I made quite the mistake yesterday. I have an MDA compact that came from T-Mobile Germany and originally had german as the default language. It was easy to change to english by going to regional settings & selecting english.
So I didn't think twice about using a German T-Mobile ROM upgrade - and now I'm stuck with GERMAN!!! Regional settings doesn't change the language any more! what the heck?
Sooooo, I need a WWE .exe ROM that will load - I tried a UK WWE and I was told by the installer that I had the wrong language and install could not continue. Is there a way to go back to WWE? I don't care at this point what version.....
Also, I have downloaded from the FTP server other ROM versions but they are all .nb1 files and, despite my best efforts, I can't understand the proper way to install these. I've looked thru lots of posts and found one set of instructions but they were very hard to understand. HELP!!
funkynugget,
I have been in your shoes, in the exact situation as a matter of fact. I am very familiar with PPC but had never flashed anything in my life( well there was this one time a few years back but uuhhhh.. thats for another story) Anyways just down load the preferred WWE, I am using the latest Jam rom which works great with my German Tmobile. You will also need to download the MaUpgradeUt.exe file as well. Do a google search to find that one by just typing in MaUpgradeUt.exe Now unzip or unrar (whatever) the rom that you choose to use so it breaks down the files seperately. In it you will see the MaUpgradeUt.exe file. Remove that one a replace it with the newly downloaded one. Click on the and enjoy. You may come up with langauge or country error. dont worry if that happens just restart, it will work the second time.
Todd
thank you sooo much for the advice. i will for sure give it a try. i've downloaded another version of the ROM from orange and i'll probably end up just using that BUT i would prefer to use the i-mate ROM, from what i hear it fixes all kinds of little bugs. only problem is it isn't available on the FTP server and i have no other access. do you have it? can you post it to the FTP server here on xda?
once again, thanks for the help!
i've done some research to find a downloadable 'maUpgradeUt.exe' file and i'm starting to wonder if it matters where i get it & what type. you suggest downloading one to replace the one that comes with the WWE ROM but how do i know i found the correct 'maUpdateUt.exe' language/file?
funkynugget,
I tried but it said I do not have permission to upload file. Do you have an FTP I could upload to, it would be my pleasure as I also have received help from this site and would be lost without it.
Todd
'maUpgradeUt.exe'
funkynugget,
I am trying to attach the 'maUpgradeUt.exe' file, Im not sure it will work and I hope its OK to do this, we will see.
Now unzip or unrar (whatever) the rom that you choose to use so it breaks down the files seperately. In it you will see the MaUpgradeUt.exe file. Remove that one a replace it with the newly downloaded one. Click on the and enjoy.....
todd (or anyone else who can help!) when i unzip the files they either come out as an .exe or an nb1 file, not a series of files. how do i get the files separated? and when you say 'click on the and enjoy' click on what?
Related
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Yes
Read through this thread - there is a bit in the middle that discusses this
http://forum.xda-developers.com/showthread.php?t=300356
animelover said:
Is it possible to change the image which I can se when the device is booting up? I use smart1 WM6 v2!
Click to expand...
Click to collapse
See also on xda ftp
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
What boot screen are you looking for? Or do you want to creat your own one?
Yes, I want to use my own! It's an Anime picture like my nickname!
welcom screen
ady_uaic said:
here are some logos
you just have to run on pc with the usb cable plugged in, and then a soft reset, and everything will be ok...
Click to expand...
Click to collapse
well i had read the forum instructions and for change boot and welcom screen.
but something is wrong with the typho5. its suppose to extract nb 9200000 files but the application starts without extracting nobthing.
i would like to change the welcome screen from the PDAMobiz to some thing personal. i follow instruction but they dont fit the results i get.
any idea?
thanks to all
specially to the guys in PDAMobiz, who made the best of the best Rom
I want too to make a personal bootscreen...if someone can help us with a little tutorial, we are waiting..thx
Try this
The pdf manual in this thread has a section on updating boot screen and all the tools required to do it are included too.
I do not suggest everybody trys to get into the ROM cooking that is also described, but the splash screen section is fairly straitforward
http://forum.xda-developers.com/showthread.php?t=297027
first, with this tool you can create your own ROM (customized)...and also splash screens...see the manual pdf
welcomehead.96.png
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
xmanmaster said:
well to make it easy to understand where we stand this is the only file we must change. but there is a problem. the original file is read only and can not be replaced nor rename or moved. not with total comander , not even unlock extended rom. after a small research i found that the file is integrated with in the original ROM not the extended.
so i am looking for a tool to delete/install files into the ROM when present on the device.
it sims that that cannot be done. we must dump the present rom, sort of cook it on our PC than re- install it with changes done.
at the same time since most of us are very happy with the ROM as is , but want to personal it littel bit, its worth a dedicated tool.
i will look into it. if i find a way i will post it here.
thanks for the great job of the PDAMobize last version .
good tool and very stable
Click to expand...
Click to collapse
flykthewiz said:
You do not need to look into it!!!!
Read the previous two posts and look at the pdf manual in the download - it describes the tools you need to change you images (without cooking a complete rom)
And it doesnt need a hard reset either!
Click to expand...
Click to collapse
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Worked for me
You do need to use a prophet nvid ruu program though
ady_uaic said:
exactly, but i don't think that it will work on qtek s200, because now i saw that is only for wizard...if you made it, let me know...
Click to expand...
Click to collapse
can you please tell me what exactly should I do?
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
GAMBIT999 said:
Maybe this "How-To" guide can help you all out...
Either at Megaupload or Attachment
Click to expand...
Click to collapse
so everything that you've said there, in that txt file, is for qtek s200, isn't it? now i'm going to try
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
ady_uaic said:
in that arhive from you does not have RUU_SPLASH.zip that we need (from that tutorial)
i've copied that file, nk.nbf in the RUU_SPLASH folder and then i've executed ROMUpdateUtility_Wizard_NoID.exe and is not working...it tell's me EROR (300): INVALID UPDATE TOOL
This update utility cannot be used for you PDA Phone. Please get newer update utility.
Click to expand...
Click to collapse
If you have created your nk.nbf file, you can replace the one in this file (rename it to zip)
rename it back to exe and execute, it worked on my prophetG4 with WM6 on it
Hi all
i'm a new rom cooker and i've built my first rom n successfuly flashed it and its all good! One thing i can't find is the Network Setup thing
for example on Duttys Roms when you first boot it asks you to auto setup your Network Provider (Eg Orange UK)
where can i find a cab for this?
also the PACKAGE to use to cook into my rom?
yes i have tried searching but not exactly sure what its called, searching Network Setup doesnt bring anything good up ..
Thanks
Did you try this? Not sure if that is it or not.
ah Dutty made it duuuhhh!! Thats the one many thanks i'll build it myself into a package thanks
Looks like the password for provision.zip is no longer '1234'. Searching and googling didn't locate the new password, does anyone have it?
Connection setup (a.k.a. Network Wizard) is included within my OEM Packages, which can be found in my cooking kit threads.
dang said:
Looks like the password for provision.zip is no longer '1234'. Searching and googling didn't locate the new password, does anyone have it?
Click to expand...
Click to collapse
Found it:
030D681B-1DFC-4bd0-A72A-A9B3CCCDA653
I am able to unzip the new provision.zip with 030D681B-1DFC-4bd0-A72A-A9B3CCCDA653.
I am able to unzip the provision.zip, then the prov.zip and then the individual setting zip files using this PW. But strange thing that is happenning is that when I zip the files again the size of the final provision.zip reduces by about 150KB. And when packed in the Kitchen the utility does not work. where am I going wrong?
Can you kindly guide me?
Actually I was compelled to edit the provision.zip because the settings in it were wrong corresponding to my service provider. So I needed to modify those settings..
c_shekhar said:
I am able to unzip the new provision.zip with 030D681B-1DFC-4bd0-A72A-A9B3CCCDA653.
I am able to unzip the provision.zip, then the prov.zip and then the individual setting zip files using this PW. But strange thing that is happenning is that when I zip the files again the size of the final provision.zip reduces by about 150KB. And when packed in the Kitchen the utility does not work. where am I going wrong?
Can you kindly guide me?
Actually I was compelled to edit the provision.zip because the settings in it were wrong corresponding to my service provider. So I needed to modify those settings..
Click to expand...
Click to collapse
Same problem ...
The problem is how to compress, still looking for something similar to a compression, when replacing manually provision.zip this works ... I do not know why? Someone has some solution?
(Sorry my Google translator)
So i would do my research and properly learn how to extract all the files out of the rom but i'm on a time limit and have to ask!
I'm sending my AT&T Tilt to my dad in saudi arabia noon tomorrow. (the tytn II is $850 over there and the tilt is $400, same thing just no front camera) so he needs arabic on it and i'm loading the HTC arabic rom on it now and sure its gonna run like crap. SO i want to cook arabic onto sleuths 6.1 rom.
I got the kaiser kitchen, put the .nbh into base rom, ran !begin.exe and it extracted the rom for me.
I went through the files, i found ARA_IN4_Arabic.cab and ARASIPSetting.exe
I installed the cab and seems to put arabic on the device but the SIP isn't working, i tried to ruch the ARASIPSetting.exe on the device but nothing would happen, i put it in the windows folder but still can't use the arabic SIP or edit its options in the Input settings... any help would be great... as i said i'm trying to figure this out tonight hence i ask for help rather then read all the rom cooking and dumping readmes (although i've already read a couple, i still can't figure out how to trace which files are needed)
Thanks in advance.. heres to hoping. x
fone_fanatic said:
So i would do my research and properly learn how to extract all the files out of the rom but i'm on a time limit and have to ask!
I'm sending my AT&T Tilt to my dad in saudi arabia noon tomorrow. (the tytn II is $850 over there and the tilt is $400, same thing just no front camera) so he needs arabic on it and i'm loading the HTC arabic rom on it now and sure its gonna run like crap. SO i want to cook arabic onto sleuths 6.1 rom.
I got the kaiser kitchen, put the .nbh into base rom, ran !begin.exe and it extracted the rom for me.
I went through the files, i found ARA_IN4_Arabic.cab and ARASIPSetting.exe
I installed the cab and seems to put arabic on the device but the SIP isn't working, i tried to ruch the ARASIPSetting.exe on the device but nothing would happen, i put it in the windows folder but still can't use the arabic SIP or edit its options in the Input settings... any help would be great... as i said i'm trying to figure this out tonight hence i ask for help rather then read all the rom cooking and dumping readmes (although i've already read a couple, i still can't figure out how to trace which files are needed)
Thanks in advance.. heres to hoping. x
Click to expand...
Click to collapse
The best thing to do is flash with 1.2Sleuth ROM. It is a 1.60 ROM and works great. use also 1.27.12.17 Radio. After unzipping the attached In4Mobility Package, copy the exe file onto your SD card, and open from there. Install all three files on your DEVICE MEMORY... NOT THE SD CARD. After that do a soft reset. Go to In4mobility in the settings folder and enable Arabic. Then enable Arabic Language and enter location.. etc..in the other in4mobility folders in the 'Programs".
Good Luck.
Sorry I am not able to load the In4Mobility File. PM me your email address and I can email it to you.
Hello everybody,
This is my first post, so sorry if I'm not meeting forum rules and/or standards (I'm doing my best)...
I have a Kaiser bought through my cellular provider, it came with a localized, horribly slow ROM (click start menu, count to 10, menu opens... etc...).
After studying the wiki and forums I flashed it with dutty's 29/04 awesome rom and after trying each and every radio available found the only one that actually worked on my device.
Finally I synced the device with my PC and found that all my contact names (in my native language) are unreadable on the Kaiser (because it lacks the language pack that was supplied with the original ROM).
I have found on a local forum the NBH file of my provider's ROM and I know the language pack CAB is on it, under the WINDOWS folder (and should recognize my device as eligible license-wise).
Can anyone explain how can I get it from the NBH file (I REALLY don't want to go through the whole flashing process again). I tried playing with NBHExtract but didn't really succeed.
Thanks,
Dan
maybe u need this.
Cool, it worked and I managed to get the language pack installed!
Thank you!!!
Hi there,
I looked over to the "sticky" thread but apprently the links won't work anymore, thanks to all so helpfull palm support (from November 1st).
Could anyone share a generic wm6 rom on rapidshare or mediafire, or link me to a download page if I have overlooked something.
Treo750_2_23_ROW_EN_DesktopUpdater.zip would be highly appreciated.
Thank you very much.
I too would like this
well im doing some googling and find this:
Part 1:
http://cid-ef9806ee2eeba479.skydrive.live.com/self.aspx/Public/TreoWM/Treo750% 7C_2% 7C_23% 7C_ROW% 7C_EN% 7C_DesktopUpdater.part1.rar
Part 2:
http://cid-ef9806ee2eeba479.skydrive.live.com/self.aspx/Public/TreoWM/Treo750% 7C_2% 7C_23% 7C_ROW% 7C_EN% 7C_DesktopUpdater.part2.rar
the files consist of 2 part. the 1st part is around 48MB and the 2nd part is around 14MB, but after i extract it, both files contain the same files and at the same size, which is Treo750_2_23_ROW_EN_DesktopUpdater in both .rar files. thts really make me confuse
any1 know how & why?
Do you know what the password is for those two files?
can somebody upload Treo750_2_18_xxx_DesktopUpdater.zip file?
xxx: is code for Vodafone UK (that I don't Know).
I got my treo 750v one week ago from Palm after several monhs in their reparation center and it come back wih WM5 and now WM6 is not available in any official site.
Searching on web I got upgrade but for Spanish version.
Many thanks.
treo750_2_23_row_en_desktopupdater.zip
....................................................................
Wrong file?
Reaper. Thanks for the file but once again when I try to install got message about language. I'm really desperate because I want to upgrade mi Treo 750V (unlock) however I can't get proper files confused:. Really I don't know which one it is right)
reapeer said:
Here is the link... http://rapidshare.com/files/178769171/treo750_2_23_row_en_desktopupdater.zip
Click to expand...
Click to collapse
the updater.exe file is dated 16/10/07 is this recent enough to be WM6.1?
Manually done
Reaper I decompress the file using winrar and after taht I upgraded via SD Card and is working perfectly. tks
Thanks Reeper, ive been looking for that file for awhile. kudos sir.
Any chance of getting this file uploaded again? Tried the supplied link but Rapidshare indicates the file has been removed.
Me too. The file has been removed.
Can anyone upload the file again? I also want the same thing.
Here is AT&T's official download
http://mytreo.net/downloads/treo-750-updater-for-att-official,1189.html#
It works.
yangdq said:
http://mytreo.net/downloads/treo-750-updater-for-att-official,1189.html#
It works.
Click to expand...
Click to collapse
Thanks for the link, but I'd prefer the generic one if possible as I'm on the Telstra network in Australia.
HTC direct download link for Treo750_2_23_ROW_EN_DesktopUpdater.zip
I found this on a page in some Asian Language, but I downloaded it, unpacked it, and used an SD card to install it and it works great! It is a very slow download however!
http://www.gghtc.com/Pages/Download.aspx?ResourceId=ca63949c-ebcc-45ef-a276-ebb9c8df5be8
-DIIS
Can I get this? Or the Telstra one?
The AT&T one doesn't install for me...
kiwiandy said:
the updater.exe file is dated 16/10/07 is this recent enough to be WM6.1?
Click to expand...
Click to collapse
There has never been an official WM6.1 update for the Treo 750, so the short answer is no. That file will get you WM6.0.
xicarius said:
Can I get this? Or the Telstra one?
The AT&T one doesn't install for me...
Click to expand...
Click to collapse
How does it not install for you??? Did you try the SDversion instead of the Desktop version?
Any updates on this file? Can't seem to find it anywhere is Palm actively eliminating this from the internet?
firdaus_amer said:
well im doing some googling and find this:
Part 1:
http://cid-ef9806ee2eeba479.skydrive.live.com/self.aspx/Public/TreoWM/Treo750% 7C_2% 7C_23% 7C_ROW% 7C_EN% 7C_DesktopUpdater.part1.rar
Part 2:
http://cid-ef9806ee2eeba479.skydrive.live.com/self.aspx/Public/TreoWM/Treo750% 7C_2% 7C_23% 7C_ROW% 7C_EN% 7C_DesktopUpdater.part2.rar
the files consist of 2 part. the 1st part is around 48MB and the 2nd part is around 14MB, but after i extract it, both files contain the same files and at the same size, which is Treo750_2_23_ROW_EN_DesktopUpdater in both .rar files. thts really make me confuse
any1 know how & why?
Click to expand...
Click to collapse
What are there password ? Tell me please.