hello all. i've tried to update the rom on qtek s100, but my battery was 48%. all good, but at 45% of updating, it stucked. and, now i only can enter in bootloader mode. i tried to put 1.13 or 2.01 or 2.03 but still eror: the rom isn't designed for your device. or something like that. error 150. what should i do?
P.S. Sorry for my bad english.
ady_uaic said:
hello all. i've tried to update the rom on qtek s100, but my battery was 48%. all good, but at 45% of updating, it stucked. and, now i only can enter in bootloader mode. i tried to put 1.13 or 2.01 or 2.03 but still eror: the rom isn't designed for your device. or something like that. error 150. what should i do?
P.S. Sorry for my bad english.
Click to expand...
Click to collapse
Drain all battery. Then turn it on charging. It worked for me
same prblm
the smae prblm iz with me but how to drain battery
tell me
i don't think this is the solving for my problem, but, i will try it. and i will let you know. 10x
Related
I recent have an error while Upgraging my Jam whith latest firmware..
Evrithig goes ok but after stage 1 I ve got DAWN screen
And my jam has not worked anymore ..
Look the attached Screen
maybe anyon know about this problem ?
Same Problem
Hi Xaoc,
I have the same problem with my T Mobile MDA Compact. My Compact does not work anymore, too. When I try to turn it on, it does not. It turns on the Bootloader mode. On the screen; at the top it writes "Serial" and at the bottom it writes "v 1.00" and thats all, it does not turn on anymore.
It occurs when I tried to flash my German ROM to English ROM.
Once I solve the problem I will inform you. Please inform me if you solve the problem.
Thanks
AE
Ok man..
I will post info here, or just send this devise to technikal support
Technical Support
Sending the device to technical support will be the last choice. If they accept the device as this condition under the warranty no problem otherwise they will charge too much money to fix the device!!!
AE
Hi Guys. I have absolutely the same problem see http://forum.xda-developers.com/viewtopic.php?t=19548 here. Try one thing. It´s not solution, but for me working as emergency solution. Try to pull a little bit back battery cover to disconnect battery for a second and then push it back. Try to push on/off button. Device should start. And never do a soft reset by soft reset button or by software reset button. Always use back side cover or the device start in bootloader meno again.I alread try almost everything to solve the problem and no way. Even my compact cant read backuped SD card. That´s why I have only this emergency solution
I don't have this problem myself, but I read on this forum somewhere that connecting your Compact to to USB cable and running the update program again should fix this error. The error bascially means that the ROM upgrade failed. re-connecting and re-running the upgrade program from your desktop pc should work. Good Luck and let us know whether it works. In several other threads the problem is mentioned and fixed, so do a search.
It will work, trust me
When you see that "serial" and "v1.00" thing. That's means you are half way there already. That's in boot loader mode. When you take off the back cover (battery cover) and put that back, yeap... it'll work. Somehow that bypass the bootloader mode for that particular "restart".
What you need to do is. Just reconnect back and do the flash again, since you would have rebooted your desktop pc or laptop (the one that used to flash your Magician).
For those who encountered similar problem, restart your machine (desktop pc or laptop). then reconnect back. Try run the update again. This time, it will not be able to detect your current ROM version cause of the "boot loader" thingy. Just flash it... yes, you'll get it. Give it a try. I've done on mine and so do many others. Have fun.
cheers,
cyberjaya
I solve the problem
Hi all,
I had the same problem and finally I solved it, however now I have a French QTek S100 ROM.
Where can I find the file for upgrading the French Qtek S100 to English?
Thanks
AE
PS:I have a T Mobile MDA Compact however to fix my MDA, I upgraded with QTek S100 French ROM so I need QTekS100 English ROM now!
I had the same problem
Hi,
I had the same problem. My desktop computer shut off during the update and the second time it stoped in the same %.
I solved the problem switching computers to my laptop.
good luck
S100 English ROM
Where can I find the file for upgrading the French Qtek S100 to English?
Thanks
AE
PS:I have a T Mobile MDA Compact however to fix my MDA, I upgraded with QTek S100 French ROM so I need QTekS100 English ROM now!
T Mobile MDA Compact (using Qtek ROM)
ROM version: 1.03.02 FRE
ROM date: 11/02/04
Radio version: 1.01.00
Protocol version: 1337.38
ExtROM version: 1.03.157 FRE
I Mate JAM ROM
Hi All,
I used I Mate JAM ROM and now my MDA Compact is working in English.
AE
T Mobile MDA Compact (using I mate ROM)
ROM version: 1.06.00 WWE
ROM date: 01/06/05
Radio version: 1.01.00
Protocol version: 1337.38
ExtROM version: 1.06.150 WWE
Hi all
I have the same problem
When I upgraded my mda compact it started to upgrade
and it did not passed zero it tolled me just like in the picture in the first post
and it did it again and again and again
and finaly it crashed
it shows the boot loader
Serial
v1.00
Can you guys tell me how to fix it!!
Thx aloooooooooooooooooooooooooooooooooooooooot
qtek rom
hey cyberjaya..u said u r using the qtek rom on ur magician (mini) and m using the tx2.03 rom please can u let me know d difference between both roms which one
is better in each n every aspect that is m talkin about the (GUI),stability,features n etc..
please can u let me know so tht i can take a decesion whether to flash my device or not please...let me know.
thanks.
Chigz
hello all,
I got one Qtek S100 phone with rom version :1.03.04ITA.I tried to upgrade it for english rom but upgrade wizard ran for few seconds and stoped the response with phone.
now when i tried to power on the phone its mentioned serial(with cable connected USB 1.0)like that.
now i need a urgent solution for revive my phone .
please help me guys.
Was this your first time upgrading your s100's rom? Have you read the upgrading instructions? When the s100 is plugged to the pc, the upgrade takes some time (maybe even 20 whole minutes). You should not remove it from there. If you had checked the screen carefully while upgrading, the phone was in fact "on" (just the light was turned off) and you should have let it complete the upgrade.
Just try to upgrade the rom once more and be more patient this time.
yes i was stayed till its mentioned that some error on the computer screen.After that only problem occured.
which firmware should i use to flash this qtek S100 version i mentioned.
please let me know that.
You took the wrong tools. Read this to see what you need http://forum.xda-developers.com/viewtopic.php?t=46628
M
jugnustar
faizalg said:
hello all,
I got one Qtek S100 phone with rom version :1.03.04ITA.I tried to upgrade it for english rom but upgrade wizard ran for few seconds and stoped the response with phone.
now when i tried to power on the phone its mentioned serial(with cable connected USB 1.0)like that.
now i need a urgent solution for revive my phone .
please help me guys.
Click to expand...
Click to collapse
hi
where did you got ROM ENGLISH? p.s reply me site
Hi every one, i've tried to install the last PDVIET rom, but upgrade was interrupted.
Now, my prophet not start, i've made a hard reset, but it stands on first stage when shows pda information.
My computer don't recognize it now, so i can't reinstall the rom!!!!!
Please help!!! what can i do !!!????
force it into bootloader mode
Thank you very much, It works!!
Madcap180 said:
force it into bootloader mode
Click to expand...
Click to collapse
hello i have the same problem
iwas on pda mobiz 1.0 wm6 and i want to change for the new pdaviet 4.0.0.0
the updates was successful with the Upgrade_ROM bat ...
but after hard reset my pdaphone blocks on orange screen , i can see the OS 4.0.0.0 but stays blocked on this screen ...
You mean force into bootloader , can you help me and just says how to cause im newbie
Thanks for your advices
lookum said:
hello i have the same problem
iwas on pda mobiz 1.0 wm6 and i want to change for the new pdaviet 4.0.0.0
the updates was successful with the Upgrade_ROM bat ...
but after hard reset my pdaphone blocks on orange screen , i can see the OS 4.0.0.0 but stays blocked on this screen ...
You mean force into bootloader , can you help me and just says how to cause im newbie
Thanks for your advices
Click to expand...
Click to collapse
While pressing the camera button,softreset your device and it will go into the bootloader..
i think i hv bricked my prophet after upgrading of pdaviet rom.
the phone stalled after upgrading of rom and went reset struck on os 4.0.0.0 screen.
kindly help.
the bootloader mode as described.. is it in red/green/blue screen with word usb on the bottom left?
nothing happens when connected to pc...
activesync still cannot identify the device....
pls help...i am a noob on this....
did you downgrade to WM5 before upgrade?
zeroed said:
did you downgrade to WM5 before upgrade?
Click to expand...
Click to collapse
??? downgrade then upgrade ext rom?
if tats the case, no i did not do tat.
did i brick my phone???
what can i do now?
try to enter bootloader mode,downgrade to wm5 and then flash to wm6.good luck
zeroed said:
try to enter bootloader mode,downgrade to wm5 and then flash to wm6.good luck
Click to expand...
Click to collapse
got it back.
thanks for the response.
i also read wiki, now on pdaviet .3
seem like .4 having batt drain issue....
In Trouble
hi...
i installed ROM v4.0.0.0
since it had a lot of problem i went to ROM v4.0.0.0.3a
but my cell still hanged a couple of times so i had another installation of ROM v4.0.0.0.3
during the installation it hanged and i got a msg on my screen that itwrite cannot finish
i reset my cell and now it does not start. only thing i get is my start up screen that is HTC and
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 4.0.0.0
Dopod Enjoy mobility.
Can someone help me.....
i am stuck badly.
wiuh,my services i-mate jam dead after upgrading.
i got in bootloader mode n upgrade radio rom to 1.12 use this rom NL_11300_131_11200.exe.
i deleted nk.nbf, and ms_.nbf, so just radio.nbf
upgrade success!
then i try to upgrade with the same rom(NL_11300_131_11200.exe) without radio.nbf. fail it say error id country.ok then i try the other rom.
JAM_WWE_11200_128_11210_ship.exe
i deleted just radio.nbf,because i just want to upgrade the rom.
at ext rom upgrade it success.but when maybe about 30% uprade rom,it fail. and say error.i forgot the error.
and my i-mate dead. :'(
if i put usb cable n open the back case(baterai still in side or not) the lamp red is on.
but when i closed the back case.it turned off.
nothing happen,no indicated the pda was still connected.activesync has no sound.usb on device manager didnt indicated there was a pda connection.
so??
what must i do now?
??? this is not mine.if mine i dont care too much,but this my costumers!
anyone can help pls!
i beg u.pls!
which model u r using, i have i-mate JAMA 101.
can u tell me how u enter to bootmode?
Sree...
sreejithachuthan said:
which model u r using, i have i-mate JAMA 101.
can u tell me how u enter to bootmode?
Sree...
Click to expand...
Click to collapse
same as u did.
"please help me, i have my i-mate JAMA 101, i need to install new OS.
but cant enter its boot load. i tried camera + power + reset button this also not working...pls help me."
did that your buttons work?
i mean u have checked the button 1 by 1.(camera it self,power,then reset button?)
did that still work?
if not make it sure.dissambler it.check all the button.i can say all of the models of all pda are the same way to hard reset (as long as i know)
i have flashed many of them.
learnig said:
wiuh,my services i-mate jam dead after upgrading.
i got in bootloader mode n upgrade radio rom to 1.12 use this rom NL_11300_131_11200.exe.
i deleted nk.nbf, and ms_.nbf, so just radio.nbf
upgrade success!
then i try to upgrade with the same rom(NL_11300_131_11200.exe) without radio.nbf. fail it say error id country.ok then i try the other rom.
JAM_WWE_11200_128_11210_ship.exe
i deleted just radio.nbf,because i just want to upgrade the rom.
at ext rom upgrade it success.but when maybe about 30% uprade rom,it fail. and say error.i forgot the error.
and my i-mate dead. :'(
if i put usb cable n open the back case(baterai still in side or not) the lamp red is on.
but when i closed the back case.it turned off.
nothing happen,no indicated the pda was still connected.activesync has no sound.usb on device manager didnt indicated there was a pda connection.
so??
what must i do now?
??? this is not mine.if mine i dont care too much,but this my costumers!
anyone can help pls!
i beg u.pls!
Click to expand...
Click to collapse
the problem has been solved.i flash it many times so the batterai was too low.in brick condition, batterai cant be charged.so i changed it with other batterai.its ok now.thx for the rom.
Hi to all gurus,
Can you please help me? Everytime I boot my Tytn II, there is an error "Phone not allowed MM #6". I tried to flash the ROM to Windows Mobile 6.1, I get an error Battery row less than 50 percent. But the battery is already 100%.
Thanks in advance.
marv_chua said:
Hi to all gurus,
Can you please help me? Everytime I boot my Tytn II, there is an error "Phone not allowed MM #6". I tried to flash the ROM to Windows Mobile 6.1, I get an error Battery row less than 50 percent. But the battery is already 100%.
Thanks in advance.
Click to expand...
Click to collapse
Try putting it in boot loader first. Hold camers button while you turn it on. and then flash rom
Also,
Please don't cross post. You have same post on the Kaiser Software forum .. http://forum.xda-developers.com/showthread.php?t=529242
I guess you got a lost or stolen phone as well!