Database Info

Need to get back to WWE!

I made quite the mistake yesterday. I have an MDA compact that came from T-Mobile Germany and originally had german as the default language. It was easy to change to english by going to regional settings & selecting english.
So I didn't think twice about using a German T-Mobile ROM upgrade - and now I'm stuck with GERMAN!!! Regional settings doesn't change the language any more! what the heck?
Sooooo, I need a WWE .exe ROM that will load - I tried a UK WWE and I was told by the installer that I had the wrong language and install could not continue. Is there a way to go back to WWE? I don't care at this point what version.....
Also, I have downloaded from the FTP server other ROM versions but they are all .nb1 files and, despite my best efforts, I can't understand the proper way to install these. I've looked thru lots of posts and found one set of instructions but they were very hard to understand. HELP!!

funkynugget,
I have been in your shoes, in the exact situation as a matter of fact. I am very familiar with PPC but had never flashed anything in my life( well there was this one time a few years back but uuhhhh.. thats for another story) Anyways just down load the preferred WWE, I am using the latest Jam rom which works great with my German Tmobile. You will also need to download the MaUpgradeUt.exe file as well. Do a google search to find that one by just typing in MaUpgradeUt.exe Now unzip or unrar (whatever) the rom that you choose to use so it breaks down the files seperately. In it you will see the MaUpgradeUt.exe file. Remove that one a replace it with the newly downloaded one. Click on the and enjoy. You may come up with langauge or country error. dont worry if that happens just restart, it will work the second time.
Todd

thank you sooo much for the advice. i will for sure give it a try. i've downloaded another version of the ROM from orange and i'll probably end up just using that BUT i would prefer to use the i-mate ROM, from what i hear it fixes all kinds of little bugs. only problem is it isn't available on the FTP server and i have no other access. do you have it? can you post it to the FTP server here on xda?
once again, thanks for the help!

i've done some research to find a downloadable 'maUpgradeUt.exe' file and i'm starting to wonder if it matters where i get it & what type. you suggest downloading one to replace the one that comes with the WWE ROM but how do i know i found the correct 'maUpdateUt.exe' language/file?

funkynugget,
I tried but it said I do not have permission to upload file. Do you have an FTP I could upload to, it would be my pleasure as I also have received help from this site and would be lost without it.
Todd

'maUpgradeUt.exe'
funkynugget,
I am trying to attach the 'maUpgradeUt.exe' file, Im not sure it will work and I hope its OK to do this, we will see.

Now unzip or unrar (whatever) the rom that you choose to use so it breaks down the files seperately. In it you will see the MaUpgradeUt.exe file. Remove that one a replace it with the newly downloaded one. Click on the and enjoy.....
todd (or anyone else who can help!) when i unzip the files they either come out as an .exe or an nb1 file, not a series of files. how do i get the files separated? and when you say 'click on the and enjoy' click on what?

Changing Default Keyboard Skin - WM6.1

Hi all,
I need some advice on doing something that was fairly easy to do in WM6.0 ROMs, which is changing the default keyboard skin by replacing the msim.96.dll.0409.mui file.
I've tried a number of WM6.1 ROMs and this does not work. The only way I have been able to get the .mui file working was to re-cook the ROM and using an OEM package. Even after I re-cook with a new keyboard skin and try to replace the .mui file it does not work. Very strange.
Any of the cooks out there have any ideas why this is? I did a reg. dump of a ROM with and without the keyboard OEM package but did not find anything specific that would show why this does not work.
Appreciate any feedback. I know this works without any issues in WM6.0 ROMs.
Thank you.

Don't know what your doing wrong buddy but most of the time you need to cook the new .mui file in like I always do and i have no issue with the WM6.1 roms ever using the grey keyboard that I always use in my roms. To get this straight your dumping the rom and then copying the new .mui file right over the old file if there is one at all then rebuilding the rom? that is the only way it will work you can't copy over it once you have rebuilt the rom it needs to be cooked in.

austinsnyc,
Thanks for the response.
If I cook the .mui file in a ROM it works fine. The problem is not being able to replace the file (even though the file is overwritten). I was able to do this in WM6.0 ROMs but it doesn't seem this is possible in WM6.1 ROMs and I just wanted to confirm it.
So if I dump, change file, re-cook, works fine. I guess I'll have to do that with any of the new WM6.1 ROMs I end up running.
Thanks again.

ecltech said:
Hi all,
I need some advice on doing something that was fairly easy to do in WM6.0 ROMs, which is changing the default keyboard skin by replacing the msim.96.dll.0409.mui file.
I've tried a number of WM6.1 ROMs and this does not work. The only way I have been able to get the .mui file working was to re-cook the ROM and using an OEM package. Even after I re-cook with a new keyboard skin and try to replace the .mui file it does not work. Very strange.
Any of the cooks out there have any ideas why this is? I did a reg. dump of a ROM with and without the keyboard OEM package but did not find anything specific that would show why this does not work.
Appreciate any feedback. I know this works without any issues in WM6.0 ROMs.
Thank you.
Click to expand...
Click to collapse
austinsnyc said:
Don't know what your doing wrong buddy but most of the time you need to cook the new .mui file in like I always do and i have no issue with the WM6.1 roms ever using the grey keyboard that I always use in my roms. To get this straight your dumping the rom and then copying the new .mui file right over the old file if there is one at all then rebuilding the rom? that is the only way it will work you can't copy over it once you have rebuilt the rom it needs to be cooked in.
Click to expand...
Click to collapse
Actually you can change it easily via cab install but you need to sign it first. You can try the attached cab, and here: http://forum.xda-developers.com/showpost.php?p=1610615&postcount=3 for other skin.

Try this. First import the attached Keyboard Cert registry file (use dotfred's task manager which does registry editing, or resco registry editor). Once you do that, you should be able to use the various keyboard cabs. I've attached one that has like 20 keyboard styles you can choose from (uses mortscript to do this). Choose the one you want, soft reset, and presto...

sakajati said:
Actually you can change it easily via cab install but you need to sign it first. You can try the attached cab, and here: http://forum.xda-developers.com/showpost.php?p=1610615&postcount=3 for other skin.
Click to expand...
Click to collapse
sakajati,
Works fine now. Thanks for the links.

mfrazz,
Thanks for the info also! Appreciate it.

Recover CAB from an NBH file

Hello everybody,
This is my first post, so sorry if I'm not meeting forum rules and/or standards (I'm doing my best)...
I have a Kaiser bought through my cellular provider, it came with a localized, horribly slow ROM (click start menu, count to 10, menu opens... etc...).
After studying the wiki and forums I flashed it with dutty's 29/04 awesome rom and after trying each and every radio available found the only one that actually worked on my device.
Finally I synced the device with my PC and found that all my contact names (in my native language) are unreadable on the Kaiser (because it lacks the language pack that was supplied with the original ROM).
I have found on a local forum the NBH file of my provider's ROM and I know the language pack CAB is on it, under the WINDOWS folder (and should recognize my device as eligible license-wise).
Can anyone explain how can I get it from the NBH file (I REALLY don't want to go through the whole flashing process again). I tried playing with NBHExtract but didn't really succeed.
Thanks,
Dan

maybe u need this.

Cool, it worked and I managed to get the language pack installed!
Thank you!!!

Extract pure OS from cooked ROM

Hi all,
Perhaps it is a newbie question so please bear with me.
I have an i-mate K-Jam flashed with TNT rom (build 20273). It works perfect and nice, however (frankly speaking) I don't like or want some of the APPs installed with this ROM, but I can't uninstall them.
I've searched this forum to find a way to extract the OS (OS only) from TNT rom so that I can flash my wizard and then install all the APPs I want, with no luck. Perhaps my search skills are a little poor...
So would someone please explain if it is possible or not? and if yes, how?
Thanks in advance.
Regards.

You cannot remove apps from a cooked rom. Search for Vanilla roms if you just want the base rom without any extras and then you can install you own apps.

well you can, but for that u'll have to dump the ROM first, remove the apps you dnt like and recook it

you can not dump the TNT roms. when you try, there are no RGU'S or DSM's.
You can dump my rom if you like, but you will get some missing files you will have to put back into the oem.
the missing files come from me not editing the rgu's when I cook.
try dumping Hornet5. for the most part you will get complete packages, but also some "missing files". just put them back into the oem/sys and recook.

Thanks for info. Saved me a lot of time.
I finally managed to cook my own rom. Everything works perfect except that:
1) I've used XIP, SYS and OEM files/folders of different builds. Am I going to have problem later?
2) "CommManager.exe" was missing. I've searched the files used in kitchen and the only thing I found is "commmanager.htm". Later I managed to download and install HTC CommManager but I can't assign in to its button (button 6). Is there any solution for that?
3) How may I extract the "splash screen" from one build, and upload it to my phone?
4) Bluetooth is not working. It says there is no bluetooth hardware on device. Also WLAN disconnects after a few seconds. How may I extract the drivers from original ROM and upload it?
I know the above questions are too much, but actually I'm so excited that my first attempt to cook a rom was successful (almost). I hope one of you experts be kind enough to help me solve the above issues and have a perfect phone.
Thanks in advance.

you will have some problems with the initflashfiles.dat in the oem, as well as the "oemtranslation.prvxml" or something which controls your icons for programs and control panel.
The best thing to do is use the same build OEM SYS & ROM folders.
If you dumped hornet 5, then your best bet ist to work with everything in it. I was working at this rom after Sleurhut for about a month or two.
mixing builds of those folders makes you start from scratch again fixing up your oem again.. and again.
as far as the missing files, try using the Xdump method; or use the searcher on your PC to find the missing files folder and the contents.

Dear S.V.I
Thank you so much for your ongoing support and help.
As I've mentioned before, I'm a total newbie trying to have a clean WM6.1 on Wizard. I've searched and read lots of tutorials here and there, but there are still lots of questions remained.
I tried to play with HyperCore (multi-device) today and I failed in the first step. I've extracted the "nk.nbf" from official i-mate KJam ROM using WinRAR. HyperCore is installed and I've a "C:\Core" folder as well as a "HyperCore" folder on my desktop.
The "DumpRom" is asking me to make sure the "nk.nbf" is in "HyperCore\Extract\Source" folder. Well it is there. Press Enter and the error message says: "There is no nk.nbf in Core\Extract\Source".
No it is not. First, it asked me to put it in "HyperCore\Extract\Source" not "Core\Extract\Source". Second, there is no "Extract" folder under "C:\Core". Even after creating Extract\Source under C:\Core and copying nk.nbf there, the same error message appears again.
So, what I'm missing here?

Same
I'm also scratching my head on this problem too. I've even tried creating extract\source folders in locations C:\core\ and desktop\hypercore\ but still no luck.
I'm wondering however that the issue could be caused by vista/7's change from Documents and Settings\user\desktop (2000, XP) to Users\user\desktop.
It may change the way the batch files are called but i'm really rusty on batch commands these days

I would start with the sticky "How to cook a ROM" thread, focusing on CRACING's kitchen, then move to Nekid Angel (Post #3)
where you will find a more updated ROM ready to cook. If you want to try WM6.5 a good ROM and kitchen is at [WM Kitchen] Wizard Kitchen or CRACING's RC6. I have been playing around with that.
You might move your discussion to one of the cooking or kitchen threads mentioned above, too, since that is where others will look.

Perfect
That's what i was looking for thanks for the heads up N2rjt!

µkitchen to add custom files into protected rom

Hello all ,
I ran into the problem of liking a rom that was protected..
no problem , only thing i want to add was remote tracker.
the rest i do with uc.
So with the help of da_g i striped a kitchen to unpack and repack protected roms.
to add a package , just unpack..put your cab in the dump dir and add it to config????.txt
and repack.
that way i get the use the protected rom with my own package build in.
thought i would post it.
grtx , arnold

hi arnoldl,
i want to thank you and everyone have helped you to create and publish this. i was searching something like this since many time ago, finally i found your thread and i was able to add RT to the rom i use!
i think this will be useful to many other people
i have changed something and it works perfectly with my blackstone!
thank you thank you.
bye

What is the difference in extracting ngh file, adding cab file to dump folder, updataing config.txt and recooking compared to installing the cab file using UC?
Can we add visual kitchen packages to this dump folder? If we can add do we need to just copy all the files in all the folders of the package to dump folder?
eg: in the package there are some files in 0409 and some in files folder , _skip, app.reg, all these goes to dump folder?
Thanks

@DarkRenegade
No problem , happy that i helped...
@kk0813
If i would buy a phone of the street , i would do the folowing.
- check if there are funny things on it
- format the card
- hardreset the phone
and gone is your remote tracker protection..
If i cook rt in, with my personal settings for it.
after a hard-reset it's installed again , so i can still gps find my stolen phone after a complete format.
only next step i want to take is to re-hard spl , to prevent reflashing if posible.
but these days with new 6.5 images coming out so quick i flash so often i will wait with that one
but all other things i install by uc or later shashimi
Don't know if you can add kitchen files.
never tried it.....
btw attached a new version.
remade it to work with the new envirus kitchen the newer 6.5 roms are using..

arnoldl said:
@DarkRenegade
No problem , happy that i helped...
@kk0813
If i would buy a phone of the street , i would do the folowing.
- check if there are funny things on it
- format the card
- hardreset the phone
and gone is your remote tracker protection..
If i cook rt in, with my personal settings for it.
after a hard-reset it's installed again , so i can still gps find my stolen phone after a complete format.
only next step i want to take is to re-hard spl , to prevent reflashing if http://forum.xda-developers.com/showthread.php?t=503112posible.
but these days with new 6.5 images coming out so quick i flash so often i will wait with that one
but all other things i install by uc or later shashimi
Don't know if you can add kitchen files.
never tried it.....
btw attached a new version.
remade it to work with the new envirus kitchen the newer 6.5 roms are using..
Click to expand...
Click to collapse
Thats a nice idea. Thanks for the updated version.

DarkRenegade said:
hi arnoldl,
i want to thank you and everyone have helped you to create and publish this. i was searching something like this since many time ago, finally i found your thread and i was able to add RT to the rom i use!
i think this will be useful to many other people
i have changed something and it works perfectly with my blackstone!
thank you thank you.
bye
Click to expand...
Click to collapse
Thanks again
works very well

arnoldl said:
Hello all ,
I ran into the problem of liking a rom that was protected..
no problem , only thing i want to add was remote tracker.
the rest i do with uc.
So with the help of da_g i striped a kitchen to unpack and repack protected roms.
to add a package , just unpack..put your cab in the dump dir and add it to config????.txt
and repack.
that way i get the use the protected rom with my own package build in.
thought i would post it.
grtx , arnold
Click to expand...
Click to collapse
You have a Trojan horse in first post!!!

All this to add a couple of cabs to a ROM ? Isn't it a whole of a lot easier to just... you know... install them after ? Or maybe even UC them to make it even lazier ?

Does this work with other roms from other devices? Or just Raphael roms?

I tried this but it extracts os.nb and os.nb.payload and also os.nb.extra but when it starts to create dump it fails
this is the log
ImgfsToDump 2.1rc2
Cannot map file imgfs.bin
what to do help

jagan2 said:
I tried this but it extracts os.nb and os.nb.payload and also os.nb.extra but when it starts to create dump it fails
this is the log
ImgfsToDump 2.1rc2
Cannot map file imgfs.bin
what to do help
Click to expand...
Click to collapse
Use the latest version of extractor, place the .nbh file in BaseROM, rename it to RUU_signed.nbh and run the extractor.
That worked for me.

A little late reading this, but I downloaded it to rip a rom from a little known site & guess what... Theres a trojan in that 1st post, virus software just riped it out of 2 kitchens recently downloaded as well as that 1st post file.
file namned Win32/Delfsnif.dx

I used your extractor but when i use old (1,2mb) i have problem with rom (sense 2.5 crash , windows menu crash), when i use new extractor (1,9mb) i don;t have a bootable rom (.nbh is very small 15mb-100mb) Is there any solution?
Sorry for my english I hope you can understand me.

I think there are more usefull tools that could help you.
Let's have a look here : http://forum.xda-developers.com/showthread.php?t=411915
And I believe that this tool is used by most roms makers.

Sorry but this tool is traying to rebuild protected rom into kitchen (with folders - ext, rom, sys etc.) but this is impossible.

Worked Great ! !
It worked great for me!

Moving to general section

You should just move this to the cooking forum. People are always asking if you can modify cooked roms. Then others are always answering that you can't dump and modify a protected rom, which clearly isn't true. So this would work ok in the Cooking forum (can't even remember the name of the forum, even though I'm a mod there, lol).

If this works, than this is pretty kick ass! I was recently trying to simplify the process as you did but your work looks flawless to me! I'll post as soon as I can confirm it works putting the rom back on an HTC rose (htc s743).

After the rom is dumped, what says what files go in what directories? In the dump directory ALL files are in the dump directory and not in the folder structure they would be after the ROM is flashed to the phone. Where would I find what determines the folder structure?