Database Info

How to use Wizard as dial-up modem?

Is it possible?

I believe so, there are a few programs that will help you out. The 8125 ships with Cingular’s "wireless modem driver".

Would that be on the OEM CD? Also, how do you use it?

If you are using WM6 just start Internet Sharing ...and active sync will automaticaly configure your device as a modem (no driver neded)
If you are using WM5 start Modem Link and use attached files (contains instructions too)

...but will AOL recongnize it as a modem and allow me to connect (dial-up) using the cell phone line instead of my land line?

Maybe, but I doubt it. Your best performance senario would be to use the instructions posted above for establishing a connection to the internet then setting up AOL to use a TCP/IP (Network) connection instead of Dialup. It's been more than a coupl of versions since I've used AOL, but it should be somewhere in the connection settings.

sync up to active sync and then open programs on ur phone then modem link..pretty simple..

try to use Internet Sharing, Good Tool

ya WM5 uses DUN so you will need to activate modem link and have the drivers ready. then you have to create a proper DUN connection
WM6 is hella easy. just activate internet sharing and plug it in. It works as a PAN (like a network adapter) so all you have to do is open a browser after it's plugged in.
AOL will work for both. However it works different for each one. if you use WM5, there is an actual modem that AOL can select. It's called HTC USB modem. You can also setup AOL to use the existing TCP/IP connection. This is how you would do it if you are using WM as well.

seth66 said:
If you are using WM6 just start Internet Sharing ...and active sync will automaticaly configure your device as a modem (no driver neded)
If you are using WM5 start Modem Link and use attached files (contains instructions too)
Click to expand...
Click to collapse
I used the above drivers, with wm5 on my 8125 and I'm able to use my phone for Laptop internet access through a USB connection.
This works great.
Only problem is that now, after installing the drivers, when I plug in my device active sync does not communicate with the phone....
_---------------------------
Edit:
Nevermind (light-bulb pops into mind as he realizes how to turn "modem link-off" from 8125 menu...
Doufass

What about if I want to send a fax from either the phone or my computer? How can I dial to remote fax machine?
Thanks for help.

Faxing is so eighties!
Anything that can be faxed, can be scanned!
Anything you can do through a web browser, theoritically can be done, I have never done a search for fax software for WM5, it seems like technologies like the Wizard are on the opposite end of the spectrum from something like the telegraph or fax machine

clia said:
What about if I want to send a fax from either the phone or my computer? How can I dial to remote fax machine?
Thanks for help.
Click to expand...
Click to collapse
I have Cingular, and I was told that you have to have a data plan in order to use the phone as a FAX machine. In other words, it's cheaper to use a FAX service.

WeldingRod said:
Faxing is so eighties!
Anything that can be faxed, can be scanned!
Anything you can do through a web browser, theoritically can be done, I have never done a search for fax software for WM5, it seems like technologies like the Wizard are on the opposite end of the spectrum from something like the telegraph or fax machine
Click to expand...
Click to collapse
Well, I am not going to argue the evolution of technologies. In fact, fax is still a tool widely used in today's business - I am sure a fax number shows on everyone's business card.
Staying on topic, the point is whether we can utilize a wizard for a modem to modem dial.

LONG time reader, rare poster! I've been searching for my issue here, but just can't seam to find it.
I see a LOT of posts that WM6 needs no drivers to be used as a modem. Since I've flashed my 8125 to WM6 I have not been able to use it as a modem, BECAUSE it's looking for drivers. I have no internet connection at home (because of a ghetto apartment complex and REALLY old phone lines). I can active sync my phone with no problems, but when I activate Internet Sharing, my computer recognizes an 'unknown device' and doesn't find any native drivers. My goal for this evening is to uninstall the old modem setup that I had pre WM6, in case that is causing any issues. If this doesn't work, does anyone have other ideas? (FYI - running xp pro)

Internet shareing won't go to internet
I am using internet sharing but I still can't connect to internet. Any change or setup on browser? I am using firefox.

seth66 said:
If you are using WM6 just start Internet Sharing ...and active sync will automaticaly configure your device as a modem (no driver neded)
If you are using WM5 start Modem Link and use attached files (contains instructions too)
Click to expand...
Click to collapse
Is this also true for a DIAL-UP modem connection? I think this one only works for wifi/GPRS/UMTS etc.... connnections?

Internet Sharing. How to use it?

Hi to all.
In the new roms from WM 6. Have and application called "Internet sharing"
I want to use the USB cable (not bluetooth) to connect mi laptop to internet trought my universal 3G.
How i use it?
I activate the connection. Mark the USB and my 3G definition. Connect. It's connecto 3G. And in the laptop i cant navigate.
Can anybody help me?
Thanks.

You have to disable the USB connection in activesync on your PDA, as well on your laptop. Mine worked with WM05!

First, connect the PDA to the net by selecting usb connection and your default 3g connection, push connect and then connect the PDA to the laptop and it will be seen as some modem or something else.
You have to disable the USB connection in activesync on your PDA, as well on your laptop. Mine worked with WM05!

Thanks.
But dont wotk for me.
The laptop detect the connection sharing. But the laptop don't navigate on internet.
The Pda navigate Ok.

am having the same problems too. ive followed above posted instructions but no dice.
in my case, the connect button is grayed out.
think i may have to configure either VPN, or ADD MODEM CONNECTION or SETUP PROXY SERVER. either way i dont have any idea how.
ROM: black shadow 4
RADIO: 1.43

juanjillo said:
Thanks.
But dont wotk for me.
The laptop detect the connection sharing. But the laptop don't navigate on internet.
The Pda navigate Ok.
Click to expand...
Click to collapse
Have your browser on your PC set to Auto detect Proxy settings.

My IE 7.0 have the "automatically detect Settings"
Dont work.
Thanks

juanjillo said:
Hi to all.
In the new roms from WM 6. Have and application called "Internet sharing"
I want to use the USB cable (not bluetooth) to connect mi laptop to internet trought my universal 3G.
How i use it?
I activate the connection. Mark the USB and my 3G definition. Connect. It's connecto 3G. And in the laptop i cant navigate.
Can anybody help me?
Thanks.
Click to expand...
Click to collapse
Hi,
I can describe, how I am using this feature in Vista.
First I do prefer to use Bluetooth over USB. The reason: it is very often that I am in the room, were the GSM/3G signal is poor. Then I can place my Uni in the window or other place were the signal is much stronger, and connect with the Uni using Bluetooth. The transfer is more or less on the same level as on USB anyway.
Now, Internet sharing option is a new function in WM6, bit like internet sharing in desktop windows. Our PC is not using the Uni as a modem. It uses it as kind of gateway to internet, meaning it use different protocols then with modem connection.
So, after pairing my Uni with my PC in Bluetooth, I got another kind of network connection on my network connections list. It is marked as closed connection with red mark on Bluetooth icon on this list. Then I go to internet sharing in my Uni and select Bluetooth Pan option and then click “Connect”. It establishes its own connection to internet using setup, previously configured in my Uni.
Then, in my PC I go to Network connections list and just click “Bluetooth network connection” icon. This makes my PC to connect with my Uni via Bluetooth using network (TCP/IP) protocol and use it as normal internet gateway. If I click the icon once more, then I get window showing standard connection with bites transferred, buttons for options, disconnection and so on. It shows that the connection is with 1Gb/s, but this is only for connection with my Uni. The connection from Uni to Internet is , obviously much slower and depends of local conditions and 3G standard.
Hope I could help.
Edit:
If I try to do the same over USB, then there is a problem. After connecting USB cable, my PC automatically goes into AS mode and syncs with my Uni. Then If in internet sharing I select USB and click "Connect" the syncing stops, AS in Uni shuts down (this is OK), but my PC try to install a new driver for new device and it does not find it, so it can not recognize my Uni as a proper gateway to connect with over USB. If it would install a driver then on Network connections list a new connection should show up, probably named as "USB network connection".
That’s the other reason I do not use it this way.

Show second and third post. Expain how to quit USB in AS to use this feature.
I will try this trroght BT, but (for me) via Cable is better, the pda is charging all the time. Via Bluetooth the battery goes down quickly.

People need help. I flashed my cingular 8125 with crossbow reloaded rom, its great but cannot seem to understand how to use internet connection sharing to get my laptop online. under network connections i can see that my phone is connected to the internet. but my laptop refuses to browse any site. i have winxp.

raghav.kas said:
People need help. I flashed my cingular 8125 with crossbow reloaded rom, its great but cannot seem to understand how to use internet connection sharing to get my laptop online. under network connections i can see that my phone is connected to the internet. but my laptop refuses to browse any site. i have winxp.
Click to expand...
Click to collapse
Check your firewall. In this mode, you are loged to a new network with different IP than your IP from your home network, if any. Using internet sharing your computer gets IP from your PPC. In my case it is 192.168.0.xx and the gateway is 192.168.0.1. It means that if your firewall was set to accept your home network with different IP, then you have to set it to accept this new IP as well. Oherways you will not get any comunication through this chanell. Of cource, this suggestion is valid only if you have any other firewall then Windows Defender.

juanjillo said:
Show second and third post. Expain how to quit USB in AS to use this feature.
I will try this trroght BT, but (for me) via Cable is better, the pda is charging all the time. Via Bluetooth the battery goes down quickly.
Click to expand...
Click to collapse
I am using this in Vista. There is something named as Center for Windows Mobile Cervices. This is Vista version of AS. Here I do not need to quite USB and AS. Simply set Internet sharing option in your PPC for Bluetooth PAN and then click "Connect" in PPC. After that, click "Bluetooth Network Connection" in your Network Connections List in the PC. You will get the page with list of bluetooth access points. You should see your PPC device marked as the default device. Bellow you have "Connect" button. Click it and you are done.
By the way, the second and other posts describe the attempt to connect in the old way using modem connection. WM6 does not provide the modem support for PC connection. It means that officialy you can not use WM6 device as a modem like with WM5 or Symbian devices. However, HTC has released the modem driver for WinXP and Vista for new WM6 as an after market support. You can google for this on HTC pages. I never used this, cause this new way seems to me a lot easier. Also I never heard about anybody who succeeded with does drivers.

I use Windows Xp and the firewall is OFF

With the new WM6 rom of Ivan works for me
http://forum.xda-developers.com/showthread.php?t=305512

wakko said:
You have to disable the USB connection in activesync on your PDA, as well on your laptop. Mine worked with WM05!
Click to expand...
Click to collapse
Hi, just checking, my O2 WM5 rom don't come with the "Internet Sharing" program.
May I know how to get it?
My current rom version is 1.30.107

how to connect to Desktop ad-hoc?

Does anyone know how i can connect using my prophet to my desktop adhoc internet shaing?
Is there any specific setting?
I tried connect with my N93i to my desktop ad-hoc and it has no problem wif internet surfing.. but once i try on my prophet it fail to let me use the internet (at 1st the Wifi connect was connected, once i start to go to google page, it cut off automatically.. repeated many times still can't get it thru)
any pls help me..
thx in advance

are you trying to access your computers internet connection from your ppc or the other way around... i'm confused.
Ad-hoc means "for a specific purpose" you never really told us what purpose

i'm trying to access my desktop internet connection using ad hoc.. i set everythg on desktop, but jus can't connet to it using my prophet

You need to tell activesync (or wmdc) to allow your phone to access the internet connection on your desktop.

can't i jus skip the WMDC part and connect using wifi only to the ad-hoc?

Any app out there to get internet from your PC? Opposite of phone tethering?

Hello everyone. First let me explain that I have a capped data plan since I'm surrounded by wifi besides work.
Now here is my question. On my old tilt and tilt 2 which were windows based were capable of getting internet from simply plugging them into a PC via USB. The phone would then use internet from the computer itself.
I have a galasxy s (captivate) . Are there any apps to do such a feat?
Sent from my SAMSUNG-SGH-I897 using XDA App

I might have completely misunderstood what your saying, but could you not turn the wifi on from your phone and connect to them?

Wifi is not allowed at my work. Sorry should have said that.
Sent from my SAMSUNG-SGH-I897 using XDA App

SlimJ87D said:
Hello everyone. First let me explain that I have a capped data plan since I'm surrounded by wifi besides work.
Now here is my question. On my old tilt and tilt 2 which were windows based were capable of getting internet from simply plugging them into a PC via USB. The phone would then use internet from the computer itself.
I have a galasxy s (captivate) . Are there any apps to do such a feat?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
i hope you are using windows 7 on your laptop...if you are,then download 'connectify'...its easy to set up and will turn your laptop into a wifi hotspot so that you can use your laptops internet connection on your phone... cheers

Its possible
It is possible. But there is a but.
It is a standard feature of HTC sync.... To connect your device to your laptop and use its internet connection.
So....I guess someone have to extract that functionality and pack it into something that works on all devices...
I use it quite a lot.. And I have removed sense from my revolution rom with a script from desire forum.
Good luck

hey all!!
Even ill like to know abt it!
I have a cablenet connection at my house and no wifi !
So any way to connect my samsung galaxy 3 to to my pc via usb and use the cablenet on my mobile?
i searched for it on google and ended up in a forum which i dont remember exactly , but had given steps to connect my mobile to pc which included bridging my cablenet connection and mobiles connection and a long list of steps!!!
but as soon as i bridged those connections my cablenet gets disconnected and doesnt connect back!!!
so would like your help guys!!!
Gaurang

sounds like usb tethering?

I would also like a solution to this.

i did this @ my home..I have cablenet on desktop and CM7 on my mobile and used my xp desktop as the wifi hotspot and now I could connect my laptop and mobile to it ...not a prob at all

vijaykirann said:
i did this @ my home..I have cablenet on desktop and CM7 on my mobile and used my xp desktop as the wifi hotspot and now I could connect my laptop and mobile to it ...not a prob at all
Click to expand...
Click to collapse
Did you even bother to read the original post?
We all know we can use the desktop wifi to connect our mobiles.

[Q] active sync and internet connection setup.... pls help

boss, i am using following
1. device- htc hd2 , win mob6.5
rom- 1.66.415.9 wwe.
2. laptop- win xp with active sync 4.5.with a dsl connection.
i have been using the internet of my computer by active sync in my htc hd2. and everything was working very nicely. my hd2 have been connecting to laptop and the internet of laptop in a second and was very good. suddenly few days ago the htc weather stopped updating.
my data plan (sim) dont have any internet connection. i,some time use the wifi of my work place. from yesterday my phones few features got disrupted, like i can connect to active sync internet of my laptop and use-1.opera browser, 2.intenet explo. 3.google maps. 4.facebook for win mob. 5.spb tv 5.palringo.. without any problem
but i cant use 1.win. my phone, 2.marketplace 3.magic mobile currency converter 4.open market. when ever i try too connect them or start this applications, they replies could not establish a connection. check your internet connection.
i have been trying to fix it. i used all the methods i found in xda website, like active sync config, uninstall-install, active sync>file>connection>this com is connected to internrt. registry tweak to add d-word value allowLPS and all
on device i checked connection setup, kept my work connection in advanced setup, changed them did a lot of things. i updated the connection database of all operator also, but no result.
still all those application cant find any internet connection in my hd2, where as others are connecting nice and working well. i tried to uninstall and install those programmes in my device but no resolve
pls if you guys can help. i have been happy with this win mob, even people was telling lot of doubt about win mob, because i found out xda developer, which makes it worth to keep a win mob device in pocket.