I've installed the newest build that I've seen of VC on 2 different 6.1 roms now, (DCS1.3 and Austinsync's 6.1) and I'm seeing a pattern. MS Voice Command sends 6.1 into fits... After install, the phone freezes trying to go into settings. A Soft reset will bring it back, but this is a deal breaker with 6.1 for me. I don't think this is a chef specific issue either.
ATT Tilt
DCS1.3 or AustinSync6.1 Rom
a 6.1 Radio (1.64.06.04)
MS VC Build 1.6.17193
Anyone else have this issue?
running alex ultraclean beta2 and msvc works perfectly out of the box
Mine works just fine with Dutty's 6.1 beta.
If you have trouble try what's detailed in this post
http://forum.xda-developers.com/showpost.php?p=1888102&postcount=58
Worked for me
Matt
Related
Anyone know if there i a WM6.1 ROM around that includes Voice Command & Remote Desktop along with all the AT&T stuff?
Basically I'm looking for a normal AT&T release ROM for the Treo 750, but with the OS as WM6.1.
yeah the wm6.1 normal/generic version has all the att stuff you are looking for. You can download the cab for remote desk top and cab for voice command 1.6. You can have exactly what you want with very little works.
As far as i know there isn't anything that has everything you looking for as all these wm6.1 are cooked roms. No official wm6.1 from Palm or ATT
remote desktop 6 cab:
http://forum.xda-developers.com/attachment.php?attachmentid=47732&d=1187725020
paypalbid said:
yeah the wm6.1 normal/generic version has all the att stuff you are looking for. You can download the cab for remote desk top and cab for voice command 1.6. You can have exactly what you want with very little works.
As far as i know there isn't anything that has everything you looking for as all these wm6.1 are cooked roms. No official wm6.1 from Palm or ATT
Click to expand...
Click to collapse
I tried your idea before. Remote Desktop works fine, but I can't get Voice Command to work. It will install, but it will never announce any calls or work through my headset.
The only version of Voice Command I could get in cab format was 1.60.4622.0.
The ATT offical ROMs have 1.6.18125 installed. I have a feeling that the newer versions make the difference. Any idea where I could find a newer version in cab format or an update?
I flashed some WM6.1 5.2.19209 roms, included dutty's, AT&T official, and some other from other forum.
It shows a big capability problem.
some many softwares what were running good before, cannot run on WM6.1 5.2.19209 now.
For an example, iGo 8 and Miomap 3.2/3.3.
They do not start, and no notice about why at all.
Does anyone successfully run them?
I tried some Chinese WM6.1 5.2.19209 ROM, even WM6.1 5.2.19199,
iGo and Miomap cannot run either.
More other Chinese software cannot run.
All of them do not show any notification about why.
Just show a waitting icon then nothing happen.
bobosky520 said:
I flashed some WM6.1 5.2.19209 roms, included dutty's, AT&T official, and some other from other forum.
It shows a big capability problem.
some many softwares what were running good before, cannot run on WM6.1 5.2.19209 now.
For an example, iGo 8 and Miomap 3.2/3.3.
They do not start, and no notice about why at all.
Does anyone successfully run them?
I tried some Chinese WM6.1 5.2.19209 ROM, even WM6.1 5.2.19199,
iGo and Miomap cannot run either.
More other Chinese software cannot run.
All of them do not show any notification about why.
Just show a waitting icon then nothing happen.
Click to expand...
Click to collapse
I would suggest searching more on this topic before changing to so many ROM's. Do you have HTC Home enabled while trying to run iGo?
bobosky520 said:
I flashed some WM6.1 5.2.19209 roms, included dutty's, AT&T official, and some other from other forum.
It shows a big capability problem.
some many softwares what were running good before, cannot run on WM6.1 5.2.19209 now.
For an example, iGo 8 and Miomap 3.2/3.3.
They do not start, and no notice about why at all.
Does anyone successfully run them?
I tried some Chinese WM6.1 5.2.19209 ROM, even WM6.1 5.2.19199,
iGo and Miomap cannot run either.
More other Chinese software cannot run.
All of them do not show any notification about why.
Just show a waitting icon then nothing happen.
Click to expand...
Click to collapse
I have similar problems. I cant get GPSTUNER to work with the 19209 roms... works fine on some 19199 roms (like dutty's 19199 lite rom) but on on the cube or non-cube versions of the same rom?!?!
I also have cases where GPSTUNER does not work on 19209 and then my gps mapping software (www.digi-nav.co.za) works okayish.
I also have cases on post 19199 roms where things are very slow and a lot of clicks are missed and I have no idea why this is.
I did the RickyWatt WM 6.1 ROM update which went very smoothly thanks to Karhoe's guide.
However, my T-Mobile SDA no longer has the ability to "voice tag" for speed dialing which I used a lot. Is there a fix for this?
Was there ever a response to this?
Hi,
I hope someone can help me with this issue.
I have a HTC Touch HD (Blackstone) which is from Orange UK. It is running WM 6.1 1.19.61.1.
I have been attempting to flash the rom to a version of WM 6.5.
I have run the hardspl upgrade, then have tried to flash with a number of WM 6.5 (2 from Dutty, 1 from MIRI, and a few others).
The problems I get with ANY version of WM 6.5 are as follows:-
Firstly when it starts booting it has a graphics issue, it looks like the vga driver is not installed, but if you press the power button twice the vga looks ok!
Then when it has loaded WM 6.5 and Touchflo 3D it freezes quite a lot.
Also the phone cannot connect to any mobile network such as Orange UK, when you try to turn the phone radio on it does nothing! WIFI and BT etc work fine!
Also it randomly restarts!
When I flash the rom back to WM 6.1 1.19.61.1 the phone works perfectly again!
Is it not possible to flash my phone? Or can anyone advise me on a wm 6.5 rom that will work!
Any advise would be greatfully received.
Thanks
Problem fixed
If anyone is interested I have got to the bottom of my problems with installing a cooked rom.
I followed a tutorial on flashing the blackstone on youtube which stated I should first install hardspl v1.14, well it seems this video was a bit out of date as when I read the notes on this site it stated I should first install hard spl 1.56 for cooked roms!
I did this and now my upgrades are working fine .
I now have wm 6.5 running ok on my blackstone.
For future reference, our friend Digital Outcast did a fantastic thread here : http://forum.xda-developers.com/showthread.php?t=505377
It is a sticky on the blackstone forum and easily found, a quick look would have found this, but well done for finding your own way and getting it done
HTC Blackstone HardSPL problem
Hey guys !! I have a problem with my Touch HD!
I'm trying to flash it from WM 6.1 to WM 6.5.
When i start the HardSPL after 10 seconds the phone disconnects from my PC.
i tried a lot of times but does the same all the time.
Any help will be much appreciated.
Anyone know what version of MS Voice Command will work on the WM6.5 HTC HD2 T9193?
I am using Duttys Leo HG V1.4 [5.2.21896.5.0.91] ROM.
I am looking for one to install on mine but have't found one that will work right.
I seem to have only older versions.
Thanks.