Database Info

Autorun from the BigStorage

Hi All,
as many of you, I have converted my Extended_ROM to a bigger Storage folder. Unfortunately I still need most of the software packages that were included into the Extended_ROM. I was looking for an AUTORUN.EXE that could allow me to place my CABs into the \Storage folder and install them after a Hard-Reset. No need to say I didn't find anything that fully complied with my expectations. The only useful thing I found was an autorun.exe that executed from the 'Storage Card'. A quick modification with an Hex Editor led me to the solution. I thought it was time now for me to pay my dues with this forum that has helped me so many times in the past. So here is the file !
Instructions are dummy proof !
Compress all your CABs (Extended ROM and/or other software packages) into a ZIP file (not RAR!) and name it 'ExtendedROM.zip'
Create an Hidden/Read Only folder called 2577 on the root of \Storage.
Copy the ZIP and the Autorun.exe files into that folder.
Hard Reset and watch at you Magician installing all the Cabs for you.
Enjoy !
Silver Bullet

I have just tried your method and it works!
Thank you very much indeed.
I consider this to be the best companion to the BigStorage. I zipped 14 cab files into a 8.6M zip file. I would save this as backup in my storage card. Next time, after a ROM upgrade, I can simply copy these back to Storage to have a clean and quick installation of the essential files.

By the way, the old trick of skipping the auto installation still works (i.e. soft reset immediately before autorun starts).
Moderator: I would very much recommend to make this a sticky, please.

hi there,
After I read almost all BIGSTORAGE postings here. I feel confident about do it. So few days ago I prepared myself to upgrade my O2mini. When I press "power-on" button + "camera" button + "soft-reset" hole with stylus... my O2mini got hard-reset :evil:
What I did wrong? You guidance is much appreciated. Thanks.[/quote]

You must have missed to press the camera button, just do it again, you should get it into bootloader mode.

itplanet said:
You must have missed to press the camera button, just do it again, you should get it into bootloader mode.
Click to expand...
Click to collapse
Thanks itplanet. I will give it a try again.

Oh! One last thing i forgot to mention:
please ensure that the CABs you are ZIPping are not flagged as READ-ONLY.
Autorun.exe unzips the ExtendedROM.zip file into your PDA memory.
If the content has been stored with the Read only flag set, the cabs will not be deleted just after they've been installed, thus wasting your valuable memory.
Ciao!
Silver

SD image WM5 CHS version, not work for all device yet

the last post tells you the detail

THANX
buzz

Thanks for reply.
Hope for good news

Can't replace wince.nls
I have a Win Mobile Phone Edition 5, very first one in U.S.
I tried to load chinese so that I can read chinese. I copy over font file and am able to see Chinese in Word, providing that I select options.
However I got issues with IE, because I there is no option for me to change the encoding.
I learned that I need to change wince.nls file. And I downloaded your file. Now I got an issue "Access Denied" message when I try to override original wince.nls. Looks like it was in ROM.
Any idea?
Thanks

you should use another file explorer other than the system's one, and then you can overwrite it
the tool is in the attachment(it's in chinese language), it's a green software

The attribute is grayed out.
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.

on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz

ok, i've downloaded your chinese.rar to test-it ...
i've replaced the wince.nls with this procedure
in \windows\ , i've renamed wince.nls to wince5.nls
got an error message "Can't delete wince.nls" , but it's renamed
Copy the new wince.nls to \windows\
Copy fonts to \windows\fonts\
import reg file ... modified
soft-reset
...
Anything appears ...
i'm not able to choose chinese in regional settings
In the registry , after soft-resest , nls automaticly set to "0409"
if i set to 0804 and soft-reset , poof .... 0409
I think there is another problem

OK, I will wait.
One another thing I noticed: through ActiveSync, I can create a folder in windows, (well, as you expect). But I can't copy the wince.nls file to even the newly created folder, not just windows folder. On my PC, the message saying... no space or no permission, etc. I do have like 3-4mb left in main storage and install other program.
Just for your infomation.

it is easily possible to copy wince.nls to your \Windows folder. Just create a cab for it.
But it is not taken into system... That;s the problem here...
Will look at it further...
buzz

I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.

Do you mean that you can choose the Chinese region now?

Re: The attribute is grayed out.
zoneu said:
Thanks for your prompt response and the program.
maybe i did not use it right, some how the menu of the program is mess up. see the attached.
I have Resco Explorer 2005, which also show wince.nls is in rom. Every time I change the other attributes, it changes back when I re-open property page.
While I have a pocket PC 2003 Dell x3. The wince.nls is not rom file.
Can I override rom file?
It is about mid night here in U.S. I will check back first thing in the morning, just in case you do not get response from me right away.
Again, thanks for your help.
Click to expand...
Click to collapse
see the menu in the attached

buzz_lightyear said:
on wm2003 it was possible to "override" files in ROM.
Now it is not.
You have to wait until we'll be able to decompress the ROM and inject your wince.nls into ROM.
buzz
Click to expand...
Click to collapse
Waiting for your good news ...

only 1.60b could be chineselization
I had tried to replace wince.nls in WM2K5_160C_WWE in various ways mentioned in xda-dev forum. none of them could be finished this job.
so i had to refresh my rom to 1.60b, everything is OK now. I can override the wince.nls, import *.reg, set regional to PRChina and so on.

expecting a perfect WM2K5_160C supproting Simple Chinese.

mazinka said:
I'm success to copy it in my himalaya. I had tried several method, one of them is o.k. but not sure is this one or not.
1) copy the wince.nls to somewhere in your SD Card.
2) Boot your Himalaya into Safe Mode.
3) Then copy the wince.nls to your Himalaya's \windows\
4) Soft Reset.
Click to expand...
Click to collapse
How do u manage to boot ur Himalaya into Safe Mode? Pardon me of becoming a dumbo.

WM5 CHS version SD image
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16

Re: WM5 CHS version SD image
ljm2020 said:
Hi buzz:
I have got a SD image from a Himalaya which rom is CHS version, it's backup from a friend of mine. He got it from the seviece center. but when i use this image to flash my himalya, i replaced the SD head, write it to my SD card and flash...finished, hard reset, and I got an error like this:
"Device authentication failure. Please contact the product manufacture. For reference, please provide your device ID.
5083252100381951 38000050bf3f5173"
Then I found a way to convert the SD image to a .nbf file for the xda-developers site. converted and flashed using the PC through cable, but the same "Device authentication failure..." error occucred again.
And then, I asked my friend flash the SD image to his device which the image came from. succeeded
!
Any way to make the rom work for my device? help pls...
ljm2020
2005/11/16
Click to expand...
Click to collapse
hi ljm,
i already answered to you on buzzdev.net )
buzz

How to downgrade with official desktop updater!?

Hey,
I tried to pot my Treo back to WM6 from Vodafone with the original updater, but it keeps telling me that my device is not supported because of language issues (Right now there is WM6.1 working on it in english and I need to flash the German WM6). when I open the installer with WINRAR I can see a couple of *.nbh files (cheeimg.nbh and cheeimg_fw.nbh). Is it eventually possible to just take one of them and flash it? or do they anyway require to have a preinstalled stock ROM to update with them? And why are there so many other files in, when i usually actually just need one nbh file as a rom?
Thanks for helping me understand my phone

bump
i d like to know that aswell. did you fixed the issue by now?

If you want to use the official updater you need to modify the payloads.xml file.
You can find it by opening the official updater, but don't start the upgrade. Opening the updater will extract a bunch of files to your TEMP folder. The payloads.xml file will be in one of the subfolders. The folder is called something random so you'll have to seach for it, but you'll see a bunch of Palm icons in it so you'll know you're there.
You can edit the payloads.xml file with any text editor. Notepad works fine.
If you are changing carriers as part of the update, you will probably need to change the carrier code to the one matching the currently installed ROM. This is AT&T, for example.
Code:
<carrier_codes>CNG,ATT</carrier_codes>
I think Vodofone is VF, but you'll have to do some searching to confirm that.
Then you need to change the revision range to allow the downgrade.
Code:
<revision_range>
<low>1.13</low>
<high>3.00</high>
</revision_range>
Save it when you are done, and then start the updater. It should work. If not, there are plenty of posts here about downgrading ROM's, so search around until you find something that works for you.
And yes, you can extract the ROM's from a desktop updater and flash using the SD card method, assuming of course you have successfully HardSPL'd your phone. You need the CHEEIMG_FW.nbh file, but must rename it to CHEEIMG.nbh before putting it on the SD card.

You don't need to Hard-SPL in order to flash official Palm WM ROMs from a MiniSD.

[Q] Better guidelines for flashing vox

im a noob so theres no way ill manage to flash a vox phone by just reading wiki so help me out here pls.
1.i understand that i need to cid unlock my phone. but first of all i have to connect the activesync. activesync comes in varity or can i just download one from any site, do i need drivers for the phone?.
2.then i need an ApplicationUnlock.exe-file from a folder. OK so i run the exe file from my computer or do i send to the phone trough activesync and then run from there. do i have to put the folder with the exe file in the phone och the file is just enough. where in the phone should i put the folder or file.
3. what will the screen show so i know im doing the right thing here.
4. after that i should have a VOX_USPL folder with a spl_116_jockyw.bat file that i need to execute. so what do i do with this folder where do i put it, i mean should i execute it from my computer or phone?
5.so if i make to this point i should ok right? btw any reboots along the way i should be aware of? am i forgetting something more steps maybe?
6.so then i need a cooked rom right? like a folder with a bunch o files right? one of this files should be a flash.exe-file. so do i execute it from the folder in my computer while the phone is conected via activesync or do i put folder in somewhere in the phone and execute it from there. what do i do with the other files in the folder?
all this questions makes me confused about if i should or not. i just want to update the phone to 6.1 or higher, is there any official rom update that will go smoother?

The sequence of actions is a little different than you stated.
You need to application unlock the device as it is to allow subsequent actions to succeed.
You must temporarily (or permanently aka "Hard-SPL") put a bootloader on the device that ignores the CID lock. The device is NOT CID unlocked afterwards, but the "ignorant" SPL allows you to flash a cooked ROM nevertheless
Once the above is understood, reading the WIKI should give you the rest of procedures.

hi thanks so much for clearing that out, i think i kind of understand the purpose.
but as you see the wiki left me with so many specific questions regarding to all the necessery steps. if anyone can make or point me to a guide for dummies like me without skipping things that leaves me with questions like the above i would be most greatfull

[Q] Load Programs?

Ok, new to all this. I have a Sprint HTC Touch Pro 2 CDMA. I flashed to an Energy Rom, looks great. Now... How do I load other software... games and such? I have looked around here, thinking it would be part of the first post, I was wrong. Perhaps this site is too advanced for that? If so, point me to a newbee site and off I shall ride. Thanks in advance for your help. This phone is awesome, and the Energy rom I loaded, looks sweet.

Johnhcfllc said:
Ok, new to all this. I have a Sprint HTC Touch Pro 2 CDMA. I flashed to an Energy Rom, looks great. Now... How do I load other software... games and such? I have looked around here, thinking it would be part of the first post, I was wrong. Perhaps this site is too advanced for that? If so, point me to a newbee site and off I shall ride. Thanks in advance for your help. This phone is awesome, and the Energy rom I loaded, looks sweet.
Click to expand...
Click to collapse
well. there is the microsoft marketplace. or .cab files.
.cab file instructions...
one. download application's .cab file. suggested list of applications can be found here.
two. move the .cab onto your phone's storage card.
three. on your phone, navigate to the .cab file with file explorer, or other like program.
four. open .cab file.
five. choose installation location. device or storage card.
six. select install.
seven. enjoy.
and i havent ever used marketplace before...
i always find the .cab file.
sh4d0w86.

Not to make fun, but it is pretty surprising the you are able to unlock the phone and reflash the OS, but can't install software.
If you search this site, Microsoft Marketplace, or just do a Google for "Windows Mobile freeware", you'll find many thousands of apps. Find the app you want, copy or download the .CAB file to the TP2, and execute it.
For example, Google "Google Mobile Maps", download the Windows Mobile .CAB file, and run it.

Thanks
Well, the instructions to flash a phone are detailed and many. One problem I had was I was dropping the 7zip file onto the phone. Also, I could not unzip the file with the extension of 7z because I did not have the correct unzip manager. Another issue was I was trying to Sync the programs to the phone. Thanks for clearing it up. Is there a logical place to put them on the phone to make them run fast? Thanks in advance.

Johnhcfllc said:
Well, the instructions to flash a phone are detailed and many. One problem I had was I was dropping the 7zip file onto the phone. Also, I could not unzip the file with the extension of 7z because I did not have the correct unzip manager. Another issue was I was trying to Sync the programs to the phone. Thanks for clearing it up. Is there a logical place to put them on the phone to make them run fast? Thanks in advance.
Click to expand...
Click to collapse
Installing to main (internal) memory is much faster than installing to the SD (external) memory. Installing large programs to the SD card is the general rule of thumb for obvious reasons. It's up to you where you prefer to install them.
If you mean where should you put the actual *.cab files, then you could always delete them once they've been installed. You don't need them again unless you're going to flash constantly. It's always good to back them up, so storing them on your PC or the SD card would be preferable.

Thanks a bunch!

well, check out this thread..........
cabs just load on the phone and run like any program, just find the file and click it. exe's need to run from windows (regular computer) and install through activesync.
http://forum.xda-developers.com/showthread.php?t=550973

Excellent Thread!!!!!!!! I too made all those mistake and diddn't know how to load .cab files. This is my first foray into modding phones so this thread was quite informative.