Now I can try another WM6 rom, which does work I hope
hello there same problem here.. mine is also xda neo.. when trying to upgrade wm6 it stuck exactly same as yours..how did u fix the problem? thanx for ur advice
My htc gene is bricked.I have tried all the methods. I am unable to recover using Orefkov's method. When I try to press power key or soft reset button , onlr red and green light blinks. Nothing else happens. no charging indecator when i connect it to wall charger. I am even not getting the tri color screen.
please help me. to at least get into bootloader.
plese reply
hi guys can u please help me fin solution to my problem.
pravin.kamdi said:
hi guys can u please help me fin solution to my problem.
Click to expand...
Click to collapse
U better ask in gene's forum..
so whats happening exactly .. i flashed yesterday first time ever ... but after reading many times teh first sticky step step guide for flashing..
http://forum.xda-developers.com/showthread.php?t=472169
Hi, i have search the formu an the web and didn't find an answer to my problem, so i'm desperate. I hope someone can help me with my problem:
I have flashed android built on nand, but after a while the touch screen has didn't work no more, so i tried to get back my windows rom back. Now can't enter in the tricolor bootloader screen to flesh windows RUU. I have tried all the buttons too with soft reset but nothing works. I tried to remove battery then soft reset with camera pressed, also not working.
If anyone knows how, please help me...
Thanks in advance...
and excuse my english
this has happened to me also, have you found a fix?
thanks
my tablet is T272, isnt common,
and i forgot it password.
is there any way to solve this problem?
if it isnt the right forum, you can show me the right one please.
hope you have a sulotion..
this is:
http://hott.manufacturer.globalsour...dtl/Android-tablet/1055371657/7-Tablet-PC.htm
please help!
You can try to
aviranx said:
my tablet is T272, isnt common,
and i forgot it password.
is there any way to solve this problem?
if it isnt the right forum, you can show me the right one please.
hope you have a sulotion..
this is:
http://hott.manufacturer.globalsour...dtl/Android-tablet/1055371657/7-Tablet-PC.htm
please help!
Click to expand...
Click to collapse
You can try to hard reset your device I don't know the hard reset button of that device but you can search.
theboleslaw said:
You can try to hard reset your device I don't know the hard reset button of that device but you can search.
Click to expand...
Click to collapse
do know who know how to hard reset this tablet or how to get into recovery?