Related
I cant figure it out, I just installed the latest v. WM6 Rom (http://forum.xda-developers.com/showthread.php?t=297256)
Internet Sharing via Bluetooth works but... when i start my vpn either via ssl or ipsec (on laptop) NOGO. something is in between dont know what...so workaround:
Internet sharing via USB: the device tells me "connected", the new Network connection in control panel/xp tells me "connected" but there is no Internet connection. I try to ping 192.168.0.1 which it made gateway and this is not found. nothing nada. firewall off. nogo. repair. nogo.
*argh* I realize it are 2 different problem but in short: I can not connect as I usually did under the wm5 dialer (and I miss the status lights).
Anyone has a clue?
Hi !
I have the same problem with the same ROM. I didn't found any solution yet.
I didn't try Internet connection shring with Bluetooth. But your problem sounds as a proxy setting problem on your PDA connexion. You should take a look at those settings...
Let us know if you find anything.
edit :
Finally it's working, I re-installed ActiveSync 4.5 and now it's OK.
I reinstalled activesync, modded down to wm5, then again wm6 ...
and magic usb is working but...
My VPN connection on both BlueTooth or Usb is not working. I use the AT&T client to connect to our network but authentication fails with all vpn servers in the list.
That's a shame because this is really the only basic functionality i need to check my e-mail and stuff "on the road". Hmmm... down to WM5!
Unless someone has got VPN working?
I reinstalled activesync, modded down to wm5, then again wm6 ...
and magic usb is working but...
My VPN connection on both BlueTooth or Usb is not working. I use the AT&T client to connect to our network but authentication fails with all vpn servers in the list.
That's a shame because this is really the only basic functionality i need to check my e-mail and stuff "on the road". Hmmm... down to WM5!
Unless someone has got VPN working? Heres my errorlog:
21:24:55.190 Logon request sent to VPN server 111.11.111.222...
21:24:55.190 Wait for asynchronous action to complete.
21:24:55.230 A VPN logon message 1 was received.
21:24:55.230 Accessing digital certificate...
21:25:00.818 A VPN logon message 2 was received.
21:25:00.818 Negotiating encryption keys with the VPN server (111.11.111.222)...
21:25:02.290 A VPN logon message 3 was received.
21:25:02.290 Authenticating with the VPN server (111.11.111.222)...
21:25:22.349 The VPN logon response was received.
21:25:22.349 The local address is 192.168.1.78.
21:25:22.349 Last login error set to 118.
21:25:22.349 'LogonToIPSecTunnelServer' failed.
21:25:22.349 FSM error in state 'AuthenticatingTunnel'.
21:25:22.349 !Error 118 No response from IPSEC terminator during authentication. (error 118).
21:25:22.349 ---------- Change state to 'BeforeTunneling'. ----------
ah... I have it... stupid me.
sorry. stupid. forgot the checkmark on the authentication tab on the auto-created controlpanel > networkconnections > Windows Mobile 6 Connection > Authentication.
Great!
For reference, using the Cisco VPN client, with Bluetooth and internet sharing, does not work. With WM6, a Bluetooth PAN adapter is created on the PC, and the Cisco VPN doesn't bind to this type of adapter.
Using the same config, but with the USB cable, and the wireless modem, does work.
Unfortunately It does NOT work anymore.
Whatever I try I can not get connection to the Internet
- I start "connect"
- Plugin the usb cable
- The new network connections icon appears under network connections
- It pops up it is connected
- It has an assigned 192.168.0.2
But no internet connection, ping 192.168.0.1 can not be reached, etc...
I turned off the firewall to see if this was the problem. not.
Is there ayone who has got a clue? This is really frustrating.
For what it's worth, I'm using WM6 Black 2.5 on a Hermes (Cing 8525) and I'm able to use WM6 Internet Sharing via BT to connect my laptop to the internet and I am able to use my Cisco VPN client on my laptop to connect to my company's intranet. No problems here so I don't think it's a WM6 problem.... rather a configuration problem... either on your company's VPN concentrator side or your client side.You may want to chat with your IT/Ops dept for configuration settings.
No problems here nither. I use Vista on PC. I need to connect to several networks and just have made some tests. I could reach all of them. The fact is that most of them are built on Draytek routers not Cisco, but they also use IPSec and so on.
Yep I'm having the same problem, my VPN's worked fine with WM5, but went to Black 2.5 and now when I VPN, it connects, assignes me an IP, but wont let me ping the network.
I _think_ it's becuase now the fone shows up as a network rather than a modem, and assigns me a 192.168.0.x address, and the home network is in this too... any suggestions?
share internet connection with ppc
Can i use my ppc as the wireless adapter? do i need to use "wireless modem" or "activesync" to do this? For more detail, if my computer do not have wireless adapter, and now i want to use the wireless adapter on my ppc to connect to the internet. Is it posible?
I access internet via Internet sharing with my Polaris USB connection
I found my notebook would get a NAT ip (192.168.xxxx)
How can I do to get a real IP?
http://www.whatismyip.org/
I mean I want my notebook to get the real IP not NAT
your laptop have 1 ip for each nic wifi and wired and firewire and bluetooth nic
connected and then it have the loopback adaptor
in a console on your laptop you can type ipconfig and have them listed
Sorry my poor English
All I need is to access my notebook's web site by my friends
so I want a real IP to tell my friend
I can browse other web site by using Internet sharing
but my friend can not browse my web site if I use my Polaris to the Internet
I found there was some HTC USB modem driver to use.
but it seems no use on the Polaris
You have a web-server active on your notebook and it is connected in lan at your home, and you want to view this website from internet when you are in your friend's home: it's right?
If I've understand, you must point at the public IP address of your home's internet access (you can find it in site like http://www.whatismyip.org/), but before this, you must forward the port 80 in your router to the private address of your notebook.
Hoping that he was quite clear...
P.S.: Also my English is not the greatest ...
caliu said:
I access internet via Internet sharing with my Polaris USB connection
I found my notebook would get a NAT ip (192.168.xxxx)
How can I do to get a real IP?
Click to expand...
Click to collapse
It was my understanding that with Internet Sharing on WM6, clients are placed into a DMZ and all incoming connections will go to the client.
That means that your web / ftp / etc server should work fine.
However, if your mobile provider makes you use a proxy to access the internet, then incoming connections are not possible.
I'm going to bet that this is what is happening to you, and there is nothing you can do to solve this problem.
Hi there!
Maybe I'm just too stupid, but I've benn trying for weeks now to setup the network parameters for my University's Campus network and failed miserably, so could someone please explain to me how this darn "Internet Connection Manager" works?
What I need in brief:
How can I setup a proxy to use with and only with
- HTTP(S) and FTP(S)
for a WiFi-Network that
- is NOT encrypted
- does NOT require dialing a number / accessing a modem
- does NOT use a VPN
??
Whenever I try this it always results in the connection dying completely.
In other words: When I select my standard UMTS-uplink as "default connection for programs connecting automatically" and then manually establish a WiFi-connection I can reach all computers available on the campus network get ping responses and everything, but I cannot use a proxy, hence not load off-campus pages.
When I define a new connection and enter my settings (just WiFi-name and the proxy details) I can still establish a WiFi-connection, but get a ping timeout even on the access point and the intranet servers usually available through the WiFi. No SSH login, no intranet, nothing (but I do get an IP assigned & stuff)
Here's what I would like to do in theory:
=> Manually connect to a WiFi-Network called "tuwlan".
. -open network
. -no encryption
. -IP, netmask, gateway, nameserver etc provided automatically by DHCP
=> Establish a SSH2 (SecureShell) connection to our on-campus proxy server and tunnel some ports to get through the Subnets (extremely restrictive) firewall.
. -SSH including port forwarding done with PockeTTY, works like a charm
=> Use Opera Mobile to surf web pages and FTP Sites through the proxy "localhost:40081" (which is forwarded to our campus proxy server through SSH2).
=> The Proxy only knows HTTP(S) and FTP(S), so all other programs (ICQ, Skype etc) are not to use it!
This setup used to work great with older Opera versions, but they removed the proxy setting dialog in favor of directly using the ICM settings.
So now I'm stuck with Microsofts Internet Connection Manager
Can anyone please help me to get this working?
Greetings. Sorry if my question maybe is a noob question, I don't know... I'm new of the forum...
I have a problem with my mobile phone. Recently I've bought a Motorola BackFlip, which mounts Android 1.5. I'm generally very satisfied with it, except for a very annoying thing: I can't connect to Internet via Wi-Fi.
My wireless network uses a computer connected to Internet by a USB modem; this PC, by a Wi-Fi adapter, is connected to a Wi-Fi Access Point. The other computers which use this connection use TCP/IP parameters such as:
IP Address: 192.168.0.2
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1 (which is the PC connected by the USB modem)
DNS 1: 192.168.0.1
DNS 2: ---
These are the parameters that I use with one of my computers. I tried to insert them in the phone (using, as IP Address, 192.168.0.3, or 192.168.0.5, but with the same result), and although it appears "connected to Untitled (Untitled is the name of the AP)", I obtain a very strange result: I can go on Google, access the Android Market, do searches on Google and use any other Google service (such as Images), but when I try to go on any other site - even starting from a Google Search result -, such as Facebook or Wikipedia, or when I try to use applications such as eBuddy Messenger to access MSN, I can't. It passes some time and then it appears an error such as "unable to access the page".
How can I solve this very annoying problem? I must start by saying that I can't use the DHCP with my Access Point, because I can't set automatically 192.168.0.1 as default DNS and Gateway for any computer connected: my AP doesn't have this function.
Thanks in advance. And excuse me for my bad English, if it is so: I'm a 17-years-old Italian...
how to connect
How to conect internet via proxy local
Ask Question
I had a small quarrel with my stepfather, and then he didn’t let me access the home internet. When I try to connect to our home wifi normally, it says "obtaining ip address" and loops for minutes until it says "failed to obtain ip address." But when I try to connect by setting static ip from my phone, it connects immediately but says " no internet." I assumed he might have blacklisted me, but I am unable to connect even my laptop and other phones. Suspecting that my stepfather had enabled whitelist or MAC filtering, I tried to spoof MAC address using kali linux, but I couldn't connect to the wifi with spoofed MAC. I need internet but my stepfather won't listen to me. Since he is not in home right now and won't return for a month, I don't have a connected device to access the setup page and see the settings of our Digicom ( DG-M342T) router. I am also unable to physically access the router but I have the password( Authentication type - WEP). How do I fix this? I would really appreciate your help.
You could download the router's management app and then view the connected devices list on your phone. Check your router's setup guide to see which app you need to download.
jwoegerbauer said:
You could download the router's management app and then view the connected devices list on your phone. Check your router's setup guide to see which app you need to download.
Click to expand...
Click to collapse
I can't access the setup page by typing 192.168.10.1 in the url or from other Router management apps on the play store. It says " Can't reach the page." I also checked the guide where it says to open admin page by typing 192.168.10.1 on the browser , but there is no mention of any management apps.
Making changes to your router you’d need to know the IP address of the router. A list of wellknown router IPs here:
How to Find Your Router IP Address in 3 Steps | ExpressVPN
Learn what an IP address is, the differences between a local and public IP address, and how to find your router’s IP on Windows and Mac.
www.expressvpn.com
jwoegerbauer said:
Making changes to your router you’d need to know the IP address of the router. A list of wellknown router IPs here:
How to Find Your Router IP Address in 3 Steps | ExpressVPN
Learn what an IP address is, the differences between a local and public IP address, and how to find your router’s IP on Windows and Mac.
www.expressvpn.com
Click to expand...
Click to collapse
Thanks for your reply jwoegerbauer. As I mentioned earlier in my post, if I connect to wifi just by typing password, it loops "obtaining ip address" for long period, and therefore I have to set static ip address through the advance setting of wifi just to connect to it. My router's local ip address is 192.168.10.1 . I used to access the admin page before the restriction through this ip address. But now it says "Can't reach the page." The problem is about not being able to access internet and admin page after connecting to the router.
Clear your local DNS cache to make sure you have the recent version from your ISP for 192.168.10.1. For Windows machine, you can do this by going to Start > Command Prompt > Type ipconfig /flushdns and then hit Enter.
Assumed that router's IP really is 192.168.10.1 and it still doesn't work then maybe ISP is blocking it. You may try to use an alternate DNS service such as Cloudflare for example.
I flushed the dns in windows. Now I can connect to the wifi without setting statip ip (in windows), but I still can't access internet. If I try to open any website, it says "
Hmmm… can't reach this page" and then says "You are not connected." I installed cloudflare WARP in windows but it was no use , since it requires internet access to function.
These are the screenshots of my android to explain what exactly happens:
1. When I try to connect to wifi just by typing it's password (loops at "obtaining ip address")
2. Setting the static ip manually
3. Instantly connected after setting static ip
4. Connected but No internet
5. Can't access router setup page
Cloudflare Warp? Confused.
How to change DNS Server to Cloudflare is explained in detail here:
How To Change DNS To 1.1.1.1 [ CloudFlare ] In Windows 10 Laptop And PC Full Tutorial - TECHWIBE
Are you having a slow Internet speed and websites are taking too long to load with your Window 10 OS (laptop or PC). Then this guide will definitely help you
www.techwibe.com
I downloaded an application( Cloudflare WARP) form the cloudflare website linked below. I checked the website you linked and changed the DNS accordingly, but I still can't access internet. My android phone is not even connecting without static ip and I am tired of manually setting it and not being able to use internet.
Windows · Cloudflare WARP client docs
The Cloudflare WARP client allows individuals or organizations to have a faster, more secure and private experience online.
developers.cloudflare.com
No further ideas on my part.
jwoegerbauer said:
No further ideas on my part.
Click to expand...
Click to collapse
Well thanks for your help jwoegerbauer. Below is the screenshot of ipconfig command after flushing dns. It looks like I haven't been assigned an ip address, the subnet is different, and the gateway is blank. Do you have any idea what this means? What could be a valid ip adress to connect manually with static ip?