I just bought the Fuze. The screen looks awesome. However I am having a problem where the touch screen is very unresponsive. I find myself having to tap the screen two or three times to get it to react. For example, I have to tap the Windows icon a few times before the menu opens. I also find that pressing harder on the screen with my finger or stylus makes it react a bit better as well. I shouldn't have to press that hard however. I never had an issue like that on my Kaiser.
Was wondering if anyone else has this problem. Could it be an unoptimized OS or video driver? Any way to adjust the sensitivity of the touch screen? Basically, I want to know if this might be an OS issue vs. a hardware issue.
I hate to return such a nice phone because of how unrepsonsive it is.
BTW, I am using ROMeOS v1.4.
Thanks for any inputs.
Its probably not defective in anyway. The fuze screen is a resistive screen, not a capacitive screen (the iPhone), so you do need to press a little harder. You can install the advanced config app and/or the TF3D customizer app to change the screen sensitivity. I have it on my fuze and it does make quite a difference.
FYI you need .NET compact framework 3.5 in order for advanced config to work
djcaston said:
Its probably not defective in anyway. The fuze screen is a resistive screen, not a capacitive screen (the iPhone), so you do need to press a little harder. You can install the advanced config app and/or the TF3D customizer app to change the screen sensitivity. I have it on my fuze and it does make quite a difference.
FYI you need .NET compact framework 3.5 in order for advanced config to work
Click to expand...
Click to collapse
Thanks for the reply. What setting did you use?
I just use the TF3D config with performance setting #4, which is the screen sensitivity one, I believe. I find that to be the best setting. The other thing you might wanna try, even though it may seem obvious, is realign the screen. that could cause some problems.
Screen Not Responsive
my screen has become unresponsive over 75% of the time. same w/stylus or finger. already adjusted sensitvity through Advanced config tool, and Diamond tweak. try to re-align screen, and most of the time, screen does not even recognize the taps. This happened on previous one I exchanged. HELP ! !
Do you have a screen protector on your device?
I noticed that my Touch Pro was very unresponsive until I got rid of the stock screen protector and used it bare-screen
Try the second cab in this post
http://forum.xda-developers.com/showthread.php?t=469865
It drastically increases sensitivity for our pleasure--i felt that it does a better job than TF3D and Advanced Config. There may be an issue with your ROM--my old Tilt would lag on me dependent on the ROM even when the programs installed were identical. Currently using NATF's.
Screen Not Responsive - fixed
Wow ! !, I never would have thought it was the screen protector. I took it off, and it works great. thank you to TehPenguin. maybe it needs to be changed more often, or use a different brand.
That, was my second guess...but seriously, try the cab...
If you're using a snap=on case that can also cause the screen to stop responding. I was using a very cool looking red snap-on case I got from ebay. I got home from work today pulled out my phone to do something and it was completely unresponsive. I finally took off the case and it worked fine.
Hello.
I want to ask,if is possible to decrease touchscreen accuracy to be sensible as QVGA?
Explanation:
I think,that the digitizer wants to recognize exactly the current pixel from small VGA screen. The problem is,that when you touch the pixel,it is necessary to release the display at the same pixel for confirming your action. If you move to neighbour pixel,the action isn't confirmed often. Unfortunately the screen is very small and this is very difficult to perform with the fingers. On old QVGA PPC's is not so sensitive,so I will be happy,if we can be able this pixel recognize as a 2x2pix.area. The main problem is when you try to tap small icon,where on the QVGA 2.8" screen you do it without problem,VGA 2.8" makes it quite impossible.
Any ideas?
Is there a way to adjust touchscreen sensitivity, either using some standard option I haven't found yet or a third-party utility?
My screen is sometimes a little trigger-happy. It sometimes responds to a normal tap as if it were a hard press.
Thanks.
Sometimes when my finger is close to the screen, it automatically "touches" the screen, is this a normal problem? Why is it so sensitive? I don't even touch it yet but it already "touches" the screen
My Mi5s Plus has a strange touch screen behaviour: when I tap something and then slowly release my thumb from the screen, the touch screen seems to "feel" my finger until I move it 1-2 millimiters away from the glass. Basically, the touch screen works even if my finger isn't touching physically the glass, but only after touching the screen first (kinda like the glove mode on some Samsung phones, but not really).
That behaviour is really annoying especially scrolling because it feels like I'm scrolling "too much" because of the higher sensitivity my touch screen has.
I've tried both SGS Touch Screen Booster and editing the build.prop file adding this:
Code:
debug.performance.tuning=1
windowsmgr.max_events_per_sec=200
view.touch_slop=2
view.scroll_friction=1.5
view.minimum_fling_velocity=25
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
ro.min_pointer_dur=8
touch.size.calibration=geometric
touch.size.scale=100
#touch.size.bias=70
touch.pressure.calibration=amplitude
touch.pressure.scale=0.3
and tweaking values, but nothing seems to change.
I'm using LineageOS (latest release) right now, but I experienced this "bug" on MIUI too, although I haven't tried the latest release.
Hope somone can help me!
Kind regards
EDIT: for whatever reason, the behaviour occours even on recovery (TWRP) so I guess it's an hardware issue
Sadly, it's probably a hardware issue as you assumed. You may try to check the connection cables.