Scrolling with the up/down buttons on the keypad can be made faster in settings. But what about the jog dial? Its set a little slow for my taste, are their any registry entries that control it? Any help would be appreciated! Thanks
sonus said:
Scrolling with the up/down buttons on the keypad can be made faster in settings. But what about the jog dial? Its set a little slow for my taste, are their any registry entries that control it? Any help would be appreciated! Thanks
Click to expand...
Click to collapse
How do you do that in settings?
I'll add voice to that - actually for me it's a bit fast, it does a whole screen on email for instance, whereas line-by-line would be MUCH better
Thanks
prattjo said:
How do you do that in settings?
Click to expand...
Click to collapse
Goto Start Menu>>Settings>>Buttons, then click on the "Up/Down Control" Tab. The device will feel a lot faster after speeding it up. I keep mine set a bit further than the fourth tick as the higher settings are probably only useful if you tend to scrolling through a lot of stuff.
I'll add voice to that - actually for me it's a bit fast, it does a whole screen on email for instance, whereas line-by-line would be MUCH better
Click to expand...
Click to collapse
Hmm, interesting, I didn't really even realise that for e-mails as I primarily scroll using TouchFlo inside of e-mails. My reasoning is that I want to use the Scroll Wheel in HTC Audio Manager like I would use it on an IPod, but currently, its set too slow for really efficient use.
Thanks for your help
No one knows about??? The scrolling speed using then D-Pad wheel is too low....... three-four laps to scroll just one row........ :-(
Sob Sob Sob
Try this registry tweak found by me yesterday.
Greate the key in HKCU\ControlPanel\keybd\ named JogWheelSensitivity type DWORD
Value 0 is max sensitivity. More value - min sensitivity.
hbc said:
Try this registry tweak found by me yesterday.
Greate the key in HKCU\ControlPanel\keybd\ named JogWheelSensitivity type DWORD
Value 0 is max sensitivity. More value - min sensitivity.
Click to expand...
Click to collapse
Thankx!!!! you are wonderfull!
JogWheelSensitivity
Hi,
I Did not find this value in HKCU\ControlPanel\keybd\ named JogWheelSensitivity
Should i add it to my touch cruise ?
Tnx
Tamir
ftamir said:
Hi,
I Did not find this value in HKCU\ControlPanel\keybd\ named JogWheelSensitivity
Should i add it to my touch cruise ?
Tnx
Tamir
Click to expand...
Click to collapse
yes... his post says create the key.
Thank you !!!
wounder man..!!! thanks very much..!!! I am searching the method for long time..!!!
Fan-Freakin-Tastic
Thanks a ton bro
Related
Hi,
I'm currently using your latest rom, and its great in terms of stability and overall features it contains. I had a small request which i thought i'd post, and decided to make a separate thread so that ppl can drop all their requests too, so here goes!
And now for my request -
It would be great if you could add PQz II into the default rom. Its a small app to enable control/alt key combos with a lot of other features for phone shortcuts, button shortcuts etc. Its freeware too! You can find it at www.nicque.com/pqz
if you could make the following customizations so that pqz starts this way by default, thats an added bonus -
1. Has the path to the "icon" bitmap (by default, its just a white blotch until you specify an icon in the default installation. the icon comes within the package though)
2. Set default keys to the SYM key for control and alt.
3. Make PQz start at windows bootup by default by adding a link in the registry
Cheers and I appreciate the great work!
San
PQZ
Hi,
I will see what it does and try today
Cheers,
Leo
Laurentius26 said:
Hi,
I will see what it does and try today
Cheers,
Leo
Click to expand...
Click to collapse
Nice.
I tried it already because sometimes I miss ctrl and alt.
Cheers
Hi,
Which keys do you set for ctrl and alt, cause they aren't on keyboard?
Fn + Tab maybe?
Also how to set a icon for the today I don't know?
Can the icon in upper tray moved to bottum tray?
2 many questions haha...
Cheers,
Leo
ultravox said:
Nice.
I tried it already because sometimes I miss ctrl and alt.
Cheers
Click to expand...
Click to collapse
Laurentius26 said:
Hi,
Which keys do you set for ctrl and alt, cause they aren't on keyboard?
Fn + Tab maybe?
Also how to set a icon for the today I don't know?
Can the icon in upper tray moved to bottum tray?
2 many questions haha...
Cheers,
Leo
Click to expand...
Click to collapse
He he, nice questions.
I tried the app but quited after some minutes because I couldn't find a way to get it working, lol
Nevertheless if working, it could be a good improvement.
Luis
with all do respect, PQz suck.
it really messes up the keyboard control for other programs, such as games for example...
if you really need it, install it. it only takes a couple of seconds and a couple of lousy KBs, if i remember correctly.
Rom devs can't include apps everytime users have a spacial request. That's what kitchens are for...
Laurentius26 said:
Hi,
Which keys do you set for ctrl and alt, cause they aren't on keyboard?
Fn + Tab maybe?
Also how to set a icon for the today I don't know?
Can the icon in upper tray moved to bottum tray?
2 many questions haha...
Cheers,
Leo
Click to expand...
Click to collapse
Normally, we set the "SYM" key for both Control & alt. This way, you press sym once, its control (shows on the icon, once set!), press it again it becomes alt. Its soooooo useful, i cant tell you.....you must try it!
i use it extensively, to do control+c, cntrl+v, blah!
The icon should be on top, so that it shows what you've pressed (control or alt).
The cooler part is the other sub-modules it has such as phone shortcuts, app shortcuts, system shortcuts etc. For example, i can set shortcuts such as alt+Alphabet for speed dials for all my contacts. No matter what application you're currently using, just hit Alt+S to dial a contact for instance, or even fire an application!
I also use, Alt+X to close current app, alt+0 to close all apps....really useful!
Try it out for a while, you cant live without it!
Cheers!
San
Can you add these files to Windows\ directory?
If you could add these to \Windows directory, it would be great! It changes the basic "Open/select file" dialog to browse through folders in a standard windows way rather than scanning through all folders and showing it as one single list!
It overrides this dialog at all places. For instance, when you try and add an attachment to your email, it shows standard folders for you to navigate and pick the right file, rather than making one giant list of all files on all folders!
San
EDIT: There's a small bug in wm6, the softkey labels are not shown though (not a big deal as long as you know what they are!) . The left softkey is "Up" one folder, and right softkey is for "Menu" when the open file dialog is active. Make sure you activate it under Settings->System->FileDialog and check the option in there!
shlomki said:
with all do respect, PQz suck.
it really messes up the keyboard control for other programs, such as games for example...
if you really need it, install it. it only takes a couple of seconds and a couple of lousy KBs, if i remember correctly.
Rom devs can't include apps everytime users have a spacial request. That's what kitchens are for...
Click to expand...
Click to collapse
thanks mr.arrogant. i feel much wiser now!
PQZ
Hi San,
I will have another look and tell you what I think of it later.
Greetings,
Leo
how about the ability to call the last dialled number? can that be added? and maybe not including the latest task manager 2.0 as that has problems with the closing of apps.... maybe the earlier version 1.5?
PQZ
Well... I tested a bit.
But it does screw up other functionings.
Also the today icon I don't like, I only see a white square in top bar
Did you try HandyMenu or AEButton, they have same function's but much easier. For copy\paste I use Pnotepad.
Sorry...
Regards,
Leo
rnzk8 said:
how about the ability to call the last dialled number? can that be added? and maybe not including the latest task manager 2.0 as that has problems with the closing of apps.... maybe the earlier version 1.5?
Click to expand...
Click to collapse
ooops sorry... asked to early.... hehe!
The WiFi problems are fixed now!
Can you pleeeease solve the Bluetooth Stereo problems ASAP.
I think I already flash my Universal with all existing ROMs, but I believe none as A2DP and WiFi WPA fully working.
can i suggest to try rlToday? It's a very nice Home/today plugin. Working with VGA and completely skinnable.
this tweak will reduce the amount of pressure it takes to use the cube gestures
1 open reg editing software
2 navigate to HKEY_LOCAL MACHINE\software\OEM\TFLOSettings
3. in HKEY_LOCAL MACHINE\software\OEM\TFLOSettings find DWORD fingerpressure...
4. enter in to edit mode then either double or quadruple your oem setting which is 3760
5. !!!!!!!!!*******DO NOT decrease the OEM value only increase IT WILL ACTUALLY TAKE MORE PRESSURE********!!!!!!!!
6. soft reset then enjoy reduced pressure gestures!!
...............................................................................................................
also figure out this could lessen normal wear and tear(scratching of protectors/PDA screens) since lesser pressure is applied to Tap the screen
here's what i did..
thru the PHM registry editor(or any PPC registry editor)
go to..
HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\TouchPanel
then find DWORD PressureThreshold'
Change the value of PressureThreshold.(INCREASE value ONLY!!!)
i tried doubling the default value. until i have reached my desired setting.
now,its like tapping soflty without having a feeling that i have screen protector. Also less stress on the stylus and screen and faster tapping.
WARNING: Only INCREASE THE VALUE BUT NEVER THE DECREASE THE DEFAULT VALUE.
Lowering the value of Pressure Threshold means you need to apply more pressure in tapping than you normally do.
wow!! tks for the info. i've change the settings by jz double up frm OEM setting. It works & i'm so enjoying wif very soft tapping on the screen now
there are more reg hacks im working on like im speeding up the movement of the cube and other things like speaker phone volume ill be posting all of them here i try them first and make sure they work before telling them to everyone
Hmm there was no folder called TouchPanel in my drivers folder
Seed123 said:
Hmm there was no folder called TouchPanel in my drivers folder
Click to expand...
Click to collapse
Same for me...
Instead of HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\TouchPanel
I searched the DWORD PressureTreshold and found it at HKEY_LOCAL_MACHINE\Drivers\TouchPanel
maybe there are different Versions and other Destinations of the Key TouchPanel.
Very nice tweak! I always thought I had to apply to much pressure to the screen even before I was using the screenprotector.
Thanks for this!
Edit: it is also much nicer to work with the PCM keyboard now! Typing goes smoother.
Holy ****, this is great! It's much easier now to write on the screen with a touchpad.
Thanxxxx main!!
So what you people use for the value under PressureTreshold for TouchPanel?
I doubled them both
Great Tweaks!!!!!
hey man these are great tweaks. I jus added these tweaks to the Touch Wiki, keep em' coming man
and yeah as some members suggested it is:
HKEY_LOCAL_MACHINE\Drivers\TouchPanel
can u verify this bereda, so as to reduce the posts which doubts the location of the registry key
I just will add this tweak also on my elf with Blue Touch 4.0 ROM and my value is already 9518. So Swiftblade ROM users dont have to add this tweak i guess
NP9660 said:
I just will add this tweak also on my elf with Blue Touch 4.0 ROM and my value is already 9518. So Swiftblade ROM users dont have to add this tweak i guess
Click to expand...
Click to collapse
Are you talking about HKEY_LOCAL MACHINE\software\OEM\TFLOSettings\fingerpressure or HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\TouchPanel\pressurethreshold. My first value was 3681 instead of 3761 and my second one was 9350. I just doubled them both.
tiftof said:
Are you talking about HKEY_LOCAL MACHINE\software\OEM\TFLOSettings\fingerpressure or HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\TouchPanel\pressurethreshold. My first value was 3681 instead of 3761 and my second one was 9350. I just doubled them both.
Click to expand...
Click to collapse
Im talking about HKEY_LOCAL_MACHINE\\Drivers\TouchPanel\ pressurethreshold
Like I said, I doubled that one anyway. There is nothing being said about a default value for that one in the first post. I think doubling that variable is why pressing keys on my PCM keyboard and the overall "touchscreen experience" is going better.
Its wierd.. I change the first one but the second tells me access denied.. even restarted the phone and tried connecting again.. I can change the first one.. but I can't change the one inside the TouchPanel directory..
Im using Mobile Registry Editor.. its pretty simple.. can't even search in it so I want to try something else.. Im going to search around for one but if someone wants to let me know what they prefer that would be awesome..
nevermind.. this article from the developer here helped me..
http://www.breaksoft.com/Blog/Posts/2005/8/Mobile_Registry_Editor_FAQ.aspx
mrtical said:
Instead of HKEY_LOCAL_MACHINE\SOFTWARE\Drivers\TouchPanel
I searched the DWORD PressureTreshold and found it at HKEY_LOCAL_MACHINE\Drivers\TouchPanel
maybe there are different Versions and other Destinations of the Key TouchPanel.
Click to expand...
Click to collapse
hey guys sorry for the delay the you are correct this is where the registery is located as listed above!!!!
my settings are actually quadrupled but its amazing im actually working on speeding up the cubes spins andhow fast it reacts!!!
my touchpanel threshold is at 38372
and my touchflo is at 15040
its great for me
For the TouchFlo, I found that it did have an effect.. however, I tried adjusting the PressureThreshold and didn't notice much difference...
Thanks for the tweak!
pmgpriebe said:
Its wierd.. I change the first one but the second tells me access denied.. even restarted the phone and tried connecting again.. I can change the first one.. but I can't change the one inside the TouchPanel directory..
Click to expand...
Click to collapse
Same here. "access denied".
Any way to go around this, to change the pressurethreshold value?
Does anyone have the original registry settings for the camera? I changed the max file size for the burst and sport modes and while it allowes 3M on these now, the phone can't handle it. Like a moron, I did not write down the default settings for:
MainCamCaptSize and
MainCamSupport
TIA,
-Space
*bump*
*bump*
You should provide the full key path.
Just use Diamond Tweak, it allows you to change it there with no problem at all.
http://montecristoff.webs.com/diamondtweak.htm
dr g said:
You should provide the full key path.
Click to expand...
Click to collapse
Sorry. The paths are:
HKLM\Software\HTC\Camera\P6\MainCamCaptSize
and
HKLM\Software\HTC\Camera\P6\MainCamSupport
Thanks!
-Space
mspace00 said:
Sorry. The paths are:
HKLM\Software\HTC\Camera\P6\MainCamCaptSize
and
HKLM\Software\HTC\Camera\P6\MainCamSupport
Thanks!
-Space
Click to expand...
Click to collapse
64 and 80, respectively
Thanks!
I like the VolumeOverlay cause it's prettier, it doesn't interupt your current task and u can set 15 steps instead of only 5. Here's an instruction how to enable it.
Easy way with registry:
In HKLM\Software\HTC\VolumeOverlay\3rdPartyAPClass\ create a key with any name and in there create a string value with the name: ClassName and the value is the name of the window class (I use BSB->rotation settings to find that out).
That works quite fine with the most application and especially for standby if u use the windows lockscreen u only have to set the value of the string value to ConfettiLockScreen and you dont have to reboot. (It only works if u play some kind of sound otherwise u dont see anything ).
In some applications it's more useful to have a tilted VolumeOverlay although the portrait version is quite nice and sufficient.
The harder way:
In HKLM\Software\HTC\VolumeOverlay\InhouseAPClass\ set a key with any name and a string value with the name: ClassName and the value is again the window class name. In addition u need to set in HKLM\Software\HTC\VolumeOverlay\InhouseEnable2ndUI\ a key with the name of the window class and and in there a string value with the name: Enable2ndOverlay with the value: 2.
Example: LockScreen/Standby
1. I look at the window class name with BSB->rotation->add application->shake in lockscreen. Result: ConfettiLockScreen
2. Create a key in HKLM\Software\HTC\VolumeOverlay\3rdPartyAPClass\ with the name Lockscreen (or any name)
3. In HKLM\Software\HTC\VolumeOverlay\3rdPartyAPClass\Lockscreen\ I create a string value: ClassName->ConfettiLockScreen
I hope I could help you and I hope it will be implemented in the BSB tweaks in the future. I would advise to combine all this settings (P2Z, rotation and VolumeOverlay) cause it's easier to add an application once and than tick what u want to have.
Hi there
This seems to be exactly what i need but fail at implementing it.
I am trying to enable this for CorePlayer.
The window clasname seems to be 'wCorePlayer'
I created HKLM\Software\HTC\VolumeOverlay\3rdPartyAPClass\CorePlayer\
In there i create a string value with the name (REG_SZ?) ClassName and the string value wCorePlayer
It's the first time I edit the registry. Am I doing something wrong?
Thanks
A
Okay it works now. With CorePlayer you have to go the 'hard way'.
Thanks!
A
ill add this when i have some free time
Works well here, tested it with the RemoteDesktop (Portrait+Landscape).
But is there an easier way to enable it for all programs?
It's a little bit annoying creating a key for every programm.
thx
Thanks a lot, it's really a great thing !!
i've already add this like you to the lockscreen and it works well
If there are a solution to add this to all applications, i'm in !!
Would be nice if this could be implemented into BSB?!
can someone show us a screenshot what is the pretty VolumeOverlay
vua777 said:
can someone show us a screenshot what is the pretty VolumeOverlay
Click to expand...
Click to collapse
Yes please.
omershahab said:
Yes please.
Click to expand...
Click to collapse
go to music tab, play a song, while the song is played, press your volume hardware button.
vua777 said:
can someone show us a screenshot what is the pretty VolumeOverlay
Click to expand...
Click to collapse
It seems that it's not so easy to make a screenshot of it, but as already mentioned u can see in the music tab while tapping the volume rocker.
makeveral said:
ill add this when i have some free time
Click to expand...
Click to collapse
Good man!
Is there a way to get this all the time in all applications, without adding them one by one in the registry?
VolumeOverlay is not showed properly
I don't know why but VolumeOverlay is not showed properly.... it's showed only a black line... don't appear nothing more when I click in Volume buttoms..
May be is because I have installed MaxManila??? or because I have installed a taskbar icons (Brians Taskbar_6.5)???
Any one more with same problem??? or some one know how to fix it???
thanks in advance.
Azazel8 said:
I don't know why but VolumeOverlay is not showed properly.... it's showed only a black line... don't appear nothing more when I click in Volume buttoms..
May be is because I have installed MaxManila??? or because I have installed a taskbar icons (Brians Taskbar_6.5)???
Any one more with same problem??? or some one know how to fix it???
thanks in advance.
Click to expand...
Click to collapse
I resolved uninstalling brians taskbar icons, they was not compatible with the manila version of 1.61 rom.
Removed the icons and the volume overlay come back to work.
Is there an easy way to change the steps for the volume? Maybe somewhere a value in the reg?
tomylee
Nice, thanks NetDwarf for the tip, I've used it for CorePlayer (in the hard way) and the lockscreen, and it's much better now!
Roupette said:
Nice, thanks NetDwarf for the tip, I've used it for CorePlayer (in the hard way) and the lockscreen, and it's much better now!
Click to expand...
Click to collapse
Dude can you post how what exactly you did with the registry re: CorePlayer? I'm not so sure how to do it even after reading first post. Thanks!
are there any custom color taskbars present that doesn't cripple the volume overlay?
Could some one make this option in a cab? For people not so geekish?
e.g. I need a little more sensitive fingermouse than the max. value and sensivity settings 4 directional pad.
Any registry tweaks or something?
TIA
As I've been guessing, nobody knows...
So, really any1?
Just last try to get this on 1. page, then I'm gonna give up...