Extended ROM - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

How Can I Unlock Extended Rom?
Thanks

houras said:
How Can I Unlock Extended Rom?
Thanks
Click to expand...
Click to collapse
Yes if you can find it

taiseer999 said:
Yes if you can find it
Click to expand...
Click to collapse
LOL - Good one.

Don't be mean Schap's advanced config DOES give the option to unlock extended ROM which implies that it's actually there - took me ages to realise that the Kaiser doesn't have an extended ROM.... or if it does have one I'll be buggered if I can find and unlock it.

No Ext Rom..........

so you find the carier stuff on the imgfs partition.es ok now to find how to extract that in a useable form.
so were do the carrier addons etc run from, I've had a quick browse of the device and can see nothing usefull. ill try and have a beter poke when I get home but if anyone has any pointers in the mean time

flipside101 said:
so were do the carrier addons etc run from, I've had a quick browse of the device and can see nothing usefull. ill try and have a beter poke when I get home but if anyone has any pointers in the mean time
Click to expand...
Click to collapse
These must be built into the rom - so you may get some hints in the ROM kitchen thread.

When building from a kitchen you can find most of the carrier specific items in the \OEM folder.

Related

Anyone have camera themes?

Anyone have camera themes for 8125?
Madcap180 said:
Anyone have camera themes for 8125?
Click to expand...
Click to collapse
Check the pandora rom thread (my signature) post #2
I see Camera 3.00 as part of your WM6 rom .. do I HAVE to switch ROMs to get it? or is it an addition I can add without having to reflash?
Madcap180 said:
I see Camera 3.00 as part of your WM6 rom .. do I HAVE to switch ROMs to get it? or is it an addition I can add without having to reflash?
Click to expand...
Click to collapse
I couldn't speculate - other than to give it a try - but it'll probably mess up your phone and you'll have to do a hard reset.
I don't know of a cab for this, but maybe someone has one tucked away somewhere - might ping nottoosmart.
If you're wanting the camera TEMPLATES, I've attached a file of some I've found -- including the original ones -- for the 8125.
Thanks Newbie!!

ron999's Kitchen Question Thread.

i have cook up a rom in kitchen and everything is working fine to my likes
but i have one problem
why do i get to drop town menu in Program, Setting ,etc instead of icon
is there a cab am i missing something or do I need to select something in
the Kitchen Package
i am using alex rom which is 3.03
thank you
ron999 said:
i have cook up a rom in kitchen and everything is working fine to my likes
but i have one problem
why do i get to drop town menu in Program, Setting ,etc instead of icon
is there a cab am i missing something or do I need to select something in
the Kitchen Package
i am using alex rom which is 3.03
thank you
Click to expand...
Click to collapse
so, let me just understand, you click Programs, or Settings and, instead of opening something, you get a drop-down menu?
mbarvian said:
so, let me just understand, you click Programs, or Settings and, instead of opening something, you get a drop-down menu?
Click to expand...
Click to collapse
thank for reply
yes that what it does i don,t know if i missed something in the package
thank
ron999 said:
thank for reply
yes that what it does i don,t know if i missed something in the package
thank
Click to expand...
Click to collapse
actually, for some reason, there is a package called QuickMenu, and for some reason it gets included in the ROM even if you don't want it to, so just delete it from your Packages folder, then you should be good
thank mbarvian
i will try it and let you know
thank
ron999 said:
thank mbarvian
i will try it and let you know
thank
Click to expand...
Click to collapse
quickmenu is one of the best (and simplest) applications around. It definitely makes my top ten.
redbandana said:
quickmenu is one of the best (and simplest) applications around. It definitely makes my top ten.
Click to expand...
Click to collapse
i find it rather annoying, lol especially when cooking
Thanks mbarvian
it works well first go, I,ve been pulling my hair out trying to figure it out
once again thank you mbarvian
ron999 said:
Thanks mbarvian
it works well first go, I,ve been pulling my hair out trying to figure it out
once again thank you mbarvian
Click to expand...
Click to collapse
glad u got it working man
good luck cooking
how do I put back image in built Rom in Kitchen
Hi
i need a little help on this image to be put in a Rom that i have made in Kitchen
how do i incorporate this Image to the Rom i am Making in Kitchen so that when i flash the rom the Image pop up
thanks
ron999 said:
Hi
i need a little help on this image to be put in a Rom that i have made in Kitchen
how do i incorporate this Image to the Rom i am Making in Kitchen so that when i flash the rom the Image pop up
thanks
Click to expand...
Click to collapse
i dont realy get it, you want to set this image as the wallpaper? is custsk.exe not really working?
no i mean i built a rom in kitchen and the wallpaper sucks
so i wanted to put this wallpaper in the rom itself so that when a flash the rom it automatic come on instad of the htc one
thanks
ron999 said:
no i mean i built a rom in kitchen and the wallpaper sucks
so i wanted to put this wallpaper in the rom itself so that when a flash the rom it automatic come on instad of the htc one
thanks
Click to expand...
Click to collapse
well, you could just load a different theme that has this background (like empex_diamond.tsk) or you could replace the htc background. if you wanted to venture down the second path, i forget what file youre looking for, so i can only help you out with the first method
thanks again mbarvian replying
ron999 said:
thanks again mbarvian replying
Click to expand...
Click to collapse
ok sure no problem..
did you figure it out and get it working?
can someone please explain why i having kitchen Problem
i am trying to build a rom and having this error messege
"ERROR building BOOT hv"
am i missing something or do i need to install something
i ve already installed dotnetfx the funny thing everthing was working fine a 3 months go
thanks
your first problem is youdidnt mention which kitchen
sd73ta said:
your first problem is youdidnt mention which kitchen
Click to expand...
Click to collapse
hi thanks for reply it "Kitchen 01_20_08"
thanks
this what it say in the error log
Microsoft (R) RGUComp Version 1.0.000
Registry file processor and hive builder.
Copyright (C) 2004 Microsoft Corporation All Rights Reserved.
built: Nov 19 2004 15:17:13
BuildBootHive: (RGUComp) !ERROR unable to mount hive file ".\boot.hv"
wmain: (RGUComp) !ERROR failed building BOOT hive
thanks
need a little help in kitchen with battery inicater
i have built 6 test roms and i still can,t get the battery indicater icon on top of the screen next to speaker icon can someone please tell me which cab do i need or what to select in the kitchen
i am use rom 3.03
thank you

Blackstone 20757 Cooking Base

Well, b16b PM'd me and asked if I could port the Touch HD ROM to the Kaiser. So I did. I used the recently released 3.34.721.2 as a base to port the XIP and SYS folders (the OEM is from 3.34.721.2). All the folders are included in the .rar package (OEM, ROM, and SYS). I changed all of the 192_DPI folders in the SYS with the coorresponding 96_ DPI folders from the 3.34 base. Other than that, these are straight ports. NOTHING HAS BEEN REMOVED. You will need to clean the ROM yourself.
Happy cooking.
http://www.4shared.com/file/69329178/c309d4a7/KAISER_334_BASE_TOUCH_HD_PORTpart2.html
http://www.4shared.com/file/69329177/53b6c936/KAISER_334_BASE_TOUCH_HD_PORTpart3.html
http://www.4shared.com/file/69329179/b40ee431/KAISER_334_BASE_TOUCH_HD_PORTpart1.html
Please mirror if you are able. This way everyone gets a chance to try it out.
NOTES:
furb3t said:
You must also change in \SYS BT's driver, because blackstone have a different way to use its BT.....
Click to expand...
Click to collapse
MIRRORS:
http://rapidshare.com/files/163177031/KAISER_334_BASE_TOUCH_HD_PORT.zip
hehehehehe
my friend you are magician
thank you very much.. nice work..
No problem. I tested it out and didn't notice any problems. Again, it's a "full" base. All the OEM apps, SQM, etc. are still in, so you'll have to remove them manually. Enjoy.
great job KMFM$! I will try this out ASAP!! What HardSPL would you recommend?
KMFM$ said:
Well, b16b PM'd me and asked if I could port the Touch HD ROM to the Kaiser. So I did. I used the recently released 3.34.721.2 as a base to port the XIP and SYS folders (the OEM is from 3.34.721.2). All the folders are included in the .rar package (OEM, ROM, and SYS). I changed all of the 192_DPI folders in the SYS with the coorresponding 96_ DPI folders from the 3.34 base. Other than that, these are straight ports. NOTHING HAS BEEN REMOVED. You will need to clean the ROM yourself.
Happy cooking.
Click to expand...
Click to collapse
You must also change in \SYS BT's driver, because blackstone have a different way to use its BT.....
Knumb said:
great job KMFM$! I will try this out ASAP!! What HardSPL would you recommend?
Click to expand...
Click to collapse
I suggest cmonex's 3.29 Hard2 SPL. You can also use jwocky2000's HardSPL's, but I suggest you check out cmonex's.
furb3t said:
You must also change in \SYS BT's driver, because blackstone have a different way to use its BT.....
Click to expand...
Click to collapse
Thanks for the info, furb3t. I'll update the first post.
KMFM$ said:
Thanks for the info, furb3t. I'll update the first post.
Click to expand...
Click to collapse
the new link don't working.. chek it
b16b said:
the new link don't working.. chek it
Click to expand...
Click to collapse
I just updated the first post with the information. It would be easier for the chef to dump 3.34 and replace the 20757 BT files in SYS with the 3.34 BT files. Swap those out, G'Reloc, and you should be good to go. Easier than waiting for me to update and upload all three parts again.
Though, if enough people have problems, I may do it.
KMFM$ said:
I just updated the first post with the information. It would be easier for the chef to dump 3.34 and replace the 20757 BT files in SYS with the 3.34 BT files. Swap those out, G'Reloc, and you should be good to go. Easier than waiting for me to update and upload all three parts again.
Though, if enough people have problems, I may do it.
Click to expand...
Click to collapse
when is UP the new one.. tell me...
thanks
Can u tell me how to replace the BT file from 3.34 SYS Folder ... Can u give the file name i need to work on it ... thx so much ...
KMFM$ said:
I suggest cmonex's 3.29 Hard2 SPL. You can also use jwocky2000's HardSPL's, but I suggest you check out cmonex's.
Click to expand...
Click to collapse
Thanks bud. I haven't been on in a bit due to the fever but I got one slight problem. All I did was create a rom with your items, added no packages, but the calculator doesn't work. Screw up by me? Weird....Right now I am trying to go through the folders to make it a bare rom; without all the bloatware crap. TIA...
Update Soon...
Knumb said:
Thanks bud. I haven't been on in a bit due to the fever but I got one slight problem. All I did was create a rom with your items, added no packages, but the calculator doesn't work. Screw up by me? Weird....Right now I am trying to go through the folders to make it a bare rom; without all the bloatware crap. TIA...
Click to expand...
Click to collapse
Well, I'm going to go through this build and clean it up for people (a la akadonny's 'Supa-Clean' builds). I hear the bluetooth needs to be fixed, so I'll look at the calculator issue while I'm going through the build.
I'm going to try and work on it tonight, but I cannot make any promises. I'd say look for an update sometime this week.
Looking forward to it...
KMFM$ said:
Well, I'm going to go through this build and clean it up for people (a la akadonny's 'Supa-Clean' builds). I hear the bluetooth needs to be fixed, so I'll look at the calculator issue while I'm going through the build.
I'm going to try and work on it tonight, but I cannot make any promises. I'd say look for an update sometime this week.
Click to expand...
Click to collapse
Hey KMFM,
I'm really looking forward to a 'Supa-Clean' build of this. It's great to be able to load what you want. I'm just stepping into this world of ROM cooking so i'm still learning (I read, read, read, try, try, try and read some more) and would like to have this (supa-cleaned) as my base.
thank you and all others who have contributed to this addicting world of cooking here at XDA
I have already clean up this rom for chief ... anything ok except BT issue ... can u repack the replace bt file only for me for cook my chief rom ... cos i don't know what file need to be replace
And what should I do to change the BT driver?
htcfranco2 said:
I have already clean up this rom for chief ... anything ok except BT issue ... can u repack the replace bt file only for me for cook my chief rom ... cos i don't know what file need to be replace
Click to expand...
Click to collapse
a.s.j said:
And what should I do to change the BT driver?
Click to expand...
Click to collapse
I'm going to have to take a look at the base and compare to the Blackstone ROM to figure out what precisely needs to be switched out. I should have time Thursday to look at it. Barring any more distractions, of course.
KMFM$ said:
I'm going to have to take a look at the base and compare to the Blackstone ROM to figure out what precisely needs to be switched out. I should have time Thursday to look at it. Barring any more distractions, of course.
Click to expand...
Click to collapse
Thx. your Workhard...Keep Going...
I also ask other chief to figure out ...
KMFM,
First off, nice contribution!
I was looking inside each RAR file you posted and didn't realize what is different. Can you please clarify?
I cooked already and is working fine. I just missed most icons under System and Connections tab like GPRS, HSDA, Backlight, etc.
It generally happens when I move between different XIPs and SYS packs.
But under my latest one using XIP 757 from Blackstone mixed with 758 SYS pack, it doesn't happen. How's that? Any idea?
thanks a lot!
Cheers
epimazzo said:
KMFM,
First off, nice contribution!
I was looking inside each RAR file you posted and didn't realize what is different. Can you please clarify?
I cooked already and is working fine. I just missed most icons under System and Connections tab like GPRS, HSDA, Backlight, etc.
It generally happens when I move between different XIPs and SYS packs.
But under my latest one using XIP 757 from Blackstone mixed with 758 SYS pack, it doesn't happen. How's that? Any idea?
thanks a lot!
Cheers
Click to expand...
Click to collapse
Well, you need each rar to complete the archive. I split the archive so that the file sizes were small enough to attach directly to the site. So even though one file looks like the whole thing, you need all three to successfully extract the archive.
As to your question about the icons, that's weird, because I've found those icons to be controlled by mxipupdate_HTC_*.provxml ( I cannot remember the full name). Look for it in OEM\OEMApps or OEM\OEMDrivers, I think it's in one of those folders.
i have replace all the BT folders and working great to me..
only to issues the activesync running in background and when i'm in simple Gprs area i don't have the G but this angle <-X-> but i have found fix for this.. i trying to find for activesync now..

I need the 21109 ROM folders.

I cant get any of the extracts working. Who has the ROM folders for 21109. I need it to continue working on my ROM. PLEASE HELP. I would really really appreciate it ive spent the past 3hours googling and asking around to no luck. =[ Thanks
Best Regards
-TheParadox
one word:
Anryl.
lol that does not help. How about a link
He doesnt have the latest build 6.1 anywere. I dont want a ROM I want the folders. Example OEM,SYS and what not >.<
TheParadox said:
He doesnt have the latest build 6.1 anywere. I dont want a ROM I want the folders. Example OEM,SYS and what not >.<
Click to expand...
Click to collapse
Which kitchen are you using?
Alex's.
(Sorry message has to be a certain length so added this random tidbit.)
TheParadox said:
Alex's.
(Sorry message has to be a certain length so added this random tidbit.)
Click to expand...
Click to collapse
I'll see what I can do. I use bepe's new kitchen so the folders aren't entirely compatible with Alex's kitchen but I can get them in shape for you if you can wait a day or so. Let me know.
Sounds good to me. Thanks so much.
http://rapidshare.com/files/178519372/payload_uldr_21109.rar.html
http://rapidshare.com/files/211226775/SYS21109.7z
anryl said:
http://rapidshare.com/files/178519372/payload_uldr_21109.rar.html
http://rapidshare.com/files/211226775/SYS21109.7z
Click to expand...
Click to collapse
See? I told you... "Anryl"
We are ROM cooking junkies and Anryl is our dealer.
You can also get it from my kitchen (which i got from anryl ) at www.mobilemodcentral.com/kareem . I've been really lazy to officially release my kitchen but i'll get there.
kareem9nba said:
You can also get it from my kitchen (which i got from anryl ) at www.mobilemodcentral.com/kareem . I've been really lazy to officially release my kitchen but i'll get there.
Click to expand...
Click to collapse
Anryl and Kareem, thanks for helping him out. I just haven't had any time to do this.
Thanks so effing much. I appreciate it! Will donate to Anryl soon as I get the cash comming in. xD
kareem9nba said:
You can also get it from my kitchen (which i got from anryl ) at www.mobilemodcentral.com/kareem . I've been really lazy to officially release my kitchen but i'll get there.
Click to expand...
Click to collapse
Release that kitchen!!! I an anxious to try it out kareem!
Sorry I must be such a noob. So I rename the 20119 Folder to SYS right? How do I make the OEM and ROM folder? Like Idk what to do from here. Helpp.
Knumb said:
Release that kitchen!!! I an anxious to try it out kareem!
Click to expand...
Click to collapse
I will, i've just been super lackadaisical in doing so
@ TheParadox, it should come with a SYS and ROM folder (XIP in the ROM folder). Which link are you using?
Anryls. Hmmm I dont understand some of this. Thanks for helping. Any ideas?
Any way you could repack it for me and upload? With the correct OEM SYS and ROM folder?
I got it all working and got it to cook. Flashed my rom....Doesnt boot lags out on the bootscreen. Help?
xip , wince.nls , custsat
xip - the red lines not dim
wince.nls - redlines dims no OS
use my payload try again
or report xip to official payload with xipporter till rev-35 for old kitchens
in new kitchen (bepe) do not remove txt from msxipkernell if u port xipport xips
if u using my kitchen then try to do it on latest official (21032) its all there ROM SYS OEM
TY

[Q] Incorporate Active Display in Custom roms

Hey anybody!
So i've pretty much looked all around, this stuff is scarce.. Could anybody outline the steps for adding active display to your custom rom? I'm already familiar with all the unpacking of apks and jar files, so you don't need to go that far back, just which exact files to edit and in what manner?
the "ChameleonOS" team gave much of the code needed here "http://forum.xda-developers.com/showthread.php?t=2450697" but not much word on how to integrate it in.. I think if someone made a tutorial on this, that'd be awesome.
Thanks
dcutz said:
Hey anybody!
So i've pretty much looked all around, this stuff is scarce.. Could anybody outline the steps for adding active display to your custom rom? I'm already familiar with all the unpacking of apks and jar files, so you don't need to go that far back, just which exact files to edit and in what manner?
the "ChameleonOS" team gave much of the code needed here "http://forum.xda-developers.com/showthread.php?t=2450697" but not much word on how to integrate it in.. I think if someone made a tutorial on this, that'd be awesome.
Thanks
Click to expand...
Click to collapse
It has to be intergrated while building from source.
atrix2man said:
It has to be intergrated while building from source.
Click to expand...
Click to collapse
can't you just add it in? like modify the framework and stuff?
dcutz said:
can't you just add it in? like modify the framework and stuff?
Click to expand...
Click to collapse
Maybe..if u knew what you were doing..it would be really hard

Categories

Resources