Just a silly question. Can someone explain all the different roms he has? There are the following and I have no idea what the difference is between them.
1) Official WM6.1 Release
2) Dutty's Official WM6.1 5.2.19716 UC RTM X2 variants
3)Official WM6.1 5.2.19199 UC RTM x3 variants
4) And then there is a lot of talk of the hybrid.
Is anyone else as confused as I am?
argoldst said:
Just a silly question. Can someone explain all the different roms he has? There are the following and I have no idea what the difference is between them.
1) Official WM6.1 Release
2) Dutty's Official WM6.1 5.2.19716 UC RTM X2 variants
3)Official WM6.1 5.2.19199 UC RTM x3 variants
4) And then there is a lot of talk of the hybrid.
Is anyone else as confused as I am?
Click to expand...
Click to collapse
You could read the changelog located in the first post for each one of the roms you have listed. I was about to answer your question and then a lazy spell came over me and I didn't feel like doing all of the searching around, copying, pasting and posting. Then it hit me, you could read them as well as I could.
I don't think you really understood my question.
Yes, I know that you can look at the changelog and see what changes he has made from the previous base rom. But that does not explain if they are different versions.
Is the hybrid a completely different rom then the official wm6.1 rom? Are these all just updates of one single rom or are there various roms that dutty updates.
If there is only one rom, then please just advise me so. If there are several different core roms (each of which he updates), then could someone explain the difference of each to me.
In simpler terms, are the four roms I listed all just updates of the same rom, or are there core differences in them?
Thanks in advance.
Core differences in them. Some have different OS.
Dutty explains in detail each ROM on the first page. P1Tater answered one of the main differences. Read each first page of Dutty's post and compare the differences.
Closed... RTFF...
Why Ask Why? Just accept that it is what it is...
I have been on the KaiSer forum for the last few months. As from my signature below, I have been lurking for a long while at the Universal forum. Thus, my acquaintance with master-chef Leo.
The first thing, I did when I got my att tilt early this month was to install the Hard SPL and then install L26_WM6.1_PRO v1 (Based on the AT&T 209 build) from the following thread:
http://forum.xda-developers.com/showthread.php?t=381837
When I tried to install the IMAGiNet Arabizer, it didn't install at all. Being a ROM flashing junkie from the Universal forum, I wasn't surprised at all. I had encountered this problem once in the past, even though clearing the prior install after the new flash
I encountered the same problem with Leo's v2, which was recently released on 24 April, 2008.
Being a flash junkie, I tried some of the Dutty's ROM released from during March and April. Didn't encounter any problem with these ROMs.
During April the TNT 19202 Series ROM was released too by Its Right. The IMAGiNet Arabizer didn't install with this ROM too.
http://forum.xda-developers.com/showthread.php?t=385900
But, I could install the InforMobility Arabizer on all these three ROMs, two by Leo and one by Its Right.
Both these IMAGiNet Arabizer and InforMobility Arabizer are paid programs and come with several modules. IMO the IMAGiNet is a better product than InforMobility.
Secondly, one of the beauty of KaiSer ROMs is that they are UC capable. Thus, it is frustrating that during the SDConfig process a software refuses to install as this knowledge is not previously known.
I have uploaded the two main modules for the IMAGiNet Arabizer. They have a trial period of one month.
Can some of the masters on this forum and everyone else help to resolve this problem that why the IMAGiNet Arabizer doesn't work on some ROMs?
Many thanks in advance!
KOR!
Also, this is what I found on Leo's ROM. I am not sure if the problem is related to the above.
odyseus said:
Anybody tried using Wifirouter v1.01 with this build?? Because I cannot install this application (Installation unsucessfull)??
I was able to install this application on dutty's builds etc???
Cheers Ody
http://forum.xda-developers.com/showthread.php?t=381837&page=37
Click to expand...
Click to collapse
It all has to do with the 19209 build. I am able to install all the programs you listed without any problems using Dutty's April 1st Hybrid ROM. I also was able to install and use iGO 2006 and MSVC.
One thing though, MSVC will stop working after a couple of uses if it is mapped to the PTT button, or any button that has the press and hold capability. So I mapped the MSVC to button # 4 ( OK Button).
I am using a 8GB Micro SD Card as well, however, when I create a folder on the SD card, any dll file that I save there will NOT show or display!
I have tried all ROMs there is and finally realized the best ROM for my purposes is Dutty's April 1st Hybrid.
Just my 2 cents...
Hi Asfoor,
Thanks for your reply.
Excellent observation!
I am not sure, as I believe that Dutty's April 9 and updated April 16, is a hybrid ROM 19209.
So, is Leo's v1 is a hybrid ROM 19209.
And more importantly, why doesn't IMAGiNet Arabizer install on 19209 ROM?
Thanks,
Mohamed
It is not related to any build, Imaginet Arabizer is not compatible with WM6.1.
Version 3.42 runs perfectly fine on all WM6 roms but will not run on WM6.1
Regards.
Tomtom
Love the ROM and it works great! No problems yet. Better then Duttys I think
Can anyone link me to a Tomtom download that will work for this ROM please?
Also, are there any threads or sites that list optional appz that can be installed on this ROM?
Mohamad, Just flash with this ROM:
http://rapidshare.com/files/104126132/Ruu_Signed_Duttys_WM6.1_Hybrid_1.64.08.21__RTM_.zip
I have tested almost every ROM ever cooked and found this ROM to be the most stable and robust. the radio combo is is paramount; 1.64.08.21. Just try it and you will be pleased. And if you install the new HTC Home Customization program you can keep changing the icons and themes and it will feel you have a new ROM altogether...
shafez said:
It is not related to any build, Imaginet Arabizer is not compatible with WM6.1.
Version 3.42 runs perfectly fine on all WM6 roms but will not run on WM6.1
Regards.
Click to expand...
Click to collapse
Not true... I have it on my WM6.1 Hybrid and working fine (or as intended for it to work), using the Rom I just pointed to via Rapidshare.
I also find that In4mobility is better than Imaginet Arabizer, as the issues with Imaginet are mutually suffered by all WM Versions; Stability issues, Freezing, and slowness.
Hi KOR,
V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
King of Rapture™ said:
Hi Asfoor,
Thanks for your reply.
Excellent observation!
I am not sure, as I believe that Dutty's April 9 and updated April 16, is a hybrid ROM 19209.
So, is Leo's v1 is a hybrid ROM 19209.
And more importantly, why doesn't IMAGiNet Arabizer install on 19209 ROM?
Thanks,
Mohamed
Click to expand...
Click to collapse
Laurentius26 said:
Hi KOR,
V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
Click to expand...
Click to collapse
The problem is that windows refuses the installation giving the error "installation unsuccessful". It may be related to certification or something like that. I believe a chef like you can get it for us as many of us are not using some good ROMs for that reason.
Thanks
Laurentius26 said:
Hi KOR,
V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
Click to expand...
Click to collapse
Leo... Good to see you here... also excited about your release on Monday for a new build ROM. Keep us posted. I am wondering if you are gonna do without HTC Home this time around.
Welcome Mohamad in Kaiser forum, nice to see u again in a new virtual world (u r my English tutor)
Mobidiv (the new name for imaginet) version 407 is working very nice with Dutty 26 April 5.2.19400 ROM. You can install it by UC straight forward with no problems. The problem is that the program is not free and we must buy it, Fejebi ein, is also not bad and stable but not so beutiful like mobidiv, but it is free for all HTC tytin II and i don't know if it is the case with tilt or not. So if u will buy i think it is better to pay for mobidiv.
Greetings
hbahaie said:
Welcome Mohamad in Kaiser forum, nice to see u again in a new virtual world (u r my English tutor)
Mobidiv (the new name for imaginet) version 407 is working very nice with Dutty 26 April 5.2.19400 ROM. You can install it by UC straight forward with no problems. The problem is that the program is not free and we must buy it, Fejebi ein, is also not bad and stable but not so beutiful like mobidiv, but it is free for all HTC tytin II and i don't know if it is the case with tilt or not. So if u will buy i think it is better to pay for mobidiv.
Greetings
Click to expand...
Click to collapse
Hi hbahaie, does Mobidiv 407 support the real keybord, cause I am using it a lot. thanks
walker said:
Hi hbahaie, does Mobidiv 407 support the real keybord, cause I am using it a lot. thanks
Click to expand...
Click to collapse
yes via the program AEKmap, the master TSD in ce4arab has a nice thread about all of the sory, please search for it there.
Imagent (=Mobidiv New Version) Arabizer is compatible on most (85%)of the roms
I had similar problem before (error installation)
The conditions needed for successful installation
1-Make Sure that you manually remove all Arabizer folders wither Imagnet or in4mobility from you storage card (if you installed any prior applications on SD)
2-After flashing any new rom, Arabizer Cabs Must Be the FIRST TO BE INSTALLED preferably on the main memeory.
I agree there are few roms you will not be able to succeed
Laurentius26 said:
Hi KOR,
V1 is a Hybrid my friend, it's a combi of the 19202 OEM and the 19209 SYS. Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
Click to expand...
Click to collapse
Hi Laurentius26
Thanks for your interest in helping us with this issue, I really like your roms
its my favorites actually
The problem with the Arabizer software (Imaginet/Mobidiv) is that it can not install , it will give an immediate message of (installation unsuccessful) as soon as I choose the destination drive.
this is true in almost all wm6.1 except all dutty's roms !
I thought the problem was with registry since duttys do a lot registry tweaks.. so I made a comparison between duttys registry and yours trying to figure out the differences... but no luck
I also managed to trace the CAB execution through IDA assembler to see why the file is refusing to install but no luck.. since I don't know how do this with a cab file... I usually do it with exe and dll
for now I am sticking with duttys rom since they are my only choice. and I really missed you ROMs
hbahaie said:
Welcome Mohamad in Kaiser forum, nice to see u again in a new virtual world (u r my English tutor)
Mobidiv (the new name for imaginet) version 407 is working very nice with Dutty 26 April 5.2.19400 ROM. You can install it by UC straight forward with no problems. The problem is that the program is not free and we must buy it, Fejebi ein, is also not bad and stable but not so beutiful like mobidiv, but it is free for all HTC tytin II and i don't know if it is the case with tilt or not. So if u will buy i think it is better to pay for mobidiv.
Greetings
Click to expand...
Click to collapse
Salam brother hbahaie,
Thank you for your welcome. Nice to see some old faces, it makes me fell home.
Sorry, to reply a bit late. Was doing some more research. The problem with both IMAGiNet and MOBiDIV is that they both refuse to install on Leo's ROM. Giving the message "installation unsuccessful". This is with Leo's all ROMs, whether hybrid or not. However, the InforMobility (Fejebi ein) does work on Leo's ROM and as you mentioned it is not so beautiful.
hbahaie said:
yes via the program AEKmap, the master TSD in ce4arab has a nice thread about all of the sory, please search for it there.
Click to expand...
Click to collapse
Thank you for your help on master TSD in ce4arab.
Mohamed
Laurentius26 said:
Hi KOR,
Maybe IMAGiNet Arabizer doesn't like keyboard skins? Just a taught! I'm busy busy busy but I will try to have a look.
I want to release V3 on monday based on the build 3.51.502
Thanks,
Leo
Click to expand...
Click to collapse
Hi mate,
Waiting for your release v3. Hopefully, you had the time by then to look into the IMAGiNet Arabizer. Thanks!
Regards,
KOR!
asfoor said:
Mohamad, Just flash with this ROM:
http://rapidshare.com/files/104126132/Ruu_Signed_Duttys_WM6.1_Hybrid_1.64.08.21__RTM_.zip
I have tested almost every ROM ever cooked and found this ROM to be the most stable and robust. the radio combo is is paramount; 1.64.08.21. Just try it and you will be pleased. And if you install the new HTC Home Customization program you can keep changing the icons and themes and it will feel you have a new ROM altogether...
Click to expand...
Click to collapse
Hi Asfoor,
Thanks for your recommendation. At various times I had Dutty's ROMs from March to April, all of them.
I will try again tonight before Leo issues his v3, the ROM you have recommendation. I have a big problem with all Dutty's ROMs, that once the bluetooth is connect, the ring tone goes to bluetooth and I miss all the calls (miscalls).
Maybe, some registry tweak?
KOR!
the Arabizer software Mobidiv not working on Laurentius26 lates rom release V3
it works however with duttys latest one
what is the secret behind this
I'm just having some issues getting all the features to work. Can't tell if they're working right or not.
shawndh said:
I'm just having some issues getting all the features to work. Can't tell if they're working right or not.
Click to expand...
Click to collapse
Are you kidding?
yeh, a senior member not using the search feature or looking in the first 3 pages of this forum. what a shame, everyone put on your flame retardant suits.
Dude, I haven't flashed a ROM in 6 months. I just got a Tilt 3 days ago and I've managed to try 2 diff custom ROMs and they both required you to install CABs on the storage card. Had problems laoding all the CABs.
I'm still reading trying to catch up but I'm at work.
cheetoh said:
Are you kidding?
Click to expand...
Click to collapse
^^^^^^^^^^^^^^^^^^^^^^^^^
soooo...
threads like
[15 November 08] HyperDragon III Raphael + Manila2D + YouTube . (Read First Page!)
[9 Oct 2008] ROM lite - FULL FR - Manilla 2D by Utopykzebulon
Announcement: Kaiser WWE D3D M2D MobileVista 3 Premium 5.2.20755B20755.1.0.1 by ansar
[11-17-08]RRE 5.2.19214(build 20748.1.4.0) Home and Manila 6.0 Minimal 1.0
tell you nothing?
(and that's just some of the First page ROMs....)
As stated Your Question has been answered.
Thread Closed pursuant with the guidelines set forth in the Kaiser Section Announcement and the Forum Policies.
hi some time ago i install the HyperDragon IV IOLITE CE OS 5.2.20765 Build 20765.1.4.4 by sakajati but now sakajati don't have new roms for TYTN II i search a new rom whit windows 6.5 very fast and stable some guys tell me this Ultimate-X2.V10 -23024|
New Rom
andresdr_2005 said:
hi some time ago i install the HyperDragon IV IOLITE CE OS 5.2.20765 Build 20765.1.4.4 by sakajati but now sakajati don't have new roms for TYTN II i search a new rom whit windows 6.5 very fast and stable some guys tell me this Ultimate-X2.V10 -23024|
Click to expand...
Click to collapse
No one can tell you what will work best for you, cause you know exactly what you want out of your phone. The best piece of advice that I or anyone else will give you is to flash a new ROM try for a view days if you like, great if not, then flash another. That is where the fun comes in.
Happy Flashing!
Have to agree...best advise is read and flash!
andresdr_2005 said:
hi some time ago i install the HyperDragon IV IOLITE CE OS 5.2.20765 Build 20765.1.4.4 by sakajati but now sakajati don't have new roms for TYTN II i search a new rom whit windows 6.5 very fast and stable some guys tell me this Ultimate-X2.V10 -23024|
Click to expand...
Click to collapse
and go here and read rules about starting new threads in this forum http://forum.xda-developers.com/announcement.php?f=378
andresdr_2005 said:
hi some time ago i install the HyperDragon IV IOLITE CE OS 5.2.20765 Build 20765.1.4.4 by sakajati but now sakajati don't have new roms for TYTN II i search a new rom whit windows 6.5 very fast and stable some guys tell me this Ultimate-X2.V10 -23024|
Click to expand...
Click to collapse
...and the question is ... ?
As you started your thread (and it was your 1st or 2nd post in your xda-life), you must take a good mortgage of it. Is your thread about a doubt on the way you must flash again ? About the differences between HyperDragon and Ultimate-x2 ? About differences between WM6.1 and WM6.5 ? About the best radio and SPL for this new flash ? This thread can give us a lot of juice, if you press it like a lemon. Please go back and post your Radio, SPL, and all your doubts which you think that can be important to be answered to share with other people. That's the way your thread will be useful.
I was missing when bought a Kaiser with PDA-Corner Ultimate and tried to flash another ROM. Lots of doubts assaulted me. I was afraid about bricking my device. Did not know if the radio was the good one, etc. Work about those doubts for you here and this thread will be interesting as many people will post links to "how-to" or "compatibilities"