Related
Have anyone a cab, tweak or something to change the software keyboard layout to spanish? I made the reg keys trick and worked for the hardware QWERTY keyboard, but I'm talking about the software keyboard... any way to change its layout?
Thanks in advance
Do you fix this problem?? I'm like you.
I used this and works well.
Hi,
I've flashed to windows mobile 6.1 and am stuck with a QWERTY keyboard layout. How can I switch it to an AZERTY ? I've added the Local string that works for WM6 but it doesn't seem to in WM6.1. Any ideas or tricks I may have missed out whilst searching ?
Regards,
Axet
Hi !
I'm using schap's Advanced Configuration Tool to do it:
http://forum.xda-developers.com/showthread.php?t=359380
Bye
Just tried and it didn't work. Are you certain that you are using a WM 6.1 rom and not a WM6 rom ?
I install this soft too :
http://forum.xda-developers.com/showthread.php?t=345426
I'm using ROM 6.03 with Radio 1.64 and it works !!
Tried that too but it hasn't worked (yes, I have performed a soft reset on the phone after installing). My phone is running WM6.1, CE OS 5.2.19170 (Build 19170.1.0.0). I installed Sleuth's WWE 3.0 ROM.
Well, i am french too, and i have a kaiser too and i can assure you that the cabs inside the thread listed above are indeed working with the rom, Sleuth 3.0, installed on my device.
I think you're in for a hard-reset.
Hi,
I am also looking for the azerty hardward keyboard, thus french, but well the Belgian French Azerty keyboard... Can anyone help me with that ?
I am using Dutty's DualTouch V4 RTM...
Thanks in advance...
It's buried somewhere in the following thread: http://forum.xda-developers.com/showthread.php?t=365066
Check out the posts from the last 4-5 days, it should be in there somewhere but can't locate it directly. The post contains the registry keys that you need to change. Good luck!
Here is what I found on the topic you gave me the link :
- HKCU\keyboard layout\Preload
Default = e001040c
- HKCU\keyboard layout\Preload\1
Default = e001040c
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
- HKLM\System\CurrentControlSet\Control\Keyboard Layout
Active = 0000040c
Worked fine for me. Thanks
mhhh I've noticed one problem with this fix, I can no longer use the "fn + space" combination to add accents to differents characters
Axet said:
mhhh I've noticed one problem with this fix, I can no longer use the "fn + space" combination to add accents to differents characters
Click to expand...
Click to collapse
I have the same issue :-(
Changed registery settings as indicated. Now nothing works (not a single button). Even the red and green buttons. Help
perform a hard reset to get back to how it was before.
anyone know how to fix the "fn + space" combination ?
Axet said:
Here is what I found on the topic you gave me the link :
- HKCU\keyboard layout\Preload
Default = e001040c
- HKCU\keyboard layout\Preload\1
Default = e001040c
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
- HKLM\System\CurrentControlSet\Control\Keyboard Layout
Active = 0000040c
Worked fine for me. Thanks
Click to expand...
Click to collapse
This one for the Kaiser
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
...(Shap's Advanced Config 2.1 XML will permit to do easily the trick)
I have performed all the registery changes listed above this post and now have an AZERTY layout but the "fn+space" combination is now broken.
anyone have an idea ?
Strange Behavior
When i did the changes in the registry mentioned above, all he keys were desactivated. I double checked if i had done anything wrong. I reverted back to the old keys. Now I am still stuck with a qwerty layout on an azerty kyb. The advanced config tool had no effect. I set it to french but nothing changed. I have the Dutty's Hybrid Rom[DualTouch v4].
Thanx a million for your input guys. You are the best.
Greetings from Paris
divine_engineer said:
When i did the changes in the registry mentioned above, all he keys were desactivated. I double checked if i had done anything wrong. I reverted back to the old keys. Now I am still stuck with a qwerty layout on an azerty kyb. The advanced config tool had no effect. I set it to french but nothing changed. I have the Dutty's Hybrid Rom[DualTouch v4].
Thanx a million for your input guys. You are the best.
Greetings from Paris
Click to expand...
Click to collapse
This one for the Kaiser
- HKLM\HARDWARE\DEVICEMAP\KEYBD
CurLang = 1036
+soft reset.
As said, you can customize the Shap's 2.1 XML to permit modifying this options (Shap's standard DON'T do the trick on kaizer!)
Axet said:
I have performed all the registery changes listed above this post and now have an AZERTY layout but the "fn+space" combination is now broken.
Click to expand...
Click to collapse
Anyone ?
Hi,
I recently upgrage my TyTN II (originally a Orange Swiss ROM) with the new 6.1 upgrade.
With the previous official WM 6.0 Rom, I had to tweak the registry to have my QWERTZ keyboard working with the following key :
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD], layout key to 0407
With this new 6.1 ROM, I can't find this key anymore and Kaiser Tweaks or Schaps advanced config can't change it either.
Anyone to change my keyboard to QWERTZ with WM 6.1 ? Thanks a lot that would be much appreciated !
I also have this problem and it bugs me quite a lot...
I now have the official 6.1 english update setuped, and I found no way to set the keyboard layout back to qwertz.
I tried to toy as suggested with HKCU\Keyboard layout\preload\ but it completely crashed the keyboard ;-/
The key seems to be here in 6.1:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
I modified CurLang to 407 in hexadecimal (or 1031 in decimal) and it's working perfectly!
hum :$
It doesn't works on my hardware touch pro keyboard event after 4-5 soft reset
Somebody can help me ?
I'm using the new energy rom (Aurora, WM 6.5).
Thx!
Mastersey said:
hum :$
It doesn't works on my hardware touch pro keyboard event after 4-5 soft reset
Somebody can help me ?
I'm using the new energy rom (Aurora, WM 6.5).
Thx!
Click to expand...
Click to collapse
You might want to ask some help in your ROM thread!
Aloha!
Looking through a lot of threads for quite some time but cannot find a hack to switch the hardware keyboard mapping from qwerty to azerty.
The WM 6.1 method doens't seem to work for WM6.5...any ideas?
Thanks a whole lot!!
You tried this?:
\HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYB\CurLang
changing this value ?
azerty is french so propably there should be 1036
k0l0r3k said:
You tried this?:
\HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYB\CurLang
changing this value ?
azerty is french so propably there should be 1036
Click to expand...
Click to collapse
Thanks, but that is the WM 6.1 method I think.
There is no such key in my "WM 6.5 by MEDKIT" rom installation.
If I create it and fill in the value still same qwerty mapping.
All help welcome!
you can still use jcespi2005's cabs for wm6.5.....
http://forum.xda-developers.com/showthread.php?t=345426
if you don't have your language, install azerty one:
http://rapidshare.com/files/70647295/XDA_JCEspi2005_French_Input_Kaiser.cab
and change settings to match your language
arnoo said:
you can still use jcespi2005's cabs for wm6.5.....
http://forum.xda-developers.com/showthread.php?t=345426
if you don't have your language, install azerty one:
http://rapidshare.com/files/70647295/XDA_JCEspi2005_French_Input_Kaiser.cab
and change settings to match your language
Click to expand...
Click to collapse
Yepp that works fine on 6.5 roms. I used it to switch Joshs 6.5 rom from qwerty to qwertz.
Weird! I tried both:
XDA_JCEspi2005_French_Input_Kaiser.cab and XDA_JCEspi2005_Dutch_Input_Kaiser.cab but my hardware keyboard mapping didn't change at all.
My ROM is MedKit's WM 6.5 rom...
This same method did work on my previous roms though (WM 6.1 and below).
What 6.5 ROM do you people (who succesfully switched hardware keyboard mapping) use?
Maybe I'm going to try another ROM or so.
Thanks a lot for the replies btw!
I used in on medkits and joshs.
First you have to change the 2 reg keys -> softreset -> install cab -> softreset
Z3rO` said:
I used in on medkits and joshs.
First you have to change the 2 reg keys -> softreset -> install cab -> softreset
Click to expand...
Click to collapse
The 2 reg keys? Wich ones?
I only know of the CurLang change but in the medkit rom I even had to add a Curlang variable if I wanted to change it.
And which of those 2 ROMs do you prefer? Haven't tried the one from Josh yet but maybe I should.
Vielen dank!
HKCU\MUI\CurLang
HKLM\HARDWARE\DEVICEMAP\KEYBD\CurLang
It seems to be important to enter decimal values. NOT hex values.
After changing those two keys, softresetting and installing the cab resulting in another softreset I get my qwertz keyboard layout.
And you should really try Joshs rom. Build 21193 is so muich faster than previous ones
Z3rO` said:
HKCU\MUI\CurLang
HKLM\HARDWARE\DEVICEMAP\KEYBD\CurLang
It seems to be important to enter decimal values. NOT hex values.
After changing those two keys, softresetting and installing the cab resulting in another softreset I get my qwertz keyboard layout.
And you should really try Joshs rom. Build 21193 is so muich faster than previous ones
Click to expand...
Click to collapse
Thanks a lot for the info!
Just tried Joshs 21193 and it is indeed very fast.
But since I noticed there's even an 21198 by Anryl I'm flashing again to check that rom's speed. Once I start installing my crap I won't feel like flashing another rom for a few weeks so better make sure to try to have the best rom now.
21198 also is quite fast so sticking to that one. Changed the to reg values which I could find in this rom as opposed to the medit rom I tried yesterday and changing them did fix my hardware keyboard to azerty.
Thanks again for the info and have a nice day!!
Hey!
I found a Way to use the Hardware Keyboard in foreign Language Roms.
My Problem was that I have a German Keyboard (QWERTZ) and in WWE 6.5 Roms some Keys are different.
To solve this Problem all you have to do is to set the following Reg Key:
HKCU\keyboard layout\MUI\CurLang
I set the Value to 1031(dez) or 407(hex)
After a Softreset the Hardware Keyboard works perfect.
http://forum.xda-developers.com/showthread.php?t=522038