got my i780 for a week. everything is fine except a2dp.
after connected to my itech clipradio, a2dp seems working properly.
However, if a call is made/received, then all a2dp sound will always be diverted back to rear speaker.
(The only exception is that (1) music is being played when the call is made/received and (2) wmp is used as the player. Under that condition, a2dp will retain and music resume.)
is it only me or is this a common problem? any suggestion? many thanks.
Update: figured out that the problem was due to compatibilty with itech clipradio. tried and bought a jabra bt3030 and worked just fine.
Related
I have tried 2, Moto H500 and H700 and they both do not work with my TyTN. My car bluetooth connection had no problems.
My radio version is 1.03.03.10
moto ht820 works
The motorola HT820 works perfectly with my Trion. Especially with the A2DP improvement hack the sound is really clear play pause fwd rew all work and with assigning voice command to work with the call button works as well. Only thing I cant get working is Skype over the bluetooth headset. I assume when skype is loaded the profile thinks it is a Stereo profile so the mic doesn't work, Does anyone know a registry hack to enable the headset p[rofile with programs suh as skype?
Jabra BT250 is working perfect.
Please note there is a dedicated TyTN forum now, you can stop using general.
iTech S38 Clip Headset works good... even the A2DP is good without breaking up or crackling noise.
nextlink bluespoon working just fine here...
R
BlueAnt X5 works good
HI guys,
I just bought a Blueant X5 headset and it works great with the Hermes with no probs. no skipping, excellent quality, able to dial/answer calls while listening to music, control WM player through the heaset (play, stop, next prev, etc)
Cheers,
EDIT: I returned as one of my speakers sounded squelchy (like my old CB radio days). Too bad they didnt have any more in stock so i got a refund. Other than that, it worked fine.
Hi there!
I got my Trinity about 2 weeks ago and got I love that thing...she is so beautiful!
Yesterday I got a good deal on a Sony Ericsson HBH-DS200 Bluetooth Audio Device.
It connects via A2DP and then you can connect any std. 3,5mm jack headphone.
After I pair the devices everything works fine, handsfree and wirless stereo!
Now I disable Bluetooth and turn off the DS200 to shut it down.
Next time I restart Bluetooth and the DS200 it switches to Bluetooth Audio and all is well. But as soon as I try to play music it "skips" in 2-3 sec. jumps. This is as you can imagine not acceptable.
If I delete the conn. and repair it...it works again..up to the point where I turn it off and then on again.
Anybody have an idea?
thx!
pls search a2dpfix to sovel this bug.
but, it will make up to 90% cpu rate.
I got the HBH-DS200 headset, for music it works all fine.
But when i use it in a call the sound are really crappy. A lot of noice and very low volume.
I have tried my headset with other phones without this issue. does anyone have a soluton to have the same clear sound in a phone call as i have when lissen to music
I got the HBH-DS200 headset, for music it works all fine.
But when i use it in a call the sound are really crappy. A lot of noice and very low volume.
I have tried my headset with other phones without this issue. does anyone have a soluton to have the same clear sound in a phone call as i have when lissen to music
(Sorry i dident see this was wrong forum. Its a Tytn II i have)
Hi all, I have had this bug in varying flavours with both the Wizard and now the Kaiser.
If I make a call via Bluetooth (certain devices only e.g. JVC in car stereo), after the call, all audio is lost on the device when using the speaker, e.g. no ringtones, no TomTom voice guidance.
Strangely the touchtone sounds on the phone dialler continue to work.
Making another call via Bluetooth works fine and all audio is heard, but not if calling via the earpiece of the phone.
It is like Bluetooth is 'stealing' the audio from the phone's speaker (which is should), but not giving it back at the end.
Currently am running WM6.1 Sleuth 3.0 on the TyTN II. Any advice appreciated.
Hey All,
I have a Diamond, and a cardo rider Q2 for my motorbike helmet. They pair up nicely for phone calls, but I cannot get music to stream to the helmet.
All other functions work fine. If I press a button on the phone the sound of the button comes through.
The annoying thing is that my friend has a N95 and it works just fine, so I know the headset is capable.
Is there some setting that I need to change? Or a download to fix this?
Any help would be appreciated. And please take it easy on me as I am not very capable with technology.
Thanks In advance
Adam
Adam,
Double click on the icon of the paired headphones on the bluetooth screen and make sure that Wireless Stereo is ticked.
The system is using two profiles- one for phone calls (headphones) and the other for music (Wireless Stereo). Yout helmet BT earphones should be able to switch in between as long as they are enabled.
CD
Hey CD, thanks, I tried that, but..
When I do that it only gives me the option of "hands free".
If I plug in my wired HTC head phones while maintaining the blue tooth connection to my helmet and play music the music comes through the wired headset, but when I try to voice activate an outgoing phone call the music changes from the wired headset to the bluetooth headset temporarily.
I have the same problem (posted on another thread) Jabra 320's I use to cycle to work, worked OK with my SE W880i. But like you the TD only registers 'hands free', I have checked the profile in BT and it only shows hands free, there is no BT Stereo box to tick/untick. I have tried installing/uninstalling and using a third party BT program (recommend in a previous thread) and have just upgraded to the new official Rom all to no avail.
I think the TD likes some stereo headset's but sees some others as just a mono handsfree unit.
dave.ski said:
I have the same problem (posted on another thread) Jabra 320's I use to cycle to work, worked OK with my SE W880i. But like you the TD only registers 'hands free', I have checked the profile in BT and it only shows hands free, there is no BT Stereo box to tick/untick. I have tried installing/uninstalling and using a third party BT program (recommend in a previous thread) and have just upgraded to the new official Rom all to no avail.
I think the TD likes some stereo headset's but sees some others as just a mono handsfree unit.
Click to expand...
Click to collapse
I have the same Jabra 320's... finally got them working as Wireless stereo pressing the main button again and again during pairing... I didn't know it was going to work - It was out of frustration!!!
I tried several times with my 320's (deleted, re-installed, tried different ways/software) all to no avail.
There is a software upgrade for the 320's on the Jabra site but you need a special usb connector to flash the unit.
In the end I picked up the newer BT3030 cheaply on e-bay and they were recognised straight away as Handsfree and stereo BT streaming.
Both the 320's and 3030's have the A2DP profile, so not sure why the don't see the 320's correctly?
So happily cycling to work again with the BT3030 and listening to BT stereo.
In order for you to do what you want your headset must support A2DP Bluetooth profile (and even if it does it may not work!). That is the profile needed to send stereo music from the HTC. Most handsfree units do not do that - they just support headset and handset Bluetooth profiles.
There is a utility available called BTMusic that can be downloaded free from here. This will allow music to be sent using the headset or handset Bluetooth profiles, and it worked with my Parrot car kit, so it may work for you. The problem is that it is mono only and the quality of the sound is not brilliant - after all these profiles were never designed for that.
So the alternative is to find a new headset that supports both handsfree and A2DP profiles and works with both.
umm yea... i went through EVERY SINGLE thread this thing has. none of the programs work for me period.
I've noticed issues with the A2DP side of the Bluetooth connection. Voice is fine but music Idoesn't always connect, I'll have to reset the connection to get the A2DP going.... Anyone experiencing this?
mine works fine with 2 different pairs of headphones. Sorry to hear you're having issues.
works fine here with stereo bluetooth headset. might be your external device