Tested it on my device (hurricane and QTEK9100) worked like a charm. Also worked perfectly on my sisters Samsung I620
Maybe something for the peeps here
work in tornado??
spring777 said:
work in tornado??
Click to expand...
Click to collapse
Pls try it
http://forum.xda-developers.com/showpost.php?p=1835715&postcount=45
It's not working on Tornado... :/
Anyone know if this'll work on the MotoQ? (original CDMA Sprint, not Q9, etc)
has anyone tried this on a Vodafone VDA GPS (aka Toshiba Portege G710)?
2 Gigs are just not enough.
youser said:
has anyone tried this on a Vodafone VDA GPS (aka Toshiba Portege G710)?
2 Gigs are just not enough.
Click to expand...
Click to collapse
The attached driver just works fine for high capacity SD cards (SDHC) on the VDA GPS.
I run a 8 GB card in it.
tuo_kaerf said:
The attached driver just works fine for high capacity SD cards (SDHC) on the VDA GPS.
I run a 8 GB card in it.
Click to expand...
Click to collapse
Hi
can someone tell me if there is no risk to use this file on a G710 ?
I'm not what we can call a specialist ...The last time I used such a file , My Wm6 crashed ...my phone couldn't boot ...it was blocked on Toshiba logo...
luckily my phone was still under warranty
Thanks
pitzo123,
the VDA GPS is identical to the Toshiba G710 and YES, the driver 100% works fine. Try it out and enjoy.
thanks a lot tuo_kaerf .... works very fine on my Toshiba portege g710 with a kingston microsd sdhc 4 go and 8 go
The driver (from post #8) works on Toshiba G710.
But I see only 4GB of my 8GB card (Transcend microSDHC 8GB Class 6) (not only in SystemInfo, also in File-Explorer files are missing... )
Does anyone have a solution for this?
mmaki said:
The driver (from post #8) works on Toshiba 710.
Click to expand...
Click to collapse
That's good
mmaki said:
But I see only 4GB of my 8GB card (Transcend microSDHC 8GB Class 6) (not only in SystemInfo, also in File-Explorer files are missing... )
Does anyone have a solution for this?
Click to expand...
Click to collapse
Try to reformat the card in the device...
Does it help?
hmmm... how can I do this on wm6? Google could not help me... I've found only 3rd party tools that can format SD on wm6... or have i overlooked something im wm6?
regards mmaki.
mmaki said:
hmmm... how can I do this on wm6?
Click to expand...
Click to collapse
Download any formatting tool...
Ok, thanks for your reply...
I've tried tree different tools (some shareware), different Cluster-Sizes, full format, low-level-format...
all without success...
any suggestion?
mmaki said:
any suggestion?
Click to expand...
Click to collapse
You either have wrongly installed the SDHC driver or your card is broken.
Have you tried reading a different card?
mmaki said:
But I see only 4GB of my 8GB card (Transcend microSDHC 8GB Class 6)
Click to expand...
Click to collapse
I guess I now understood you problem correctly!
This is just a visual thing, because the application most likely cannot handle large SDHC cards! This does NOT mean, you cannot copy, move or access the card in any way. It works and you also can put data on the card, although the applications cannot properly show the disk usage.
Don't worry about that!
This is the same thing with quite any other device on the market, being developed about 2-3 years ago, which the G710 is.
I double-checked my System-Info and with me, it also only shows a 4 GB card (addressable of about 3.6 GB), which in return is used by 83%.
This is wrong information, because the card actually is a 8GB, just wrongly displayed. I filled the card until 12 MB was being left and - suprise, surprise - I can access it as 8 GB card with full content
So, as I said above: "Don't worry, be happy".
Tried installing the Kahuna SDHC Support Kit for windows mobile (HTC s620) and it disabled my wireless. Uninstalled it and wireless could be enabled again.
Any thoughts on this ?
mtranda said:
Tried installing the Kahuna SDHC Support Kit for windows mobile (HTC s620) and it disabled my wireless. Uninstalled it and wireless could be enabled again.
Any thoughts on this ?
Click to expand...
Click to collapse
Why haven't you installed the given proper SDHC driver from my linklist above, but a strange one? Try my link instead and it works wonderfully...
Related
Dear All,
I recently bought a Sandisc 1GB SD Card for the XDA II (Himalaya) and ever since then, (in a span of about 2 weeks); my phone had to be hard reset 6 times! Is there anyway to prevent this or any solution to this problem? I have been using a 128MB card for nearly 1.7 years in the XDA and never had even one hard reset but suddenly after changing cards, I have had this problem. Would greatly appreciate any solution/idea/suggestion. Thank you.
Cheers, Vikas.
mate, xdaII can only accomodate 512 MB of storage card. thats all i know.
jlahing said:
mate, xdaII can only accomodate 512 MB of storage card. thats all i know.
Click to expand...
Click to collapse
I don't think it's really accurate what ur saying,I have a 1GB in my Himalaya MDAII for about 3 months now....and it's running more than perfect... :wink:
@vikasmal:I donno if the SD is the what's causing u those hard resets...but anyway,have u tried formatting it FAT not FAT32?
Try then let me know.....
RAGO :lol:
not very helpful, but i have been using a PNY 1GB SD card in my xda2 for over 6 months without a hitch, the only thing that has caused mine to require a hard reset is some programs, trick is to install a new program then see how it runs for a few days before installing any others.
might be worth trying a different make of SD card if you know anyone that is willing to lend you one. a few mates have used cheaper ones that have caused quite a few problems, not sure what though.
Hi, thanks for your reply Formatting this in FAT, how should I do that? With my XDAII on the USB cradle or with a card reader?
Sorry for the silly question but am a little lost on this.
Thanks.
Vikas.
RAGOv said:
jlahing said:
mate, xdaII can only accomodate 512 MB of storage card. thats all i know.
Click to expand...
Click to collapse
I don't think it's really accurate what ur saying,I have a 1GB in my Himalaya MDAII for about 3 months now....and it's running more than perfect... :wink:
@vikasmal:I donno if the SD is the what's causing u those hard resets...but anyway,have u tried formatting it FAT not FAT32?
Try then let me know.....
RAGO :lol:
Click to expand...
Click to collapse
Thanks but the 1GB seems to work fine for a few days and then hard reset. Then ok for a few days and again hard reset.
:-(
Cheers, Vikas.
jlahing said:
mate, xdaII can only accomodate 512 MB of storage card. thats all i know.
Click to expand...
Click to collapse
Thanks Macca,
Maybe its the brand but thought Sandisk was a good one :-(
Haven't installed any new programmes other than the ones I was already using on my 128MB card. So that is why am quite puzzled.
Cheers, Vikas.
macca said:
not very helpful, but i have been using a PNY 1GB SD card in my xda2 for over 6 months without a hitch, the only thing that has caused mine to require a hard reset is some programs, trick is to install a new program then see how it runs for a few days before installing any others.
might be worth trying a different make of SD card if you know anyone that is willing to lend you one. a few mates have used cheaper ones that have caused quite a few problems, not sure what though.
Click to expand...
Click to collapse
vikasmal said:
Formatting this in FAT, how should I do that? With my XDAII on the USB cradle or with a card reader?
Click to expand...
Click to collapse
Hi vikasmal...
put ur SD in a memory card reader,then on ur pc/my computer/SD reader label(X),right click and choose format,then in the window menu that appears choose FAT (FAT32 is default),u won't get lost,it's easy... :wink:
RAGO :lol:
Thanks a ton Rago, will try this out this evening and see how it goes with the card in the XDA. Thanks again.
Cheers, Vikas.
RAGOv said:
vikasmal said:
Formatting this in FAT, how should I do that? With my XDAII on the USB cradle or with a card reader?
Click to expand...
Click to collapse
Hi vikasmal...
put ur SD in a memory card reader,then on ur pc/my computer/SD reader label(X),right click and choose format,then in the window menu that appears choose FAT (FAT32 is default),u won't get lost,it's easy... :wink:
RAGO :lol:
Click to expand...
Click to collapse
Hi,
I've been using a 1gig Sandisk Card for about 6 months & have never had to do a hard reset (unless taking the battery out too swap sims).
I didn't have to format it or anything, just got it out of the packet & put it in.
not much use to your problem but it may rule out the card??
Thanks Floody,
Appreciate it. Have done a format in FAT and NOT FAT32 for the Sandisk card and for the last three days, no hard reset. Hope it works this time around. Knock Wood
Cheers, Vikas.
floody said:
Hi,
I've been using a 1gig Sandisk Card for about 6 months & have never had to do a hard reset (unless taking the battery out too swap sims).
I didn't have to format it or anything, just got it out of the packet & put it in.
not much use to your problem but it may rule out the card??
Click to expand...
Click to collapse
where to buy WIFI SD Card in Phils? thanks in advance
no idea what phils is but you can try
http://www.expansys.com/
thanks, found one already!!!
where in phil can u buy ansd wifi card
can i ask where in phils did you find an sd wifi card as i'm also looking for one?
christian1978 said:
can i ask where in phils did you find an sd wifi card as i'm also looking for one?
Click to expand...
Click to collapse
me too.... ...
check out www.ebay.ph and on the search menu, type xda2 SDIO. It costs about P3000-
arzakem said:
check out www.ebay.ph and on the search menu, type xda2 SDIO. It costs about P3000-
Click to expand...
Click to collapse
is this worth it. would using wifi card means giving away the sd cards for storing files?
hi
have a look @ my signature, i buy stuff to spectec company, work's great.
enjoy
Hello every one.I found an WiFi sd card for my xda and in the specs it sais it's copatible with Pda's wich have an SDIO enabled slot.I have an O2 XDA II an upgraded the rom to wm6.Can you tell me if it's ok to buy it?
Here are the specs.Thank you very much.
http://www.expansys.com/d.aspx?i=121110
yeah i bought one... it worked fine until the dog chewed it... you will have to try a few different drivers until you get the right one... from memory i ended up using the wm5 driver...
Thank you very much for the answer .It is the only one that's not so expensive.After i'll buy it i will put the conclusions here.Bye
I just got my Spectec SD wifi-g card (SDW-821), and it's works well on my himalaya. I use c_shekhar's wm6 (http://forum.xda-developers.com/showthread.php?t=332945).
That's got news.A friend of mine bought the card from Uk and will bring it to me in two weeks(I'm form Romania).Can't wait to have it
nathrinder said:
I just got my Spectec SD wifi-g card (SDW-821), and it's works well on my himalaya. I use c_shekhar's wm6 (http://forum.xda-developers.com/showthread.php?t=332945).
Click to expand...
Click to collapse
hello,
same for me, spectec works great.
enjoy the links below (signature)
+1.
Spectec 821 work's very good.
skikdi53 said:
+1.
Spectec 821 work's very good.
Click to expand...
Click to collapse
Would u pls explain the setting I cann't use it
well i've got a curious too
can this eye-fi_sdhc_connect_x2_4gb able to read by hima ??
http://www.bhinneka.com/products/sku00310517/eye-fi_sdhc_connect_x2_4gb.aspx
i want to bought it but it's kinda risk if it dont worked well at hima
Hi!
i'm a photographer and would be please to directly read my photos on the touchpad with and usb memory card reader ... any project seen on that ?
Fred
I would also like to know about this.
SENT FROM MY DINC2 RUNNING CM7 overclocked to 1.6ghz
I'm also a photographer so this would be very useful for me. It'd be great to be able to backup an SD to the Touchopad when on location.
The other option I'm considering is an Eye-Fi SD card or two so I can wirelessly transfer images. It should work.
lukeaddison said:
The other option I'm considering is an Eye-Fi SD card or two so I can wirelessly transfer images. It should work.
Click to expand...
Click to collapse
i don't think so :/ you nned a client on the touchpad to handle the data flow
i've an eye-fi, if you find a tuto, i can test
fbp2k said:
i don't think so :/ you nned a client on the touchpad to handle the data flow
i've an eye-fi, if you find a tuto, i can test
Click to expand...
Click to collapse
Thanks for the reply. I think I'll wait a while to see if it can be done before investing in an Eye-Fi card.
It actually might be possible there is a thread on it at precentral
forums.precentral.net/hp-touchpad/296505-functional-usb-host-touchpad.html
fishhelmet said:
It actually might be possible there is a thread on it at precentral
forums.precentral.net/hp-touchpad/296505-functional-usb-host-touchpad.html
Click to expand...
Click to collapse
It's definitely possible, people are doing it.
It just requires several cables (one an OTG), an AC-powered USB hub and your time. I'd rather be able to just plug in one cable/device.
We have the port, just need the OS to use it correctly. As I understand it, USB is USB - data-wise. Maybe one of the talented PreWare devs can write a patch we can load eventually.
Hello guys,
anyone know is it normal that i become with A1 bench reading around 50 mb and writing 40 mb?
Isn't it should 95 read and 90 writing?!
Fake sd card?
My galaxy s8 slows it down itself???
Ive just had a update that fixs sd card maybe the update will fix your problem when you receive it .
vimto25 said:
Ive just had a update that fixs sd card maybe the update will fix your problem when you receive it .
Click to expand...
Click to collapse
Interesting... have you same SD card as me? If yes, can you test it with A1 SD Bench and tell if it improves the speed?
GreyFox777 said:
Hello guys,
anyone know is it normal that i become with A1 bench reading around 50 mb and writing 40 mb?
Isn't it should 95 read and 90 writing?!
Fake sd card?
My galaxy s8 slows it down itself???
Click to expand...
Click to collapse
Same card here and same read and write speeds. Tested it in my computer and it is getting full speed like it should so its not the cards fault.
ProStreetCamaro said:
Same card here and same read and write speeds. Tested it in my computer and it is getting full speed like it should so its not the cards fault.
Click to expand...
Click to collapse
Thank you for your reply! Hope firmware update will improve the speed