M8s, can any1 help me?!?!?! While i am doing something on my phone, on display shows some strange lines, and display start to become white... It sometimes gone crazy with this, and sometimes, it works ok!!! I have WM5... anyone know what could be a problem...? And how to fix it?
Thx in advice!
dont worry ur phone is not dead maybe the wires that connects the lcd with the motherboard are not so good
So, what you think what i can do...? It usually gone wild while i am doing something big... For example: deletting big amounts of files in same time... I am not touching it while it deleting them and lines again apears... And phone is relatively new... 3 months old!
i've the same problem. i asked a lot of questions about this problem in other forums but no one helped me. Because they didn't know anything.
i changed a lot of WM6 roms but the problem is still going on. i opened my wizard and i connect the parts in my hand. It worked and the scrren didn't freeze. Then i put the parts in the case, the freezing came back. i remove the main part in the case and connect it outside the case, it didn't freeze. So i think the problem is in the wire thet connects the lcd to motherboard. I think i'm gonna change my lcd.
If anyone knows something or "Orbiter87" if you find a solution for this problem, please write here. Thanks...
(sorry about my english, it's not good enough)
Hey guys,
Your problems have nothing to do with ROMs, these sound like hardware issues with the wizard itself. Orbiter, if your wiz is less than 3 months, I'd hound the warranty. If you don't have warranty, you may have to do some home repair. I'd love to help you, but can't...I'd probably throw out my wiz before I attempt to do anything with its hardware.
And one more thing... When i am playing some games or turn on some programs, it works normal... So i think that it is something with ROM!
it's nothing about ROM
i have the same problem on my 9100 try to move the display a litle bit when the stripes appear
i said the problem was in the lcd wire but now i don't think.because i opened the case and took the mothermoard out of the case i turned it on. it work and touched-pressed everywhere on the board, lcd wire but it didn't freeze. Again i put motherboard in to the case, it' freezing started. i think i'm gonna buy a new one and throw away this one. otherwise i'm gonna be crazy...
had the same problem a long time ago.
in my case it was the batterytodayplugin/program called "batti" in combination with overclocking.
so what programs are installed on your wizard
steph
I erased lots of stuff! Now i have only:
Anton Tomov Pocket Mechanic
Loving Wife Unlock Ext Rom Wizard
C. Ghisler & Co. Total Commander
The screen going white usually happens when the Flexi Strip connecting the Lcd to the motherboard is either not properly fitted or is damaged,white screen is very rarely the fault of the LCD.If the wizard is in warrenty then send it back otherwise if you are willing to do it yourself then download the k-jam service manual and give it a go.
I think you mean "the wire that comes from lcd to the motherboard" as flexi strip. If so, i did a lot of thing with that wire but it didn't change. Like i said, when i took off the motherboard from the case, i pressed every point on the board but it didn't go to the white. But when i put it into the case and press or do something to the board it goes white. There is a problem with case but how can the case do something to the lcd' image...
(While doing this things, the wizard was open)
Related
I purchased a Tornado a little while ago and didn't vet it properly first. It was descibed as having a cracked screen which was actually a cracked LCD. I have replaced but I get only a white screen on boot. The unit works fine other than this as I can connect via BT and USB. I have been able to verify that the file system is fine. I am assuming water damage and am going to try the DISTILLED WATER / COOK solution, but before I do...
Now, being aware of my status here, I can only make an offer to anyone with expertise on this. If anyone thinks this a problem they can resolve I am either happy to sell them the phone, take their advise and split the profit when I resell it or send it for paid repair.
Any takers?
Thanks for taking a peek at this thread.
P.S. Please, no remiders of my remiss behaviour when purchasing it. I have already kicked myself half to death, thanks.
A white screen normally means the ribbon cable to the lcd is not inserted properly, make sure the white lines on the cable and the main board are lined up. I've had the same problem.
have had the same problem with htc tytn, p4350.
after reboot its okey again
My screen worked fine earlier today, then out of the blue went dark. It is as if the backlight is set at a permanent low setting. I can barely make out what is on the screen. It is not totally black, but it is by no means easily visible. I have not made any reg changes or application installs that I did not previously have.
Please help. This particular device was an insurance swap out made in November. I have tried hard resetting, and nothing. It is still a very dark screen--even the initial TMo boot screen is dark.
I am running Jaguar 3.1 by NTS.
PLEASE...help. I would very much appreciate any insight. Is my screen fried? Is it able to be fixed?
Thanks in advance.
akashastrega said:
My screen worked fine earlier today, then out of the blue went dark. It is as if the backlight is set at a permanent low setting. I can barely make out what is on the screen. It is not totally black, but it is by no means easily visible. I have not made any reg changes or application installs that I did not previously have.
Please help. This particular device was an insurance swap out made in November. I have tried hard resetting, and nothing. It is still a very dark screen--even the initial TMo boot screen is dark.
I am running Jaguar 3.1 by NTS.
PLEASE...help. I would very much appreciate any insight. Is my screen fried? Is it able to be fixed?
Thanks in advance.
Click to expand...
Click to collapse
you can try the prog Mymobiler to see if your today screen is really dark (if it´s dark on your computer too, than i think it´s a software failure) if it´s shown normal on your computer than i don´t know, maybe hardware failure...
sorry can´t help more
steph
I have that program too, and didn't even think about that. I will try it and report back. Thanks for the idea.
EDIT
Everything works fine using My Mobiler. I was able to make sure power and brightness adjustments were made-but to no avail. I even flashed a different rom just to rule out rom failure. My screen is still dark. In bright light I can barely view the item, and that is with some serious squinting.
Could it be my screen needs replacing, or is this a bigger issue like the mobo? If you suspect the screen only, could you please suggest where I can get a replacement screen?
This sucks big time. I love my Wizard and really do not want to move to an inferior device (like a "regular" cellphone, or the Wing--which is what insurance would swap me with).
PLEASE HELP ME FIX MY WIZ!!
I remember a long time ago...
akashastrega said:
I have that program too, and didn't even think about that. I will try it and report back. Thanks for the idea.
EDIT
Everything works fine using My Mobiler. I was able to make sure power and brightness adjustments were made-but to no avail. I even flashed a different rom just to rule out rom failure. My screen is still dark. In bright light I can barely view the item, and that is with some serious squinting.
Could it be my screen needs replacing, or is this a bigger issue like the mobo? If you suspect the screen only, could you please suggest where I can get a replacement screen?
This sucks big time. I love my Wizard and really do not want to move to an inferior device (like a "regular" cellphone, or the Wing--which is what insurance would swap me with).
PLEASE HELP ME FIX MY WIZ!!
Click to expand...
Click to collapse
The first time I have use a Pocket pc in settings I uncheck the square that say "Turn on backlight whena button i pressed or the screen is tapped".. or something, jeje every time I turned on my wizard, it hasn't light jaja.
But I think that your problem is hardware, you need another wizard to change displays... cause if you buy a new display... maybe the failure isfor the motherboard...
Think about it...
+ Que PPC said:
The first time I have use a Pocket pc in settings I uncheck the square that say "Turn on backlight whena button i pressed or the screen is tapped".. or something, jeje every time I turned on my wizard, it hasn't light jaja.
But I think that your problem is hardware, you need another wizard to change displays... cause if you buy a new display... maybe the failure isfor the motherboard...
Think about it...
Click to expand...
Click to collapse
Thanks for your quick responses!!
I was worried that the issue could go beyond just screen issues. Does anyone know a way to troubleshoot something like this? To find out if it is just a screen, or if the MoBo is going out on me...
**Or is anyone willing to sell me their working but no longer used wizard? I can afford about $100 (+shipping costs/insurance) for a used but working device. My hubby is unemployed and I am on disability so right now money is tight.
akashastrega said:
Thanks for your quick responses!!
I was worried that the issue could go beyond just screen issues. Does anyone know a way to troubleshoot something like this? To find out if it is just a screen, or if the MoBo is going out on me...
**Or is anyone willing to sell me their working but no longer used wizard? I can afford about $100 (+shipping costs/insurance) for a used but working device. My hubby is unemployed and I am on disability so right now money is tight.
Click to expand...
Click to collapse
Check ebay, you maybe able to find a working phone for 100 bucks. Gook luck!
have you checked the wiring (flat cable) that connects to the screen.
maybe you just need to replace that. if the screen works, then it is just the LED's that are not responding. maybe just a loose connection, or a broken contact.
Does the keyboard light up?
i think i have the same problem or at least similar.
my screen backlight goes black from time to time when i press the screen "too hard", but that comes and goes.
interesting: i'm using homescreen plusplus (ex-batterystatus) to overclock my cpu with the option "set cpu speed at wakeup" activated. when i turn off my screen with the power button and then turn it on again, in most cases my backlight turns on, too.
but that's to enerving for me to live with that, so i disassembled my wizard and found some sort of black dot on the flat display connector. maybe it has something do with that? and if so, where can i get such a flex cable?
S.V.I said:
have you checked the wiring (flat cable) that connects to the screen.
maybe you just need to replace that. if the screen works, then it is just the LED's that are not responding. maybe just a loose connection, or a broken contact.
Does the keyboard light up?
Click to expand...
Click to collapse
I have the manual--I used it when my usb was fubar'd--but I am a bit intimidated about doing something with my screen. Is it something that can be easily screwed up if I even look at it funny, or can I handle it carefully and not worry that the mere act of touching it will make it explode??!!
Perhaps I am being a bit dramatic, but you get the idea I think.
Do I have to be totally grounded out first? Do I need gloves on? Or do I just rip the dang thing apart and go at it?
Thanks for your help and responses.
akashastrega said:
I have the manual--I used it when my usb was fubar'd--but I am a bit intimidated about doing something with my screen. Is it something that can be easily screwed up if I even look at it funny, or can I handle it carefully and not worry that the mere act of touching it will make it explode??!!
Perhaps I am being a bit dramatic, but you get the idea I think.
Do I have to be totally grounded out first? Do I need gloves on? Or do I just rip the dang thing apart and go at it?
Thanks for your help and responses.
Click to expand...
Click to collapse
You can get an anti-static kit in Radioshack!
Well I don't have a Wizard, so this might not be much help; however, I have had a similar problem with my Touch Elf after installing a new app. The dark screen did not appear until I performed a soft reset and I really started to panic because there was nothing I could do to change it. I could barely make anything out that was being displayed it was so dark. Even when I turn my screen brightness down it was not ever that dark. Just out of luck though I pluged my phone into my computer VIA USB and voila, the backlight came on. I could use my phone again and immediately navigated to my brightness display settings and turned it all the way up (it was set all the way down for some reason). I have not had this problem ever since. I don't know if you have tried this already or not - It was not mentioned in any posts.
Good luck
Rod
Check out eBay for a replacement LCD, I got one last week for € 32,- ($45,-) including the shipping costs.
BUT...when buying from eBay notice the following 2 things:
1) The screens are most of the times used screens with a new (hand-soldered) digitizer on it (but it is done nicely as far as I have seen).
2) Disassemble your Wizard, check if your LCD has a BLACK or a GOLDEN flex ribbon cable at the back.....when you purchase the wrong one, it will not work!
An alternative is just to buy a 2nd hand Wizard for like $70 / $80, buy a new housing for it ($40) and it looks brand new (except for the LCD, most LCD's do have some scratches on it).
A HTC Wizard Service Manual can be found in the Wizard section on the XDA Dev FTP Server (I use it a lot), sometimes when buying a LCD on eBay they will also send you the tools needed to disassemble and reassemble the Wizard.
Good luck!
jozzy said:
i think i have the same problem or at least similar.
my screen backlight goes black from time to time when i press the screen "too hard", but that comes and goes.
interesting: i'm using homescreen plusplus (ex-batterystatus) to overclock my cpu with the option "set cpu speed at wakeup" activated. when i turn off my screen with the power button and then turn it on again, in most cases my backlight turns on, too.
but that's to enerving for me to live with that, so i disassembled my wizard and found some sort of black dot on the flat display connector. maybe it has something do with that? and if so, where can i get such a flex cable?
Click to expand...
Click to collapse
I can furnish you with a flex cable for $15.00, plus $5.00 for shipping. Let me know if you have an MDA or 8125.
Hi all,
I am at my wits end on this problem if anyone can offer any adivice it would be greatly appreciated. So let me give a recap of what has occured thus far. The water damage tag for some reason turn pink thus i am unable to get warranty exchange. I am pretty certain that the phone has never been expose to any water of anything of that sort, but i do live in houston, tx so might be humidity or what not that cause the tag to turn. Anyways.
1. This all started after i flashed RRE 5.2 RC3. Initially after a successful flash everything seem normal and fine. Then next morning i woke up to a frozen screen with many verticial lines running up and down the screen was almost unreadable. Initially i thought it was a bad flash or just random lock up. I did a hard reset and tried to enter the bootloader. Black screen, it does seem like the backlight is coming up but nothing on the screen. I can hear the phone power on and boot successfully into windows. Activesync connects i can browse the contents of the phone.
2. After flashing to stock att rom and stock htc roms same symptoms. So at this point i am thinking crap bad LCD screen. so I ordered both the digitizer and lcd screen for good measure. I replaced them hoping that a bad LCD was all. replaced both screens and i powered on the phone. same problem. black screen. The phone still powers on and boots into windows. Activesync still connects and i cna still reflash the phone.
3. I work extensively and do both desktop pc and notebook repair. I am not new to dealing with small electronic repairs. but at this juncture i am unable to identify the cause of hte malfunction. i am hoping maybe some of the gurus here might be able to shine some light on the subject.
Thanks in advance for any help.
I would have followed the same approach; your description makes it sound like it might be some kind of backlighting issue at first read. I'm inclined to think it might be a cold connection (bad connector) on the main board.
Silly question, what happens if you power up the phone with the keyboard exposed?
*EDIT* Not sure if you have been here yet: http://www.mikechannon.net/
Cheers,
i just tried to power up the phone with keyboard exposed. Powers up the same as with the keyboard hidden. Still boots up fine but black screen. I already have the service manuel dowloaded. i have checked around with several repair places both local and on the web. Seems like no one has any parts for the att fuze/touch pro gsm except for the lcd and digitizer and a speaker.
its quite possible that it is a main board but as the same time it might be something as simple as a ribbon cable. i have contacted htc about doing a possible repair and they want wayyyy too much for just a main board repair almost $400 USD.
Anyone have a bricked/ non working touch pro they would like to sell ? =P
fkoong said:
its quite possible that it is a main board but as the same time it might be something as simple as a ribbon cable.
Click to expand...
Click to collapse
Could be a bad ribbon cable ... and firmly pressing around the front/back of the unit shows no change?
pressing the phone front and back show no changes to display. in a very dark room I can see that there is light emitting from the display but its just the screen is not displaying anything visable. this occured both before and after i changed out the screens. I'll do another visual inspection of all the boards to see if there is any bad resistors burnt out circuits etc.. but i didn't notice anything mentionable during my first 2 inspections. Maybe 3rd time is the charm.
Thanks for all the feedback thus far Hilaireg it is quite appreciated. All this venting has at least made me feel 1000% better than after i replaced my lcd and still same problem at least i don't feel like a complete idiot!
Sorry I couldn't be of much help ... you've done all the steps a seasoned hardware person would do.
Do post back to let other folks know if you get it back up and running.
Cheers,
you have a pm fkoong.
I have possibly the same problem. Phone got wet, dried it out for 2 days (in a container of rice). Phone worked but had "water marks" on screen that disappeared after two days and everything was fine for about 2 weeks. Then one day (happened to be humid misting rain eve in Charleston) the screen is blank (hint of backlight only). A soft reset and it seems OK for about 1hr, then blank again. The hard resest screen displayed OK (readbale text etc), but didnt work. But as I write this, I retry to document it results correctly and the NATF ROM is reloading and the screen works! We will see how long!!
Well.. not that long, the end of the ROM load and it went blank again, seems like a video driver problem. The Press VoluP to boot does show some red artifact.
Trying hard reset again (No SIM no uSD)
The NATF v4.4 loads and gives me the Tap screen, Align Screen, stylus, loads customization, opera, tf3d, then loads a bunch of files under ...... and then the screen goes blank again, seem like what happened last time, so Ill try loading a fresh ROM copy... later
Firstly, my screen does not show visuals. I can still touch the screen and make things happen, but it is just a back-lighted black screen. I have answered calls on it and such. Basically I'm returning it and getting a new one.
Since I am getting a new one, I want to see if anyone ever heard of this problem and to see what the cause of it is, for prevention purposes.
I didn't get it wet (the white sticker in the back is still white.) Though I have flashed PROven ROM to it a couple months ago (it's a great ROM by the way), but could that have messed up my screen?
I also wanted to know since I can't see the screen, would I have to, for warranty purposes, (blindly) reflash to the Stock ROM?
Thanks in advance!
Yeah, you probably oughta return it to stock configuration (good luck on that!). If you're really lucky, that might even fix the problem. Have you done a hard reset yet? Might be worth a try, although it certainly sounds like a hardware problem.
Sounds like the flex cable has gone bad
Exactly same thing happened to me this Tuesday. Luckly I backed up info to memory card using PimBackupV2.8 with remote control software on my PC. With the remote contol tool, I could see everything as if on my phone and icons are clickable.
Hard reset did not fix the issue. I then flashed the shipped official ROM and stock SPL for warranty purpose. Will send the phone to them today for repair.
mine also like that..
from vodafone also..
the things that make me panics is the phone become hotter and hotter.
asdiqa said:
mine also like that..
from vodafone also..
the things that make me panics is the phone become hotter and hotter.
Click to expand...
Click to collapse
Summer is coming...
Sometimes they make updating phones too easy......
The back of my phone often gets hot I have to use the edges to hold it even though it was not a hot day and it is in my pocket.
blank screen
ya so my screen is blank white
but everything else works
i've heard something about this being a faulty "flex cable"
how can i fix this?
thanks so much for your help
how do i fix this???
did you eventually find out how to fix this/???
u ever end up fixing that? how?
thankss
Mine was still in warranty so I rang Vodafone. They sent me a special delivery envelop the following day. I sent it back to them. The following day I got a text message from them saying they got it and was working on it to fix the fault. The next day received another message saying the device was on the way back to me and I should receive it the following day.
Actually they sent me back a replacement
So.. basically.. is this a faulty flex thing?
I had the same problem for the last week until today i was about to buy another one since i dont have any warranty for this one.. I searched google and saw somebody say that just putting a business card between the keyboard and the lcd and then slide it and it works so far
hope it helps everybody
Ack! my Fuze, which I got off eBay a few months back, just went black too.
I'm not exactly sure whether it's the LCD or the flex cable, but the fact that the D-pad backlight also has become intermittent makes me think it's the cable.
So has anyone attempted the flex cable repair themselves? I see you can buy the cable for around $40 and the LCD for around $80 from Hong Kong.
Maybe this is a sign I should just get an Android device.
eelpout said:
Ack! my Fuze, which I got off eBay a few months back, just went black too.
I'm not exactly sure whether it's the LCD or the flex cable, but the fact that the D-pad backlight also has become intermittent makes me think it's the cable.
So has anyone attempted the flex cable repair themselves? I see you can buy the cable for around $40 and the LCD for around $80 from Hong Kong.
Maybe this is a sign I should just get an Android device.
Click to expand...
Click to collapse
Did you end up fixing it? I have the same problem.
same thing happened to me Twice.... in my sleep overnight. I LOOOOOOOOVe my raphael but man this was the last straw
This maybe of some help for those of you with blank screens. I bought a Touch Pro on ebay that had a very dark screen, occasionally you could just make out some icons being displayed. Using Mymobiler showed that the basic system was working, as was the touchscreen. Other symptoms were that the camera would not work and the keypad lighting was intermittent. Sometimes on connection to Mymobiler a dialog box would come up saying there was an error with Microp?!?
Despite cleaning all internal connections and ensuring they were correctly and securely made the problem remained. I then noticed that the small camera used for video calls (in a socket on the main flex cable) looked very dirty and corroded. I removed the camera module and, using a fibreglass brush, cleaned the contacts on both the socket and the camera module. These were very badly corroded with verdigris.
On putting everything back together I was most surprised to find the screen was now working, as was the main camera. Unfortunately the ROM that is loaded doesn't seem to have any facility for checking the front video camera. There are still problems with sound - both the loudspeaker and the headphones seem to be dead and I have not had the opportunity to test GPS, Wifi, bluetooth, buttons, etc, however I will keep working on it.
Hope this is of help to someone.
I need to align the screen again & again can any one help me out wer the problem lies
how did this happen? i also encounter a similar problem, when the phone gets warm... when i press on the right side, the click registers mode and more to the left... and when that happend, if i try to go to the alignment screen, it just hangs in there like.. forever... if i put the phone in standby mode, everything gets back to normal in a few minutes.. the problem repeats every time the phone gets warm...
Same
First i was also having the similar problem but now its totally unaligned i.e even after a time its same i click on extreme left it click on extreme right
nasty man... dunno why this is happening... so, my screen is dying.. damn :| what kind of mods did u do to your phone? software ones
I have the same problem! Seems this is an manufacturing issue that's affecting many Diamonds! Does the warranty cover this?
Same problem
Hi Guys,
i'm also facing the same problem,
i have hard resetted my mobile then for a week it worked fine and then again the same problem... damn i lost my all data while hard resetting.... does any one have solution.
did u guys found n e solution
crazymushroom88 said:
did u guys found n e solution
Click to expand...
Click to collapse
YEAH! ) i sent mine to warranty today, lol 15 long days at max until it will be back in my loving arms
i dont know if this might help
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
i can see some leaked fluid above my screen ........... i cannot even explain it , because it's above the screen but i cannot touch it ........ so it's in between.....
i've had the same thing happen to me and sent it in for warranty.
came back ok for awhile, now its happening again. I usually just suspend my phone (power button) and give the LCD a rub that helps it a little, buts its quite unbearable at times.
I've sent it in to warranty for a second time today, warranty is expiring on the 8th of next month so they better fix it by then .
bevoc said:
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
Click to expand...
Click to collapse
HardSPL didnt fix my problems have flickering (blurry/vibrating screen) but it disapears after setting the phone in standby and waking it up again.
bevoc said:
i used to have flickering screen, not being able to display alpha blend, transparencies or the colour black, and also not being able to keep the screen alignment (it resets everytime i soft reset the phone) ....
this happens when i used the latest update from htc.
it seems that the upgrade is not suitable for devices bought in 2008 as it has the ols original spl.
i read in the forum and found out that the radio, and the hard spl was part of the problem. so i read on and found that by using Olipro's hard spl 1.93 will fix most of the problem. but its for only gsm devices.
i flashed 1.93 hard spl and all my problems went away...
just sharing!!
Click to expand...
Click to collapse
HardSPL didnt fix my problems have flickering (blurry/vibrating screen) but it disapears after setting the phone in standby and waking it up again. (Only gets blurry flickery at boot)
My diamond only get flickery at the boot and by going to standby and back it disapears.
Guess im lucky
I have the same screen align problem. When the phone gets hot, the screen alignment screw up, similar to this one:
http://www.youtube.com/watch?v=5-IUzerAT0s&feature=related
I was told this is a hw problem as I've tried flashing different ROMs, update radios etc. but still doesn't help.
Right now I'm trying to avoid using the phone when charging or when it becomes warm. That seems to help a bit. Not sure if replacing the screen will help but a few folks here have suggested that.
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
JexL said:
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
Click to expand...
Click to collapse
Please do update if replacing the LCD does in fact get rid of the problem
JexL said:
ye iv had enough of this problem shall embark on replacing the lcd in a few weeks
Click to expand...
Click to collapse
dont think that actually helps - you'll prob need to replace the digitizer .
hello2004 said:
I have the same screen align problem. When the phone gets hot, the screen alignment screw up, similar to this one:
http://www.youtube.com/watch?v=5-IUzerAT0s&feature=related
I was told this is a hw problem as I've tried flashing different ROMs, update radios etc. but still doesn't help.
Right now I'm trying to avoid using the phone when charging or when it becomes warm. That seems to help a bit. Not sure if replacing the screen will help but a few folks here have suggested that.
Click to expand...
Click to collapse
Long story short: it is a hardware problem! nothing you can do to fix it via software... and it gets worse, so get it fixed
I have just received mine from service a few days ago... Of course i lost my warranty and I paid almost 200$ to get it fixed... The front case gets replaced entirely (that includes both digitizer and LCD), because it comes in one piece... all components are stuck together that is, even if you have a perfectly working LCD, it will be replaced anyway... Fortunately this helped and I am not experiencing any problems... Also I've been told that this problem may occur again, after some time (1-2 years), if the phone is heavily used (gps, connected on 3G + screen awake for a long period of time), and that the simptoms may vary: some get the digitizer / misalignment problem, others get weird spots on their lcd, etc...
Hope i didn't make to many mistakes and that my reply will help you understand and get your problem solved...
reflexivemedia said:
Long story short: it is a hardware problem! nothing you can do to fix it via software... and it gets worse, so get it fixed
I have just received mine from service a few days ago... Of course i lost my warranty and I paid almost 200$ to get it fixed... The front case gets replaced entirely (that includes both digitizer and LCD), because it comes in one piece... all components are stuck together that is, even if you have a perfectly working LCD, it will be replaced anyway... Fortunately this helped and I am not experiencing any problems... Also I've been told that this problem may occur again, after some time (1-2 years), if the phone is heavily used (gps, connected on 3G + screen awake for a long period of time), and that the simptoms may vary: some get the digitizer / misalignment problem, others get weird spots on their lcd, etc...
Hope i didn't make to many mistakes and that my reply will help you understand and get your problem solved...
Click to expand...
Click to collapse
I'm not too sure about that actually - how you stated the LCD / Digitizer and case comes all in one.
I've actually experienced the same issue, sent it back the first time. Fonebiz did not replace anything but a flex cable. Ironically, issue came back after a months time.
Sent it in a second time for warranty, i specifically included a note stating the issue - they replaced the LCD, but did not replace the digitizer; so guess what ? issue came back within the month.
Phone was finally out of warranty, i decided to send HTC a ***** email and they were very helpful and they've promised me a replacement. Waiting for Fonebiz to check for hardware faults if its all clear then i get a new phone
realazyjai said:
I'm not too sure about that actually - how you stated the LCD / Digitizer and case comes all in one.
I've actually experienced the same issue, sent it back the first time. Fonebiz did not replace anything but a flex cable. Ironically, issue came back after a months time.
Sent it in a second time for warranty, i specifically included a note stating the issue - they replaced the LCD, but did not replace the digitizer; so guess what ? issue came back within the month.
Phone was finally out of warranty, i decided to send HTC a ***** email and they were very helpful and they've promised me a replacement. Waiting for Fonebiz to check for hardware faults if its all clear then i get a new phone
Click to expand...
Click to collapse
i assure you cannot replace just the lcd, not without a hammer! I got my old part back, I can take some pictures of it, just in case And the digitizer is one and the same with the front case... the diamond is a very small phone, that's why there are no screws or other stuff to hold together the lcd and the rest of the case.
So unfortunately for you, they may have told you they replaced the lcd, but i think they did nothing :|
It is very clear that we had the same problem... the digitizer itself got broken... not some cable or lcd
anyway, if your phone has warranty, you are a happy man