Database Info

How good is the Sleeve case included in Nexus one package?

Hi,
Can someone post some high resolution photos from Nexus one sleeve included in the package?
How good is the sleeve and whether it protects the phone in case it hit the desk or when it is in our jeans pocket?
Thanks

I dropped mine on a hard floor from about 4 feet. The sleeve saved it but it still sounded scary. I'm still waiting for my silicone case to arrive.
The sleeve is nothing special. It's neoprene, perhaps 5mm.

legolas.w said:
Hi,
Can someone post some high resolution photos from Nexus one sleeve included in the package?
How good is the sleeve and whether it protects the phone in case it hit the desk or when it is in our jeans pocket?
Thanks
Click to expand...
Click to collapse
I can say that it works very well as far as protecting your phone. I have a N1, but my cousin was trying to see if her Sprint Hero could fit in the sleeve and just when she put it in the sleeve, it fell on the floor. We slid it back out of the sleeve and apart from the battery door popping off, and we snapped it back on, all was well.

I have been using it and it seems to work well enough. It is slim and has the cute android on one side. I'm going to put the Zagg body protector when it comes out in conjunction with the sleeve.

Thank you all for the replay. I think I will stay with Clear-coat screen protector and the sleeve. but can anyone please post a photo of the sleeve ?
specially when the cell phone is inside the sleeve. I want to know whether the sleeve fully covers the phone or the phone is taller than the sleeve.
Thanks

It's actually a pretty good quality case. I would compare it to the one which came with the G1, just different material.
Here is a pic I took with the N1 camera
http://picasaweb.google.com/lh/phot...authkey=Gv1sRgCOPl_qzZ0pyR1wE&feat=directlink

It's like the Body Glove mobile phone cases... Nice and compact..
I took a quick video clip of around the case and a frame grab here showing the depth of the phone in the case
http://tinypic.com/player.php?v=4so9ib&s=6

SystmDcln said:
It's actually a pretty good quality case. I would compare it to the one which came with the G1, just different material.
Here is a pic I took with the N1 camera
http://picasaweb.google.com/lh/phot...authkey=Gv1sRgCOPl_qzZ0pyR1wE&feat=directlink
Click to expand...
Click to collapse
Hey, that's a really nice case! Thanks for the pic!

I like the little Android on it. I wish Google would make an actual case to carry on your hip with that on it.

Bicster_ said:
I dropped mine on a hard floor from about 4 feet. The sleeve saved it but it still sounded scary. I'm still waiting for my silicone case to arrive.
The sleeve is nothing special. It's neoprene, perhaps 5mm.
Click to expand...
Click to collapse
The same thing happened to me. i dropped mine but it wasnt 4 feet and the phone came out alright. like you said it was scary.

The case is nice, it is slim and cushy. That said I don't think it will protect it from serious falls. If you are careful its nice, it slips in and out easily and doesn't add much width of it at all.
I will be looking into other things as well...that you don't need to remove in order to use the phone but we will see. I hate adding width to the phone at all

The sleeve is just OK for now, until better protective cases hit the market!

Thanks everyone for sharing the pictures and your thought.

SystmDcln said:
It's actually a pretty good quality case. I would compare it to the one which came with the G1, just different material.
Here is a pic I took with the N1 camera
http://picasaweb.google.com/lh/phot...authkey=Gv1sRgCOPl_qzZ0pyR1wE&feat=directlink
Click to expand...
Click to collapse
Thank you for the photo,
is this taken with the Nexus one highest camera resolution?

NPS_CA said:
It's like the Body Glove mobile phone cases... Nice and compact..
I took a quick video clip of around the case and a frame grab here showing the depth of the phone in the case
http://tinypic.com/player.php?v=4so9ib&s=6
Click to expand...
Click to collapse
The video is amazing, thanks for sharing it.
I am waiting for my N1 . Hope it arrive soon :d

does a decent job of wiping the screen off as you push it in and pull it out if you put some pressure on the front

milkham said:
does a decent job of wiping the screen off as you push it in and pull it out if you put some pressure on the front
Click to expand...
Click to collapse
this is what i like most about it

I think the sleeve does it's job, however I cannot hear my phone calls very well when it's in the sleeve, and if your trying to answer a call when you do actually hear it you have to hustle to remove it from your pocket and try to get it out of the sleeve to answer the call. It's tricky. I cannot wait for the 2 docking stations that are coming out at the end of the month. One for the desktop and one for the car. Both will use the little gold contacts on the bottom of the phone. So you do not have to use a docking station with a damn micro usb sticking out of the docking station, you will be able to just set your phone onto these stations, and it will charge without connecting anything.

tommyarmour said:
I cannot wait for the 2 docking stations that are coming out at the end of the month.
Click to expand...
Click to collapse
Eh, who said anything about them coming out at the end of the month? They haven't been announced at all, much less given release dates. We only know about them because they passed through the FCC.

From my past experiences ...
... Just wanted to share this: I have had several similar sleeves that came with phones I have had in the past and here are common problems I have found with them:
(1) Most of them use glue in addition to stitching in their construction. After months of use (and possibly from body heat if commonly stored in pocket), the glue starts to marr the phone
(2) Most of them have nice soft OUTER finishes but not so on the inside. This is true for the N1 sleeve too. Feel the roughness of the edges and sides on the inside ... not sure anyone would really want their phone sliding up and down on that especially if the sleeve is snug.
(3) Most of them tend to double as screen cleaners if used a certain way (either on the inside or using the outside), but end up leaving surface scratches in the long run.
(4) Even the best of screen protectors tend to affect the screen resolution and/or viewing angle even if just slightly.
Granted that these experiences ranged over several manufacturers (Sony Ericcson P series, HTC, etc) and several skins/screen protectors, but I have now built up my knee-jerk reaction of a shudder everytime I think of a sleeve or a screen protector .... of course, thats just me
Just my two cents ....
On a side note, I am in search for a vertical flip style ("book style") for my N1.
I guess my logic is this: protect when not in use, but let me have the best resolution when IN use ... in case anyone knows of a good one, please let me know?
Thanks!

Original HTC leather case/pouch PO S520 review [11 may]

Hi guys,
I have just bought the PO S520 case for my Desire. What can I say? First impression - a nice case with a sleek minimalistic design.
The leather quality is good, you can actually smell that it's real leather (not the faux leather as sold plenty at eBay). The leather is quite soft, you can bend the case very easily if you want to. There are also two.. erm.. "hardening plates" inside the case itself that hold its shape so that it does not feel too soft just like a piece of leather. The "plates" are quite soft as well, apparently made from thin plastic or hard paper. Those are nothing that you can actually see, as they are "sewed in" into the front and rear part of the case. I hope you understand what I mean.
The ex-Blackberry owners having those super-hard-leather-cases that feel like leather but are hard as a rock - no, the PO S520 is not like one of these.
The inner lining is made of some kind of a soft polyester fabric (the one you meet quite often on the inner part of skiing winter gloves, for example). The quality seems to be ok at a first glance.
The phone fits nicely in the case, no parts are sticking out.
The pouch felt a bit tight for the Desire at the first time, (specially the lower part) So i tried to see how stretchable it is. On my way from Tottenham Court Rd to South Kensington (20 mins roughly) I was trying to stretch it with a mock-up Desire (the one they use at stores for display purposes) inserting it slightly angled, holding the pouch a bit skewed etc. When I arrived to work the pouch already felt much more comfortable. So, the verdict is ==> Yes, it does stretch.
As for the pull-out strip. I was very worried about this one as it actually wraps around the whole lower part of your phone when it's inside the pouch. And, of course, when you pull your phone out, it experiences a lot of friction. I was afraid of the phone's soft-touch coating to disappear with time. Looking more carefully has shown that HTC has at least thought about this thing and has made the "inner" side of the strip (the one that faces your phone when inserted) a bit more silky and glossy that might *cough* help the soft-touchiness to live a bit longer.
One pleasant thing to notice was a small magnet inside the end of the pull-out strip. Thus the end does not flutter around but sits tight attached to the case at all times.
A bit less pleasant thing to notice were the inner stitches. On one of the pics showing the inside of the pouch you see two black stitches on the inner-backside. Those are not very flush and may leave "soft-scratches" on the backside of your Desire, so be careful or ask your mum for a solution, she definitely knows how to handle the stitches I personally do not think that this is a real issue as the stitches are nothing "hard" or "sharp".
Right now I have used the pouch for some 90 minutes. Will keep playing with it for the rest of the day and will update the review if needed.
If you have anything to add - don't be shy
Cheers.

Thanks much for your review, very detailed. But could I ask where did u get this case? I thought its due for release on 15th..0.0''

http://www.inkino.co.uk/zen/index.php?main_page=product_info&cPath=68_40_491&products_id=3801
I have visited their store this morning as I did not want to wait for delivery

Ordered, everywhere else has this down as July delivery so getting it now! Looks good

SuperEtrader have it in stock now, received email from them. £10 including delivery cheapest I can find it.
http://www.superetrader.co.uk/htc-desire-official-pouch-case-po-s520-p-11955.html

blackfox888 said:
SuperEtrader have it in stock now, received email from them. £10 including delivery cheapest I can find it.
http://www.superetrader.co.uk/htc-desire-official-pouch-case-po-s520-p-11955.html
Click to expand...
Click to collapse
Thanks for this. All I need now is 1 more battery and Im done...

D'oh! Should've looked for it cheaper - ah well, only a fiver!

I ordered one and its been already dispatched from KingofGadgets.(can ne ordered at amazon.co.uk)

Received mine this am, very good quality, looks the part but wow! is it a tight fit I'm glad I was sitting on my couch when I tried it the first few times as I dropped the phone 2 or 3 times as I was trying to push the phone into the pouch, I imagine it will ease up over time but I would be careful when using it initially.
Dont forget to insure your phone.

Thanks for the review, have one on the way...

Thanks for writing this, I am looking alot at cases atm and this one is definitely a contender for 2 reasons, A being an original case and B it's quite cheap, and C (I know 3 reasons ) its simplistic in it's appearance but seems functional.
I would really like some more pictures of the phone fully inserted though. Despite that it appearently is a tight fit when you first receive it, I kinda wonder how big it is/makes the phone.
// Cole

HD2 one was just as tight, got loose as you use it so not worried about that - phone is insured though

When inserted, the phone is not "bigger" at all. The space it takes in pocket is almost the same - that was one of the reasons I bought it.
As for tightness - I did the following trick: I have wrapped my Desire's lower part in paper (took a half A4) to make it thicker. Then pressed the phone in (was not that hard, had no worries to damage the phone or case). Waited for some minutes, pulled the phone out. Voila! Now it fits perfectly - not too tight, not too loose.
As for the stitches - does anyone else experience this? Try pulling your Desire out so that the phone's backside rubs them slightly - do you see any marks? (yes, I know I am being waaaay too perky here, but still )

Sounds good, I've settled for the pictures you posted earlier (which looked quite good I might add), and ordered my own pouch from mobilefun.co.uk (quite low shipping cost of about 4£ within EU, very good).
// Cole

blackfox888 said:
SuperEtrader have it in stock now, received email from them. £10 including delivery cheapest I can find it.
Click to expand...
Click to collapse
thanks, I ordered few days back, got it today,its perfect fit.

temka said:
As for the stitches - does anyone else experience this? Try pulling your Desire out so that the phone's backside rubs them slightly - do you see any marks? (yes, I know I am being waaaay too perky here, but still )
Click to expand...
Click to collapse
My case just arrived and I must say I concern about the scratch on the backside as well

LPT said:
My case just arrived and I must say I concern about the scratch on the backside as well
Click to expand...
Click to collapse
I have tried to solve it by "polishing" the inner side of the case. I have a mock-up Desire (used for display ppses in stores) and i was simply pulling it in- and out of the case, pressing slightly harder on the back side, trying to "rub the stitches away". Two things I have noticed:
- the stitches did get "polished" and do not scratch the phone that much now, almost not at all.
- the soft-touch coating of a demo-mock-up is way better than the one they apply on the real phone. The mock-up doesn't get any scratches at all, even if I try to scratch it with nails! This is probably made by HTC on purpose, to keep the demo-phone look good in stores despite being touched and dropped a lot. As for the real phone - of course it's better for HTC to make us buy a new battery cover for some 15-20 GBP in the distant future. Nothing to blame them a lot about, actually, every company does smth like that

New battery cover, sir?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=199270

EddyOS said:
New battery cover, sir?
http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=199270
Click to expand...
Click to collapse
Just as I said ))
...but hey! It's good that they do exist!

Jus received mine, very good quality for the price I must say!
I'm not really worried about the stitches, they look harmless to me

Case mate release the Pop Case to DHD!

very competitive with otterbox, but with grat designing
https://www.case-mate.com/HTC-Desire-HD/Case-Mate-HTC-Desire-HD-Pop-Case.asp

Nice I need to order

Looks very nice indeed! Might have to get one too, to interchange with my Otterbox case.
Though ive got a slight worry that glossy black will scratch like a motherducker in no time.
If anyone gets one can you post some pictures and maybe a video too? Curious to see what that plastic is like. Cheers!

I was gonna go for a casemate tough, but I think I might wait for this, looks very nice.

Just pre-ordered one from here:
http://www.htcdirect.co.uk/index.php?main_page=product_info&cPath=2_12_80&products_id=978
Sent from my Desire HD using XDA App

the back looks great, but too chunky around the screen...

panyan said:
the back looks great, but too chunky around the screen...
Click to expand...
Click to collapse
agree but there is no alternative better

I ordered mine two days ago. It should be here tomorrow. I'll post a review then.

bobbyphoenix said:
I ordered mine two days ago. It should be here tomorrow. I'll post a review then.
Click to expand...
Click to collapse
Sounds great, be sure to take lots of pictures.

Results are in!
Got it on, and loving it! Extremely perfect fit. 100% top quality. It's all one piece, so getting it on is a bugger, but once it's on, you can't tell it's a case unless you know what the phone looks like without it. The light gray part is very soft, and very comfortable to hold. It does not add extra bulk when holding it, but just enough, so now it rest better in my palm. The glossy hard black part makes it look so sexy. Overall a great feeling case. The buttons are the easiest to push now. Even though they stick out ever so slightly they don't look out of place like the OtterBox commuter case. They have a dimple on the inside also which helps press the buttons on the phone, so you no longer need to press firmly, but just a gentle press works fine, but not so gentle that you would press it by mistake. The rubber around the screen is a great fit. It goes all the way to the glass, so you no longer have that aluminum edge there. All in all a great case. I highly recommend it.

bobbyphoenix said:
Got it on, and loving it! Extremely perfect fit. 100% top quality. It's all one piece, so getting it on is a bugger, but once it's on, you can't tell it's a case unless you know what the phone looks like without it. The light gray part is very soft, and very comfortable to hold. It does not add extra bulk when holding it, but just enough, so now it rest better in my palm. The glossy hard black part makes it look so sexy. Overall a great feeling case. The buttons are the easiest to push now. Even though they stick out ever so slightly they don't look out of place like the OtterBox commuter case. They have a dimple on the inside also which helps press the buttons on the phone, so you no longer need to press firmly, but just a gentle press works fine, but not so gentle that you would press it by mistake. The rubber around the screen is a great fit. It goes all the way to the glass, so you no longer have that aluminum edge there. All in all a great case. I highly recommend it.
Click to expand...
Click to collapse
Does the edge of the camera lens protude from the case? Can't tell from the pictures.

PeatCoal said:
Does the edge of the camera lens protude from the case? Can't tell from the pictures.
Click to expand...
Click to collapse
Nope. The lens is slightly inside the case. The entire phone lies perfectly flat. Actually the shinny black back doesn't even touch the surface when it's on its back, so that won't get scratched by sliding the phone on a table or anything. The soft gray side grips are slightly raised from the case, so the middle is actually off the ground (I tried taking a pic of that, but it just looks like it's sitting flush, so I didn't add those).

bobbyphoenix said:
Nope. The lens is slightly inside the case. The entire phone lies perfectly flat. Actually the shinny black back doesn't even touch the surface when it's on its back, so that won't get scratched by sliding the phone on a table or anything. The soft gray side grips are slightly raised from the case, so the middle is actually off the ground (I tried taking a pic of that, but it just looks like it's sitting flush, so I didn't add those).
Click to expand...
Click to collapse
Thanks, that's really helpful. Still undecided between this and the case-mate tough though. Wonder if there's anyone who's tried both.

PeatCoal said:
Thanks, that's really helpful. Still undecided between this and the case-mate tough though. Wonder if there's anyone who's tried both.
Click to expand...
Click to collapse
Well as luck would have it I have one of those on the way too. I'll do the same kind of review when that one comes in. Can you tell I love cases?

bobbyphoenix said:
Can you tell I love cases?
Click to expand...
Click to collapse
..nope
I look forward to it

Nice review ordered mine too just now.
Sent from my Desire HD using XDA App

So, the thing is a ***** to fit into initially.
Will it give way after a while so you can get it in and out easily, or is it some hard plastic that won't yield or wear down? Do you guys who own one see any way of modifying it for quicker removal?
I'd really like a case but I do not want to lose the ability to use my device for satnav, and I already have the Brodit cradle mounted....

psych0t1c said:
So, the thing is a ***** to fit into initially.
Will it give way after a while so you can get it in and out easily, or is it some hard plastic that won't yield or wear down? Do you guys who own one see any way of modifying it for quicker removal?
I'd really like a case but I do not want to lose the ability to use my device for satnav, and I already have the Brodit cradle mounted....
Click to expand...
Click to collapse
The shinny black part is very hard plastic, and since the very soft gray part is fused to it, it is really really hard to get in and out. I almost feel like if I push any harder I'm going to break one or the other, but the soft part is just soft enough to get it in there. I don't see how it could get easier over time. It's one of those cases that once it's on, it's on for a long long time. Compared to the OtterBox Commuter case that one seems like it can fall off, and the Pop case seems like it was actually made into the phone, and not to come off without a struggle, but if I had to make a choice I would pick the Pop case 100% of the time. Again if you compare them side by side the OtterBox looks like it was made for a kid to play with, and the Case-Mate one that you buy tickets to see it in a museum. It is that good!

Thanks a lot for the quick reply mate. I was thinking that maybe one could cut or file down one of the plastic ridges that snap into place around the screen to hold the device.
I done that ages ago on a case for a XDA mini, and it worked quite nicely but obviously there is a thin line between making the in and out easier and making the case unusable by cutting in too far...
Again thanks for your input...
...this chunk of zeroes and ones has been generated by flashing a 400 Watt halogen bulb into the open fibres of a transcontinental communications cable...

Thank you for good products to introduce.

Cases / Shells - what're you getting / reviews:

Ultimately I settled on the trident case, pictures in this post. Thanks to gtny930 for finding it for us.
There are some other good case recommendations scattered through the thread, as I get the time I will source them up here for easier reference.
--------
Hey all, i've been searching amazon off and on for cases for our wonderful device, and finally pulled the trigger on one:
Link here
Says it's by HTC, and I ordered from BlueMall, at $0.32 I couldn't not get it...
Rubberized case, two pieces to fit the slide function, looks like a winner.
I doubt it'll be as good as an otterbox as far as protection, but a buddy of mine has an otterbox for his Inspire 4G - and suffers from serious overheating problems. Since our phone already suffers from that with the stock battery i'm gonna pass otterbox by on this phone. (Anker 1900 battery solved overheating problems for me)
Anyways, at less then $3.50 shipped, seemed like a fantastic deal.
Meantime, I have a screen protector and bodyglove on it now, which seems to be a good temporary fix until some proper protection was available. Love the glove, but to me it's only a temporary solution.
What're the rest of you doing for a case or protection for your phone? I'd love to hear about it.

ArmorSuit and HTC Messenger
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.

Found this on Ebay. Still waiting for it (and MT4GS) to come. =[
I'm not allowed to post links yet so just put a dot in between.
http://www ebay.com/itm/HTC-MYTOUCH-4G-SLIDE-Hard-Cover-Case-SUMMER-FLOWER-/220839183408?pt=PDA_Accessories&hash=item336b0a8430#ht_2773wt_673
Lily.

MT4GS Cases / Shells
The rubberized hard Body Glove shells offered by T-Mobile (and sold on Amazon, eBay, etc...) are bulky and are missing holes for the microphone above the camera lens. I ended up buying the full body Invisible Shield and it looks great. The only problem is that they didn't include a piece for the bottom front of the phone (under the buttons and around the touchpad). I can put a hard case over the shield if I want, for extra protection or to just change up the look.

I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).

I'm actually a fan of the body glove case. I'm just waiting for something with more clearance because of the anker battery. I've heard goods things about the otterbox, but it is kinda bulky.
Sent from my MyTouch 4G Slide

SolemnWishing said:
I have the solid black case. Just some things to note. First, the back piece is very tight, and I don't think it will ever fall off. However, when removing and replacing the cover, the clips can easily scratch your phone. Second, one or two clips may not actually "clip" to the phone, but rather just get stuck near the top so it still holds from pressure. This really isn't noticeable, but it leaves indents from the pressure on the phone's case. In addition, the clips scrape up against the backside of the screen when sliding up the phone, and over time, start leaving a very noticeable mark. I corrected this with a just a strip of tape over where it was scraping.
The protector for the sliding part of the phone was a bit of an issue. It clips very tightly to the phone, but the clips scrape a lot against the edges of the phone next to the keyboard. In addition to making it a little more difficult to slide the phone, it leads to wear overtime (noticeable wear actually started in less than a few hours of normal use for me). I corrected this by actually cutting off the clips, and using double sided adhesive to stick that part of the case on. It doesn't scrape anymore, but at the same time, it just doesn't look good as the case doesn't properly hold together.
I don't really see how much of this can be fully fixed. I used to own a G1, and I didn't notice the issue of cases scratching the phone until it was too late, but I was able to notice it on my MyTouch. I'm hesitant to go for the BodyGuardz. I had one on my G1, and though it was nearly invisible protection, and protected 95% of the phone, I ended up dropping my phone and it landed on a sharp rock on part of the 5% that happened to not be covered (which ironically actually are the corners of the phone, where it is very likely to land on).
Click to expand...
Click to collapse
I was going to edit in my response about the case I got in the first post - but after this one I quoted I need say not much more.
I really want to like the case, it feels nice and looks good on the phone...but it makes it too much of a pain in the ... to get the back of the case off.
I didn't realize how often I pop the back of the phone open to swap out memory cards until I put the case on.
It lasted on my phone for about 3 hours before I took it off...and it scratched one corner of my phone when I did it. Scratch isn't bad, and it'll probably buff out over time, but it's the first damage the phone has suffered - ironically from the thing that was supposed to prevent this.
If you are never going to pop open the back of the phone to get to the memory card, and you don't mind the backside of your screen-half of the phone getting scratched up when you slide it open - then this is a pretty decent case.
I think the scratching the back of the screen part can be solved by using a knife to cut a sliver off the part that sticks op, then maybe using a small piece of electrical tape to cover that clip.
I like it, I want to like it, but I can't use it - I take the phone apart too damn much for a case like this to be practical.
I'm on the lookout for a gel-type case now. Think that'll be the perfect solution. If anyone finds one, please mention it here.

I got the black cheap case today. After reading the reviews I knew better than to just throw it on there. So I took a small metal file that I have, and proceeded to shave each clip down just a little. After a few trials I got the clips shaved down enough that they all fit and are not pressing against the bottom of the screen hard enough to scratch it.
The coating on this case was not really rubber. Its more of a dusted flat black. It's not slick to the touch, but it doesnt grip like the rubber of the phone.
The phone still fits into the generic style T-mobile mount. But its not as secure as without. I can turn it upside down and give it a light shake without coming loose. So hopefully it will be fine.

I got my psychedelic cover and I'm not very impressed with it. It makes the phone very bulky and awkward to hold (maybe because of my small girly hands -_-).
I find taking the back cover off particularly stressful because I'm scared I'd rip the screen off the keyboard.
Protection wise I haven't dropped my phone yet to see what kind it would provide but I'm guessing it wouldn't fall off the phone if dropped.
Haven't seen any dents or scratches caused by it.
I think I'd prefer it if it had a more rubbery feel as the texture is kind of smooth and slippery.
Overall, I'm satisfied with it but I wish I could figure out a way to take off the cover without the fear of destroying it. Haha.
Lily.

@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?

The otterbox exists for this phone? Or you speaking generally about the otterbox product line?
Sent from my MyTouch 4G Slide using xda premium

ssb33 said:
@siani_8
I got this: ....
.....
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Quick question - in the pictures you uploaded to Amazon the phone back and sides seem to have a checker pattern. Is that pattern due to the protector?
Click to expand...
Click to collapse
Yes, it's a woven "carbon fiber" pattern. I took the pictures at angles where the light shows it more clearly. I think it looks nice and provides a "non-slip" surface as well without adding any bulk to the phone when you want to use it, which I personally prefer.

siani_8 said:
I got this:
http://www.amazon.com/ArmorSuit-MilitaryShield-Protector-T-Mobile-REPLACEMENTS/dp/B0058XMYDU/ref=sr_1_3?s=wireless&ie=UTF8&qid=1314661800&sr=1-3
I posted "customer pics" of what is looks like on my phone too at Amazon.
I'm coming from the G1 and was used to the G1 sleeve so I also bought this:
http://www.amazon.com/HTC-Messenger-Pouch-HD2/dp/B003DZ13OG/ref=sr_1_1?s=wireless&ie=UTF8&qid=1314661896&sr=1-1
It's a nice fit and doesn't stick out the top.
As a side note.. I also bought the case you posted. I like it but it won't fit over the ArmorSuit and I really like how the suit looks and feels on the MT4GS. The phone with suit fits well in the pouch...good combo in my opinion.
Click to expand...
Click to collapse
Thanks for linking this and posting the pics on Amazon., I'm going to order one today.

Thanks. I ordered one and installed it yesterday. The front and back went on great. I had more trouble with the sides but that is because I am not the most deft person around. There are a lot long thin pieces but MT4GS has a lot of moving parts. The phone looks great from the front. But the back has a bubble or two - again my clumsiness.

I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2

_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
http://www.amazon.com/gp/product/B005H98VI2
Click to expand...
Click to collapse
That's about the same thing I got that I posted about before - just mine is in black.
I know I said a few posts back that I wasn't going to use it, but I had to do something to try to keep it safe.
I've been using it for a few days now, and while I have my gripes, I suppose it's okay.
I got tired of not being able to put it down anywhere, for fear of scratching the camera lens. This case sits further down then the lens, so it isn't the thing the weight of the phone rests on.
Before, i'd have to find something soft to put it down on everywhere I went, which was annoying. I wouldn't put it in my pocket, because they are always full of dust and whatnot - that little grainy stuff gets into the phone and I didn't want that.
Now, with the case on, it doesn't fit in my belt holster anymore - so I have to put it in my pocket or carry it. Desperately seeking another solution but coming up short.
What i'm thinking about doing is drilling some holes in the back of the case, and attaching a belt clip to the hard case shell itself.
So now i'm looking for either a belt holster or a clip I can attach to the hard case itself. Whatever ends up happening, i'll get some pictures and put 'em up here.
What I really, really, really, really want is a soft-rubber case, like a gel case of some sort that can absorb shock - not some hard plastic thing.

_atlien_ said:
I wonder how long Otterbox will ignore this phone? Annoying....
Meanwhile, this HTC shell is gettin it done. Only complaint is that its not Otterbox.
Click to expand...
Click to collapse
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.

cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....

Any body have a silicone case? Or one of these?
http://www.ebay.com/itm/HTC-MYTOUCH...Accessories&hash=item231421d01f#ht_1896wt_922
Looks good. Other colors available too.

cOvertKEEN said:
Can you 2 that got this case tell me if it fits OK? I hate cases that feel like they are going to fall off after they are on...does this one do that? Specifically when you slide the keyboard up with your thumbs does the front part of the case feel like it would fall off because of your thumb pressure?
Just wanted to be sure it was somewhat well constructed...the $5 price tag just has me concerned.
Click to expand...
Click to collapse
_atlien_ said:
No, it's fine. I've dropped the phone twice and the case hasn't come off. And it certainly isn't about to come off from handling/usage of the phone. It fits snug. Supposedly its made by HTC, if that means anything. The case does it's job without problems.
Just waitin for Otter.....
Click to expand...
Click to collapse
It fits snug, coming off accidentally isn't a problem. Both the top piece and the bottom piece are secure, normal - or even some exaggerated abnormal - use won't knock it off.
The longer I use the case the more it grows on me, I really like the silky feel of it. There have been a few situations already where having a case protected the phone - I haven't dropped it and hope I never do, but since it's becoming a portable video game system/controller amongst other things it can't be without one.
I suppose you could do far worse then this case, but i'd trade it for a gel-type rubber case in a heartbeat. Hard cases don't protect from shock damage.

Closeup pics of the latest Dbrand Prism and Grip

Hi guys, I'm sure you've seen quite a few pictures of those accessories, so I thought I'd post here a few images from very close to some details so you can have a good idea of the finish, etc.
Also a small comparison with an official case (nylon one). I've ordered a skin for it, but it was on preorder and just started shipping today.
Sorry for the lint on some pictures, it does catch it ^^
As for my opinion (one more of those), well the case does feel real good in hand, the phone feels really safe in there. The buttons are real good (miles better than Rhinoshield bumper). Only thing is that the fingerprint scanner is deep and in a small window, so must get a little used to the feeling of really accurately put the finger in there. And is it grippy ? Is fine! a bit better than the official case but not by super much.
Prism is also good, easy to install. Biggest critic is how sharp the edges are (you can see on the pictures). If you don't use a case, you'll feel them and I'd be afraid to lift it by mistake, not sure how securely it sticks. The feeling is like glass, I was using the phone naked previously and no problem with that. Also, it does not affect the screen, I think ; some peops say it makes the screen cloudy, but I do not notice.
Worth the price ? Hmm those things are a rip off no matter what. But they are both good quality products, and the glass screen protector without a black border is a real step up ^^.
There you go!

Thanks for sharing! Would you recommend dropping $$$ on this combo?

silent_freak said:
Thanks for sharing! Would you recommend dropping $$$ on this combo?
Click to expand...
Click to collapse
Well, all in all, it is near 60 USD.
The case is good I think, feels good and will protect the phone that's for sure, so if you don't have anything like that, it is a good buy. I also have an official OP cover and the main difference is that the Dbrand case has raised edges.
The glass, while it is good, is not as ground breaking as I imagined (Dbrand's marketing team is good ^^). The plus is that it feels like glass and does not have a black border, is as fingerprints resistant as the bare glass or the official screen protector. The bad is that the glass as you can see on the pictures is really only on the screen and has sharp corners, so you feel it when doing gestures, unless you use a case (because then your finger does not slide from the farther edge of the phone, if you see what I mean).
So out of the two, I would say the actually real good product is the case.

The case looks too bulky to me. I prefer the slimmer ones like the official protective sandstone or the karbon bumper, which are really well made. But I guess it depends on the environment you're working in (etc) which affects the danger your phoneis in, in which case, if it's a place you can easily damage it, this type of case can save you good money on repairs. The prism looks really durable from what I've seen online and I believe you get 2 in the box if I'm not mistaken, so if that's true, that's a big plus over rhinoshield's overpriced 1x black bordered piece of crap that covers at least 1mm of screen on each side, forcing you to just take it off minutes after installation and breaking it in anger.
Anyway, thanks for giving us a look at dbrand's new products. Was really looking forward to seeing someone talk about that.

dragos281993 said:
The case looks too bulky to me. I prefer the slimmer ones like the [...] Was really looking forward to seeing someone talk about that.
Click to expand...
Click to collapse
I agree as well, it does add quite a bit of bulk.
I have all in all 3 cases. The simple one from OP (carbon one), their thicker nylon one and this one from dbrand. I don't really need a lot of protection (scratches protection is good enough) so it's mostly to change the look. I go naked as well with just a skin.
The result is that with that dbrand case you do feel very confident that the phone is safe.
Yes you do get two prism in the box, so that's actually quite a sweet deal because those are sturdy and nice to the touch really like glass without the border.
I have not been able to try with the simple case from OP, it's still in my boxes after moving house, but do not underestimate how annoying the edges of the prism are. They really really get in the way.
I think it's important to stress this because for example people were downplaying the terrible buttons of the Rhinoshield bumper for op5 and I got it and it was in actuality very bad.

kipue said:
I agree as well, it does add quite a bit of bulk.
I have all in all 3 cases. The simple one from OP (carbon one), their thicker nylon one and this one from dbrand. I don't really need a lot of protection (scratches protection is good enough) so it's mostly to change the look. I go naked as well with just a skin.
The result is that with that dbrand case you do feel very confident that the phone is safe.
Yes you do get two prism in the box, so that's actually quite a sweet deal because those are sturdy and nice to the touch really like glass without the border.
I have not been able to try with the simple case from OP, it's still in my boxes after moving house, but do not underestimate how annoying the edges of the prism are. They really really get in the way.
I think it's important to stress this because for example people were downplaying the terrible buttons of the Rhinoshield bumper for op5 and I got it and it was in actuality very bad.
Click to expand...
Click to collapse
I dropped my OP6 from approximately 2.5meters from the locomotive's door and the phone miraculously survived with the karbon case having one nick in the top right side corner and surprisingly that disappeared after a few days. Very impressive quality. I was also very lucky, I guess, considering the height the phone fell from. THEN I got the bumper case from Rhinoshield along with the garbage black bordered glass. I broke the glass in half after basically donating money to them because that glass was not worth the price, but that was that. I put their bumper on my phone and left it there for a few days. ****ty buttons, poor quality material and slippery too, like a hard plastic you find in those kitchen accessories, but whatever, I liked the alert slider one. Then one day I got in my car and the phone fell from my pocket on concrete (or asphalt) and because it happened right at the edge of the road, one hard little rock managed to touch the edge of the screen at impact and cracked the screen on the middle right side with the crack starting from the bottom and ending in a "C" shape 2 or 3 centimeters above. So it's still ok but the start of the crack can be felt at touch so that's a bummer.
And in the end I could've given the money to the old lady beggar at the corner of the street instead of giving it to Rhinoshield for 2 absolutely rubbish products they made such a big fuss about.
Never again I'll buy from them. Dbrand's products seem a bit different though especially that prism. I might get one and put it on the screen to protect it from getting other cracks if I accidentally drop it, cause the crack is pretty small to make me replace the screen. I don't think it's worth it.

dragos281993 said:
I dropped my OP6 from approximately [...] . I might get one and put it on the screen to protect it from getting other cracks if I accidentally drop it, cause the crack is pretty small to make me replace the screen. I don't think it's worth it.
Click to expand...
Click to collapse
Yeah, as usual those things are very often quite a leap of faith. We want to believe that the more expensive it is the better it will be but the truth is that it's probably the same or close to the same with a different packaging :angel:
But need a screen protector at least to maintain the resell value of the devices.
I'll say again, prism is a good one but not perfect (like none of them is).

Can you comment on the alert slider functionality with the case on? I can make it out slightly on one of the pictures and it looks like you can use it with ease?
I'm currently using a Poetic case, I need a solid case with my work conditions. The only issue is the damn alert slider is rendered unusable without a pen or something similar handy.

ahagersr said:
Can you comment on the alert slider functionality with the case on? I can make it out slightly on one of the pictures and it looks like you can use it with ease?
I'm currently using a Poetic case, I need a solid case with my work conditions. The only issue is the damn alert slider is rendered unusable without a pen or something similar handy.
Click to expand...
Click to collapse
Hey,
The slider is quite easy to use yes.
You got to get a bit used to it cause its quite nestled in there so you have to make a little effort at first to put the finger the right way.
Same as with the fingerprint reader, a little bit of time to get used to it, because it's deeper so you can't approach it from whatever direction like you would naked or with a different case. It's still easy to use.
All in all out of their two products, I recommand the case with no problem. If you look for safety then for sure go for it.
Will make a few more pics to show you.

kipue said:
Hey,
The slider is quite easy to use yes.
You got to get a bit used to it cause its quite nestled in the so you have to make a little effort at first to put the finger the right way.
Same as with the fingerprint reader, a little bit of time to get used to it, because it's deeper so you can't approach it from whatever direction like you would naked or with a different case. It's still easy to use.
All in all out if their two products, I recommand the case with no problem. If you look for safety then for sure go for it.
Will make a few more pics to show you.
Click to expand...
Click to collapse
Thank you very much for your time!

ahagersr said:
Thank you very much for your time!
Click to expand...
Click to collapse
Sure, no problem.
So here are a few more. The last one is to show how the phone screen does not touch a flat surface when it is put face down. It's blurry but you'll get the idea.
Also some lint, not fighting that anymore