I am looking for a regisry tweak to navigate throught the HTC home using the scroll wheel. There is a ROM that has it but I am not using that one anymore.
same here... switch ROM?
I agree with you that using the scroll wheel you can navigate the whole HTC home with one hand. Certainly a matter of taste, but much nicer to me.
After swicthinc to Dutty 2, I noticed that on Dutty's ROMs this is not working,. It is working on Schap's and DCS, so I switched back to those. I suggested on Dutty's threads several times that it wa a problem, but was completely ignored....
let's find out how....
let's not give up....
It's called DPad Scroll Navigation. You can enable it using KaiserTweak on any ROM. Search for Kaisertweak, it's easy to find.
It's also enabled on my ROMs by default.
Hope this helps.
Not sure...
Hello Alex,
thanks for the tip, but I have Kaiser Tweak installed (version 10b5) and I find a D-Pad nav option for Pocket ie, nothing else.
I beleive the thread was about using the Track Wheel (not the D-Pad) for navigating HTC home. In DCS and Schap's I can use both at the same time. I am really not sure why any ROM cook would disable one of the options....
Dutty's ROM did disable the Track Wheel of HTC home (at least version 2 and 7, which I tested), and when I asked I was told that the D-Pad works.....
Juju
juju-35 said:
Hello,
I have Kaiser Tweak installed and I find a D-Pad nav option for Pocket ie, nothing else.
I beleive the thread was about using the Track Wheel (not the D-Pad) for naviugating HTC home. In DCS and Schap's I can use both at the same time. I am really not sure why any ROM cook would disable one of the options....
Dutty's ROM did diable the Track Wheel of rHTC home, and when I asked I was told that the D-Pad works.....
Juju
Click to expand...
Click to collapse
Have you tried it? Make sure to soft-reset after enabling.
Alex,
thanks again but I currently have DCS 1.5 and track wheel IS working with HTC home. I was just echoing the thread author that some ROMs have this problem, including Dutty.
I am interested in this since I like this functionality in case I flash a ROM in the future that has trackwheel disabled over HTC home (I still cannot figure out why anybody would remove the option though...)
I am surprised however that you say that 'Pocket Ie-> D-Pad Scroll Navigation' in Kaiser Tweak would have an effect on Track wheel navigation over HTC home???
This is the only item where I can find mention of D-Pad in the lsit of Kaiser Tweak options.
Juju
still not completed....
I agree, Kaiser Tweak does not do the work.... there must be a registry key to be changed to get this done..... let's hope somebody reveals it...
guys, any ideas on how to get this accomplished?....
I still have not got a solution to the issue.... can anybody help?
FYI, since this isn't about upgrading a ROM this question technically is in the wrong forum. Questions like this would be better suited in the general forum.
Just thought you should know for future reference.
It is related to which version of HTC home you are using. The v2_1_1005722 lets you use the jog dial and the one in most roms including Dutty's is version v2.0.814.722 which does not let you use the jog dial. So I use the light rom and install the HTC version I like and use jog dial.
Hope this helps.
Related
Hi, I just installed Faria's CB rom and am loving it.
If any1 has tried Magic Button and SmartsKey on WM6, could you please share your experience? Are all WM5 apps compatible with WM6? Thanks.
Blokade
Faria's rom has Smartskey built in. It is in Start, Office mobile, mydocuments, extras. It also has HTC X button installed no need for magic button. Just look in settings, system.
How come i dont have that Extras folder on mine? I have the latest Faria ROM also
That's because it is located in program files (as mentioned in the rom description by faria).
All the WM5 apps I've tried seem to work just fine on WM6 (makes sense since WM6 is really not much different than WM5. Its not like a huge OS version change).
Personally I run Magic Button over HTC X close. I like the features of Magic Button better (with showing running apps icons in the top bar, and ability to soft reset and more from the Home menu icon).
Enjoy!
magic button works for me v2.5.1, never used anything else.
frodiggs said:
magic button works for me v2.5.1, never used anything else.
Click to expand...
Click to collapse
2.5.1??? Mine is 2.0 build 51023. I've never seen anything newer than that. Do you have a CAB or something you can post with a newer version?
Works fine for me, but the colors are a little weird. WM6 seems to use different color gradients or something, so it sticks out like a sore thumb. I still love it though.
Magic button
I was addicted to magic button, but wisbar advance made it obsolite. take a look what works for u.
smartskey is working perfectly, couldn't live without. there is a .ini file with settings, look for the how-to.doc somewhere. (or open the .ini in a text editor). I love to have made that prog
Hello All!
I made this rom using the Kaiser Kitchen by jcespi2005 and jugglerlkr because I wanted the new radio with the HTC dialer from a Kaiser. This rom is based on RUU_Kaiser_CINGULAR_WWE so use 1.27.14.09 Radio.
As an added bonus, the little camera icon on the dialer that started voice calls on the original HTC rom acts like a talk button for those of us too lazy to hit the actually talk button. It does not however function as an end button. I can't fix this because I don't know how it's functioning as the talk button in the first place.
Do not use this ROM on the Kaiser if your going to use the front mounted camera for video calls. I have a Tilt so I removed all the Video Call png's from the rom.
154.45MB Storage Total
101.38MB Program Total
Out:
ATT Dialpad (buttons too small)
PTT (PTT button functions as Voice Speed Dial on press and Record when held down)
Adobe Reader LE
ArcSoftMMS with SMS/MMS together
Clear Storage
Camera (old version)
Esmeretec Java
IA_ZIP
Real Player
Sprite Backup
TTY Settings
Sliding Sound and TouchFlo Clicking
Windows Update
ATT Junk From Operator Package (most ATT branded junk)
In:
HTC Dialpad (big buttons from HTC_WWE, not touchdialer)
HTC CommManager (9 button from HTC_WWE, not duttty's 10 button)
.NET CF and SQL CE 3.5
ArcSoftMMS with SMS/MMS separated
Camera (new version, it's the 5.04 version that's in dutty's dual touch v2)
Samsung Time
Bluetooth Audio Fix from AT&T's 1.61.502.2
Reg Tweaks:
Disabled Fast Sleep
Disable SMS Sent notification
Removed Title Bar Clock
Turned off Date on Today Screen (turn on through Settings -> Personal -> Today)
Enable HSDPA Icon (only icon, HSPDA can be enabled through Settings -> Connections -> HSDPA)
v3.4 changes:
replaced 1.60 SYS folder with identical SYS from 1.61.
rom date changed from 1.60's 11/01/07 to 1.61's 12/26/07.
*honestly I see no difference from 1.60 to 1.61 except for the bluetooth audio fix and a bunch of AT&T bloatware that was removed in my first rom. there is no need to update to my v3.4 if you're using my v3.3 rom. if you really want to update and want the new rom date and D version during boot you can backup your settings from 3.3 and restore to 3.4 without any issues. the only reason I made this rom is because there was a request for it.*
1.27.14.09 Radio only by jcespi2005:
http://rapidshare.com/files/67452555..._CustomRUU.rar
Link to DKv3.3:
http://rapidshare.com/files/82582268/1.61.DKv3.3.rar.html
http://www.megaupload.com/?d=66NMJKZS
Link to DKv3.4:
http://rapidshare.com/files/82886744/1.61.DKv3.4.rar.html
http://www.megaupload.com/?d=90MR8RD6
I made a cab to put the HTC Sliding Sounds back in Settings -> Personal. It is made to become Applet11 in the registry since the last applet in my v3.3 and v3.4 rom is Applet10. Don't try to use this with other roms unless you are 100% sure that your Applet11 is not in use. Reboot phone after installing.
congrats
congrats on your rom. i hope its as good as all the other roms that have been popping up as of late.
Well... The "smart mobility" startup screen was different. Scared me at first because I heard the phone vibrate from restarting and looked over to see a black screen with white writing. My first thought was, "Oh crud. What did I do?" LOL.
It's a very nice ROM, and was basically what I've been looking for since I started flashing ROMs. I'd say it sits inbetween the ATT 0.4.4 ROM, and Kyphur's XDA-Live ROM. It gets rid of all the bloatware and nonsense, while not being completely stripped down of some useful options. The HTC Dialpad, and CommManager are much nicer than their AT&T counterparts. It is fairly quick. I will have to see what it's like after I install HTC Home and a few other apps.
Very nice work.
akadonny said:
Hello All!
I made this rom using the Kaiser Kitchen by jcespi2005 and jugglerlkr because I wanted the new radio with the HTC dialer from a Kaiser. This rom is based on RUU_Kaiser_CINGULAR_WWE so use 1.27.14.09 Radio. There is very little modification since I actually use a lot of the non-ATT programs on the ROM. No tweaks added. Keyboard is AT&T Tilt layout.
150.97MB Storage Total
101.38MB Program Total
..........
Click to expand...
Click to collapse
Are you serious about 101.38MB free Program memory?
sherpa said:
Are you serious about 101.38MB free Program memory?
Click to expand...
Click to collapse
that's total not free...
CUSTEL said:
that's total not free...
Click to expand...
Click to collapse
Ahhhhh...missed that part!
Tecknik said:
Well... The "smart mobility" startup screen was different. Scared me at first because I heard the phone vibrate from restarting and looked over to see a black screen with white writing. My first thought was, "Oh crud. What did I do?" LOL.
Click to expand...
Click to collapse
Sorry bout that. I don't like AT&T's Deathstar. It's just too bright and AT&T like so I used the splash from HTC's ROM.
wingman_214 said:
congrats on your rom. i hope its as good as all the other roms that have been popping up as of late.
Click to expand...
Click to collapse
Thanks! I'm not anywhere near the others (dutty, kyphur, custel...), but this rom fits my needs perfectly. Hope it works for you too.
Hello All. Just added a NetCF 3.5 version to the first post. Inspiration from Dutty, OEM from FAMAN.
Hi all,
I am a super newbi and just got a new at&t tilt. I want to get rid of the bloatware and install this ROM. This would be my first ever mod/rom installation. What are the steps (CID/unlock), how to install ROM. I tried to search here but too much information...can't comprehend. Is there a quick start guide somewhere? Please help. I dont want to brick my phone.
Look at the stickied thread here http://forum.xda-developers.com/showthread.php?t=334679 by pof. Pretty much all you have to do is download the attachment at the bottom of the first post, activesync your Tilt, run the exe and follow the on screen instructions.
Remember if you want to use my ROM to upgrade the radio also. Links to ROM and radio are in the first post of this thread.
Thanks for the ROM. Exactly what I wanted. I like the dialer and comm manager from HTC - leave out all the att fluff and give me back the PTT button. Great job.
The Phone pad
I have a brand new Tilt and have added some cabs and i can say i would be very happy if I can just find the HTC phone dialer. Can you point me in the right direction?
Thanks
anthonysa said:
I have a brand new Tilt and have added some cabs and i can say i would be very happy if I can just find the HTC phone dialer. Can you point me in the right direction?
Thanks
Click to expand...
Click to collapse
If you do a search for "touch dialer" or "kaiser dialer" you should be able to find a bunch. I'd rather not recommend any one dialer because I can't guarantee how well they will work on your phone. Hope that helps.
.Net fix in first post
If anyone is using my DK35 rom with .NetCF 3.5, please install the cab on the bottom of my first post to fix .Net issues. There are 6 files that are the incorrect version in the ROM. The cab file will replace these files with working versions.
Anyone using DK35v2 does not need to install this cab. Sorry for all the trouble.
sound?
awesome work, I love the fact that its very lite! but! im not getting any sound. nada. when i slide out the keyboard or play mp3s, i only get a clicking sound from the speaker. is this happening to anyone else? sound works fine when i use a different rom.
Edit: Works now! Thank you, akadonny!
Blar, check your radio version. You need to use 1.27.14.09. I have a link to it in the first post by jscepi2005. No need to flash the ROM again, just do the radio.
Will this rom cause problems if installed on a Kaiser rather than a tilt. I am looking for a 3.5 .NET rom but would prefer not to hose my kaiser in doing it.
Bratag, I only have a Tilt so I'm not able to test. I would guess that if the stock ATT rom works than this should also. I'm also not sure if the front camera on the Kaiser would work.
Hidden Proxy
Did you strip the enable/proxy settings?
Thanks,
Greg
Anyone tried, tested and recommend a better task switcher for the TC. One that doesn't require a 3 year old's tiny fingers to operate! Ideally I'm looking for one that can be used with normal man-sized fingers, a hard key and one that incorportates a key lock prog
Thanks
I use the app AltTab.exe
I have assigned it to the 'record' butten. Works really nice
Can you point me to the correct/latest version of this? It seems there are many variants and name-sakes floating around. Thanks
OK sorted. Got the zip from here: http://forum.xda-developers.com/showthread.php?t=357227&page=2
Makes you realise how slow the TC is. I think I had the same program on my P3600 Trinity (inbuilt in a cooked ROM) and don't remember it being so slow?
Hello all,
I'm recently returning to touch screen WM devices after having a 6.1 smartphone for a few months.
I can't live without finger scrolling so i must ask, which is the best add on for finger scrolling? I used to use ftouchflo, it was ok, but it wasn't kinetic. Then i upgraded to ftouchsl, but it was quite buggy.
Now I see the touch diamond and touch pro/fuze as well as the lg incite with nice, built in kinetic scrolling. Is there any way to port such an add on to the Tilt? (The phone i'm using) or are there any good alternatives?
Thanks!
does anyone have any input on this or is this sub forum just dead?
I've tried all different types of add ons and i'm really just looking for some users' opinions.
it's christmas lol wait and see what people say later on today
I don't think there's anything better to use than the FtouchSL...
use HTC Touchflo instead of ftouchflo, or ftouchsl,. it have so many option anyway,.
I beleive that if you install TF2D found on the development and hacking forum it will include HTC Touchflo, which works great as far as I am concerned.
htc touchflo is far more superior than ftouchflo or ftouchfloSL. I have tried both on my Polaris. The kinetic scrilling in HTC is very good.
You have a HTC Tilt yes? If so, is touch scrolling enabled? (Settings->System->TouchFlo, if that doesn't exist, I suggest you flash a cooked ROM, most of which contain TouchFlo built in).
-G- said:
use HTC Touchflo instead of ftouchflo, or ftouchsl,. it have so many option anyway,.
Click to expand...
Click to collapse
The only and big advantage ftouchflo/ftouchsl has over HTC touchflo is that it is cofigurable. while using the handwritten notes (I use PhatPad) the touch scrolling can be switched off while using ftouchSL/ftouchflo whereas it remains a pain in thw [email protected]# using it with HTC touchflo.
Thanks everyone. I had a hermes a couple months ago and when i put m2d on it, it didn't include touchflo for the whole system. Apparently it does now? I'll try an m2d rom on my tilt when it comes in a day or two and see what happens.
does anyone have a for sure working cab. I've searched and tried a few different ones w/ this new ROM i'm using (TAEL)...and all the cabs i've tried seem to fudge something up. for the most part, none of them have the numbers in the right spot Fn+any number gives me symbols instead of the numbers. So far i've tried one called 'HTC Fuze Keyboard fix' and 'TP2FUZE KB', and another called 'Shlomki Fuze Keyboard in TouchPro ROM'
EZinput 2 does not play nice with the Fuze keyboard lay out, his new rom corrects the issue along with many other bugs and from what TAEL says it should be out some time tomorrow.
Fraid i cant be 100% sure - but i think http://blownfuze.org has the cab (mines not a fuze so never bothered downloading the cab to check!)
well...i'm not running ez input...but i'm running finger keyboard 2.1. I never had any problems w/ my tilt using that app. Hopefully thats not it, i'm gonna try this cab one more time from blownfuze.
if i'm installing these cabs, it wouldn't matter if the keyboard was changed under the advanced config utility would it? Because regardless of whether it was on AT&T/Cingular/English/Custom...installing the cab would make the reg edit right?
you dont have to be using EzInput but its installed on the device and thats where the conflict is, The EzInput changes the key mapping for all hardwere keyboard keys.
dah wellz, i just switched back to nrg genesis rom. no biggie. thanx for the help anyways guys