hi,
i didnt have a problem with my 750v running wm6 until a few days it always turns on again when i turn the display off.
even when it turns off automatically it directly turns on again.
how comes?
promexx said:
hi,
i didnt have a problem with my 750v running wm6 until a few days it always turns on again when i turn the display off.
even when it turns off automatically it directly turns on again.
how comes?
Click to expand...
Click to collapse
This is a known bug. But it should only be there if you have your brightness set under 40%. Solution? Set it to 40% or higher...
Related
anything im missing guys?
after flashing with the new ATT wm6 all works fine except the screen backlight keps coming on, even after pressing the screen off button it comes back on after a few secs.
peeps. anyone experience this?
i had the same problem
u cent stop it by turning your screen brightnes to 50% or above (using palm bult in brightness program (press function button (the white spot) + "P" ))
vladimir2989 said:
i had the same problem
u cent stop it by turning your screen brightnes to 50% or above (using palm bult in brightness program (press function button (the white spot) + "P" ))
Click to expand...
Click to collapse
woohoo! problem solved, thanks man!
My Voda WM6 works fine with backlight set to 40%
Sigh...I should have come here to see the solution first before I hard reset my phone.
I got the same problem, but I perform a hard reset to resolve it.
Guys I posted this on another thread here but I thought I'd mention it here as well just in case you guys can help me out.
I have my Treo 750v to connect to the net and check for emails every 30 minutes but whenever it does, the screen comes on!
Is there anyway I can get around this?
I would appreciate any help.
Thanks.
D.C
Dead Cell said:
Guys I posted this on another thread here but I thought I'd mention it here as well just in case you guys can help me out.
I have my Treo 750v to connect to the net and check for emails every 30 minutes but whenever it does, the screen comes on!
Is there anyway I can get around this?
I would appreciate any help.
Thanks.
D.C
Click to expand...
Click to collapse
Stupid as it sounds, this does appear to be a bug in the Treo WM6 update. It's still there in 2.23 VF as well. If you have Keyguard set to kick in at screen off and you set the brightness to anything other than 20% or 60% (at least for me) then the screen keeps turning on and often won't turn off after the 1 minute timeout. Got mine at 60% and its fine.
not sure why but as soon as the timer for the screen kicks in it turns right back on.....anyone have suggestions?
Unlocked ATT 750 with ATT leaked WM6.
It is something to do with the brightness setting. Put it 40% or more.
Hello
I've got a Treo 750v with the latest WM6 installed and I'm getting the same problem too. I've got it set so that after 2 minutes, it turns off, but instead of doing so, the password screen comes on and stays lit till I put it to standby manually!
The other problem is, I've got mine to auto connect and check for messages via GPRS, and whenever it does this, the screen turns on and never turns off again.
I've had to turn this feature off else when I wake up, in the morning or even during the day when I'm at work, I find that this kills the battery!
Any ideas?
Thanks
D.C
I ocasionally have the same problem, I do a soft-reset when it happens.
I couldn't reproduce the problem, but when it happens again I'll investigate the brightness setting...
It really is the brightness-setting...
Isn't that redicioulus?
Hi All,
I have a (strange?) problem with the screen backlight - dont know if this is a feature or a bug? I have the "Auto adjust backlight" checked on (by default). While I connect to my pc (via usb) during autosynch, the screen dims after a certain time - which is good, but the screen backlight does not brighten up when I start using the phone (the phone still being connected to pc via usb). The screen brightens up if I click the power button off and then on but this disconnects the autosynch and reconnect.
Am I missing something?
P.S, I have installed "Autoconfig" and "Diamond Tweak" both, but have not configured anything from there.
Thanks,
pkshr
Any suggestions ....
be patient... people will eventually help you
In the mean time why don't you just turn off auto backlight ?
Hi abc12345,
I am noticing this issue not only during syncing but even when using the phone too. If I use the phone for few minutes the backlight automatically dims even I am still using the phone.
Sorry if this seems a stupid question but why does the power button turn off and on brightens the screen if it has to dim after a while? Is this an expected behaviour? Is unchecking "Auto backlight" the only issue for this?
Is this problem only with my fuze ??
pkshr said:
Is this problem only with my fuze ??
Click to expand...
Click to collapse
I have the problem too
Just waiting for a solution..it used to fine with my phone until i installed ThrottleLock0.4.. then the same things happened..i would auto sync my phone and when i would push the power button ..it disconnects the autosync..
same issue here
I have an MDA Compact V (Uk Tmobile). Whenever I turn the screen on ,it shows the last screen I was looking at then I turned the screen off. This I believe is the default and expected behaviour.
However, when I am using TOMTOM and I turn the screen off, the phone always reverts to to the home screen and not back to the TOMTOM screen. This is a pain when I am driving and turn the thing off and on, on long journeys.
Is there are simple fix for this?
Thanks in advance
anyone got any ideas?
Hi
I am using HTC touch 2 (MEGA) with TomTom navigator.
Before I bought yhis device, i was using Tomtom without the screen, and only listening voice.
But on this device, when I press red button (to turn off display), the Tomtom is still running, but GPS is deactivated.
How to turn off display without disconecting GPS? Or leave GPS working, while tomtom is running and the display is turned off?
Thanks
kuby said:
Hi
I am using HTC touch 2 (MEGA) with TomTom navigator.
Before I bought yhis device, i was using Tomtom without the screen, and only listening voice.
But on this device, when I press red button (to turn off display), the Tomtom is still running, but GPS is deactivated.
How to turn off display without disconecting GPS? Or leave GPS working, while tomtom is running and the display is turned off?
Thanks
Click to expand...
Click to collapse
I never found a solution for this
In tomtom, change the backlight settings to use the devices settings... then the backlight will drop out. I don't think you'll find a way of running with the screen off, because when you turn the device off, it goes to standby.
You could use mortscript, and have a script with 'Toggledisplay' in it, then assign it to the lng press of the send key - that would turn the screen off and on without putting the device into standby.
TangerineTractor said:
In tomtom, change the backlight settings to use the devices settings... then the backlight will drop out. I don't think you'll find a way of running with the screen off, because when you turn the device off, it goes to standby.
You could use mortscript, and have a script with 'Toggledisplay' in it, then assign it to the lng press of the send key - that would turn the screen off and on without putting the device into standby.
Click to expand...
Click to collapse
I´ve a screenoff aplication (wich not goes pda to standby) and the GPS goes off too.