ok i have a major problem i was updating the radio and it stalled on 95%. SO i restarted it at the bottom with the soft reset and now my phone wont get off the three colour BL screen. i need help bad please help. I am currently using a HTC TYTN II. if anyone has any help at all i have nearly given up I have no idea what to do when i try to reflash it it wont go past 0% on the installation!
Edit/Delete Message
i met same problem before try fash e any original rom (WWE) you have
it well solve it
the radio ur trying to flash is probbly not compatible with ur device i think. try searching to radio in the upgrading section and find out which radio would work with ur device. and by the way what make is ur phone and wat carrier. as Redfilm said try using the original WWE rom, it should fix the prob.
Related
I was atempting to upgrade ROM in to the "L26 WM6 PRO Business V7 Videocall 2" ver and everything went well, but there were problem with phone calls, quality of sound during conversation exaclly, so that i was trying to update radio to 1.17 ver, and something goes wrong right now my exec don't want to turn on and he hang on the 1 splashscreen with radio ver and ver of soft,
i tryied to fixe it by downgrade rdio to 0.00 and update rom again in to the 1.15 ver included in L26 rom, but nothing has happend still the same problem
who could possibly know what had happedn with my exec, one guy on polish side said that ther is some kind of " mamaich method" to fix or check damages which I had made
Could anyone help me, I'm looking for any solution for this matter ??
Are you still able to get into bootloader?
If so, flash back your full original ROM (M$ + Radio + Ext).
hi
yes i'm still able to do it, but would u mind to give me direct link to the rom which should be installed,( one seriouse mistake it's enough for me)
Was installing duttys rom when my anti-virus program started. Update failed and since then all I see is the tri-colour screen. Sometimes I can get the rom updater to recognise my TyTNII but it will not continue to upgrade. Any suggestions. Have tried mtty1.42 but it doesn't seem to have a usb port option, have tried hard reset etc with no luck. Any suggestions would be greatly appreciated.
An update, I have tried several rom updates since, most get to the stage where the progress bar is shown and the stop. The HTC update to revert to shipped rom gets to 1% and then tells me that this rom is not suitable for my pda!
How about some more information...
What is your Tytn II - Tilt or HTC?
What Rom was on it before you tried upgrading?
What Radio was on it before you tried upgrading?
What version of Duttys did you try to flash?
Did you upgrade to HardSPL before you tried flashing?
This should enable someone to begin trying to unbrick your phone.
Also DO NOT USE MTTY unless you know what you are doing - it can seriously kill your Tytn if used incorrectly. Wait for GSLEON3 to swing by before trying this - but he's very busy at the moment helping others unbrick their toys so you may have to wait for a while.
If you had an original rom/radio from AT&T or HTC it shouldn't hurt trying to download an original rom and try to flash - preferably using your SD card.
Also, while you're waiting for someone to help, have a good read through the Kaiser Wiki (in my signature) before trying anything else.
what are the steps that u take? let us know if u are missing any
HTC TyTN 11, Was using Q-mobile 1.2 but couldn't install tom tom navigator 6, don't know what radio it was using because i hadn't got that far. Was trying to flash Dutty's 6.1 and I had run jumpspl from device because I got the white screen when I treid to run 1.93 so installed 1.56 to pda and ran it. this worked to insatll Q-mobile this morning.
Hope this helps!
what are the steps that u take? let us know if u are missing any
Try to reset pda keep getting tri-colour, attach usb and usb shows at base of screen. When i try to install rom The problem in my second post occurs. I cannot hard reset device to anything other than the tri-colour
Thanks for your help, I tried one of the roms indicated and it worked! I have spent so much time reading various wikis and downloading files. I'm not entirely sure why it worked this time but I'm not about to ask questions! Thanks again!
OK, now you've got your phone working again, make sure that you get HardSPL installed before you try anymore flashing.
ok i was installing KAIS_Radinly_0.26.07.06_CustomRUU and it froze at 96% and now my phone is bricked!! every time i restart the phone its stuck at the RED GREEN BLUE and WHITE screen.. i tried using mtty but then im not trying to mess my phone up any more. i dont understand how to fix it.. if i download a new ROM and put it on my SD card then how do i read it with my phone? sorry guys, im a noob at this as you can tell..
nm guys. i just ran the new rom and it worked! haha sorry for posting too quick!
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
xmooglex said:
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=KaiserFAQ
your answer is in there
whenever i try to ugrade my rom i get this 262 error. so then i tried to do the official wm6 rom from at&t for my att tilt but it went through the whole process of upgrading but after it said it was finished it rebooted my device and nothing changed. it was still the regular wm6 that comes on the phone. It says my ROM version is 1.62.502 and my RADIO version is 1.27.14.09. How am i supposed to upgrade and what can i upgrade to . Im trying to use hyperdragon. Please respond asap Thank you
wmontae said:
whenever i try to ugrade my rom i get this 262 error. so then i tried to do the official wm6 rom from at&t for my att tilt but it went through the whole process of upgrading but after it said it was finished it rebooted my device and nothing changed. it was still the regular wm6 that comes on the phone. It says my ROM version is 1.62.502 and my RADIO version is 1.27.14.09. How am i supposed to upgrade and what can i upgrade to . Im trying to use hyperdragon. Please respond asap Thank you
Click to expand...
Click to collapse
Read First, ask later. This problem has been asked a thousand times. Hard reset & Re-install activesync.
Moderators please close this thread!
Hi guys, my raphael was working good when stoped working the EDGE radio, it connects right on the anthem, but doesnt get signal, loosing the information with the connection timeout reason.
I think it is my radio, I have never messed with raphael HardSPL, just installed the rom 5.05.401.1 WWE official HTC rom disponible on the official HTC WEBSITE, only clicking on the file.
And I updated my radio too, installing the 1.11.25.01 version, official to the fuze, it was working so good, suddenly it broken the signal and have already passed 5 days.
I was thinking about re-installing the radio, seems that when I installed the 1.11.25.01 Radio version I didnt need to loose all my installed programs, data etc, only updating the rom, not loosing information as in the ROM installation.
I would like to re-install this rom version, or the last and best rom version with loose my data, I didnt remember the procedure, if I needed to instal the HardSPL or no, but by my remembering, only executed the .exe files on the desktop
help please!
i was needing this help so much, please help me guys, i tested my chip on another mobile and worked the edge
Be sure to flash Hard SPL before you do anything!!!!!
After you do that, you can go ahead and flash.
If I were you, I'd flash a different radio to see if it works better, I recommend .28, .32, and the .19 test.
If that doesn't work then let us know.
basmareck said:
Hi guys, my raphael was working good when stoped working the EDGE radio, it connects right on the anthem, but doesnt get signal, loosing the information with the connection timeout reason.
I think it is my radio, I have never messed with raphael HardSPL, just installed the rom 5.05.401.1 WWE official HTC rom disponible on the official HTC WEBSITE, only clicking on the file.
And I updated my radio too, installing the 1.11.25.01 version, official to the fuze, it was working so good, suddenly it broken the signal and have already passed 5 days.
I was thinking about re-installing the radio, seems that when I installed the 1.11.25.01 Radio version I didnt need to loose all my installed programs, data etc, only updating the rom, not loosing information as in the ROM installation.
I would like to re-install this rom version, or the last and best rom version with loose my data, I didnt remember the procedure, if I needed to instal the HardSPL or no, but by my remembering, only executed the .exe files on the desktop
help please!
Click to expand...
Click to collapse
I cannot say if your radio is the problem. If you're installing an official HTC or provider ROM, you do not need HardSPL. If you want to install a cooked one here off XDA, you do. This great guide will help you flash a cooked ROM and/or radio: http://forum.xda-developers.com/showthread.php?t=448008
You're right, if you flash a radio, then you will not lose anything in your Storage Memory. If you flash a ROM, you will, so be sure to back up your PIM. PPCPimBackup does a great job for that, you can find it at d0ugie's site: http://blownfuze.org/ Your contacts and calendar should come back right away after the restore, but the messages take a while to rebuild, so don't touch it for at least 15 mins after the reboot.
I was trying to flash the HardSPL, and it goes to an ERROR
Trying to flash a Radio goes to an ERROR too, my raphael is only accepting the official's HTC ROM, when flashing anything it cracks on 0%
wtf?
basmareck said:
I was trying to flash the HardSPL, and it goes to an ERROR
Trying to flash a Radio goes to an ERROR too, my raphael is only accepting the official's HTC ROM, when flashing anything it cracks on 0%
wtf?
Click to expand...
Click to collapse
By default, you cannot flash anything but an HTC or provider ROM; you cannot flash radios either. You have to flash HardSPL before you flash a custom ROM or a radio.
Have you tried running SSPLManual.exe as outlined in the guide above, step 2 note 2?
Welcome
Yesterday flashing Rom and on the 100% drop write error is thrown when the plugin is now just the first picture, and ignite it, not even vibration to start. maybe what can help reflash now rom?
We need more information!
What device do you have? A S710 or some branded version....
What ROM was on your device before you flashed?
Which ROM exactly did you try to flash?
HTC S710
ROM was original
i tray flash Shadow neo for 710+ Nsimsun-chs from here http://www.ioicn.com.cn/forum/thread-327764-1-1.html
Did you do USPL before flashing?
yes i flashed ROM several times
thanks for help i fixed my phone