Use BT headset for audio - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

I'm sure most of you have already seen this but I couldn't find any reference to this on the forum. This works on kaiser XDA-Live 1.2 (and I'm sure all the other ROMs too)
from the webpage: http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52
Description: Want to listen to your music stored on your Windows Mobile 6 Professional device, but don't want to carry around a corded headset? If you've got a BlueTooth headset, then you're in luck! With this program, just start it up, and all of the sounds from your system will be rerouted from the internal speaker to your BlueTooth headset! This program does not require the 2.0 Compact Framework.
direct WM6 download:
ftp://www.trianglepowers.com/ppc/BTAwm6.CAB

thanks this is pretty cool

Man i have asked for this a couple times so glad, Thanks a lot

apparently the original site is now down, file is attached.

Thanks! This worked great for what I needed it to do!

interesting...so how does it work when you get a phone call? any conflicts?

it doesn't work on my jawbone with Dutty's WM6.1.

Works with my h681 Motorola and Dutty's 6.1
I chucked my Jawbone. It would not work with the Tilt...

man...didn't work on my platronic headset.

DSmithZ28 said:
Works with my h681 Motorola and Dutty's 6.1
I chucked my Jawbone. It would not work with the Tilt...
Click to expand...
Click to collapse
Works with my Jawbone and Dutty's 6.1...
I have two Jawbones and they both work with the Tilt. Too bad you had to chuck it. Best BT Headset, IMHO.
-Humbert

Related

HTC BH M100 Bluetooth® headset

How to get it work with Qtek S200.
This is how I did it.
Get the aku33_a2dp (search the forum) and install the two CAB-files by copying them via activsync to ex. my documents. Install them from there
Get aku35_a2dp (search the forum) and copy three files to the \windows directory (Avrcp_MPplugin.dll; bta2dp.dll;sbc.dll) of the pda
Reset your Qtek and delete any pairing with HTC BH M100 Headset.
Pair it again and you will have the option to set "Wireless Stereo".
Good luck
Is it stable?
Did you have some problems with it?
Stereo Headset
So far it Stable
It works like a charm.
I'll let you know if I have any trouble later.
the a2dp was already working on aku 2
the problem was the sound's quality... kind of saturated/metallic on some frequencies...
Are you experiencing the same problems or is the sound good?
i try to search with key word "aku33_a2dp" and "aku35_a2dp" but it only refers to this thread. could you just upload the file?
baramuse said:
the a2dp was already working on aku 2
the problem was the sound's quality... kind of saturated/metallic on some frequencies...
Are you experiencing the same problems or is the sound good?
Click to expand...
Click to collapse
Just out of interest, are you using an iTech or iTech derivative A2DP device? Looking closely at the forums, it seems like the HT820 is experiencing perfect sound quality - I purchased some (arriving soon, currently have iTech R35) to test my theory, just looking for some confirmation.
edit: I found it
desperado 27-04-2006 03:26 PM Just some finding to share everyone here. I am using 818Pro Chinese version. I have tried the i.Tech S38 and Motorola HT820 bluetooth headset and found that the latter is of much better MP3 sound quality than the former. There is no hissing sound for HT820.
Click to expand...
Click to collapse
edit2: sorry, clarification, the S100, the stereo version of the HTC bluetooth headset, appears to be the iTech R35.Exhibit A , Exhibit B
theone3 said:
Just out of interest, are you using an iTech or iTech derivative A2DP device? Looking closely at the forums, it seems like the HT820 is experiencing perfect sound quality - I purchased some (arriving soon, currently have iTech R35) to test my theory, just looking for some confirmation.
edit: I found it
edit2: sorry, clarification, the S100, the stereo version of the HTC bluetooth headset, appears to be the iTech R35.Exhibit A , Exhibit B
Click to expand...
Click to collapse
strange I thought it was the MS bluetooth stack (and especially the A2DP dll) that was delivering poor sound quality because with the same headset (plantronic A590) I had good sound with an ipaq (widcomm stack) and crappy sound on my S200 (with MS stack)...
baramuse said:
strange I thought it was the MS bluetooth stack (and especially the A2DP dll) that was delivering poor sound quality because with the same headset (plantronic A590) I had good sound with an ipaq (widcomm stack) and crappy sound on my S200 (with MS stack)...
Click to expand...
Click to collapse
Yeah, it is, it's just worse with some than others. The Plantronics A590 has been reported as sounding 'muddy' on the prophet. I think it's basically just finniky
Here is where I found them.
http://forum.xda-developers.com/attachment.php?attachmentid=31803&d=1165260031
http://forum.xda-developers.com/attachment.php?attachmentid=32121&d=1166242625
Thank You
It worked just fine to me.
You where so much helpfull!
Mike
stsastsa said:
How to get it work with Qtek S200.
This is how I did it.
Get the aku33_a2dp (search the forum) and install the two CAB-files by copying them via activsync to ex. my documents. Install them from there
Get aku35_a2dp (search the forum) and copy three files to the \windows directory (Avrcp_MPplugin.dll; bta2dp.dll;sbc.dll) of the pda
Reset your Qtek and delete any pairing with HTC BH M100 Headset.
Pair it again and you will have the option to set "Wireless Stereo".
Good luck
Click to expand...
Click to collapse

WM6 and A2DP

Hi all Gurus!
I was planning to get myself a Jabra BT8010 and plan to get it working with WM6 installed XDA MiniS.
Generally, how is the sound quality of BT A2DP as compared to normal headphones? Are there many issues in BT Stack of WM6 that might prevent nice music experience?
Also, has anyone tried BT8010 with WM6 Orwell's rom? and got it working perfectly fine?
And can we just jot all the issues/problems/solutions faced with WM6 (whether Orwells or PDAViet) and A2DP here in this thread?
Mods, the specific threads are all scattered so I thought I would start off this thread specifically for WM6 and A2DP. Please delete this thread if this topic doesnt require a separate thread.
thanks,
Sid
Works fine on mine with a Sony Ericsson DS910, and an iTech Blueband.
It has AVRCP also, so with the DS910 it supports all the controls.
Quality is probably about the same as A2DP from my K800i, but it is all quite memory intensive, so if you're low on ram it will stutter like a bastard.
i had the PDAviet 3 WM6 and the xound quality on mine was okay..its just a cheap think i bought on ebay that you plug your own headphones into. its eem sto lose some base and sound a bit tinny compaired to the same headphones plugged into my 8125 directly, but that could just be my BT receiver.
I have Nokia HS-12W and the music quality if good with same gaps in music but the quality in voice is very bad!
The voice is like talking from far!!!!
If someone solve this problem please tell us!
Im Using my Mono SE headset to listen to movies etc on the go and have noticed a bit of a drop in quality from WM5 to WM6, It seems to crackle more on WM6.
Bluetooth range is very good though, I was on a call the other day and someone came to the gate so I got up and went outside still talking on the headset only to realise my Wizard was still on my desk 10 meters away
Jules
totalcmdext said:
I have Nokia HS-12W and the music quality if good with same gaps in music but the quality in voice is very bad!
The voice is like talking from far!!!!
If someone solve this problem please tell us!
Click to expand...
Click to collapse
I use iphono mini with WM6, quality in music is quite good (similar as WM5) once you add the bitpool registry key to 40 (before a lot of skips).
But used as hands-free has quite bad quality, at least in my case most of the times I have to disconnect the bluetooth and use the phone.
Perhaps the Jabra are better in this aspect.
rodalfa said:
I use iphono mini with WM6, quality in music is quite good (similar as WM5) once you add the bitpool registry key to 40 (before a lot of skips).
Click to expand...
Click to collapse
Can you share the exact location of this key in the registry?
Although my Jabra hasnt arrived yet. I just want to be ready.
--Sid
Got My Jabra BT8010!
Hi All,
I got my Jabra BT8010 working with the WM6. I am pleasantly surprised with the voice quality. Music thru the stereo headset is also excellent, but sometimes the songs seem to slow down or plays fast randomly.
I tried overclocking, but it did not do much good.
Has anyone faced this? this doesnt happen everytime.Just randomly, the speed of song increases or decreases. Any pointers in this?
Further, Anyone knows how do I activate cyberon voice dialling thru this? The MS Voice commander doesnt work well with Indian names :-(
Thanks for the help...all. I also filled the petition for XDADEV to allow storing the ROMs at this site!
sids911 said:
Hi All,
I got my Jabra BT8010 working with the WM6. I am pleasantly surprised with the voice quality. Music thru the stereo headset is also excellent, but sometimes the songs seem to slow down or plays fast randomly.
I tried overclocking, but it did not do much good.
Has anyone faced this? this doesnt happen everytime.Just randomly, the speed of song increases or decreases. Any pointers in this?
Further, Anyone knows how do I activate cyberon voice dialling thru this? The MS Voice commander doesnt work well with Indian names :-(
Thanks for the help...all. I also filled the petition for XDADEV to allow storing the ROMs at this site!
Click to expand...
Click to collapse
Give this cab a shot. My buddy uses it on his Mini S, says it works wonders. I don't have a a2dp headset yet. I forget what brand he has, it's a something-com I think, the one that folds up.
My BT620s is on the way, I can't wait. I will let you know how it works out.
computer9cowboy said:
My BT620s is on the way, I can't wait. I will let you know how it works out.
Click to expand...
Click to collapse
I got it today.
The damn thing took forever to charge the first time.
I have to say I am very impressed with this thing. Works out of the box with WM6, so far no issues whatsoever. The sound quility is not audiophile level, however it is a lot clearer than I thought it would be!
I was listening to some songs that i have only heard on my crappy laptop speakers and they are awsome. I can hear a lot of things that I couldn't hear before. The bass on these is great.
the best part is that they were only like $60 US, that is less than I paid for my Jabra BT800 a year ago.
I Give the BT620s a 2 thumbs up!!!!!
btw no A2DP fixes have been applied to the Mini S, I am using PDAViet 3 so I am not sure, actually there may be some tweaks in that.
Using A2DP on pdaviet3 with the itech clip IIs headset works great for me:
PROs:
- no skipping after 20 min of mp3 playback
(EDIT: it does drop audio for one sec about 1-2 secs after initial playback, but then resumes)
- not wired headphone sound but pretty darn close
- seamless music pause/resume with incoming calls
- no problems at all with MS Voice Command
CON:
only one so far - people on other end when asked about sound of MY voice said it was a little distant/tunnel sounding (but this is more due to the mic location on the itech)
That being said, I've just "reverted" back to faria's 3.3 rom. Today screen with SPB Pocket Plus/Diary combo seems snappier.
i have wm6 and sonorix OBH-0110, and sound quality if awfull comparing to PC connection with toshiba bluetooth stack. and some cooker said that wm6 bt stack is alot worser then wm5 one.
Hi All,
I dont have this location on my WM6 Orwells: "HKLM/SOFTWARE/Microsoft/Bluetooth/AD2P/Settings/"
The "Settings" folder and the subkeys are not there. This location was there in WM5 while it isnt there in the WM6. Does anyone know where it has been relocated?
And any settings for A2DP skipping and Music playback speed uneven-ness?
Added those bitpool registry keys but they seem to have no effect. How can I improve A2DP sound quality in WM6?
AgentSmith said:
Added those bitpool registry keys but they seem to have no effect. How can I improve A2DP sound quality in WM6?
Click to expand...
Click to collapse
Did you create those locations manually?
Even after installing that bluetooth fix cab in this thread, I still have problems with skipping and song playback speed intermittant. :-(
Gurus!!! where art thou????
sids911 said:
Did you create those locations manually?
Even after installing that bluetooth fix cab in this thread, I still have problems with skipping and song playback speed intermittant. :-(
Gurus!!! where art thou????
Click to expand...
Click to collapse
Yes I created those manually. Now I use Molski's AKU3.3 Crossbow style rom and sound quality improved alot. Still not on the same level as a wired headset but much better nonetheless. As soon as there is a better WM6 rom with working A2DP tweaks I will upgrade again.
An Update,
I used this A2DP fix http://forum.xda-developers.com/showthread.php?t=284974
and skipping went away. Also, music quality reduced.
I uninstalled the fix, and I have the quality back, but songs have started skipping again.
Cant MS provide for a better BT stack in WM6 with all their development prowess??
Would going back to some stable ROM like Molski's or Farias WM5 help?
Faria's WM6 and A2DP
Another update....sighhh
I updated my Wizard to Faria's latest fully loaded WM6. The skipping reduced a bit, but thats about it. The Music speed is still intermittant.
Seems like I wouldnt be able to enjoy this gift. Why cant things just RUN....
I am guessing, changing ROMs wouldnt help...or would it? Does Widcomm stack work on WM6? Anyone with this experience?
The next ROMs I am gonna try are:
1. WM6 MBE
2. Farias 3.3 AKU
3. Molski's WM5
After that i will try selling my Jabra BT8010.
sids911 said:
I updated my Wizard to Faria's latest fully loaded WM6. The skipping reduced a bit, but thats about it. The Music speed is still intermittant.
Click to expand...
Click to collapse
Anyone figure out a cause behind the intermittent skipping and speed fluctuations when playing music over bluetooth? I'm using the XDA Mobile 6 release 2a ROM with my BlueAnt X5i headphones. Everything works for the most part. But about 10 to 15 minutes it will drop audio for a few seconds, then start back up again. Annoying but I can live with it.
What's really irritating is the fluctuations in playback speed. For some reason playback tends to speed up every 5 minutes or so. When I skip ahead or go to the next song and it's fine. Then the issue recurs again in 5 minutes... repeat cycle.
I've tried using different mp3's of different bit rates and that doesn't seem to have an impact. I've also tried different players - WMP, TCPMP, GSplayer, Mortplayer, etc. All seem to behave the same way when it comes to variations in speed during playback. Any ideas on this one????

BT help!

Hi,
First of all i would like to thank you all for your efforst in putting together this WM6 ROM's. Its nice to try to them out as a 8125 user, as cingular is not planning to release an official WM6 ROM. You guys are awesome!!
Anyhow, my question is, in WM5 ROM, i use to like the voice dial feature, which turns on by clicking on the BT headset. Most of the ROMS here trasnfer the sounds to BT if i click on the headset.
Is there a way around this? I dont like the sound to come through BT as i work on shop floor and like to keep my phone at highest volume.

bluetooth problem w/ patch and voice commander

Hi together,
after all my cruise is now working quite good, and even the odd bt-headset problem is solved after installing the two bt-patches (I´m using Bepe V.0.67).
But now: I can´t commander voice command while pressing the speak button of my Nokia BH-602 headset. This worked before installing the patches.
So: Headset works, but without vc function.
Anybody got a workaround for this problem? Than cruise is almost perfect for me.
Thanks
amcom
That function did not work with my Jabra BT3030 before and still doesn't after the hotfixes.
edit: actually on further mucking about it does work. I have both BT hotfixes installed and it now works.
voice commander now works with my plantronics headset but it never ever dials the right person.. I had a blackberry pearl before this phone and the voice dailing worked even when using a power tool, but the one on HTC sucks real bad
OEMAGW.dll
After patch, OEMAGW.dll chanched, 2x Bigger.
I also want to run MVC BTbutton
This for OEM progs working, but sounds out device speaker
"Path"="\\WINDOWS\\voicecmd.exe"
I found a solution, working for me. After reinstalling an original ROM without MS VC implemented I installed VC seperate. After that I installed a small programm called jetware mobile. This programm routes all signals to the headset.
So everything works fine now. I´m happy, hope you´ll be too!
amcom

Nokia CK-7W with Diamond, it works!

Well, this is not really a question or problem. But just a headsup that the Diamond works just fine with my Nokia CK-7W.
However it would also be nice to hear from you guys (and girls) as well, since I can't imagine I'm the only one with succes!
You might wonder "Why the hell do you post this?!". Well, that's simple because when I wanted to find out whether that Nokia carkit would work together with the Diamond I coulnd't find anything.
And since my experiences with Nokia carkits and HTC phones weren't all that good (read: BAD, lots of echo and weird connection problems) I was pretty anxious to give this a try.
After testing it on another CK-7W, which was already built in a car, I figured it worked perfectly so I took the plunge and got one for my car.
(Before you ask, why no parrot or other brand? I was able to get my hands on this one really cheap.)
The only problem I got was the first time I wanted to pair the device. Every time after entering the 4 digit passcode I got a message saying the passcode was incorrect. Instantly, not even trying to connect. After leaving it all alone for 10-15 minutes and I tried to connect again it suddenly worked without any problems. And it's still working with no issues at all.
ROM I use:
SWIFTBL WWE DIAMOND ROM V7.5
OS Version: CE 5.2.20755 (Build 20755 AKU 1.4.0)
Base ROM Version: 1.93.405.1 UK WWE
So.. more succes stories here? Or problems?
Hi
I have the same setup, Nokia CK-7W in my volvo s60 connected to my MDA Compact IV running swiftbldade 7.5.
It all works perfect.
I even have MS Voice command setup with it and it annonuces incoming callers and messages perfectly and voice dialling works perfect as well.
Call quality is very good as well.
Shaks
Hey - I've got my CK-7W working fine too, except I'd like to also enable wireless stereo... but the option doesn't seem to exist... I bought the CK-7W off a friend, and he was able to use wireless stereo, but I cn't - has anyone else had any success...?
Relly something I want for using TomTom, etc...
Hi i have CK-7W car kit and I am having problems getting my Diamond to pair can you please advise how you guys paired your ones?
Can't say anything more than I just used the normal way to pair, go to bluetooth settings, search for device and select the carkit + enter correct passcode.
I did however have some problems in the beginning. It would find the carkit but after entering the passcode it said pairing failed.
But when I tried later again it went without a problem, and it paired everytime without a problem ever since.
I dont think the ck-7w supports stereo audio. There are however apps that can route the audio over the carkit. BTAudio is one called if I remember correctly. That way you can have the tomtom over the carkit, but quality isn't that good really.
And some say that using that audio routing also gives 'problems' sometimes, as in it sometimes seems like there is audio (e.g. the car radio is muted) but you don't hear anything for a few secs. So that can be quite annoying.
hmmm??? My diamond wont even pick up the car kit during the search!
I had some problems pairing in the first place...
Don't try to search for the car-kit using the phone, just have your Diamond on BT visible to others, and the car-kit will try to connect automatically... I think you might need to hold the button on the car-kit down for like 10 seconds for it to search, but definately let the kit find the phone, not the other way around...
I fitted one of these to my brother in law's car the other day. Tested it with my diamond, but i expected it to be cross compatible.
Bit offtopic, but what's the advantage compared with a just as pricy parrot system?
Hi Y'all,
I am using my Diamond with the nokia CK-7W and it works fine as well. Paired up without much fuss....
Riel said:
Bit offtopic, but what's the advantage compared with a just as pricy parrot system?
Click to expand...
Click to collapse
Eh.. none? I find the quality better compared to my old ck3300 parrot carkit. However, this one doesnt have a small lcd display or something. Not that I missed the lcd screen though, but sure was a nice feature.
Best thing about the parrot was that it's possible to put a new firmware on it. Could make them a little bit more 'future-proof'.
Nokia CK-7W with HTC Touch Diamond2, VITO VoiceDialer
Pairing the device was easy. In coming calls are working. Push on the carkit button and I can answer the call.
The problem that I have is that I can't do a voice call. If I push on the carkit button nothing happens. I would have expected that the VoiceDialer app would be started and I could make a voice call. The VoiceDialer app works without bluetooth.
Has anyone an idea how I get voice dialing working?
Remark:
With my pervious cell phone Motorola L6 was this possible. Pushed on the carkitt button, wait on the beep, say the name, when recognized it repeats the name and the number was dialed by the phone.

Categories

Resources