But I accidentally hit "Do Not Show This Again". How do I get it to show again?
You can set it in Start->Settings->Phone->Advanced(tab) and click the "Add new phone number to Contacts at end of call".
I've done that, then I call a random number, and when I hang up it doesn't ask me. I don't let it ring, maybe I'll try that.
Nope, nothing.
Did you try a soft reset? (stylus in the hole on the bottom to the right of the usb port)
thehyecircus said:
I've done that, then I call a random number, and when I hang up it doesn't ask me. I don't let it ring, maybe I'll try that.
Nope, nothing.
Click to expand...
Click to collapse
Maybe call a new number not in your contacts, have them pick up and then end the call, it might trigger the event. Ask a store how late they're open or something.
if i'm not mistaken, it will only trigger after an incoming call from unknown number ended.
or from phone dialer when u dial numbers that dont hv any matching number pattern in ur contacts list.
Hi,
When we are making a call from phone dialer, it shows the call history and matches any contacts or previously dialed number.
When i am already in a call, there are two options.
"Keypad" and "End Call"
If i select the "Keypad" option it takes me to the phone dialer, but this time the caller history is not displayed there, its a blank phone dialer.
Is there any way that we make it to display the call history even when we select the "Keypad" option during a call..
I need this, since i use some calling cards to call overseas, so, i need to call a number then enter the pin number and finally the actual phone number..
If the call history is shown there, i can use it to see the actual phone number which i need to call..and easily use it....
now i always need to note-down the numbers and then make a call... or switch between the History Tab and Dialer Tab to get the rite number.
Thanks and sorry for the long story.
Yes please i want some way to get this working too
puri1 said:
Yes please i want some way to get this working too
Click to expand...
Click to collapse
I need same problem with resco contact
when I click end button My HD2 going to HTC Phone and Call History
I need to: when I click end key open resco contact call history or close all.
puri1 said:
Yes please i want some way to get this working too
Click to expand...
Click to collapse
I need same problem with resco contact
when I click end button My HD2 going to HTC Phone and Call History
I need to: when I click end key open resco contact call history or close all.
on my HD2 I can push either menu or persons (left or right softkey)
eaysier is the left one
in the next window I can srcoll to to right and ther i have my call log of all calls (Missed, called, received)
Which Rom Do you have installed?
Owned this phone for bout a week and been constantly playing with it and love everything bout it except the phone/dialing feature....coming from a blackberry, the phone/dialing just makes sense and works. Couple gripes I'm having:
1. Speed dial, I can't by default just hit 2 or 3 but I have to click off the "X" above the number pad before I can use speed dial. If I just long press 2, it would still think i'm trying to dial out a number and not speed dial.
2. In the same "phone" screen they have recently dialed incoming/outgoing calls but it just shows a picture or no picture depending if I have them, but they don't show the numbers. I have to use the optical pad to scroll though to show the number, I can't even you my finger to swype through cause it will automatically dial the number without me knowing who i'm dialing specially if I have no picture or number.
3. The "Faves" is kinda redundant cause it shows the recently dialed people same as the "Call Log". I know you can put your favorite people on the top list but still...kinda redundant.
4. I can start dialing a users name via the dial pad and it would find the person I'm looking for, what happens when that contact has multiple numbers, if I click on the contact from what it found via dialing his name in the dial pad it would just dial the cell number; won't give me options to dial his home, work etc. Just dials the cell number by default.
This is just some of the stuff I can point out right now. But its just not very intuitive and I have to go through multiple taps just to find someone, dial someone in my contacts or know where to look before I can dial out.
If there is an app for the phone that I can use to replace the built in "phone" feature, that would be great. Just not crazy bout how the Phone feature which should be the most important feature on a "smartphone" is so poorly layed out.
Thanks for any info....
I agree the mySense phone app is not the greatest, and probably stock froyo app is bit easier to use.
What about the speed dial, you you can hit menu on your home screen, than add to home/ shortcut / direct dial - choose contact - choose phone number . It will creat a speed dial icon on the home screen. Also you can create a folder and group them, like "Work" "Family" etc.
I like the phone/contacts application much better in what Cyanogen has in his ROM. It's simple and super fast, the one included with our phone is complicated and clunky.
I need to add that to my list, not a deal breaker, but definitely needs an overhaul.
Nutzzer said:
Owned this phone for bout a week and been constantly playing with it and love everything bout it except the phone/dialing feature....coming from a blackberry, the phone/dialing just makes sense and works. Couple gripes I'm having:
1. Speed dial, I can't by default just hit 2 or 3 but I have to click off the "X" above the number pad before I can use speed dial. If I just long press 2, it would still think i'm trying to dial out a number and not speed dial.
2. In the same "phone" screen they have recently dialed incoming/outgoing calls but it just shows a picture or no picture depending if I have them, but they don't show the numbers. I have to use the optical pad to scroll though to show the number, I can't even you my finger to swype through cause it will automatically dial the number without me knowing who i'm dialing specially if I have no picture or number.
3. The "Faves" is kinda redundant cause it shows the recently dialed people same as the "Call Log". I know you can put your favorite people on the top list but still...kinda redundant.
4. I can start dialing a users name via the dial pad and it would find the person I'm looking for, what happens when that contact has multiple numbers, if I click on the contact from what it found via dialing his name in the dial pad it would just dial the cell number; won't give me options to dial his home, work etc. Just dials the cell number by default.
This is just some of the stuff I can point out right now. But its just not very intuitive and I have to go through multiple taps just to find someone, dial someone in my contacts or know where to look before I can dial out.
If there is an app for the phone that I can use to replace the built in "phone" feature, that would be great. Just not crazy bout how the Phone feature which should be the most important feature on a "smartphone" is so poorly layed out.
Thanks for any info....
Click to expand...
Click to collapse
I cannot recreate any of your problems on my phone dialer.
Speed Dial can be achieved easily two different ways. In the phone app, select menu and speed dial. Add new will be at the top of the screen. Select from contacts and choose a speed dial number. Long pressing on that number, regardless of what is in the screen above (blank number or last call) will dial the contact attached to that speed dial number.
Another method is to long press on the number while editing a contact and selecting speed dial.
The 'last call' at the top of the dialer should always show at least the number,unless it was blocked.
Faves is the same as Favorites on the vanilla dialer. Put your favoite called numbers here. It is a lot quicker than using contacts. I hate the faves app but the dialer function is fine. As far as the recent calls, those are actually the most frequently called numbers and you can set that to just one by pressing menu>edit smart group and selecting the number of members.
Your number four is quite fixable. If the contact has multiple number, it will dial the Primary one, which you can choose the first time you call a contact. Alternatively, you can press on the icon on the right side that looks like a contact card. It pulls up the contact and you can select a number from there.
I prefer the vanilla or CM dialer much better myself but because CM does not have a ROM that works for me yet (the phone app does not work for me) I learned all I could about the only stock alternative.
Hope this helps.
Nutzzer said:
This is just some of the stuff I can point out right now. But its just not very intuitive and I have to go through multiple taps just to find someone, dial someone in my contacts or know where to look before I can dial out.
Click to expand...
Click to collapse
Also...
To search contacts you have to tap the spyglass. WTF? Why isn't the search field just there?
Each entry in the contacts is too tall. Give me the option to make it thinner. In the taller entry, add some information, such as shown in the My contact card, the default phone # for instance.
Favs is worthless. Allow me to dump it.
In the phone, I *do* like the 'start typing out a name' but it would be nice to be able to long press to pick the #, as someone said. At least it does something useful (mostly. Add to Faves is pointless).
DO NOT always show the last caller or callee at the top. That can be nice, or it can be embarassing.
Allow me to delete all of a certain # from my call log, not just individual iterations. At least this phone doesn't redial the last # all the time like my friend's iPhone does, and my other friend's MyTouch (plain version).
However, it redials too easily. So if I talked to my folks earlier and then at night I'm getting this post ready and they are asleep and the damn thing redials, well, that's bad.
If I start tapping out a number, let me edit it, say using the trackpad. C'mon, this is obvious!
And while playing with this, it got stuck in Searching contacts. And if I want to dial a number, how do I do that? At the top, Save to People. No number displayed, no people icons. Enter name or number/Tap to see smart dial tips. WTF? Time to reboot or something.
How about a remapping genius to search (as it should have been) and long-press on search brings up phone? Or something. I hate how with a normal POS phone I can dial. With this I have to go to the home screen or unlock the screen & log in, then press a button, then finally I can call.
I use Quickdial for my contacts that I call quite a bit. Nice app and allows 36 contacts.
I personally do not like the built in dialer. It is rather clunky to use witht he buttons on the bottom and if hands are rather large, it gets tricky sometimes hitting the phone button and the call button.
Have not found a good replacement yet.
I started using "Dialer One" and I like it better than the build in dialer. Its simple and it works...not the best but better. Also, started using Google Voicemail so everything pretty much works the way its supposed to now.
This is my first Android phone, and my experience is so far ok, but kinda annoying that I need to research, investigate and try out a dialer just to make the phone work.
I also like Dialer One and use it as both a dialer and address book replacement. If you set it to show your favorite contacts on the default screen there's minimal clicking. It also supports using your background image, pretty cool.
I hate the stupid Faves feature of the phone as well. Especially for SMS. Why does it need to explicitly notify me that one of my Faves messaged me? The new message notification by itself is sufficient.
excarnate said:
And while playing with this, it got stuck in Searching contacts. And if I want to dial a number, how do I do that? At the top, Save to People. No number displayed, no people icons. Enter name or number/Tap to see smart dial tips.
Click to expand...
Click to collapse
Ah joy, it seems I found a bug. I reported it to T-Mobile, they gave me a # for HTC and I'll try pursuing that (if someone has a bugreporting URL for them...). My phone is perm-rooted, I'm not running (gasp, the horrors) a task killer.
Go to Phone (home screen, press picture of phone). You should see your last call at the top.
Tap out some numbers, say 55555.
Decide you wish to edit those numbers (the 2nd 5 should be a 5) and use the trackpad to move over to the left.
Unexpected behavior: it moves to Faves, then Contacts.
OK, fine, no biggie, now use the trackpad to move back to Phone.
Bug 1: Notice there is no number displayed and it says at the top that you have matches for n of your contacts where n is the total number of your contacts. Apparently the number typed is lost. Sucks but minor.
Bug 2 (often, not always): Tap out another number. Note that often (usually for me) you can not see any number. I believe it also shows that I'm still matching all of my contacts (it isn't reproducing for me currently).
I wonder if anyone else can see this, or if my phone (or if I got confused. It happened after rebooting as well, but isn't happening now.
There is an issue while on phone call. The dialpad doesnt have a back button.
Is there any fix for this problem??
Please refer the below link to understand the problem better.
http://code.google.com/p/android/issues/detail?id=33393
saroj405 said:
There is an issue while on phone call. The dialpad doesnt have a back button.
Is there any fix for this problem??
Please refer the below link to understand the problem better.
http://code.google.com/p/android/issues/detail?id=33393
Click to expand...
Click to collapse
Buddy, actually your problem is you are choosing number keypad while calling. This work only in Add call button. Just choose add call & you will find it. It doesn't exist in dialpad while calling.
kataria.vikesh said:
Buddy, actually your problem is you are choosing number keypad while calling. This work only in Add call button. Just choose add call & you will find it. It doesn't exist in dialpad while calling.
Click to expand...
Click to collapse
What if i need to dial another number from the number keypad, but type in a wrong number, I cant delete it or even erase the whole number.
saroj405 said:
What if i need to dial another number from the number keypad, but type in a wrong number, I cant delete it or even erase the whole number.
Click to expand...
Click to collapse
Nup buddy. you just need to go to Add call then there will be a dialer pad which is same like before. you can edit the dialed number also.
I dont know how to see call duration history?
netvlada said:
I dont know how to see call duration history?
Click to expand...
Click to collapse
go to phone next to each number is ''i'' on right side , tap it the picked person card will pop up and just hapilly slide down for details
Don't worry, guys at huawei didn't forget for basic things , they are smart .. ppl don't read instruction manuals ..etc..
Thanks.
There is enough free space left from info to show call duration,not to go for second or third menu to see call duration.
hi, what about when it was a private number. i have tried going to where would usually find call log and duration time but it does not provide any record at all?
Hello I don't find old call history even I've never deleted it
netvlada said:
I dont know how to see call duration history?
Click to expand...
Click to collapse
Download call log from play store that's it..