im looking at these steps:
# Step 3. Enter the bootloader. To do so, press the Push-to-talk / Media button on the left side of the device, then push the reset pin with your stylus.
# Step 5. When the upgrade is done, Hard reset your treo (Press Power + soft reset, then Up).
for step 3, where is the reset pin? i don't see it anywhere on the treo 750?
for step 5, how do i do a hard reset? whats it mean by press power + soft reset, then up?
thanks
3) Open the Mini SD door on the right side of the unit. On left side under SD, is a reset button.
5) Push Red Power button and push the reset button detailed in 3) at the same time, then look at the screen it tells you what to do.
Related
Hello all! Sorry to be a goof, but I cannot figure out how to
hard reset/cold boot my Qtek 8310 with the soft keys (comm mgr & camera) + power on. I only manage to get to the boot loader and it gives me no options.
I know I have done it before and on other devices there was usually a menu choice that enabled you to hard reset / go to bootloader.
I would be very grateful for advice on this topic!
Thanks for a great forum!
Turn off the phone and hold left and right soft buttons (start and contacts) then swith on pushing a power button about 1sec. When you see blask screen press 0.
Understand?)
another way: Turn off the phone and hold camera button, after that insert USB cable. Wait 3 sec the bootloader will show.
you have 4 buttons on ther bottom of the screen
press the right on and left one and power in the same time
ask to factory default tape 0
then the fone hard reset
Thanks to GSM-CLINIQUE.COM
Hi,
I turned off my phone yesterday and then when I tried to turn it on again it got stuck at the white screen that appears at first - it shows the HTC logo and the information about the software in red letters. I waited for a few minutes but nothing happened, then I reset it from the button under the back cover and still the same thing happened - it stuck at the same point. Any ideas how to fix it? Thanks so much in advance!
Sounds strange, i would try to do a hard reset, but you´ll lose all your data on the device if you do this!
Any other ideas?
----
To hard reset your phone which means to delete ALL personal data and settings and have the phone in factory default conditions as if you turned on the phone for the first time after purchasing, press the following buttons:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
"This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel."
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.
If you have HSPL applied, you could be able to use MTTY method and upload new ROM.
Mtty tool recovery is nothing to mess with, it is a last resort. If you don't know what you are doing, you can easily kill your phone.
Do a hard reset, if that doesn't work, ( I anm assuming that since this is your first post, you do not have a custom rom ) find a copy of your rom and re flash it. But try severral hart resets first.
Thanks to all of you guys. The hard reset did the trick. I had my data backed up on the SD card so I will restore it from there. Thanks for the help.
hello sir,
how to reset iPAQ Voice Messenger(500 sereies) ?
hard reset or soft reset?
Soft reset: 1. turn off your phone.
2. remove battery for a few seconds then put it back in again.
3. turn it on again.
Hard reset: 1. turn off your phone.
2. PRESS AND HOLD the center of the directional keypad (OK button).
3. press the power button. do not release the OK button.
4. Unit will ask you if you want to reset. press yes.
Hard reset: 1. turn off your phone.
2. Press 6 and power button
3. Master Reset (1)Yes (2)No
4. Press 1
just go to settings and then security thene you should find something about hard reseting or soft reset
thankssssssssssssssssssssssssssssssssssssssssss
Hallo community,
I am new at the Forum and i need your help/advice.
I used for a quit long time a cooked ROM (pcarvalho eXtreme ROM), but for an unknown reason after a restart of the device the device is not starting again and hangs at Starting Windows screen (Tap the sceen to set up your Windows phone), without be able to tap the screen.
I tried to perform a hard reset, but it is not reacting at all and i cannot perform a hard reset.
Can somebody help me??
Thanks a lot in advance for your support!!!
BR
Ifaistos35
XDA orbit 2
To Hard reset and delete everything from your phone and then let the rom reload everything back to factory settings, do the following.
1. Remove SD card
2. Hold down the 'Windows Icon' Button and the 'OK' button at the same time and keep them held in.
3. While still holding in the above 2 buttons, use the stylus and press the reset button in and then release it but you must still keep the 'Windows' button and the 'OK' button still in until you are prompted with a menu.
4. Once the menu appears: press 'Send' button to reset and reload rom or any other button to cancel.
I had the same problem.
I can not launch the Touch Flo 3D it say to Tap the window but it does not launch. Does some type of reset need to be performed? If so what is the correct procedure?
Thanks
henry_gonzlz said:
I can not launch the Touch Flo 3D it say to Tap the window but it does not launch. Does some type of reset need to be performed? If so what is the correct procedure?
Thanks
Click to expand...
Click to collapse
Did you do anything before it got to this stage such as install a new app or theme ?
If you did then try one of the threads listed here http://www.google.co.uk/#hl=en&safe...S3Dg&sqi=2&ved=0CCEQrQIwAA&fp=fb65bc885a9abf7
If you didn't do anything and it just won't start then try a soft reboot (take off the battery cover and there is a red reset button under the stylus)
As a last resort and i mean last as this will lose anything that you haven't backed up including contacts stored to phone , programs installed to phone and messages etc you can do a hard reset.
Before doing a hard reset i strongly recommend you have a look around the forum and see if you can find a backup utility that will back everything up to your pc and will save you time and having to lose everything.(can't recommend one to use as i really don't have all that much to backup on mine so have never bothered)
To do a hard reset
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see a message on the screen telling you all data will be lost.
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
A hard reset will restore all factory settings but please note this will remove anything that you have added to the ROM that is on there from programs to contacts and messages.