Hi,
I own a Kaiser/Tilt with Windows Mobile 6.1.
One feature I missed from a previous phone (SE w810) , was being able to send DMTF tones of a contact's number, while on a call. Its a necessity for me cause I used calling cards.
So I was wondering if anyone knows a fix/cab that can add a option such as "Send DMTF Tones" , to the menu when u select a contact?
Thanks in Advanced
This is one I know of
Sunnysoft Calling Card
http://sunnysoft.com/software.php?idarticle=262
thx a lot. will try
There are various of these programs ... I remember a long time ago we had a discussion about them in the herald forum.. if I remember later when I get home, I'll try to dig up some other ones.
running a google search for calling card & windows mobile results in a few options for you
http://www.google.com/search?hl=en&q=calling+card+windows+mobile&btnG=Google+Search
Related
Hey guys,
I just started using Treo 750. I love it so far except few things I miss about my old Nokia. Earlier I used to dial a calling card number and then just choose the contact's destination number by selecting "Touch Tone" option from the menu while in call, and it would touch tone that number for me and I was connected. Now, WM5 phone app doesnt seem to be able to do it, and I have to write down the contact's number on a paper first before dialing calling card access number.
Also, I know a comma can be used a 1-second soft pause, but any possible way to add hard pauses in the phone number like traditional cell phones can do... Its cumbersome carrying calling card's PIN code in pocket, and then entering it after dialing calling card number and then punching in destination number from a paper again... its frustrating...
I tried to look up a lot of dialers and apps, but none was a helpful find. Could someone suggest any way out.
anybody???
http://www.google.dk/search?source=...c&btnG=Google-søgning&meta=lr=lang_da|lang_en
I am using a product called MagiCall which has the calling card feature as well as calls filtering and SMS filtering.
I think it can help you.
Hi there,
i've been searching for hours now but couldn't find anything working.
Usually I make phone calls from my mobile by calling my home number (which is free for me) and then being connected by my voip router, similar to using a calling card. In my Alcatel phone there is an option to use a general prefix where I enter the home number, a pause sign and the pin code. If that option is activated I simply use the phone book on the sim card and the prefix is used automatically. So I can activate or deactivate the calling card option whenever I want to.
Of course I want to have something similar on my MDA but all I could find were apps that either don't install/work on WM2003SE (Sunnysoft Callingcard, CCDialer, EZDial) or do not what I want them to (Mobidial).
Maybe somebody knows a solution?
Thanx in advance,
Harry
PS: I've got the most recent T-Mobile Big_Storage ROM installed.
Is there any way to make my device (HTC Touch) display full call history by default (not only missed calls)?
Thanks in advance for any help.
Mlh
First of all I think this does belong to the HTC Touch section.
Second, I don't know exact wich dialer is being used but as far as I know there are several ways to show the information you asked for:
1. When you open the dialer. Hit right soft key and press Call History.
2. When you open the dialer. Hit the right or up to show the Call History.
It's not HTC related. The call history (I am talking about) is part of standard Windows Mobile system and since WM 6.1 the call history is filtered to show only missed calls by default. :-(
Could you post a screenshot? I think it's the dialer that shows the missed calls...
This is a real bummer. i don't know if its an HTC problem or a Windows 6.1 problem, but I don't really care to see ONLY my missed calls when I click on "Call History" with windows mobile 6.0 i used to see all my calls - dialed received and missed.
Now it only shows me "missed calls" with the three click option of showing me "dialed, received or all" calls.
I'm using an HTC Tytn II.
Does Kaiser Tweak have an answer to this?
anyone find out how to fix this problem?
Full call Hystory
Windows mobiles devices are fully featured in many areas, but it is ironic that one of the ways in which they are limited is in the phone functions. This can be rectified with Handy Assistant, an application that monitors and manages your incoming calls. I had the same problem on my Sony Xperia and on the Htc Diamond 2. On top of that you can download Pontui Home 2, Icontact or IDialer. These 3 applications can make the job,I have the icons of those on the screen on Spb mobile shell 3.0. Unfortunately Handy Assistant is not free.
All the best
My topic was already deleted from one section.
I hope this time there will be sb who can help me.
The problem is with dialling numbers via bluetooth on my cell phone.
I tried to use activesync and the only program which I found :
Bluetooth PC Dialer 2.0
Unfortunately it ends always with error which is known for developers and they do not wanna do enything with it.
That is why I am forced to find different solution.
On this forum I found topic :
http://forum.xda-developers.com/forumdisplay.php?f=260
but this is only for PocketPC probably.
I would like somehow to assign ANY script, program with InstantMessenger in Outlook 2003 so I could choose phone number from contact via 'Call' Option (sometimes there are 2 numbers fix and cell) and call this number on my mobile via BT.
Could anybody help me with it ?
So Ive been using my HTC Ozone (6.5 Standard, 3VO rom) for a while in israel, and the way the cellular network works is as follows:
country code is +972
the number that shows up on an incoming call is 052-555-5555.
The number that shows up on an incoming text is +972-52-555-5555.
The number that shows up on an outgoing call when dialing without the country code (aka 052-555-5555) is +972-052-555-5555.
All of these differences mean that if I have a number saved in the contact manager (in only one of the above forms), it isnt displayed 2/3rds of the time. If i send a text to ME(052-555-5555), the reply comes back from an unsaved number, in a new thread is +972-52-555-5555.
Is there a way for me to just save the base number (052-555-5555), and have the phone's contact manager realize that its the same number is the +92 equivalent? My current workround is saving all the forms of a number to a contact, but 1. its tedium to go through all my contacts and do this, and 2. you can only save so many numbers to a contact, which means im screwed if the contact has two different numbers.
I see all these fields in the "current country" setting, but I have no idea what they mean, or if that is even the solution.
Any help would be greatly appreciated.
hey , i got the same problem on my Omnia 2 with windows mobile version 6.5
The local incoming call won't show the country code, and sms does the opposite way.
check through all my phone setting, can not find any related option for this.
Thanks for anyone can provide a resolution.
i just resolved my problem. hope this way can help you as well.
get a regedit software on your windows mobile phone.
go to HKEY_CURRENT_USER/ControlPanel/Phone
under it, you should able to see a key name "CallIdMatch", change the value to maybe 8 or 9, which means it will match the last 8 or 9 numbers for each incoming call or sms. (use decimal) after the changing, reboot your phone.
Wow, it worked!!
Thanks a lot man!
thanks for the tip jason_ma!
i was also wondering about it.
Anyone know how to edit CalIidMatch an an HTC hero