Majority here seems using a Tilt , though plenty of us have a TyTn II with different keyboard layout and buttons.
(the fn -space/fn-wifi and fn-mydoc are placed differently)
The Tilt keyboard fix is not compliant in layout with the Tytn II and this fix is a must have for many using cooked ROM's from any great Chef here.
I am not geek enough to play around rebuilding the TILT keyboard fix to a Tytn II layout, so maybe someone here could do the community a favor?
Thanks upfront!
(And not not start bashing if I did missed the solution somewhere. )
ok.. so u understand that the keyboard layout is different on the tytn ii and the tilt.. WWE roms come with the tytn II layout.. so on tilt's the symbols would be messed up a bit, so the fix is needed to get the keyboards to the tilt layout.
Unless you flashed a AT&T rom, the keyboard should be natively layed out for your tytn II. IF you installed the titl keyboard fix then you have changed your layout to the tilt's...
If your having problems with your layout install schaps advanced config tool and you can easily change the layout to which ever one you desire.
i see from your sig that you are using alex's rom......didnt you see a tytn ii keyboard fix in alex's rom wiki?
I am using HTC TyTn II
Now I am using Dutty's WM6.1 rom
Fn + A should be "Tab" in my keyboard, but now it's _
Fn + S should be "_" , but now it's "
Is there any fix for this ?
You don't by any chance have the Arabic keyboard as seen here, do you? It's the only one on that page that has Fn + A = "Tab" and Fn + S = "_". Maybe you could try to change your keyboard layout to one of the Arabic layouts. Here are the instructions.
Audiocracy said:
It's the only one on that page that has Fn + A =
Click to expand...
Click to collapse
I have a Taiwan version that also has Fn + A = Tab
I use the TAB key so rarely that it's not a big issue for me.
XtreMe_G said:
i see from your sig that you are using alex's rom......didnt you see a tytn ii keyboard fix in alex's rom wiki?
Click to expand...
Click to collapse
No, and THAT is indeed the issue.... our chefs are either cooking Tilt or Tytn II Roms, though when you want to use a Tilt rom (as Alex V5.2) on a Tytn II, the keyboard settings become scrambled. vice-versa I guess also
So, a Tytn II keyboard fix, which can be used with a TILT ROM would be the solution for a lot of us.
Alex advised me to use the Tilt fix as there is no Tytn II keypboard fix made yet
I am putting 50 USD aside for the one who comes up with a TytnII keyboard fix cab.
starmada said:
I am using HTC TyTn II
Now I am using Dutty's WM6.1 rom
Fn + A should be "Tab" in my keyboard, but now it's _
Fn + S should be "_" , but now it's "
Is there any fix for this ?
Click to expand...
Click to collapse
If Dutty's 6.1 is made for a Tilt, you just wait for the same fix as some of us need
did you check the wiki they have a tilt fix and at tytn fix
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
sd73ta said:
did you check the wiki they have a tilt fix and at tytn fix
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Click to expand...
Click to collapse
I first thought that this was indeed the solution... though in vain..
EDIT: Tested the Tytn II keyboard fix for ATT roms as identified on the Wiki by sd73ta , though the keyboard settings are still wrongly linked. I do not see a difference between the TytnII and Tilt keyboard fix anyway?
So, good advice, but still not solved
ONE and ONLY solution = Reg setting change !
Thanks to a helpfull member, the solution is as follows:
To fix this problem I needed to change the registry value of HKLM>HARDWARE>DEVICEMAP>KEYBD>CWSLayout from 1 to 0
+ soft reset
As such, a TytnII correct keyboard mapping works with a Tilt based ROM !!!
Case closed
Advice to include this in the WIKI?
ceevee369 said:
Thanks to a helpfull member, the solution is as follows:
To fix this problem I needed to change the registry value of HKLM>HARDWARE>DEVICEMAP>KEYBD>CWSLayout from 1 to 0
+ soft reset
As such, a TytnII correct keyboard mapping works with a Tilt based ROM !!!
Case closed
Advice to include this in the WIKI?
Click to expand...
Click to collapse
Still having one problem: they layout works 99% fine. Just one big loss, the Fn+Space key combination doesn't toggle through different characters as it is supposed to do (i.e, from a to á,à,...) based on what is in the sym.0409.txt file in \Windows. Big issue for those of us who use accents.
There has to be a different layout for this one... Any ideas?
santiargy said:
Still having one problem: they layout works 99% fine. Just one big loss, the Fn+Space key combination doesn't toggle through different characters as it is supposed to do (i.e, from a to á,à,...) based on what is in the sym.0409.txt file in \Windows. Big issue for those of us who use accents.
There has to be a different layout for this one... Any ideas?
Click to expand...
Click to collapse
I have the same problem with a new Dutty Rom. Is there a solution for this problem in the meantime?
Special2k3
Special2k3 said:
I have the same problem with a new Dutty Rom. Is there a solution for this problem in the meantime?
Special2k3
Click to expand...
Click to collapse
try to look for a symbolpad cab and see if there are some registry stuff you need to put in.
also...this thread sounds like it should belong in the other forum.
Hello,
there is already a symbolpad in Duttys Rom. I also tried to install a symbolpad again but i had no luck. There are still no accents letter with Space + FN.
Special2k3
For those who still has the "FN + Space for accents" Problem, the solution can be found in http://forum.xda-developers.com/showthread.php?t=394857, post #9 (by Macsek).
This issue happens because XT9 is enabled, so, the only thing you have to do in order to get symbols back by pressing <FN> + <Space> is the following:
"
...
With XT9 Enabled I Had:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Ime File"="\windows\eT9Ime.dll"
"Layout Text"="eT9 IME"
With XT9 Disabled I Now Have:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Ime File"="\windows\compime.dll"
"Layout Text"="COMP IME"
*The last 3 digits of the registry key (ie 409) may vary depending on the language code used.
...".
Hi,
I recently upgrage my TyTN II (originally a Orange Swiss ROM) with the new 6.1 upgrade.
With the previous official WM 6.0 Rom, I had to tweak the registry to have my QWERTZ keyboard working with the following key :
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD], layout key to 0407
With this new 6.1 ROM, I can't find this key anymore and Kaiser Tweaks or Schaps advanced config can't change it either.
Anyone to change my keyboard to QWERTZ with WM 6.1 ? Thanks a lot that would be much appreciated !
I also have this problem and it bugs me quite a lot...
I now have the official 6.1 english update setuped, and I found no way to set the keyboard layout back to qwertz.
I tried to toy as suggested with HKCU\Keyboard layout\preload\ but it completely crashed the keyboard ;-/
The key seems to be here in 6.1:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
I modified CurLang to 407 in hexadecimal (or 1031 in decimal) and it's working perfectly!
hum :$
It doesn't works on my hardware touch pro keyboard event after 4-5 soft reset
Somebody can help me ?
I'm using the new energy rom (Aurora, WM 6.5).
Thx!
Mastersey said:
hum :$
It doesn't works on my hardware touch pro keyboard event after 4-5 soft reset
Somebody can help me ?
I'm using the new energy rom (Aurora, WM 6.5).
Thx!
Click to expand...
Click to collapse
You might want to ask some help in your ROM thread!
Hi
Iv looked everywhere for a simple cab to install the stock HTC Keyboard from the Touch HD2 to my Touch HD.
Can someone point me in the right direction? Iv searched around and i cant find a simple cab to port it to the Touch HD.
Would be very grateful!
Thanks
I think EzInput will work for you. It's not quite the HD2 keyboard but almost.
You might have more luck in the forum for your phone.
I have updated to 6.5, but my keyboard layout is wwe and i need Norwegian keyboard layout, if anybody could point me in the right direction, i would appreciate it. this relates to the slide out keyboard
ok, found various Norwegian keyboard files almost all were custom made and not fully mapped correctly.
But the good news is I found one that seems to map everything correctly on the slide out keyboard, its a small cab file just copy to your vox and then run on vox, job done.
I hope this is helpful to others as well.
http://www.mediafire.com/file/f70fqshsc9v0vvr/Norwegian.cab
Please note, this is only for the slide out keyboard, it does not effect your Windows Mobile display language, so will work on any language version installed
Issue solved...thread closed.