Related
I am looking to replace the upper icons in WM 6.0 with custom ones, the question is are they in the rom (if so cannot edit, right?) or are they in wm somewhere?
I've been slowly going through the system and have not found them yet, any suggestions on where to start?
I have some fantabulous advice on where to start my American amigo.
FIrst, the files SHOULD be editable, they are simply image files under the \Windows directory. I'm pretty sure they all have different names and are not grouped together, but they should be easy to spot (I imagine they will end in a picture format extension IE .bmp .gif etc.
BUT, it is important to note that, like most Windows Operating Systems, the OS doesn't trust you. Therefore, the files are hidden!
If you just have the normal Explorer, I don't know if it has an "unhide system files" choice.
I personally would go download and install Total Commander, Resco Explorer etc, one of which does have that choice.
After that, search that folder and you will find them.
PS I am not rambling, I have actually seen them in there
Cheers!
Thank you for the good start.
I had a feeling they had to be in the \windows\ or \windows\system folder.
Now the auduous task of finding, editing and replacing them, I always hated this part, since my patients is minimal at best.
Thanks again for the quick tip, I'll try to post a screenshot when I get them done.
1xrtt.bmp
1xRTT_sync_PPC.bmp
1xRTT_connect_PPC.bmp
3G.bmp
3G_connect_PPC.bmp
3G_sync_PPC.bmp
battery.bmp
battery_alert.bmp
batteryCharging.bmp
batteryNone.bmp
bluetooth.bmp
callonhold.bmp
datacall.bmp
dataconnection.2bp
EDGE.bmp
EDGE_connect_PPC.bmp
EDGE_sync_PPC.bmp
EVDO.bmp
EVDO_connect_PPC.bmp
EVDO_sync_PPC.bmp
gprs.bmp
gprs_connect.bmp
gprs_sync_PPC.bmp
gprs_connectPPC.bmp
input_kboard.bmp
missedcall.bmp
MissingSIM.bmp
newemailsms.bmp
newIM.bmp
No_Signal.bmp
pen.2bp
radio_lost_signal.bmp
radio_no_service.bmp
radioconnected.bmp
radioOff.bmp
ringerOff.bmp
roaming.bmp
signal.bmp
syncherror.bmp
sysvol.bmp
voicecall.bmp
VOiceCall_icon.bmp
voicemail.bmp
volume.bmp
WiFi_datacall.bmp
WIFI_on.bmp
Wirelessonoff.2bp
NOTE: 90% of these are the logos for the top bar. One or two relate to the input logo at the bottom bar (IE Keyboard and Pen, I believe it is the Input_Kboard and Pen files). One or two others relate to the image you see when you click the sound icon in the top bar and it gives you two sound parameters to adjust, each with a logo at the top. Use your judgement and eyes to decide which is which. Most you will have seen already.
I don't know if this list is complete, I may have missed some. If you find any others in your searches, let us know and I will add them to this list. I needed to make this list anyway as I am trying to cook a ROM for Himalaya and need to know what I can remove. (For example, Himalaya's don't have EDGE or 3G, so straight away there are eight or so logos that can be removed).
Also note that other programs have access to the top bar and may add their own icons, as Messenger (which does not come installed in our roms) did. Perhaps it is only Microsoft programs that can add their own icons, who knows.
PS Good luck, look forward to the screen shots.
PPS Some of the logos I have never seen appear, but I have been in situations where they should appear (IE No SIM card, but the NoSim image never appeared). I find it interesting that while half follow a naming convention, others don't (IE 1xRTT_connect_PPC.bmp and gprs_connect.bmp without the _PPC). I wonder if this has anything to do with it not working.
(Rant over)
Were you ever able to change the battery icons? I was trying the same bmps but they do not change even with a soft reset for me, even tho the file is changed in the directory to my customed one it still remains as the default. Any tips tricks or ideas? My thought is a dll but I'm relatively new to this and am very unsure. Thanks for the tips and hope to hear you have done it or at least figured out a possible way.
I can help you to find the icons
There are include as ressource in DLL and we can replace it
The only icon I can find is the Signal Strength Icon
Any idea ? Do you replace it ?
Sebastien
Hi i am new here, just got my kaiser and i wanted to customize my splash screen because i flashed a ROM. It took me like 2 days to search through this forum and did everything. I have to say that the information is quite scattered. i am sure a lot of the new guys will have the same problems.
So I decide to contribute my first post to the newbies like me.
BTW i use vista ultimate 64bit, windows mobile center. which seem like there are a lot of compatibility issues.
Okay, so first Boot Screen, Splash Animation and Splash Screen are 3 different things. the order come to the screen is : boot screen (default as "smart mobility" for HTC), then splash animation (default is animation for HTC or operator), then splash screen (default is windows mobile x.x)
Lets work backwards,
Splash Screen
Fairly easy, the image is in \windows\welcomehead.96.png, this folder is not visible on the phone browser on my computer but i can see it with my file explorer on the phone. I made a png and cut then paste it. then i found out the file cannot be replaced somehow (depends on ROM?).
so i looked around, it seems like there are 2 solutions: resco explorer or edit the registry, I have a registry editor so i picked that solution. first i changed my image name to welcome2008.png and uploaded to \windows\ . Then Edit \HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\SPLASH SCREEN there are 2 image urls, not sure the difference, but i changed both to \windows\welcome2008.png,
soft reset! wala!!
Splash Animation
Took me a while. the animation is in \windows\animated.gif so I made a gif with flash. but the frame rate seems not right. then i realized the IE is bad in displaying gifs, it looks fine in firefox.
I uploaded to the the phone, cut and paste to \windows\, cannot be replaced the original file again. so i change the file name to animated2.gif, Edit \HKEY_LOCAL_MACHINE\HTC\STARTUPANIAMATION change the giffile to "\windows\animated2.gif"
soft reset! bingo!!
later on i also changed another field there called WavFile, so my startup has sound too... SO COOL!
more animation here:
http://forum.xda-developers.com/showthread.php?t=336174
http://forum.xda-developers.com/showthread.php?t=414418&highlight=splash
Boot Screen
Took me the longest, first look through:
http://forum.xda-developers.com/showthread.php?t=334907&highlight=kaiser+splash
Download SplashTool, nb_image_converter, customRUU, and htc rom tool.
follow the instruction, i made a bmp and converted it into a nice splash.nb. ran the HTC rom tool, ERROR
error: File "htcrt.info" is CORRPTED. This is the license policy violation! Halting
checked the forum, seems like a lot of people have problem with HTC Rom Tool. so i flipped through google and somehow found this NBHUtil on this forum that also make rom. i attached it in this post.
run NBHUtil, choose Kaiser as device, pick splash.nb in Splash file, LEAVE EVERYTHING ELSE DEFAULT... Build NBH. yay, finally got a splash.nbh,
now what??
Change the nbh name to "ruu_signed.nbh", run CustomRUU, similar steps as you are flashing the ROM
some nervous selections, a bit scared to turn my phone into a brick. but...
IT WORKED !!!
anyhow, hope this post can help some of the newbies.
junkmantis said:
Hi i am new here, just got my kaiser and i wanted to customize my splash screen because i flashed a ROM. It took me like 2 days to search through this forum and did everything. I have to say that the information is quite scattered. i am sure a lot of the new guys will have the same problems.
You maybe are not using the search tools correctly there is a little thing called XDA-WiKi go there and there is all the information you will need. I could give you the link but then you won't learn how to find anything and tomorrow you'll be back asking someone how to change your boot sound. You know you can search GOOGLE and they will bring right back to XDA for what your looking for. You say you been looking for 2 days then your not digging in the right place or using the right tool. It took me 10 key strokes to get what your asking for. So I hope you take my advice you have set yourself up for a flame here by asking this kind of question. I have tried to help you but don't be surprised if you get flamed!
Click to expand...
Click to collapse
edbutler said:
You maybe are not using the search tools correctly there is a little thing called XDA-WiKi go there and there is all the information you will need. I could give you the link but then you won't learn how to find anything and tomorrow you'll be back asking someone how to change your boot sound. You know you can search GOOGLE and they will bring right back to XDA for what your looking for. You say you been looking for 2 days then your not digging in the right place or using the right tool. It took me 10 key strokes to get what your asking for. So I hope you take my advice you have set yourself up for a flame here by asking this kind of question. I have tried to help you but don't be surprised if you get flamed!
Click to expand...
Click to collapse
you mean like this:
http://wiki.xda-developers.com/index.php?auto_redirect=1&pagename=TitleSearch&s=splash
http://wiki.xda-developers.com/index.php?auto_redirect=1&pagename=TitleSearch&s=boot+screen
http://wiki.xda-developers.com/index.php?auto_redirect=1&pagename=TitleSearch&s=kaiser+splash
http://wiki.xda-developers.com/index.php?pagename=FullTextSearch&s=customize+splash
Thanks for your summary of this scattered information!
no problem
thanks junkmantis, i changed my animation. but when i tried to add the sound, i just got a really sharp noise instead of my sound effect. what did i do wrong?
Cheers dude, new here too and it's a;ways nice to read a 'summary' post.
still cannot get my splash sound to work, anyone knows the problem??
thanks in advance!!
Great post. Quick correction: the registry entry for the splash screen should be corrected
From:
\HKEY_LOCAL_MACHINE\MICROSOFT\SPLASH SCREEN
\HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\SPLASH SCREEN
thanks peterfnet for the correction,
kaiserbb001, i am not sure, maybe something to do with the wav format?? anyone else knows?
Use schap's new Advanced Config 3.0 and check to see if animation is enabled. Also, the .wav file must be in \Windows. You can also use Schap's Advanced Config 3.0 to browse and choose the .wav file that you want to use.
Did all of this great the only problem I have is that my initial boot screen shows and then it stays on there until windows loads so its not showing welcomehead at all anymore, same goes for if I turn the animated splash on it will just show where the animation stopped until windows loads and totally bypasses the welcomehead.
Hope this will get you in the right direction!!
http://tinyurl.com/bzz44r
lol I have been searching this site using the search function as well as the wikis nothing so far has worked thanks for the help tho
Hello,
so I want to change my SplashAnimation. You say that I must change the RegistryEntry because the animated.gif is Read-Only.
But I cant find \HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\SPLASH SCREEN
Do you have an other idea how I will be find the entry? Or do you have an idea how i can delete the Tick to ReadOnly?
Thx 4 Help
PS: Sorry, my english is very bad, im twelve and from germany
kaiserbb001 said:
thanks junkmantis, i changed my animation. but when i tried to add the sound, i just got a really sharp noise instead of my sound effect. what did i do wrong?
Click to expand...
Click to collapse
I've had my start wav sound do the same as yours ... and a "chipmunk" type fast sound play. I'm assuming the bitrate of my files isn't correct and I don't seem to be able to find the precise settings to create a wav to have it play properly. Can anyone supply this info please?
If this is the wrong section, let me know please.
I see a lot of themes or people SS's of their home screen and, the Start button at the top, i see a lot of people have custom names there, like in Laskar's theme and etc. i was wondering how it's possible to put a custom name there... Like... Susa instead of Start, or something along those lines
i would also like to see this possible
Well, i still don't know how to do it, but the new co0kies 1.7 has an option for it now, so all's well
Susasama said:
Well, i still don't know how to do it, but the new co0kies 1.7 has an option for it now, so all's well
Click to expand...
Click to collapse
I thought it was only your service provider details that CHT would change, not the txt next to the start button?
I'm still after customizing the start txt if any one can help...
There's two ways that I know of..........
Either look here. Needs a bit of knowledge to do that, tried a few times but couldn't get the dll to re-sign correctly and gave up in the end.
Or.......the cheating option which I use.
Install the "No Start" patch attached (WWE only), no idea who wrote it originally so can't credit them, but it came off here somewhere.
Then in Photoshop add whatever you want to replace it with, this has the advantage that you can use whatever font/image/colour you want rather than just sticking to white text in your system font if you do it the proper way.
To align in Photoshop, take a screenshot to show your start icon with no text, then overlay it with some transparency onto your new wallpaper then you can see perfectly where you need to paste your new text/icon or whatever.
Hope this helps.
sniper-wolf said:
There's two ways that I know of..........
Either look here. Needs a bit of knowledge to do that, tried a few times but couldn't get the dll to re-sign correctly and gave up in the end.
Or.......the cheating option which I use.
Install the "No Start" patch attached (WWE only), no idea who wrote it originally so can't credit them, but it came off here somewhere.
Then in Photoshop add whatever you want to replace it with, this has the advantage that you can use whatever font/image/colour you want rather than just sticking to white text in your system font if you do it the proper way.
To align in Photoshop, take a screenshot to show your start icon with no text, then overlay it with some transparency onto your new wallpaper then you can see perfectly where you need to paste your new text/icon or whatever.
Hope this helps.
Click to expand...
Click to collapse
Thanks! Sneaky, but I like it! Will give it a go!
Must admit, I'm a bit surprised no one has come up with a editor yet
I'm working on a complete AOSP taskbar, however I'm having trouble with one pesky little icon (see attached). If I'm correct, then that's where the location icon should be, however for some reason it's giving me the roaming icon. Now, I'm not roaming for one thing, and for another, I have the correct .pngs in the file (sym_gpsone_[0,3]_[sprint,vzw].png in com.htc.resources.apk) but it doesn't want to use those.
Am I editing the wrong icons? Or is there another hack necessary to get it to use the correct ones?
Thanks.
What are the names of your gps icons in com.htc.resources.apk? Should be sym_gpsone_0_sprint.png and sym_gpsone_3_sprint.png. Make certain...If you can, zip up your com.htc.resources.apk and i'll take a look...
Gregalous said:
Am I editing the wrong icons? Or is there another hack necessary to get it to use the correct ones?
Thanks.
Click to expand...
Click to collapse
If you're positive that you know you're editing the correct .png file and that you aren't roaming, then next logical problem would be in the .xml programming of the taskbar...but I highly doubt many of actually mess with the code inside the .xml files.
Double check the icon and your network settings.
Take a look for yourself. It's sym_gpsone_0_sprint.png and sym_gpsone_3_sprint.png.
Gregalous said:
Am I editing the wrong icons? Or is there another hack necessary to get it to use the correct ones?
Thanks.
Click to expand...
Click to collapse
What ROM is this for? And where did you get the services.jar for it? I only ask because the same thing happened to me when I was puttin some **** together and used a .jar for Legend on Sprint(or the other way around I dont remember). Anyways, it looked exactly like that. So, you might want to check that first...
My ROM that I'll be releasing soon has, I think, all of the icons changed to their AOSP counterparts. (might be missing mail, since I don't use that apk) The headphone icons I had to derive from the black versions, but I think they look very good. (I couldn't find aosp icons for headphones??) I don't have the rest of the ROM exactly how I'd like it yet, so I'm not posting it yet... but if you'd like to look at (or steal) what I've got, you're welcome to, just send me a PM and I'll link you to it. It's highly based on the Gomorrahs Green Hero One theme, and he had most of them already fixed.
I'd also like to add that I've got the notification panel AOSP themed too, minus the carrier text color.
gomorrah said:
What ROM is this for? And where did you get the services.jar for it? I only ask because the same thing happened to me when I was puttin some **** together and used a .jar for Legend on Sprint(or the other way around I dont remember). Anyways, it looked exactly like that. So, you might want to check that first...
Click to expand...
Click to collapse
Good point, I snagged the services.jar from one of the posts in the themes thread, I think it was for one of the earlier Fresh ROM's...
I'll try a different one and see if I get different results. Thanks for pointing that out!
Hello,
I wonder if anyone is able to/wants to help me?
I am looking for confirmation of the manila file names for CHT 1.8... (I have been browsing the forum but can only find cabs and not the file names for this)
I have been looking through the files by using cfc-gui but I can’t confidently identify the right files!!
I just want to personalise my own files, initially to achieve a transparent home screen, but ongoing to something else.
The clock files are identified on the CHT thread, but not the bars/panels.
I think I have identified the following files (for not-pressed bars), but on modifying them and loading them onto the phone (in the Windows folder, and then restarting manila, and also soft resetting) they don’t all seem to change as I expected.
These ones do work:
0B7F6995_manila = appointment expand/pull-down grip
30D807DA_manila = thin bar with rounded corners to ‘finish’ lower appointment
0d61c97c_manila = date bar
740dc76b_manila = alarm bar
These ones don’t work:
43A0289_manila = appointment list bar
77BAF4F0_manila = notifications full bar
(if these aren’t what I think they are, then what have I changed by modding these files??!!)
I can see from various mods on this forum that people are able to change the files I want to work with, so I must just be playing with the wrong files.
Any help would be good, and it’ll save me time by further searching many pages of the forum and struggling to identify the files in the Windows folder (which is proving very difficult it seems).
Thank you.
it would be good if there was a manila library on here somewhere - cfc-gui is a really good tool, but it's just not doing a proper job for me on this occasion!!!
PS: I have current version 1.66 standard UK ROM on HD2, non-network specific. My CHT 1.8 is working fine, no issues, I just want to mod it a bit!
Agree with the above would be good if there was a list available as took me ages just to find the default cover art for music and couldn't find the mini music player background. I'm using cfc-gui as well and there's as many/if not more files under unknown as there are with headers which makes it really difficult. I've just been going through them 1 by 1 and I'm going to try edit a few on the weekend so will let you know what I find.
Cheers - any help on this would be appreciated. There are loads of mods for this already, but not many sharing info!!
I'll keep on looking...
In the meantime, if anyone else can assist - much appreciated it will be!
If anyone is interested, I found what I was looking for:
10376502_manila = notifications bar
438A0283_manila = appointments bar
I've attached all of these files as transparent in the .zip below. The only one that isn't fully transparent is the pull-down grip which I have added little grip dots to it so you know where it is, otherwise transparent.
** Back-up original files from the Windows folder before overwriting! **
the clock white background remains white, Any updates of others ?
nice work, i liked it, when ever I flash a new rom I was installing transparencies.. not anymore...
I hope you keep up with this threat...
can you show a picture of this please!!
many people will be much help if you put screenshot..if you ask someone's help try to help someone also and someone will apreciate yours
Has anyone asked Co0kieMonster?
johncmolyneux said:
Has anyone asked Co0kieMonster?
Click to expand...
Click to collapse
no one i assume...
why dont you share these info with them ...
Is something being requested in the posts above?
I can't quite work out what it is - is it a transparent clock? - if so, which sort?
Aren't there plenty of clocks for CHT on XDA already, do they not work?
AvRS said:
Agree with the above would be good if there was a list available as took me ages just to find the default cover art for music and couldn't find the mini music player background..
Click to expand...
Click to collapse
I've been looking for the music player manila files too.. Did you have any joy finding the music player background.. would be interested in this if anyone can help?
skilty said:
I've been looking for the music player manila files too.. Did you have any joy finding the music player background.. would be interested in this if anyone can help?
Click to expand...
Click to collapse
No didn't find them but I'm going to look at the files in a cab I used to change the music player when I get a chance this weekend and will let you know.
nniicckkss said:
If anyone is interested, I found what I was looking for:
10376502_manila = notifications bar
438A0283_manila = appointments bar
I've attached all of these files as transparent in the .zip below. The only one that isn't fully transparent is the pull-down grip which I have added little grip dots to it so you know where it is, otherwise transparent.
** Back-up original files from the Windows folder before overwriting! **
Click to expand...
Click to collapse
could someone post the original manila files please, as i`d like to revert back but didnt know how to back them up.. Thanks
**** turpin said:
could someone post the original manila files please, as i`d like to revert back but didnt know how to back them up.. Thanks
Click to expand...
Click to collapse
cmon guys you dont want ole **** turps to have to hard reset do you??? lol
Would like to help...
**** turpin said:
cmon guys you dont want ole **** turps to have to hard reset do you??? lol
Click to expand...
Click to collapse
u
I would like to help but I am using Dusk ROM with Cookie cooked in to it and skinned by G10 so I think they are not the ones you want.
Also a hard reset is always a good reason to try another ROM
Regards,
Rainbow86
**** turpin said:
cmon guys you dont want ole **** turps to have to hard reset do you??? lol
Click to expand...
Click to collapse
Depending on which files you edited..... you might be able to get them back by installing/uninstalling/reinstalling CHT..... maybe.....
Which particular files do you need...??
if by chance I have them backed up Ill post them for you... I dont have that many though....
There is a link in the FAQ section of the CHT thread's main post from Co0kie, for transparencies and some graphics restore cabs.
That should help answer some of your questions.
If you have any other questions still after looking at those cabs and files, let me know.
You can go directly to that thread to the first post where the link is, by clicking the CHT banner in my sig., or clicking the link above will take you there directly.
thanks for the responce guys! i'm actually not sure what manilla files they are lol, i just know there the ones which make the calendar and call history transparent. i've tried re-installing CHT but transparency is still there, it wasnt a cab see. i overwritten the original files with zip file on page one. but would like the glass panel look which dinik created. installing dinik theme the transparent calendar/call history is still there. someone who backed up the manila files before installing that zip file could help... were are they!! lol
**** turpin said:
thanks for the responce guys! i'm actually not sure what manilla files they are lol, i just know there the ones which make the calendar and call history transparent. i've tried re-installing CHT but transparency is still there, it wasnt a cab see. i overwritten the original files with zip file on page one. but would like the glass panel look which dinik created. installing dinik theme the transparent calendar/call history is still there. someone who backed up the manila files before installing that zip file could help... were are they!! lol
Click to expand...
Click to collapse
I have attached the original files that you highlighted a couple of posts above...
in the zip file are the original files if you want to drop them in manually, or a cab file for if you want to do it the easy way - all it does is place the two manila files in the windows folder, and it's not going to appear in the applications list either (you can't 'uninstall it'), its a one-way cab.
Thanks for all your help guys but looks like its not to be. they were the right manila files but after getting rid of the transparency`s and installing diniks theme everything has the glass panels but calender/call history. maybe the rom i`m using is affecting the theme (cleanex rom). but again thanks for your help guys.