I would like to know if it's possible to get a qtek 9100 or 9600 (or clones) in order to use it when i'm back in paris (france) because a friend of mine goes there in 2 days and could possibly bring one accross for me.
(these 2 phones are quad-band that's why I think they can be used in japan AND in france, but maybe I missunderstood).
Thanx for your (quick?) answers....
nope. Japan don't use GSM
thanx for info m8
The HTC phones that support 3G(WCDMA) can be used in Japan.
- HTC TyTN (HTC Hermes), HTC MTeoR (HTC Breeze) and variant are compatible with both NTT DoCoMo and Vodafone JP 3G network.
- Qtek 9000 (HTC Universal) and variant are compatible with Vodafone JP network only (sometimes it catch the signal from DoCoMo base station, however not stable).
Hi folks!
I have bought a Pannon sim card with 3g internet access(Pannon is the 3rd carrier in hungary like vodafone and tmobile). My uni just keep searching for network after i enter the PIN. Its fully unlocked and supercid. Currently using a wm6 rom. The same uni works with the other 2 carriers sim card and the Pannon sim card also works in other mobile phone. I have noticed that in the network wizard there are no Pannon network under hungary panel.(But also no vodafone and uni works with vodafone card).
Is there anything that i can do with this? I am very dissappointed, now i have a 3g acces and cant use even direct push.
There are htc touch-s out there, i think i have seen them work in pannon network, cant some of you dev guys make uni to connect that network too?
hi all. i have a htc cruise branded vodaphone (italian version). i would like know if there is a sim lock because i am not able to get umts (gprs only) with other operator
(different from vodaphone)
thanks
Hm. My guess is that there is no SIM lock since you're able to use SIM from other operator.
Are you sure that other operator supports UMTS?
Hi walcom77, I bought the same phone, I guess is the WM6.0 version. Simply upgrade to standard WM6.1 from HTC site, and you'll remove vodafone brand and 3G lock for other operators sims.
Hi All,
I have recently acquired a HTC Legend which was Vodafone branded and used a RUU (WWE) to debrand it. All went well until it came to adding my Orange Internet settings. I dont seem to get 3G anymore sometimes it comes up BUT only when outside.
When the phone was Voda branded I got excellent 3G coverage with Orange Internet.
Any help would be great.
Regards
James
Probably your APN settings.
First of all thanks for the help that you provide to us the newbie’s
And since I’m a newbie I have a lot of questions let’s see if you can help me.
I will be very happy if you can
First I have a Verizon XV6700 suppose to be unlocked but it isn’t (sprint Boot screen)
Since I don’t know what HTC version is it I can’t find how to unlock this device
Device Info
ROM Version 2.06.00 WWE; ROM Date 02/22/06; Radio Version 1.27.00
Hardware Version 00.41
Hardware info
CPU Intel PXA270; Speed 416 MHz; RAM 64 MB; Flash 128 MB; Flash Chip M-Systems
1.- How can I know wish HTC do I have (Wizard, Artemis .etc)?
Searching the forum I think I have the HTC Apache: XV6700, PPC-6700
2.- How can I be sure? Thanks
3.- Is there a Tool to unlock this device? Or can I use the Wizard?
found this (can't post the link) but all the links are broken
I know now that this is an old phone but it’s a Birthday present from one of my daughters
And I don’t want to make her feel bad
Thanks for any help that you can give me
Found one Hope it helps some one else
HTC Wallaby* (branded as O2 XDA, T-Mobile MDA, Qtek 1010, Dopod 686, Telefonica TSM400, Siemens Cingular AT&T SX56)
HTC Falcon* (branded as Sprint Audiovox PPC 5050)
HTC Himalaya* (branded as O2 XDA II, T-Mobile MDA II, i-mate Phone Edition, Qtek 2020, Dopod 696, Orange SPV M1000, Vodafone VPA, Telefonica TSM500, Krome Navigator F1)
HTC Blue Angel* (branded as O2 XDA IIs, T-Mobile MDA III, i-mate PDA2k, Qtek 9090, Dopod 700, Orange SPV M2000, Vodafone VPA III, e-plus PDA III, Tata Indicom EGO, Siemens Cingular AT&T SX66)
HTC Harrier* (branded as i-mate PDA2k EVDO, Sprint Audiovox PPC6600/PPC6601, Verizon VX6600/VX6601, Daxian CU928)
HTC Magician+ (branded as 02 XDA II Mini, T-Mobile MDA Compact, i-mate JAM, Qtek S100, Dopod 818, Orange SPV M500, Vodafone VPA Compact, Krome SPY)
HTC Alpine* (branded as 02 XDA IIi, i-mate PDA2, Qtek 2020i, Dopod 699, Orange SPV M2500)
HTC Apache (branded as Sprint UTStarcom PPC6700, Verizon XV6700, Alltel UTStarcom PPC6700)
HTC Wizard (branded as O2 XDA mini Pro, T-Mobile MDA IV, i-mate K-JAM, Qtek 9100, Dopod 838, Cingular 8120/8125)
HTC Universal (branded as O2 XDA Executive, T-Mobile MDA Pro, i-mate JASJAR, Qtek 9000, Dopod 900, Orange SPV M5000, Vodafone VPA IV)
HTC Prophet (branded as I-mate Jamin, Qtek S200, Dopod 818 Pro, Orange SPV M600)
HTC Artemis (branded as HTC P3300, MDA compact III, Xda orbit, Dopod P800W, Dopod P800)
now I know what I have
Now after reading for more than a week
1.- I did try to flash it with the PDAJ Apache WM6.1 v2.02 without luck leaving the phone in Boot loader mode where you can read serial and V 2.0
2.- did connect the phone to the PC and you can read the connection USB in it then every time I try to flash it I get the error 150 this is not for this device or something like that
3.- After numerous attempts finally did flash it with the APA_VZW_20720_206_11000_WWE_Ship and in did it work
4.- at this time if you plug the phone to the PC you can see the main Disk (ROM I think) and the memory only so I keep trying to flash this with a generic one with the same results 150 error
5.- What I did was did change all the RUU the UI and the ROM Upgrade Ut with the nk.nbf of the generic from the APA_VZW_20720_206_11000_WWE_Ship to the generic and I have now the Generic one in the phone Windows Mobile 6 Professional CE OS 5.2.1620 Build 18125.0.4.2
ROM version 3.50.00 WWE radio 1.10.00 ExtROM version 2.07.206 WWE
6.- If I plug the phone I can see now the ROM the ext ROM 2 and the memory
My question how can you change this to be use it with another SIM (company) ?
Thanks
the phone does have a sim card tray
so it insn't a CDMA.
Thanks for the add info.
now Im' not sure
Removable User Identity Module (R-UIM) is a card developed for CDMA handsets that extends the GSM SIM card to CDMA phones and networks. To work in CDMA networks, the R-UIM contains an early version of the CSIM application. The card also contains SIM (GSM) application, so it can work on both networks. It is physically compatible with GSM SIMs and can fit into existing GSM phones as it is an extension of the GSM 11.11 standard [1].
This interface brings one of the main advantages of GSM to CDMA network phones. By having a removable identity card, CDMA users can change phones while keeping their phone numbers by simply swapping the cards. This simplifies many situations such as phone upgrades, phone replacements due to damage, or using the same phone on a different provider's CDMA network.
The R-UIM card has been superseded by CSIM on UICC. This technique allows all three applications (SIM, CSIM, and USIM) to coexist on a single smartcard, allowing the card to be used in virtually any phone worldwide that supports smart cards.
The CSIM application, a port of R-UIM functionality to the UICC, is defined in standard [2]
This form of card is widely used in China under the CDMA service of China Unicom (The CDMA service of China Unicom was acquired by China Telecom in 2008) . However, it is also used elsewhere such as India, Indonesia, Thailand, and Japan.
I can see in the phone that the DATA TRANSFER in all the ROMs that I can find is EVDO or 1X I can find one with GSM with EDGE or 3G
Data transfer
CDMA: The best data transfer technology it has to offer is the EVDO technology, allowing for a maximum download speed of about 2mb/s (about 700kbps in practice), which is similar to what a DSL line has to offer. EVDO is not available everywhere yet and requires a cell phone that is EVDO ready.
GSM: Offers EDGE, allowing for a maximum download speed of 384kbps (around 140kbps in practice). More technologies are being developed on top of EDGE such as HSDPA to boost the transfer rate to over 384kbps in practice. This technology requires an EDGE-ready cell phone.
CDMA offers faster data download and would therefore be the favoured choice for data transfer. GSM is catching up fast however, but its EDGE technology
Is there a way to enable the EDGE or 3G on this phone?