One day i brought the new lcd(parts no:60h00075-00m) from ebay ! So i need to test the lcd good or bad,then i dismount my original lcd(parts no:60h00050-00m) to test the new lcd ,but when i put back the original lcd it doesnt work !!! so i try the new lcd with my treo 750 ,it works! Whats the problem in it? but i saw the original lcd havent break the flex cable! hope all of u can understand what i saying and can help me to solve ....thx
Related
Hello,
unfortunately my prophet did't like the way I fell on him and the screen crashed.. I think, that it's only the touchscreen (if I turn the prophet on, I can see all clearly).
Can someone explain me, who to replace the touchscreen (I could bye one for about 8$ at ebay)? ..Or can you give me a good adress, where I can get it fixed (in Germany..)?
Thanks for help, Dirk
Hi.
First of all, you need to buy a new Touch Screen :
http://cnn.cn/shop/dopod-818828838838pro-touch-screen-p-1292.html
After having removed the 4 screws, I advise you to use a card (e.g. credit card) to slip it along the parts to be removed. It is necessary that you pay attention to the 'Speaker buzzer' which has a very small wire.... be careful not to tear it off !
You can have a look here : http://www.bess.free.fr/qtek9100.pdf
Good Luck. I've done it you can can do it... it is difficult to weld the new screnn !!
Bap
Alright.. thank you, I hope I can do it..
Do I need all the tools? ..where can I get them from?
The LCD is one unit, isn't it? How easy is it to separate the touchscreen from it?
The Prophet is about the same?!
Greets, Dirk
HI.
1/ The Prophet is quite the same
2/ you don't need all the stuff but, you will need a plastic card and the good screw driver (T6)
I think you've broken just the LCD Touch part and not the light background thing so you will have to separate the two parts and changed the LCD Touch screen
Let me know how is it goin'. GD luck,
Bap
Hey everybody, Cracked the screen on my 750. Everything still works OK except for the touchscreen. I'm trying to get a replacement off of eBay, but I'm not sure what to buy.
Can anybody tell me what "other" screens are compatible with the Treo 750 (ATT/Cingular).
I'm guessing that the 700W, 700WX and 755 all will work. Can anybody verify this or give me direction where I can verify for myself ??? Will any others work?? 650, 680, 700P??
Thanks a lot.
P.S. Thanks to everybody for the WM6 stuff. I have it on my desktop computer waiting 'till I get the screen fixed before I do the install........(CHEEIMG.nbh)
unkabuzz said:
Hey everybody, Cracked the screen on my 750. Everything still works OK except for the touchscreen. I'm trying to get a replacement off of eBay, but I'm not sure what to buy.
Can anybody tell me what "other" screens are compatible with the Treo 750 (ATT/Cingular).
I'm guessing that the 700W, 700WX and 755 all will work. Can anybody verify this or give me direction where I can verify for myself ??? Will any others work?? 650, 680, 700P??
Thanks a lot.
P.S. Thanks to everybody for the WM6 stuff. I have it on my desktop computer waiting 'till I get the screen fixed before I do the install........(CHEEIMG.nbh)
Click to expand...
Click to collapse
You have to buy a 750 or 680 screen the other screens just dont fit.
I've bought this one http://cgi.ebay.com/LCD-Digitizer-T...ryZ41343QQssPageNameZWDVWQQrdZ1QQcmdZViewItem just a complete screen with touchscreen, screenguard and screwdrivers.
Thanks for the reply. Did you install it already? Did it fit and function well ? Was it installed on a 750 ??
Thanks again......
Treo 750 screen resolution is 240 x 240
Treo 680 screen resolution is 320 X 320
i dought 680 screen wiil work on 750 as Windows mobile 5 dose not support 320x320 but WM6 dose so u might be lucky !!?
ifit work cen u post a picture of it and somr feed back as well ?
i did one palm this yea
700wv is same as 650.
wizzard cheetah same screen.
Gave a retail repair shop 650 told them that it would fit a 700 from sprint didn't work and when i got the palm back screen was burned out. 700 worked still just cracked. I since then have held onto the plam treo 650 to analize it. It is very different from the others. I just got a 700wv and from the looks of it im am staring at a 650 cingular phone so i would have to say that windows can be put on symbian?????????
be back later
650 burnt out in
OK, here's what I found out from Palm. The 700W, 700WX, 750 and 750V are all compatible. These are all Windows Mobile OS. Palm OS will not work on Windows phones.
I asked about the possability of using a 320 X 320 screen if I update to WM6 and they said that even though WM6 supports a 320 X 320 res. screen, the 750's hardware will only support 230X 230.
I ordered a new screen (700W) off of eBay for $45.00 I will post any info/ pictures that I can about the installation when I get to that point......
OK, I had to do the install away from home, and I forgot the camera so no pictures. I used the "youtube" videos for 680 (same body style) and the 700W (same screen). Neither of them was exactly the same, but I got the jist of it from both.
I'm not 100% sure, but it seems that you do not have to disconnect the motherboard on the 750 to replace the screen. 2 things that gave me trouble were rubber pieces that "fell out" during the process. One under the ringer on-off switch and the other was inside the case where the stylus slides in. (took a while to figure out where they came from)
After installation I had trouble with the backlight going off, but while messing with the battery advanced functions it suddenly came on and is fine now.
Feels very comforting to get my touchscreen back.
Now for "CHEEIMG.nbh"
680 and 700 repair videos on youtube are from "PDAparts.com" at this link.
http://www.gethightech.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=RD
Good luck ......................
thx, i find the video in youtube is very useful
EDIT:
I know this won't change your life or similar, but i'm happy to inform you that i've replaced my broken LCD with one i bought on eBay (from vendor shop-uk)!!! My wizard is alive and kicking again!!!
Small info for those of you with the same problem:
Be aware that there are two different version of the LCD component for our wizard:
- Samsung LTP280qv-e01 (HTC part no. 60h00032-00) a.k.a. First Gen, a.k.a. gold cable ('cos the connector's color is orange/gold)
and
- Toppoly TD028STEB1 (HTC part no. 60h00037-00) a.k.a. Second Gen, a.k.a. black cable (connector's color black)
THE TWO ARE NOT INTERCHANGEABLE!!! If you need to buy a new LCD disassemble the old/broken one first, and check the serial number. Then order the replacement you need.
Bye ALL!!!!
-------------------------------------
Hi all,
my wizard hit the ground, literally (sigh!) and now the lcd is broken, so sad. The phone still works though, and i'd like not to buy another phone, i'm in love with my vario too much!
Do you know where can i find a new LCD to replace the broken one? Is it too hard to replace the screen? Or so you think i should definitely abandon my beloved and buy a new phone?
Your suggestions will be highly appreciated, i'm so sad
Bye
Isidoro
risidoro said:
Hi all,
my wizard hit the ground, literally (sigh!) and now the lcd is broken, so sad. The phone still works though, and i'd like not to buy another phone, i'm in love with my vario too much!
Do you know where can i find a new LCD to replace the broken one? Is it too hard to replace the screen? Or so you think i should definitely abandon my beloved and buy a new phone?
Your suggestions will be highly appreciated, i'm so sad
Bye
Isidoro
Click to expand...
Click to collapse
Oh man so sorry to hear about the damage to your Wizard. Ebay will have what you need not sure about costs or how to replace the LCD but I believe the instructions for replacement are here in the forum somewhere. A quick search should uncover them.
I quickly looked out on Ebay and found screens for $32.99US plus $7.99US shipping not sure about getting the item to Italy but at least you have an idea of the cost.
Good Luck,
Kirby
Hello,
I have an Imate Ultimate 8150 which was dropped and the screen never came on after that. I opened the phone and found out that the LCD connector was torn in the middle. Can anyone help me with this one?
Where can i find the small cable that connects the LCD to the logic board. the LCD model is TD026TTEA1. I am also attaching picture for reference. I Need this little broken cable, Can anyone tell me where can i find it.
Thanks
LCD Strip
Hello Dear I am also facing the same problem I have this FPC Strip but its burnt also attaching the pictures .My phone is working without LCD Connection if anyone can help to find out this strip or someone having 8150 dead phone plz contact.
Hello everyone
My Diamond really needs a new housing and digitizer.. I have replaced screens and other stuff on other HTC phones many times (Universal, Prophet, S710 and so on) but what i havent tried before is replacing a digitizer. If i understand correctly isnt the digitizer the sort of small panel over the LCD screen that is used for the Touch to worK?
Im just worried that its too tricky for me to replace that. Anyone that has tried this before and can tell me if its difficult ?
Da9L said:
Hello everyone
My Diamond really needs a new housing and digitizer.. I have replaced screens and other stuff on other HTC phones many times (Universal, Prophet, S710 and so on) but what i havent tried before is replacing a digitizer. If i understand correctly isnt the digitizer the sort of small panel over the LCD screen that is used for the Touch to worK?
Im just worried that its too tricky for me to replace that. Anyone that has tried this before and can tell me if its difficult ?
Click to expand...
Click to collapse
you can get tutorial Replacecement at http://www.mikechannon.net/page1.html
Hakim Rahman said:
you can get tutorial Replacecement at http://www.mikechannon.net/page1.html
Click to expand...
Click to collapse
thanks
Winmobile
Is there android for our Diamond?