hey, so i'm planning to flash my vox but i wish to back up the original rom so if anything i can flash it back to it. Is there a thread or a set of instructions i could follow that'll give me the method of doing this. any help would be appreciated, thanks!
Related
Hi!
Is there any tutorial around how to dump a complete kaiser (in order to send it in for guaranty-repair)?
I have a second one with original bootloader, ROM, Radio etc... -> whats the best way to turn my flashed Kaiser into an original one again?
thx for your efforts and sorry if this question is redundant...
licht77 said:
Hi!
Is there any tutorial around how to dump a complete kaiser (in order to send it in for guaranty-repair)?
I have a second one with original bootloader, ROM, Radio etc... -> whats the best way to turn my flashed Kaiser into an original one again?
thx for your efforts and sorry if this question is redundant...
Click to expand...
Click to collapse
Well At leat you appolgized for the redundancy...
Check the first thread, it has everything you need.
From Dumping a ROM, to Rebuilding a dumped ROM (If you want to flash to your original)
As far as warranty exchange goes. There is a section for reverting to the original SPL, then flash the original ROM, and it's all set.
Once again, check the first Thread, G.W.E.N.I. has all the answers
XC
http://forum.xda-developers.com/showthread.php?t=335568
Thanks a lot for the answers - as for my apologies for the stupid post ill share my dumped original ROM as soon as possible as others contacted me for that just this moment...
Hm ok its not THAT easy... actually i am getting stuck while playing around with the Kitchen in order to get align with the steps of the mentioned guide... (dumping to the 4 raw parts is ok... but how to get to an nbh file for nbhextract?)
Any hints / help is highly appreciated (I can supply the 4 raw files if needed)
Upload it & I'll reconstitute for you. Otherwise follow the directions in the "How to rebuild dumped roms". http://forum.xda-developers.com/showthread.php?t=337066
licht77 said:
Hm ok its not THAT easy... actually i am getting stuck while playing around with the Kitchen in order to get align with the steps of the mentioned guide... (dumping to the 4 raw parts is ok... but how to get to an nbh file for nbhextract?)
Any hints / help is highly appreciated (I can supply the 4 raw files if needed)
Click to expand...
Click to collapse
Thx for your effort! I sent u the link to the raw files via PM...
Without HardSPL installed, if you upgrade your ATT Tilt to ROM 1.93, you could not down grade back to 1.56. Well, for some reason, my phone wouldn't boot with 1.93 so I needed to go back to 1.56. When I tried, I got an error that was something like invalid vendor ID. So, instead I flashed the ATT Test rom. After that, I was able to flash 1.56. For me, this was a great find. Maybe it Will help someone else later.
where can i get the original ATT Tilt to ROM 1.56.
I want to restore my tilt to the factory settings.
please help.
ricomilion said:
where can i get the original ATT Tilt to ROM 1.56.
I want to restore my tilt to the factory settings.
please help.
Click to expand...
Click to collapse
well you could start by reading this thread right here:
http://forum.xda-developers.com/showthread.php?t=335568 this way you can see how people have done and what issues some people might be running into. Plus you can post whatever issues you have over there.
and for just the instructions consult the wiki:
forum.xda-developers.com/archive/index.php/t-335568.html
It has pretty much all info you need to revert back to stock rom and spl for warranty/exchange purposes or simply if you want to go back to att crap.
good luck.
thesire said:
well you could start by reading this thread right here:
http://forum.xda-developers.com/showthread.php?t=335568 this way you can see how people have done and what issues some people might be running into. Plus you can post whatever issues you have over there.
and for just the instructions consult the wiki:
forum.xda-developers.com/archive/index.php/t-335568.html
It has pretty much all info you need to revert back to stock rom and spl for warranty/exchange purposes or simply if you want to go back to att crap.
good luck.
Click to expand...
Click to collapse
Thanks very help full.
So im new to these phones and stuff and i watched a video on youtube on how to flash wm6.1 to my tmobile wing. I got all the way through it untill i got to one part and it says something about my utility update is wrong. Awhile back i downloaded the rom version 4.26.531.1 off of tmobile.com. Could that be my problem? Any help would be greatly appreciated. Thanks
did you make sure to hardspl before trying to flash a custom rom? u must do that before flashing just use the xda search engine for hardspl and do that then try to flash again that should do the trick hope that helped
A quick search will always give you answers. Or, you can always take a look at the wiki. http://wiki.xda-developers.com/index.php?pagename=HTC_Herald
Hi guys,
nice work from JockyW, ookba and everyone doing the job to bring us excellent software (pls if i forgot anyone, don't be mad ). I really appreciated the RUU_MAPL_3VOLUTION_WM65_3VO.2.50.112509 for a long time but I will sell my Maple now. It time to move on and try something new. Thats why I need to go back to the Official HTC ROM. I just cannot get it to work...
Obviously just flashing the original HTC Rom won't do the job because of the Hardspl, but how do i get around this. I just need some help on going back.
Thanks in advance, UKFencer
160 hits and nobody got an idea...? Or is the answer too simple?
If i am missing something pls point me to it.
Thanks,
UKFencer
Sorry, I don't think I have any idea. I *think just flashing the original ROM should work, I have upgrade/downgraded other phones with factory/custom roms with no problem. I have a question on top of yours. If I don't Hard SPL, what do I lose? There's a thread about downgrading the HardSpl to 1.19 or 18, I don't know if that helps. I would like an answer to my AT&T question as well. Sorry about hijacking your topic but I at least bumped it.
Download original rom in HTC website. Thats all.
Or you could use goldcard model to flash back to original WWE ROM
alinkwok said:
Or you could use goldcard model to flash back to original WWE ROM
Click to expand...
Click to collapse
where can i get that?
Sorry, for not replying any earlier, but was finishing my finally year project...took longer than i thought...anyway now i back to re-install the original firmware...
@Sonnguyen
doesn't work because of HardSPL...tried it.
@alinkwok
yeah, i've read about it...without a seccond mobile, i'll have to buy the software if i recall correctly.
So, any other tips where to look for howtos...?
UKFencer
Have you ever imagined looking into Wiki
If I were your Maple buyer I would apreciate more to have it upgraded to a cooked ROM, rather to have ugly stock.
You can go back and install any ROM you want
orb3000 said:
Have you ever imagined looking into Wiki
If I were your Maple buyer I would apreciate more to have it upgraded to a cooked ROM, rather to have ugly stock.
You can go back and install any ROM you want
Click to expand...
Click to collapse
Yes, I agree with your sentiments regarding the ROM, point is however that once the custom ROM is flashed with the Hardspl, the original ROM cannot be flashed back, which is sometimes required, especially if something happens to the phone and it has to be returned for repairs etc to the retailers.
Strange, it´s the 1st time I know that an HTC device can´t go back to original ROM...
I´ll do some research...
The original SPL is included in the package you downloaded from here..... Just have to use it, flash original rom, and you are on your way....
How exactly do I flash the original spl nbh file? I tried replacing the hard spl nbh with the original and running RUU but the spl remained the same.
you need to get the one from here: http://forum.xda-developers.com/showthread.php?t=558003
there is a folder marked original spl in there. it is the same process you did when you put the hard spl on there, just using the original nbh
Guys,do i need to flash to stock rom if i want to send my Touch Pro for warranty? My keyboard (space and backspace button) isn't working anymore..
if yes,how do i do it?i read here at http://forum.xda-developers.com/showthread.php?t=410150 but i couldn't understand fully. How do i get the stock OS and radio? can someone please explain to me..what are the things to download and i'd appreciate it if someone can give me the links for the downloads..thx..
bumpp..help anyone?
Hi one1002
If you have a branded device you should be able to get a stock rom form the website of your provider.
Else you can download it directly from HTC (http://www.htc.com/www/SupportDownload.aspx?p_id=140&cat=2&dl_id=501)
After having flashed the stock ROM you need to load a stock radio (I don't know but it's possible that this is included in the stock-ROM (just look for the term "radio" in the filename of the downloaded stock-rom; if you find it it should be included...) if not you will find one here http://forum.xda-developers.com/showpost.php?p=2822877&postcount=2
In the end you will have to flash the original SPL. You'll find all the information and files needed at the end of the first post here http://forum.xda-developers.com/showthread.php?t=410150 (start with step 1 at "STEP BY STEP HOW TO RETURN TO STOCK SPL")
And if everything else fails: http://lmgtfy.com/?q=site:xda-developers.com+raphael+stock
Good Luck
Preggy