I've tried this on Two machines now and it's doing my head in.
I have a Tytn II running Dutty's latest rom. Everything I try to connect the Network USB Connection comes up but the Windows Mobile Device Center doesn't connect. MyMobile which I have to autoconnect does connect.
I've tried changing the to the USB connection in the USB to PC section of the control panel on the device. I've found that if I delete the Network Connection via Device Manager (on the PC) and then reconnect the device it then works but fails the next time.
I've found that if I terminate all the Windows Media Player instances before connecting then it works but then disconnects. I've tried rebuilding the WMP database on the PC so I'm now a bit stuck. How can I fix this so that it works semi-reliably?
Related
this is my 3rd PPC and i am completely desperate about his problem which i never had before. i can not connect my JAMin trough USB or Bluetooth or Infrared, my activesync turns green but after 2 minutes trying to connect it says that can not get connected, also i have tried on my laptop and i get something else when i cradle with infrared or USB my windows crashed while sync. i have no Idea thought it is because of my Antivirus and AntiHackers i have installed on both computers but i get the same error even if i disable them, I have tried activesyc 4.1 and also 4.2 but same result again,
Any Idea????
--
Do you set IP-Protocol for the Network connection with the Windows mobile device in network connections?
activesync
sent you a PM hope this helps
Thanx s2tephen,
i have Uninstalled my Antihacker firewall and it did worked perfectly,
just close any firewall
and try again
it did work with me
Hi guys,
Hope you can help me with this one
I can't ActiveSync with my PC & Laptop. The computer re-starts everytime I connect my JamIn.
I used USB cable & bluetooth to Sync, I got same issue of re-starting with both.
Please help
Thanks
I recently flashed my ROM from WM5 to WM 6. Thank you XDA. The problem I am having is now my Vista Computer won't connect with my MDA. Before the Flash it snyc fine. I uninstalled WMDC and reinstalled it and nothing. WMDC is aweful, Active Sync is great. Help maybe it is some kind of trick to get Vista to recognize it again with the new flashed WM6.
make sure you are using Active Sync. ver 4.5.....?
with some roms you have to uncheck the box "USB-PC" Found in settings/system/or sometimes found in connections,"USB-PC" and uncheck Enable advanced Network functionality. Then try and Sync
I can't use Active Sync with Win Vista. Any other suggestions..?
Then restore Vista to when it was working.
I'm also having trouble with Vista Ultimate (x64 and x32) and my Wizard (Octavoi's ROM)
It sees my device for a few seconds and then it closes.. The WMDC doesn't see my device at all...
The Event Viewer shows the following:
Windows Mobile-based USB device is plugged in but is unable to make a network connection to the desktop.
Click to expand...
Click to collapse
Windows Mobile-based device failed to connect due to communication (0x80072745) failure (see data for failure code).
Click to expand...
Click to collapse
Does anybody know how to solve this?
I've tried to uncheck the 'Advanced Network Functionality', but that also doesn't seem to work.....
Firewall could be the culprit.
Check your settings in your firewall. If you have Windows OneCare that would also interupt your connection with WMDC. But with any firewall program make sure that it allows or is in the trusted mode for any Windows Mobile Device.
I have Windows Live One Care but I don't think that's the problem.
I turned it off and tried to connect... without succes
But I'll give it a try again this afternoon.
i'm the other way, i went from vista to xp at work because of stupid autocad 2008 problems (don't get me started) and i prefer wmdc over activesync.. i have ver 4.5 and i have issues like it sometimes will randomly disconnect or won't complete a sync. other times i have no issue though. I never had a problem on vista with wmdc.
when i first hooked up my pda in vista it would load the driver in vista but, wouldn't connect, turned out it was loading an older driver and i manually updated to the newest one and just like that it was connecting, later i downgraded the driver to be able to update the rom and it was still working.
pyrorob said:
when i first hooked up my pda in vista it would load the driver in vista but, wouldn't connect, turned out it was loading an older driver and i manually updated to the newest one and just like that it was connecting, later i downgraded the driver to be able to update the rom and it was still working.
Click to expand...
Click to collapse
Where did you get the newer drivers from?
Try this :
Go to device manager in Vista
While connecting your wizard the device manager should refresh and add a 'MS Windows Mobile Remote Adapter'
Now right-click that adapter and choose 'uninstall'.
Vista will add the device again and soon after WMDC should connect.
At least it worked for me...
sysarck
sysarck said:
Go to device manager in Vista
While connecting your wizard the device manager should refresh and add a 'MS Windows Mobile Remote Adapter'
Now right-click that adapter and choose 'uninstall'.
Vista will add the device again and soon after WMDC should connect.
At least it worked for me...
sysarck
Click to expand...
Click to collapse
I tried the same, but without luck.
Ok, I've flashed my phone and now it seems to work with Octaivoi 6.3!!
Hi
I am trying to use my orbit 2 on O2 as a modem.
Bluetooth works! but it does not work when i plug my usb in.
i have active sync running and when i connect on internet sharing and plug usb in it disconnects from active sync
any ideas
cheers
tj
Its supposed to disconnect activesync, then re-connect as a ~network card, it will need to install some drivers first time round.
check in the network connections and see if its added a new network using a "Remote NDIS based Internet sharing device" if it has it should be working fine.
If not check the device manager as see if its installed the drivers properly.
Has anyone been able to get ActiveSync to work over Bluetooth in Vista with a 2125? Which English ROM will I have the best of luck with as my USB Bluetooth on my desktop computer running vista ultimate x86 keeps telling me that my phone doesnt support activesync over bluetooth.
Also where can I get the Stock Cingular ROM for my 2125?
Can anyone point to to a guide on how to set it up?
any ideas?
many thanks,
SG
No one has because you dont need Active Sync in Vista, Vista comes preloaded with Windows Mobile Device Centre
Sorry I meant to say "Windows Mobile Device Centre"
I cant tell if it is becuase of my USB BT Dongle or my 2125. When I try to esablish a BT ActiveSync connection from my 2125 it says there is no partnership setup with a computer that supports activesync. yet I believe my BT Dongle does.
Any ideas?
SomeGuy2008 said:
Sorry I meant to say "Windows Mobile Device Centre"
I cant tell if it is becuase of my USB BT Dongle or my 2125. When I try to esablish a BT ActiveSync connection from my 2125 it says there is no partnership setup with a computer that supports activesync. yet I believe my BT Dongle does.
Any ideas?
Click to expand...
Click to collapse
Have you done a wired sync with that computer before? If not, you should do it. I've read that in the past. It fixed a sync problem with one of my phones, however, I've done it w/o too and it works. Have you created a BT Partnership between your computer and your phone? When you create the partnership, click on Advanced, re-confirm the PC name, then on the Services Window, checkmark Active sync. Then open active sync on phone, and click on right menu and chose Connect via BT. It should work. Good Luck!
EDIT: The partnership has to be created from the phone, not from the PC. If created from the PC, as far as my experience, it'll create a Modem Dialup connection partnership that will allow the PC to connect to the internet via BT using Wap connection on your phone. If you do want to create that too, use *99# as the dialup phone number. Leave blank the User name and PW.
Thanks for the reply.
When I try to setup a partnership from the phone I see my computer but I only see 3 service. Stereo somthing, handsfree, and something else but none of which are active sync. Yet when I look on my computer I see that activesync is in the list and selected.
I have a IOGear BT211 (Broadcom 2045) USB Dongle running in Vista Ultimate SP1.
Could it be my BT211 Driver? I have the latest version 5.1.x
Thanks,
Well the new phone I bought has all the drivers for Vista on CD. But its installed on my son's Laptop and he don't let daddy get nearby his toys LOL so, I really couldn't help more. I do know active sync works over BT with Vista. So I guess you'll have to keep trying. Do you have any instalation CD for your phone? From what I remember, if you don't have the "Outlook" that comes with the phone instalation, you might not be able to. I remember it didn't work untill we installed the one on the phone CD. All though, his Laptop had MS Office already installed. So... take a look around that.
My Bad. I had the wrong Window drivers installed for my BT on my desktop. LOL. Who would have though that the Windows XP drivers wouldnt work under Vista? lol
Thanks for the help.
GD
activesync (Windows Mobile Device Center) via bluetooth on Vista
I went through a similarly difficult experience with a Lenovo laptop. I blogged about it here:
http://mitchwyle.blogspot.com/2008/11/activesync-via-bluetooth.html
Ok guys, here is the scoop:
I just purchased a new laptop with the following relevant specs:
Windows 7 Home Premium
Integrated Broadcomm Bluetooth Adapter
Windows Mobile Device Center 6.1
I am using the standard (non-modified) T-Mobile HD2.
When I try to pair the two, there is an error on the laptop talking about how the "Bluetooth Peripheral Device" driver did not install properly, but others did. I can use some functions of the bluetooth pairing such as going through the file system to the device and transferring files from the phone to the computer. However, Windows Mobile Device Center does not recognize the phone as "connected" even though the option to allow the phone to connect via bluetooth is selected.
Also, I can not go through my phone to "push" a file from the phone to the computer. Actually, any bluetooth related action fails if initiated through the phone.
I have searched for hours on this issue and can not seem to find a resolution that works anywhere on the internet.