How to change the start up Logo ?
And, how to extract some extra network operator setting ?
For example, I have a Chinese version and want to extract some extended ROM *.cab file (I saw in the FTP)
which contain , for example Vodaphone setting?
could anybody give us any news.. please i need to change the start up logo as I don't like the 1 i have atm lol
for changing boot screen you can read this http://forum.xda-developers.com/viewtopic.php?t=15459&highlight=boot+image
badman : didnt catch your second question...
but if you want to extract ext rom from you magician you can do this
- hard reset
- follow the setup procedure
- when you see message 'gonna install in 3 seconds' ( dont remember the exact word ) soft reset
- you will see folder extended rom with file explorer, just copy and install what you want or need.
** EDIT **
Aplogies for not crediting ncruz as the one who edited the original files and got this working in the first place!
As per his instructions, and to make everything a bit easier for everyone, I have updated the Himalaya cab file with his updated files
** EDIT **
Thanks to TofClock for the making the cab file! I've just taken his instructions and made them a little easier to follow, I hope he doesnt mind
The Arcsoft mms composer has been extracted from the Universal rom and a cab file was cerated to work with WM 5.0 Blueangel devices.
However this cab won't install on Himalaya devices.
This is because of the following two files
ArcMMS.dll cause the install stop wis message : bla bla bla not digitally signed bla bla bla
RcDll.dll cause the install stop and prompt to install in another place , and again , and again .
TofClock has created his own cab file (which I have now updated to ncruz newest versions) with all other files and reg settings ...
Attached to this post is are two RAR files containing a cab file and 2 dll files.
To install, follow these instructions :
1. Download Himalaya_WM5_MMS.part1.rar and Himalaya_WM5_MMS.part2.rar from this post.
2. Decompress the rar file on your PC using winrar or something similar
3. Soft reset your Himlaya
4. Copy RcDll.dll and ArcMMS.dll to your Windows directory on your Himalaya
5. Copy the cab file to your Himalaya and install it.
6. Soft-reset your device again
7. After this , go the messaging application. click on Inbox you should see a new account there called MMS.
If not click on Menu>Tools>New Account
Create a dummy email account (it doesn't matter what info you fill in, just make it up) but at the Account information select MMS as the account type and click next.
Then finish going through the account creation, again for the server information making anything up.
8. Once that is completed clock on Menu>MMS Configuration then click the servers tab.
9. From here fill in your operators server settings (remember to set it as default!) and enjoy MMS on WM5.0!!
Again thanks sooo much for everyone's hard work in getting this working, especially ncruz for the initial work and the BA cab and TofClock for making the Himalaya cab file.
Great, just another thing, thoose files aren't from universal.
First, thoose files are from MY POST, i've reshacked thoose files for qvga devices, so it really pisses me off when people take credits for things they don't to.
Second, at least use my latest rcdll.dll see my post at BA forum.
The one that's in THAT cab has some huge icons. and i have hacked it a little bit more.
Third, i've already resolved the problem of having to create the account by hand.
So, if you really want to do the thing right, get the cab at my post, open wincecab editor, remove rcdll.dll and arcmms.dll, install the cab, then copy the files you've just removed and copy them to \windows.
PS: you can check the original files from universal and see that they aren't the same.
everythin is done as explained before, and no mms account appears
please help me
THankssss
Working with WM2k5_1.60c.00WWE_XDA2_HIMALAYA
thanks mjames_84 for update the cab
GREAT THANKS to ncruz for your good job , without it , i never should made this cab
paketecuento -
Have you tried this previously using ncruz manual installation?
I had trouble with that method and once I tried it even after I used the cab file it wouldn't work I had to hard reset my device and do it again.
If you did try the manual install first then you may have to do the same, it certainly worked for me anyway.
As his cab file worked great once I had removed the two dll files and had done a hard reset.
Of course if you havn't tried the manual installation previously then it could be anything you might need to give more info on what ROM version you're using, software you have installed etc...
working 100%, once updated to 1.60c....
It's strange. On my device every time I try to install the cab file I get an error message while installing. I follow the instuctions as described...
Has anybody dealt with it?
Same problem here
Get a error when I start installing. Says that I should try a different location. I"ve tried my SD and PPC. Nothing works.
Download here
It's worked with my WM5V.1.60c!!!
But i use .dll files from mjames_84 and use .cab file from TofClock. I can send and recieve my MMS!!!
Thank you
I too tried mjames files and had problems.
However I also left mjames .dll files there deleted his cab file and used TofClocks' cab file and I now have working MMS.
Thanks all!
the dll in archive with my cab are same of mjames dll and ncruz dll , i've updated the rar
Hello, thank you for the great work!
But i have a problem, no way to getting it to send messages through Vodafone italy, i had already a Vodafone MMS connection setted up by my QTEK SD Configuration wizard (dloaded from dangaard site) which worked with WM 2003 but i have no way of getting it to work in WM 2005, i keep getting the error message that my mms has not been sent. Anyone can help me please?
Thank you very much
By the way, since i almost haven't any programming skill i have Eng/Ita translation skill ^_^, so if u are interested in translating the WM2005 ROM to ITA let me know, i can help ^_^
Hi overhere,
I did precies what you said at the top,
But when I want to start MMS I get an error about a bad cerificate or something like that... please help...
Klazimodo
It works !
Upgraded to wm 5.0 two days ago.
Installed as per instructions and my MMS's work like a charme.
Thanks guys 8)
Hi guys
I installed it, no problem with installation. Send mms, GPRS Monitor shows that the mms is sending but then I get a error that says unable to send.
What can the problem be?
Use WM5 1.60c and Radio 1.08
Thanks guys
dudes, Himalaya is ****ing full of those WMstuff, so will you people try to do something for ALPINE ?
Or XDA O2IIi ?
hi there
i am not able to install
i have xda2 win2005 1.60c
i downloaded both the rar files unrared these in two dif folders one is called part 1 and the other part2
then i softreset my xda
then i coppied dll files from part1 folder
then i try to install the cab file coopied from my pc to xda
i try to install on system
but message comes up says that MMS.... can not be install
am i doing something wrong here
and y there are two rar files containig the same files
PLZ help
Regards
its working now
thanx
regards
gugi
I would like to modify shellres.dll.040C.mui (french WM6.0). So, I use first ROM Extractor. I enter \windows\shellres.dll.040C.mui in the field "Save to", and ... when I boot again, the device is frozen on the WM welcome page.
I made the same operation a couple of weeks ago but I was thinking that I made an error when editing the file then copy it on the device.
In fact, the problem seems due to the use of ROM Extractor. Copying the file in \windows seems not so good...
So, where should the file be saved ?
i already asnwered before, get a shellress file found somewhere in the forum(will give you a link if found) and just edit it, as its teh same for almost all the devices, then just cab it up and installit in your device
Ok, but I need a french version and ...
... and, for my understanding, I would like to know how to do that with the ROM extractor. Where should the file be saved ?
Help ! Where the file must be extracted ?
Which value to enter in the field "Save to" ?
1. "\"
2. "\windows"
3. "\shellres.dll.040C.mui"
4. "\windows\shellres.dll.040C.mui"
If I choose option 4 (the most logical for me), my device cannot boot (it's frozen on the Windows welcome page) even if I don't modify the file.
040C is a french version.
Anyway, if I get the english version as proposed, where the file must be installed ?
I want to do a simple job: backup my actual kaiser rom, modify my rom adding/removing some application, then cook the new modified rom.
I was looking for a lot of time inside the forums for a guide/tutorial how to dump my actual KAISER rom , then modify it adding/removing some applications, then cook the new ROM to be flashed.
After a look around I was able to dump correctly part000.raw,part001.raw,part002.raw and part003.raw.
After I downloaded kaiserkitchen_01_20_08 and installed it.
Then I downloaded Alex 5.1 OEM packages and copied into c:\kaiserkitchen\packages.
Then I downloaded Alex 5 HT ROM 3.03 and copied into c:\kaiserkitchen\sys and c:\kaiserkitchen\sys
I moved .raw files in c:\kaiserkitchen\BaseROM
Then I started kaiserkitchen.cmd. I followed instructions to extract a dumped rom and cook it. The black window worked for some minutes and finished with message : Ignore any error while deleting files ! followed by 10 lines with message Impossible to find specified file...
All seems to be ok here. Yes ?
From here I can not go on, because when I launch BuldOS+PackageTools I can see only some applications that I imagine are from Alex oem, but I want to work only with my applications and I can not find them ! Where are applications installed in my actual ROM. How can I use them to rebuild my own ROM ?
Please, help me !!!!!!!!!!!!!!!!!!!!!
I am getting this error on start up screen even after hard or soft reset
HTCMAG_ROM_WWE_3
by Cotulla
64RAM
Bad Radio
I tried to hard reset using contacts and calender with softreset it tells to press the green blah blah..
I did and still the same.
I tried to install any other upgrade else than WWE_3 but nothing
How to install a radio with this issue or how to get the original rom ? if I connect it to pc via usb it keep restarting with the same screen
Help please
can you post some device information.? what radio version did you install.?
it is I mate Jam with the default rom
64 MB
I can't get any info since it is not starting
try this.
follow this steps, this is my way of downgrading.
1.) download this rom http://files.pdamobiz.com/ROMs/XDA/M...11200_Ship.exe
2.) extract those files in a folder. (any folder name you like, use winrar.)
3.) run the file ROMUpgradeUt.exe
4.) download and save this file inside the folder where you extracted the files in step 1. http://files.pdamobiz.com/ROMs/XDA/M...adeUt_noID.exe after you downloaded it, run it.
5.) follow the onscreen instruction until your done flashing.
observe your device if it still have the same problem.