Related
I ran it according to farias instructions I thought. It flashed but now I cant install anything and I cannot write to the storage card or the phone, any cab i try to install is unsuccessful and I cannot save any files to the storage card or the phones memory.
And it appears that I cannot flash the rom again. Am I screwed?
What is you IPL / SPL? IS your phone a G3 or G4? Can you get to the bootloader? (turn off your phone (pull the battery if you have to) then hold the camera key down while you turn it on). You can flash directly to the bootloader (even though activesync won't connect.
BTW: If this stuff makes you nervous, you probably shouldn't be cooking... Your phone will do all sorts of weird stuff when you screw up a build. And you should really know how to recover from most things that can happen...
I have done this before, this is the first time I have ever had a problem. my IPL/SPL is 2.26. And the phone is unlocked.
beowolf said:
I have done this before, this is the first time I have ever had a problem. my IPL/SPL is 2.26. And the phone is unlocked.
Click to expand...
Click to collapse
ok, cool... wasn't sure... So can you get to the bootloader?
yes I can get to it
I am flashing back to the t-mobile 2.26 rom. Working so far, I will leave the cooking alone. Can you recommend a good wm6 rom that doesnt have any problems?
"doesn't have problems" is the catch
I'm partial to my own Crossbow Reloaded ones, but they aren't perfect. If you don't hit the keypad issue with 1.7 though, its pretty close
Core 2.0n is very good and nice and clean.
Also NBD and Wizard Mobile 6 are both supposed to work well.
The new "official" rom we are playing with is beta, but I have to say its really fast and we aren't seeing much wrong with it (but its only been 12 hours since its been released). There are a couple of issues that are fixed with cabs (CommManager for one).
As for cooking, you probably eith had something wrong in a .rgu or somesuch. Just takes a number of builds and flashes to get it right to where it boots (then you debug what you forgot in packages and start over )
Hello,
I've tried flashing my Kaizer by all different ways I could, but no way to make it work. I've downloaded a lot of different ROMs (Alex, Dutty, VIET, etc), but I always get stuck in the same point. Either in Vista or XP, RUU always stops with ERROR [262] and the phone after the three-color screen, get in blank with a bar in 0% and gets stuck.
So, I've tried flashing via microSD. No better luck on that; even using different SDs, I always get stuck in a Loading... message in the phone, and nothing happens.
I've read a lot of forums and done all suggestions such as not using Anti-Virus, Firewall, etc and formatting SD as FAT32.
One interesting thing is ActiveSync (and WMDC in Vista) simple "dies" after the phone goes to the Three-color screen so it sounds the "new hardware found" sound but no new hardware seems to become available. I always can soft reset it and my old ROM (and configs) come back, so nothing seems to be done to phone's ROM.
This Kaizer was bought in the US (Amazon.com), unlocked, in Feb/08. I had some rare Freezing Problems on it (freezes while idle).
Today's config:
WM 6 Professional
CE OS 5.2.1620 (Build 18125.0.4.2)
ROM 1.82.721.0 WWE
Radio 1.27.15.32
Thank you in advance for any ideas on flashing this phone.
Regards. RB.
I'm assuming you've RTFM'd, but nowhere do you mention that you have installed Hard-SPL.
http://forum.xda-developers.com/showthread.php?t=334679
Done?
You should probably do more research and reading. Start with the Wiki and specially HardSPL search for it. The answers are in here you just need to search. Welcome to the forum and this is not a spoon fed forum but rather put your time in the research before you brick your phone. HOPE YOU WON'T GET FLAMED....
What about HardSPL?
Thank you for fast replies.
I've also tried HARDspl, my efforts went there when nothing worked. I could make HARDspl run some code in my phone (had to hit "Continue" on phone's screen), but I got a freeze blank screen instead of the Three-color/USB screen.
So, I've forced the Three-color screen by reseting the phone (and got the USB sign), but the HARDspl's updater got, again into ERROR [262]. Ok, I didn't believe this was goig to work anyway, but tried it (considered safe to try).
I have tried HARDspl from a Vista PC, I'll try again from a XP box. I'll also read more on HARDspl.
So, as you can seen not even HARDspl seems to be workimg in my case...
Thanks. Regards. RB.
sigh.......why do i even bother.........
HardSPL will not install - WHITE SCREEN: SOLVED
try to guess where i found that link
rfbrandao said:
Thank you for fast replies.
I've also tried HARDspl, my efforts went there when nothing worked. I could make HARDspl run some code in my phone (had to hit "Continue" on phone's screen), but I got a freeze blank screen instead of the Three-color/USB screen.
So, I've forced the Three-color screen by reseting the phone (and got the USB sign), but the HARDspl's updater got, again into ERROR [262]. Ok, I didn't believe this was goig to work anyway, but tried it (considered safe to try).
I have tried HARDspl from a Vista PC, I'll try again from a XP box. I'll also read more on HARDspl.
So, as you can seen not even HARDspl seems to be workimg in my case...
Thanks. Regards. RB.
Click to expand...
Click to collapse
Do a search for HardSPL white screen. There's a thread in this very forum about it freezing on a white screen.
I think I remember some issues with it on Vista, but I don't have Vista, so I don't pay attention.
You must HardSPL first. Search for HardSPL and whatever issue you're having, and I bet you can find a resolution and have it unlocked inside of ten minutes.
Xtreme_G took the time to search and post a link, and still managed to beat me to it. Bastard.
i guess you need a heavy paper weight so keep flashing without installing hardspl or without reading and searching ...
XtreMe_G said:
sigh.......why do i even bother.........
HardSPL will not install - WHITE SCREEN: SOLVED
try to guess where i found that link
Click to expand...
Click to collapse
Thanks alot, i was taking a swig of mt.dew as i was glancing at your reply, thanks to you its coming out of my nose.
let me guess, you were a previous iphone user?
I'm feeling nice. Your answer is here. It will fix all of your problems.
P1Tater said:
I'm feeling nice. Your answer is here. It will fix all of your problems.
Click to expand...
Click to collapse
This is beautiful. Definitely solve this problem. ROFL
there's no problem that rick cannot solve
I could flash the phone properly now. HARDspl was the key.
Thank you guys for the support.
RB
P1Tater said:
I'm feeling nice. Your answer is here. It will fix all of your problems.
Click to expand...
Click to collapse
==
rfbrandao said:
I could flash the phone properly now. HARDspl was the key.
Thank you guys for the support.
RB
Click to expand...
Click to collapse
Rick saves the day again.
Hello guys...
Iam not new, and i have already flashed my first(it was wasted not by my fault)KAISER, it was one year ago and i did it with HARDSLPv1, and lately added some new roms cooked by sakajati(respect)...
Yesterday i bought new one(but one year old) so i tried to flash him as well, i have used HARDSPL 1.93, and then i tried to put Sakajati"s 4th feb ROM, but i come across one big trouble, everytime i try to put it on i encounter the same RUU error:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue. Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
what to do...????
i am very afraid that i destroyed my Kaiser...???
what it means that Wince is destroyed...
Please help me, i am desperate...
Iam not new,
Click to expand...
Click to collapse
But the solution could be found here (search)
If you see the tri color screen everythng is ok, just win mobile is destroyed. Try to flash a rom from your sd card
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
greganovak said:
Thank you very much...
I hope it will work, i really did search for about an hour and tried to put rom on sevral times, but i didnt find nothing 100% secure, i dont want to indanger the unit any more that i did...
thanks again, i will try it tommorow morning at my job, thats where my SD card is...
)))
Click to expand...
Click to collapse
Part of the problem is that 1.93 is a jump spl and should be used to upgrade to Hard spl 3.29 or 3.56, not as an spl on its own. You need to run jump spl 1.93 from your device and make sure you are connected to your computer, when you see the bootloader you need to unplug your USB, count to 10 and plug your USB back in then flash a hard spl to your phone! Again 1.93 is not a Hard Spl by itself, it is only a middle man to flash a Hard Spl.
I think the best would be to flash a stock rom at first, cause therefore you don't need an other bootloader. Then flash Hardspl (3.29 if you have a kaiser or 3.56 if you have a tilt) and then flash any rom you want
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
It realy doesnt make that much of a difference, I have a tilt and I use 3.29 and I would recomend it to anyone over 3.56 so flash either one, they will both work! And your english is great so no need to say sorry!
greganovak said:
i obviusly have a lot to learn, mate how do I asses if I have TILT or KAISER, what is the main difference...
[email protected]: i have already DL the stock rom before i posted the tread, i hoped on that resolution if there were no answer...
in about 10 hours from now i will get my hands on my tilt/kaiser and hope to arranged the mess i done; I drop by in any case at that time and notify you about condition and my successes...
p.s.:sorry for my poor english...
Click to expand...
Click to collapse
A Tilt is a At$T branded Kaiser, a TyNT II is a HTC branded Kaiser. Tilt has a different keyboard and OEM rom., only differences. People say use 3.56 if you have a Tilt because that is an AT$T Spl, but I use 3.29 on My Tilt and it works great so it doesn't really matter.
hey...
nothing seems to work...
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Then i flashed the HARD spl 3.29(have kaiser) via SD steb by step first with this instruction: http://forum.xda-developers.com/showthread.php?t=433835; and it dint go through
so i tried with this instruction: http://forum.xda-developers.com/showthread.php?t=420683
it didnt work either, they are the same I know(noticed later);
So problem is that i stuck at WHITE screen that says "LOADING..."
nothig else...???
finally i manage to load/boot the htc rom from xda-wiki site, but i have to chose another one
I have tried to put default rom dl from here: http://wiki.xda-developers.com/index...me=Kaiser_ROMs but the problem is that it is not bootable from SD, that has to be because the USB conection isnt on (i selected the 3.34.721.2) so i given up that way
Click to expand...
Click to collapse
Hey man, nice to see that your device rewakes, you can flash every rom from sd card, simply rename the nbh file to kaisimg.nbh than restart into bootloader and it will automatically take the one from the card
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
greganovak said:
Unfortanly, althought i would like you to be right, you are not. When i tried to do it via SD, i stuck at white screen saying LOADING...(blue) and nothih further... and i tried also the Cmonex_s Hard SPL3.29_SD which also stucks at same screen
So now (after updatig with default rom) that i have basicly normal working device i startet from the top. Using @mskip"[email protected] tutorial called: Flasing your first rom (for noobs); it all goes well, till i start to update RUU(sakajati 4 feb) if it matters, and i tried both (spls 1.56 and 1.93), it stops updatig at 17% and notrhin else then works just puting back the HTC default rom from wikiXDA side(thank god for that)
i am thinking of MTTY, although i dont know what it does guys here almoste all say it fix bad rom flash, but i am not sure if thats my main problem, i rahter think it has something with spls...
if someone has some good advice i will be very grateful...
Click to expand...
Click to collapse
Hi,
I couldn´t flash my Kaiser via SD at the first time and tried something that worked.
The SD´s are formatted in Fat16 usually, try to format to Fat32... It seems like a stupid thing, but worked for me.
Reagards and good luck.
SD must be formated FAT32, to work, also I sugest a smal card, 512 or something like that, SHDC usual doesn't work
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
greganovak said:
I have 1GB SD and its not shdc, so thats ok.and i have done it right now, like you two guys said so i formated it with FAT32 but still no succes.
I guess that this tree lines in red/green/blue screen arent right:
KAIS130
SPL-3.02.0000
CPLD-8
i thing this SPL has to da something to do with all this mess a have done
I have flashed a couple of roms( i had three devices) and i flashed a few for my friends and all was OK till now, and i dont know what else to do...
Click to expand...
Click to collapse
Yes, you still have a stock spl on there. It needs to be hard spl'd before you flash anymore. Check out the stickies at the top of the forum.
hi again...
Well, I respect the "rules" of forum, thats why i wouldnt ask for insructions that are already written(thanks for the authors) with that i mean stickys, because i read them, almost all...
But I still tried once again, and I came across the same thing, i stuck at 17% when loading RUU or if i choose the VIA SD i stuck at white screen with blue text saying (LOADING...)...
nothing else helps than loading the dafault ROM by HTC... as i already said once again...
if i manage to solve the problem i will be in touch; what do you thing about MTTY
Edit 1:
i have done everything as it says in the instruction, and just like some of you "replyed" me...
but i always stuck at 17%when loading RUU, when i flash it with SPL 1.56 or 1.93 i never get stuck at white screen it always apeare the mentioned SPLs nimbers and some other text in yellow but when i then load RUUs i stuck at excatly 17% nothing less nothing more
edit 2:
yupi....yupi
i made it...
http://forum.xda-developers.com/showthread.php?t=354061 here is my lifesavior...
those instruction were the one that helped my problem...
it is very nice to ba a part of this community....
Okay, im really confused after reading all these threads
i used to have a kaiser (but it turnt out to be faulty) and managed to flash hardspl, flash new roms (had wizard, hermes and raphael and flashed all those too) so i'm not a newbie to flashing however im a tad confused about all the new hardspl (jwocky) etc and jumpspl? can someone just give a quick summary about what to do and why it has changed from the ordinary hardspl? as i am looking at buying another kaiser
thank you ever so much
HardSPL Info
kingsizeriz said:
Okay, im really confused after reading all these threads
i used to have a kaiser (but it turnt out to be faulty) and managed to flash hardspl, flash new roms (had wizard, hermes and raphael and flashed all those too) so i'm not a newbie to flashing however im a tad confused about all the new hardspl (jwocky) etc and jumpspl? can someone just give a quick summary about what to do and why it has changed from the ordinary hardspl? as i am looking at buying another kaiser
thank you ever so much
Click to expand...
Click to collapse
I think most of the info, and donwload links that you're looking for are at the following link below. Hope that helps you.
http://forum.xda-developers.com/showthread.php?t=498320
i did read that but still wasnt sure about it all, maybe im getting older (by 5 months haha).
what is jump spl used for? and why has it all changed from a few months ago!?
HardSPL
kingsizeriz said:
i did read that but still wasnt sure about it all, maybe im getting older (by 5 months haha).
what is jump spl used for? and why has it all changed from a few months ago!?
Click to expand...
Click to collapse
I don't believe anything has changed in regards to installing a HardSPL to a phone. I've been following the same procedures for the last year or two. The Jump Spl files are used when changing / updating your HardSPL via ActiveSync (the only way I do it). Following the instructions on the thread below works like a charm, I've never had a problem. The instructions say HardSPL v3.29, but you can use any of the current HardSPL's just the same.
http://forum.xda-developers.com/showthread.php?t=433835
Fair enough, as im used to just hardspl'ing the device rather than jumpspl then hardspl.. will do it by the book though when i get my new one (if i manage to sell my poxy blackberry!!!)
All the SPL types are on the SPL Questions wiki page in detail, so I'll save myself repeating.
The reason for the 1.* and 3.* different SPL versions is for WM 6.0 and 6.1 respectivly.
See my Hard SPL sticky for another breif overview.
Dave
Hello everyone.
Yesterday I saw that there was a new update of my favourite rom EnergyRom. So today I downloaded it, installed it, everything went well. Until I restarted my Raphael ( raph300 btw). It kept stucking on the bootscreen.. even after I installed the rom again it still stucked at bootscreen. So I began trying to fix it with installing my hardSPL again, that didn't work either, still no further than my bootscreen.. after a while I decided to downgrade my spl to my stock-spl. that went well but still stuck on bootscreen. So I tried to install my stock-rom from my provider: (t-mobile netherlands). But then the Rom updater stuck at 0% and I received the well-known [262] error. Suddenly I saw that I stupidly accidentally installed the cdma version of EnergyRom instead of the one I needed: GSM. That explained why it wouldn't boot in the first place. Now I tried to install the olinex hardspl, but the updater stopped everytime with the 262 error. I connected my device to another computer with windows XP, but there I saw that the computer recognized it as a CDMA device.
I know it is a stupid mistake, but is there anybody who knows what I could try? I also tried to hard-reset it, but that wouldn't help either. Any help would SO be appreciated
try to search a tool called MTTY maybe it helps
lvxincad said:
try to search a tool called MTTY maybe it helps
Click to expand...
Click to collapse
Thanx, but how can I use this in combination with my problem?
As I remember 2 years ago,HardSPL is somehow depended on RadioROM. Maybe the ROM influenced the Radio with HardSPL,so try to reflash HardSPL again and Radio. Or it works absolutely not?
http://forums.techarena.in/hardware-peripherals/1161954.htm
http://forum.xda-developers.com/showthread.php?t=371154
http://htcwiki.wetpaint.com/page/RUU+Error+List
TomasNM said:
As I remember 2 years ago,HardSPL is somehow depended on RadioROM. Maybe the ROM influenced the Radio with HardSPL,so try to reflash HardSPL again and Radio. Or it works absolutely not?
http://forums.techarena.in/hardware-peripherals/1161954.htm
http://forum.xda-developers.com/showthread.php?t=371154
http://htcwiki.wetpaint.com/page/RUU+Error+List
Click to expand...
Click to collapse
No, I can't update any ROM. So now i'm stuck with my stock SPL, therefore I wanted to Hard SPL my device, but that didn't work and since then I haven't been able to update any ROM.. would flashing on a different PC help maybe? now I am on a Win7 Pc but maybe it will work in WinXP..
It is also not a bad idea to try different PC with XP to flash. I remember apx.1 month ago I tried to update HTC Trinity with WM6.5 ROM and it keeps failed with some errormessage(nowadays I can't remember which,but the syndroms was similar). Then I considered it as "bricked",until I tried another PC and everything wents correctly and the phone is in its productivity again. Yes,tfirst PC was company notebook with lot of safety kind of software(firewall,this,that,etc...) and the second one was my private laptop at home,just equipeed with regular antivirus software,all updates disabled(instead of AV).
Btw,what about trying to flash official ROM,while you are with stockSPL? Maybe it helps you to startup again the device and then HardSPL again afterwards...
TomasNM said:
Btw,what about trying to flash official ROM,while you are with stockSPL? Maybe it helps you to startup again the device and then HardSPL again afterwards...
Click to expand...
Click to collapse
yeah, that's what I thought too. I tried that also, also tried other custom roms btw before going to the stock rom. But with the stock rom it also stuck at 0% on the update
so, today I tried to flash my rom with two different computers: one with win7 and one with winXP. didn't work either.. I read the MTTY thread and after I installed the custom driver I was able to connect trough MTTY. But what commands should I use to clear the ROM and is there any way that I can update my rom via MTTY?
search MTTY on the forums the first link has all you need to clear the rom and flash via MTTY
I think you may be screwed. You should've asked for help before you started messing with the spl. I don't understand why you thought reverting to the stock spl would be a good approach; it may well be the end of your device. What you should have done is just flashed a stock rom-that would probably have restored your device. Re-flashing hard spl is kind of pointless. The only thing that can over-write hard spl is the special 'stock spl' that olinex put together. It's not entirely stock, and I am not sure that it can be over-written by hard spl. The sole purpose of the 'return to stock spl' is so that you can flash a stock rom, then restore the spl so that you can return your device for warranty/service without being dinged for having unofficial firmware on the device. When you do this, you aren't anticipating getting the device back, so I'm not sure that hard spl can over-write it. I know there have been discussions on whether or not it can be over-written, but I'm not sure that there was ever a clear answer. Anyway, with the 'stock spl' on the device, you can't flash any cooked roms to the device. If you are very lucky, you may be able to flash a stock rom. So, my advice is to try a few stock roms.
I'm pretty sure you'll need hard spl to run mtty/task 29, so I wouldn't waste your time on that. I really doubt it works, and I'm not sure what it's going to buy you, anyway. You really need to be able to flash a rom to the device, and you can't flash a cooked rom with that spl. Maybe you can flash a stock rom, but maybe not. I'm not sure which carrier it will let you upgrade to, either.
NeoTokyo22 said:
search MTTY on the forums the first link has all you need to clear the rom and flash via MTTY
Click to expand...
Click to collapse
yes I did, but the problem is that I can't access my Internal Storage, so I can't put any ROM's on that. Tonight I tried to flash a ROM via my SD card, but when I put my device in bootloader-mode it kept saying that it was 'loading...'
If the bootloader just says 'loading', then you probably need to either reformat the card to FAT32 or rename the image to RAPHIMG.nbh. Make sure you get the extension correct (not RAPHIMG.nbh.nbh).
But you're not going to flash anything with the stock spl, anyway. You need hard spl. I'm not sure you can even flash a stock rom off of the sd card-it probably needs to do it over usb.
I updated lot of smartphones already,but it was already few years ago. However I think,that SP's are flashed with MTTY. For that I needed ROM image in nbh file and with some commands you tell the PC,that it should flash it. Don't forget to disable USB connection in Activesync on XP in case MTTY will connect.
TomasNM said:
I updated lot of smartphones already,but it was already few years ago. However I think,that SP's are flashed with MTTY. For that I needed ROM image in nbh file and with some commands you tell the PC,that it should flash it. Don't forget to disable USB connection in Activesync on XP in case MTTY will connect.
Click to expand...
Click to collapse
I already managed to connect my device with MTTY, the only thing I need to know is which commands I can use to flash the ROM through MTTY. It just sucks that I am not able to go to my Internal Storage, otherwise it would be much simpler I think.
Farmer Ted said:
I think you may be screwed. You should've asked for help before you started messing with the spl. I don't understand why you thought reverting to the stock spl would be a good approach; it may well be the end of your device. What you should have done is just flashed a stock rom-that would probably have restored your device. Re-flashing hard spl is kind of pointless. The only thing that can over-write hard spl is the special 'stock spl' that olinex put together. It's not entirely stock, and I am not sure that it can be over-written by hard spl. The sole purpose of the 'return to stock spl' is so that you can flash a stock rom, then restore the spl so that you can return your device for warranty/service without being dinged for having unofficial firmware on the device. When you do this, you aren't anticipating getting the device back, so I'm not sure that hard spl can over-write it. I know there have been discussions on whether or not it can be over-written, but I'm not sure that there was ever a clear answer. Anyway, with the 'stock spl' on the device, you can't flash any cooked roms to the device. If you are very lucky, you may be able to flash a stock rom. So, my advice is to try a few stock roms.
I'm pretty sure you'll need hard spl to run mtty/task 29, so I wouldn't waste your time on that. I really doubt it works, and I'm not sure what it's going to buy you, anyway. You really need to be able to flash a rom to the device, and you can't flash a cooked rom with that spl. Maybe you can flash a stock rom, but maybe not. I'm not sure which carrier it will let you upgrade to, either.
Click to expand...
Click to collapse
Oke, thanx for your input. I tried to reset my ROM memory with mtty/task 29, but that didn't work, just like you predicted. So my next question is: 'Is there any app that can perform the task 29 without MTTY?'. I googled it, but I could only find the task 29 app for the HTC HD2.. And further, does anybody have a recovery ROM for my RAPH300? I tried the stock ROM on the XDA thread of HTC Raphael, but still got the 262 error
There's really no point in doing Task 29. The bad rom isn't what's killing you now, it's the SPL. It's going to block task 29, no matter what you try (that's one of it's jobs). You should just try to get hard spl back on the device, or try flashing every stock rom you can find. I tend to doubt that either will work, though. The only other option would be to look up the jump spl developed by PoF. I don't remember the name (search for threads started by him), but it was a universal soft spl that would temporarily CID unlock devices so you could flash custom roms. I've never used it before, and I don't know how it loads. You may not be able to load it onto your device with its current state, and it may not even be compatible with a Raphael (it's 3 or so years old), but it's probably worth at least checking out.
Edit: here's the jump spl link. I think you may have to activate it off the device.