I just got a treo 750 from ebay but it did not came with battery or charger, my question is if it is possible to turn on the phone with just the ac adapter but with out the battery? why? because I got an ac adapter from a friend (no he does not have a battery) but the phone does not turn on and I dont know if it is because it does not have a battery or the or the phone does not work, so can anybody with a treo 750 can try to turn the phone with out the battery to see if it turns on and let me know, please?
Thanks for any reply
you can wire the pins, but att, conect only the +&-, do not conect any to the ground pin, and don`t forget that you have 2+pins and 2-pins... so you will need to be carefull...
att, your device may burn!!
so what you are saying is that if I connect the ac adapter with out the battery the phone will not work 'tll I have a battery?
oscarillo said:
so what you are saying is that if I connect the ac adapter with out the battery the phone will not work 'tll I have a battery?
Click to expand...
Click to collapse
fyi, my 750 works even with no battery installed, just the ac adapter.
regards
mb
marleyb said:
fyi, my 750 works even with no battery installed, just the ac adapter.
regards
mb
Click to expand...
Click to collapse
Thanks a LOT!!!
marleyb said:
fyi, my 750 works even with no battery installed, just the ac adapter.
regards
mb
Click to expand...
Click to collapse
I can`t on my treo :S
superhiperclim said:
I can`t on my treo :S
Click to expand...
Click to collapse
mmmm.... interesting, is it a 750?
Neither can I. i have to have a battery installed to turn it on.
Related
I buy a new battery for my Qtek 2020 from http://www.dealextreme.com/details.dx/sku.8464
I receive the battery today and I put on the PDA and then connect to AC adapter...
the battery stops charging in 96% and I disconnect AC adapter, but the phone turns off and only works connected to the AC adapter.
If I use the old battery it works well, but with the new one, only work connected to the AC adapter.
now I have it connected to the cradle, and seems to be charging and says that it is 100%, but after a while it restarts and I don't know why
It's possible that the battery is not charged and windows mobile shows 100%?
my old battery is same model but as only 1200mAh, the new as 1600mAh.
sorry for my english, any help will be appreciated.
thanks.
Sounds as though the new batery is either not connecting correctly in the XDA or is a fauty unit that wont hold a charge. Given thatthe phone turns off immediately you disconnect the AC i would suspect the former.
Check there isn't stick stuff / tarnish over the battery connecters on the new battery - and that the pins are making contact.
Is it a genuine-looking battery?
Mysterious Stranger said:
Check there isn't stick stuff / tarnish over the battery connecters on the new battery - and that the pins are making contact.
Is it a genuine-looking battery?
Click to expand...
Click to collapse
it's the battery from the link, it's not genuine, but seems equal to my other battery.
the new battery says Made in Taiwan and the old says Made in Japan.
apparently the new battery is full charged, but PDA don't use the charge...
thanks for the advice, the connetors and the pins are clean.
are there double power battery for the o2 xda II?
hebigakure said:
are there double power battery for the o2 xda II?
Click to expand...
Click to collapse
I don't think so, I got a 1300mAh (which is a genuine 02 product) for my xda2 and use the original as a back up battery.
Hello to all XDA-Developers and mortals
After years of using this forum and always being helped by just using the search function, this time I need to make this Post to hopefully get some help.
I have right now a touch Pro, with the original rom from HTC support site on my tPro. (Before it was several different Energy roms)
since a week my only chance to get my tPro charged is, using a USB connection cable since the original charger won't charge furthermore it discharges my device in less than e few minutes. I can actualy watch it sucking it out.
hase anybody an Idea what might fix this problem.
I want to (miss)use this post to thank all the chefs and developers that have worked on improving our everyday experience with our devices.
thank you all.
just go to start-->settings-->system-->battery and should say something about not charging on pc and you should be set from there
XERO_Racer said:
just go to start-->settings-->system-->battery and should say something about not charging on pc and you should be set from there
Click to expand...
Click to collapse
there is the option that says [do not charge over USB if conected to PC]
if I uncheck this one it won't even charge over USB, but my problem is that the battery is not charged with the original charger.
s.zamani said:
there is the option that says [do not charge over USB if conected to PC]
if I uncheck this one it won't even charge over USB, but my problem is that the battery is not charged with the original charger.
Click to expand...
Click to collapse
have u shut off the phone properly and take out the battery for like 30 seconds and putting it back in and connecting the charger? if that doesnt work, look for a spare USB cable sometimes USB cables give in at times, or look for a usb ac charger
Yesterday i installed some apps on my tab (P5110) with cyanogenemod11 then i plugged the charger ,after at least 2 hours the baterry was still 1% then today morning 10:00 i shut down my tab and now 15:00 it's only 40 % i installed mokee and same thing ,doesn't charge i have a wall charger Please help me !!
Sorry for bad english
look at battery stat, see whats draining...wipe battery stats
0semaj0 said:
look at battery stat, see whats draining...wipe battery stats
Click to expand...
Click to collapse
When i plug the charger it's says "Not charging" but when i shutdown my tab it's charges but its takes forever to full charge !
sidodz said:
When i plug the charger it's says "Not charging" but when i shutdown my tab it's charges but its takes forever to full charge !
Click to expand...
Click to collapse
Try another charger. Quite a few people seem to be complaining about the OEM Sammy chargers going kaput. Also could be a cable problem (broken wires) - I had a similar problem with my wife's tablet, fixed by replacing a cable.
kt-Froggy said:
Try another charger. Quite a few people seem to be complaining about the OEM Sammy chargers going kaput. Also could be a cable problem (broken wires) - I had a similar problem with my wife's tablet, fixed by replacing a cable.
Click to expand...
Click to collapse
Tnx everyone for your help i will buy a new one .
sidodz said:
i will buy a new one .
Click to expand...
Click to collapse
Before buying a new charger, I would suggest confirming the exact problem first. You may be able to borrow a charger from someone (any USB charger with approx 2 Amp output will work, for example, from an iPad), or a cable. See what fixes the issue, and get a replacement. Also, if you have some average soldering skills, the cable can fairly easily be fixed at home (in case it is a faulty cable) - the wires usually break at the connector, and the OEM Sammy 30-pin connector is snap-assembled, not glued, so you can take it apart and put it back togethet. Good luck!
kt-Froggy said:
Before buying a new charger, I would suggest confirming the exact problem first. You may be able to borrow a charger from someone (any USB charger with approx 2 Amp output will work, for example, from an iPad), or a cable. See what fixes the issue, and get a replacement. Also, if you have some average soldering skills, the cable can fairly easily be fixed at home (in case it is a faulty cable) - the wires usually break at the connector, and the OEM Sammy 30-pin connector is snap-assembled, not glued, so you can take it apart and put it back togethet. Good luck!
Click to expand...
Click to collapse
Thanks for your suggestion but i alreadh bought a new one but thanks againe for your help
sidodz said:
Thanks for your suggestion but i alreadh bought a new one
Click to expand...
Click to collapse
So... Does it work now?
kt-Froggy said:
So... Does it work now?
Click to expand...
Click to collapse
Yes it's works , and i gave the old charger to my uncle and he said that the problem were in the USB cable
Hi all, i have a problem with my s6. I repaired my s6 usb port and changed it with a new one. But still my phone charges at 250mah instead of 2000 and my pc wont recognise it, any suggestions?
A kind of "script-type" solution, but have you tried different USB cable? I suggest you buy a proper one, like 28/24 gauge USB cable.
These are a bit more expensive, but charge very well. Much better quality and charge faster.
Already changed ton of cables and usb ports, still the same problem
up
up
up
up
Try To boot in safety mode volume Down + Power key
merwan said:
Try To boot in safety mode volume Down + Power key
Click to expand...
Click to collapse
Already done
up
up
up
up
I think your charging ic on logic board needs replacing. Only micro solderer people can replace that. Might not be worth for you.
i ve lent it on a samsung repairer guy. they changed battery, connector and installed a new os. now they said they should give me it tonight or tomorrow.. let s see if it works
ManuelBiancolilla said:
Already changed ton of cables and usb ports, still the same problem
Click to expand...
Click to collapse
The way I read that you're expecting to get rapid charge from pc ports. Need a rapid charger for rapid charging.
ManuelBiancolilla said:
Hi all, i have a problem with my s6. I repaired my s6 usb port and changed it with a new one. But still my phone charges at 250mah instead of 2000 and my pc wont recognise it, any suggestions?
Click to expand...
Click to collapse
Same issue here. Think its related to a charging chip
Hi,
I've got the exactly same problem here. Repacinfg battery and the USB port of the phone did not solve the problem. Did your repairing work out? Any more ideas?
Br
Johannes
Hello all :
I have exactly the same problem that you all I have 250 to 300ma really charge, that it is any charger of 0.5 amps 3.1 amps either with a quick charger from Samsung or quick charge 2.0 or other, any cable too, and any rom, tested Global, Lineage and stock.
Oooo, and i tested with a custom charger, 9v 2amps, nothing change !!! 0.250amps and 5hours to 50% -> 100%....
Is really strange problem.
Any Idea ? is possible to limitation software ???
Poebat said:
Same issue here. Think its related to a charging chip
Click to expand...
Click to collapse
Yes is possible, but here i dont know.. beacause, it would have quite different effects depending on the chargers and on the voltage. here we have, in my case, the same problem regardless of the charger amps or voltage.
this is more like a software crash of the chips in the worst case.
Other hand I noticed that I had lost all utilities USB my phone example when I plug it on my computer it is absolutely not recognized... Any Idea for that ???
Thanks
Up
Need help.
In software, how or where is manageme the charge ? In the kernel ?
Is strange, the charge is blocking at 250ma...
My phone didn't come with a charger so I had to buy one off ebay. The thing is my phone will only charge with said charger and no other, but will charge with any cable plugged into my laptop.
Is this by design or is there a weird issue with my phone? Anybody else had similar issues?
Thanks.
tried diffident AC adapters?
zinou111 said:
tried diffident AC adapters?
Click to expand...
Click to collapse
Yes. A HTC and another Samsung one.
Anyone have any idea/solution?