Database Info

fixed the wifi driver is not loaded...

i make this thread because i never found a solution anywhere on the internet about this damn thing.....
so here is the steps i did.
It worked with SPL (USPL) 1.16 by jockyw.
1.boot the vox in bootloader [while the phone is off, hold camera button and plug-in usb]
2.open mtty with usb port. [if u dont see usb port search about it on forum]
3.enter "password BsaD5SeoA" without quotes
4.run the "emapiWlanMac" command [just to test]
5.run the "emapiTest" command [i dont know]
6.run the "emapiWlanEERW" command [i dont know]
7.run the "emapiInit" command [i beleive that this ressurect my wifi]
8.rerun "emapiWlanMac" command" it should be diffrent output.[if it worked]
9.run the "ruurun 0" to load the os after reboot[if u dont do that u will be on the bootloader again after reboot]
10.run the "ResetDevice" to reboot.
And Cheers!!!!
anyway this is the way it worked for me!

Hello akumalol:
-When you enter the commands did you receive a echo or nothing?
-The "password BsaD5SeoA" is standard, do you know if there's another for HTC Tornado?
Best regards,

you should see echo...
i think you have to enter right password to execute commands..

If I enter "info 2" I see echo, but when I enter "password BsaD5SeoA" I don't see echo, and I also I don't receive for the other one commands.
Any idea? maybe wrong password for my Tornado? How can you can the password?

hey dude i am not expert on bootloader, even in htc devices... i cant help u on that.. soz... it is just the way I fixed it on my vox.. maybe you can find it helpfull later... ;D

Hello!
I would like to ask you, I am prompted to enter emapiTest after MTTY
+ emapiTest
1. Power on WLAN
2. Reset WLAN
3. Switch MUX to WLAN
5. Init WLAN SDIO interface
6. DeviceID Test
DeviceID = 7030101
NOT EEPROMless configuration!
DeviceID [H2-H1-L2-L1] = F40D0080-B6FA0684-20000000-98C
-emapiTest
After the order is not the ID into 7,030,101 will WIFI?
By the way, my phone is a juno

I am a Chinese, and English is not good, sorry!
I would like to know where these orders are obtained?

sorry man cant help you... it worked on my vox this way...
and i dont really understand what are u trying to tell...

表于 2009-8-30 11:44 PM 只看该作者
Cmd>password BsaD5SeoA
Pass.
+ SD Controller init
- SD Controller init
SDHost controller change to mode 6
+StorageInit
SDInit+++
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDCmd8 Command response time-out. MMC_STAT = 80
SDInit - SD ver1.0
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd1 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
SDCmd55 Command response time-out. MMC_STAT = 80
CMD55 failed
g_cKeyCardSecurityLevel = 0
Type (0x1)(Operation mode flag): cOpModeFlag=(0x0).
Type (0x2)(Back color flag): cBackColorShowFlag=(0x1).
Type (0x5)(Background color value): g_wBColor=(0xC618) (0xC0C0C0).
HTCST
Cmd>emapiWlanMac
Notice: This MAC address takes effect only when your platform is EEPRON-less configuration. Please use (emapiTest) to verify it !
Copying GSM DATA image to SDRAM:00004000
Wlan data header ++++++++++++++++++++
Signature : 0xEE1251
UpdateStatus : 0x1
UpdateCount : 0x1
BodyLength : 0x2D9
BodyCRC : 0xFAE9B2E8
aDieId(0) : 0x0
aDieId(1) : 0x0
aDieId(2) : 0x0
aDieId(3) : 0x0
countryID : 0x0
dwWifiFlag : 0x1
Wlan data header --------------------------
0x00000008
0x00000000
0x00000028
0x00000032
0x00000000
0x00000000
Cmd>emapiTest
+emapiTest
1. Power on WLAN
2. Reset WLAN
3. Switch MUX to WLAN
5. Init WLAN SDIO interface
6. DeviceID Test
DeviceID = 7030101
NOT EEPROMless configuration!
DeviceID[H2-H1-L2-L1] = F40D0080-B6FA0684-20000000-98C
-emapiTest
Cmd>emapiWlanEERW
Copying GSM DATA image to SDRAM:00004000
Wlan data header ++++++++++++++++++++
Signature : 0xEE1251
UpdateStatus : 0x1
UpdateCount : 0x1
BodyLength : 0x2D9
BodyCRC : 0xFAE9B2E8
aDieId(0) : 0x0
aDieId(1) : 0x0
aDieId(2) : 0x0
aDieId(3) : 0x0
countryID : 0x0
dwWifiFlag : 0x1
Wlan data header --------------------------
Wrong format
Cmd>emapiInit
+emapInit default WALN EEPROM data
0. GSM data checksum value = 0x5475928D
1. GSM data checksum value = 0x5475928D
2. GSM data checksum value = 0x5475928D
Initialize wlan data success
-emapInit
Cmd>emapiWlanMac
Notice: This MAC address takes effect only when your platform is EEPRON-less configuration. Please use (emapiTest) to verify it !
Copying GSM DATA image to SDRAM:00004000
Wlan data header ++++++++++++++++++++
Signature : 0xEE1251
UpdateStatus : 0x1
UpdateCount : 0x1
BodyLength : 0x2D9
BodyCRC : 0xFAE9B2E8
aDieId(0) : 0x0
aDieId(1) : 0x0
aDieId(2) : 0x0
aDieId(3) : 0x0
countryID : 0x0
dwWifiFlag : 0x1
Wlan data header --------------------------
0x00000008
0x00000000
0x00000028
0x00000032
0x00000000
0x00000000
Cmd>ruurun 0
Cmd>ResetDevice

The results obtained above, phone still can not find wlan

Cmd>emapiInit
+emapInit default WALN EEPROM data
0. GSM data checksum value = 0x5475928D
1. GSM data checksum value = 0x5475928D
2. GSM data checksum value = 0x5475928D
Initialize wlan data success
-emapInit
That is weird... it says "Initialize wlan data success"...
I dont know man... try playing with emapitest commands... and find some more bootloader info/commands for ur phone... good luck

akumalol said:
i make this thread because i never found a solution anywhere on the internet about this damn thing.....
so here is the steps i did.
It worked with SPL (USPL) 1.16 by jockyw.
1.boot the vox in bootloader [while the phone is off, hold camera button and plug-in usb]
2.open mtty with usb port. [if u dont see usb port search about it on forum]
3.enter "password BsaD5SeoA" without quotes
4.run the "emapiWlanMac" command [just to test]
5.run the "emapiTest" command [i dont know]
6.run the "emapiWlanEERW" command [i dont know]
7.run the "emapiInit" command [i beleive that this ressurect my wifi]
8.rerun "emapiWlanMac" command" it should be diffrent output.[if it worked]
9.run the "ruurun 0" to load the os after reboot[if u dont do that u will be on the bootloader again after reboot]
10.run the "ResetDevice" to reboot.
And Cheers!!!!
anyway this is the way it worked for me!
Click to expand...
Click to collapse
after enter“emapiTest”,it make a error.what i ca see on the phone was “0%”.it just like rebuilding the system .i can not restar my phone ……finally,i have to rebuild my system .my phone is htc c750(shadow ).and i want to know which system you use.

As u can see this is the vox forum. so i used htc vox aka htc s710

can you tell me how the tool works ? maybe i would understand What should I do.When you fixing your phone ,was there a Rom ?

Solved-How To change My Sprint TP2 hardware keyboard to Spanish-Solved

Hi all.
I have a Sprint TP2. I want to change my hardware keyboard to spanish layout. I searched al the night and i cant found the way. so any body knows how to change my keyboard to spanish???
Thanks in advance.
SOLVED
After a long search I found the solution: YESSSSSSSSS
The keyboard mapping it's setting by the ".txt" file in the REG KEY:
"HKEY_LOCAL_MACHINE\SOFTWARE\Tegic\eT9\Ime\Keyboar dLayouFiles\07FF:"Name of the file.txt")
The ".txt" specifies the hardware keyboard mapping. These file are located in the \windows\ directory in the TP2. We can edit the file as we want. I edited my file like this:
"
//
// N O T E: This file must be saved as Unicode
//
// This file contains the virtual keys mapping table for the
// Raphael device World-Wide English QWERTY layout.
// The mapping table is defined as follows
//
// VK_TPOUND = 0x78
// VK_TSTAR = 0x77
// VK_TAB = 0x09
//
// We do not support escape value yet. So the key/char values should be
// entered explicitly or by encoding start with 0x
//
// Format:
// {VK VK1 VK2 CH1 CH2}
// VK -> value from keyboard driver
// VK1 -> key mapped, interpret by IME
// VK2 -> key to interpret when for press and hold
// CH1 -> symbols produced by Fn + key
// CH2 -> symbols in 123 mode
// CH4 -> Key Index
// Row 1
{1 1 1 ! ! 0xff}
{2 2 2 @ @ 0xff}
{3 3 3 # # 0xff}
{4 4 4 $ $ 0xff}
{5 5 5 % % 0xff}
{6 6 6 ^ ^ 0xff}
{7 7 7 & & 0xff}
{8 8 8 * * 0xff}
{9 9 9 ( ( 0xff}
{0 0 0 ) ) 0xff}
// Row 2
{Q Q Q ¡ ¡ 0x00}
{W W W - - 0x01}
{E E E É É 0x02}
{R R R R R 0x03}
{T T T + + 0x04}
{Y Y Y = = 0x05}
{U U U Ú Ú 0x06}
{I I I Í Í 0x07}
{O O O Ó Ó 0x08}
{P P P _ _ 0x09}
// Row 3
{A A A Á Á 0x0a}
{S S S S S 0x0b}
{D D D : : 0x0c}
{F F F F F 0x0d}
{G G G G G 0x0e}
{H H H \ \ 0x0f}
{J J J / / 0x10}
{K K K ' ' 0x11}
{L L L " " 0x12}
{0x08 0x08 0x08 0xF02E 0xF02E 0xff} // BACKSPACE - 0x08 = VK_BACK, 0x2E = VK_DELETE
// Row 4
{0x10 0x10 0x10 0x14 0x00 0xff} // CAPS - 0x14 = VK_CAPITAL
{Z Z Z ¿ ¿ 0x13}
{X X X X X 0x14}
{C C C Ç Ç 0x15}
{V V V V V 0x16}
{B B B ; ; 0x17}
{N N N Ñ Ñ 0x18}
{M M M ? ? 0x19}
{0x26 0x26 0x26 0xF021 0xF021 0xff} // UP - 0x26 = VK_UP, 0x21 = VK_PRIOR (PAGE UP)
{0x0D 0x0D 0x0D 0x0D 0x0D 0xff} // ENTER - 0x0D = VK_RETURN
// Row 5
{0xEC 0xEC 0x00 0x00 0x00 0xff} // FN - 0xEC = FN
{0xF2 0xF2 0x00 0x00 0x00 0xff} // MSG - 0xF2 = MSG
{0xEB 0x93 0x00 0x00 0x00 0xff} // SMS - 0x93 = SMS
{0xBC , , 0xE9 0x00 0xff} // SYM - 0xE9
{0x20 0x20 0x20 0x12 0x20 0xff} // SPACE - 0x20 = VK_SPACE, 0x12 = XT9 Menu
{0xBE . . 0x00 0x00 0xff}
{0x25 0x25 0x25 0x92 0x00 0xff} // LEFT - 0x25 = VK_LEFT
{0x28 0x28 0x28 0xF022 0xF022 0xff} // DOWN - 0x28 = VK_DOWN, 0x22 = VK_NEXT (PAGE DOWN)
{0x27 0x27 0x27 0xF3 0x00 0xff} // RIGHT - 0x27 = VK_RIGHT
{0xE9 0xE9 0xE9 0x00 0x00 0xff} // SYM - 0xE9"
Like you can see, it's pretty easy. If i want a accent vocal I just press the FN key follow by the vocal key, and voila.
Cheers
Actualization:
After solved my issue, "Sonje" from the "HTC Manía" forum (http://www.htcmania.com/showthread.p...d=1#post678520) suggest me the next link.
http://www.htcmania.com/showthread.php?t=67632
In the link "Superjuani" suggest a program, but I didn't test it, buy I share the link if you want to try it
http://www.htcmania.com/showpost.php...2&postcount=10

Could You helpme???
Hi,
any body???

please, i need your help.
This don´t run over touch pro2, please other solution.
http://wiki.xda-developers.com/index.php?pagename=Raphael_Keyboard
THanks.

Code.mscr for win4.2 Help!!!

Hi,
sorry but I don't know where to ask for help on this script and I am not familiar with the instructions.
If I'm wrong spostatemi section in the right one!
Code:
Errorlevel( "off" )
XCopy( "\SDMMC\TT7\MapSettings\*.*", "\SDMMC\Italia",True )
sleep 100
RegWriteDWord( "HKLM", "\System\CurrentControlSet\Control\Power\Timeouts", "ACSuspend",0 )
RegWriteDWord( "HKLM", "\System\CurrentControlSet\Control\Power\Timeouts", "ACSuspendTimeout",0 )
RegWriteDWord( "HKLM", "\System\CurrentControlSet\Control\Power\Timeouts", "ACSystemIdle",0 )
RegWriteDWord( "HKLM", "\System\CurrentControlSet\Control\Power\Timeouts", "ACUserIdle",0 )
RegWriteDWord( "HKLM", "\System\CurrentControlSet\Control\Power\Timeouts", "BattSuspend",0 )
RegWriteDWord( "HKLM", "\System\CurrentControlSet\Control\Power\Timeouts", "BattSuspendTimeout",0 )
RegWriteDWord( "HKLM", "\System\CurrentControlSet\Control\Power\Timeouts", "BattSystemIdle",0 )
RegWriteDWord( "HKLM", "\System\CurrentControlSet\Control\Power\Timeouts", "BattUserIdle",0 )
Sleep 200
RunWait ( "\SDMMC\TT7\TomTom_Navigator.exe" )
# If ( Not WndExists("ErrorLevel") )
If int FileSize ( "\SDMMC\Italia\MapSettings.cfg") >= int FileSize ( "\SDMMC\TT7\MapSettings\MapSettings.cfg" )
# Memorizza destinazioni
Copy( "\SDMMC\Italia\MapSettings.cfg", "\SDMMC\TT7\MapSettings\MapSettings.cfg",True )
sleep 100
EndIf
# EndIf
Exit
I would like to know which are the correct ones intruzioni to run this command: If int FileSize ("\SDMMC\Italia\MapSettings.cfg") > = int FileSize ("\SDMMC\TT7\MapSettings\MapSettings.cfg")
This command should compare the size of the two files, I read the instructions in English but do not seem too esaudienti ... ...
If anyone can help me, thank you in advance
Hello

[Completed] Upgrade Partition Size

Hi to all
First of all, thansk a lot for all hard job done for the all entire XDA Team. You helped us so much!
Well, I 'm starting into the world of TWRP, Custom ROM, CM, etc. All because I have a Tablet Genesis GT1440 that after a Update, (gt1440_update.img, 392MB) my tablet get two data partitions: One with 0.99GB and another with 2,09GB (no SDCard installed, just the Internal Memory).
And reading how to fix it, I got the page about the Unpacking/Repacking tool imgRepacker.exe
With that, I unpacking the rom I mentioned above and found a lot of files, but one called sys_partition.fex maybe solve my problem.
So I need some help to find out if is possible to edit this and solve the problem if the data partition. This is the file:
;---------------------------------------------------------------------------------------------------------
; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
;---------------------------------------------------------------------------------------------------------
;--------------------------------------------------------------------------------------------------
; 固件下载参数配置
;--------------------------------------------------------------------------------------------------
;****************************************************
; mbr的大小, 以Kbyte为单位
;****************************************************
[mbr]
size = 16384
;********************************************************************************************************
; 分区配置
;
;
; partition 定义范例:
; [partition] ; //表示是一个分区
; name = USERFS2 ; //分区名称
; size = 16384 ; //分区大小 单位: 扇区.分区表示个数最多2^31 * 512 = 2T
; downloadfile = "123.fex" ; //下载文件的路径和名称，可以使用相对路径，相对是指相对于image.cfg文件所在分区。也可以使用绝对路径
; keydata = 1 ; //私有数据分区，重新量产数据将不丢失
; encrypt = 1 ; //采用加密方式烧录，将提供数据加密，但损失烧录速度
; user_type = ? ; //私有用法
; verify = 1 ; //要求量产完成后校验是否正确
;
; 注：1、name唯一, 不允许同名
; 2、name最大12个字符
; 3、size = 0, 将创建一个无大小的空分区
; 4、为了安全和效率考虑，分区大小最好保证为16M字节的整数倍
;********************************************************************************************************
[partition_start]
;------------------------------>mmcblk0p2/nanda
[partition]
name = bootloader
size = 32768
downloadfile = "bootloader.fex"
;------------------------------>mmcblk0p5/nandb
[partition]
name = env
size = 32768
downloadfile = "env.fex"
;------------------------------>mmcblk0p6/nandc
[partition]
name = boot
size = 32768
downloadfile = "boot.fex"
;------------------------------>mmcblk0p7/nandd
[partition]
name = system
size = 1572864
downloadfile = "system.fex"
user_type = 0x2
;------------------------------>mmcblk0p8/nande
[partition]
name = data
size = 2097152
user_type = 0x2
;------------------------------>mmcblk0p9/nandf
[partition]
name = misc
size = 32768
;------------------------------>mmcblk0p10/nandg
[partition]
name = recovery
size = 65536
downloadfile = "recovery.fex"
;------------------------------>mmcblk0p11/nandh
[partition]
name = cache
size = 1048576
user_type = 0x2
;------------------------------>nandi, data image backup
[partition]
name = databk
size = 262144
;------------------------------>nandj, private data
[partition]
name = private
size = 32768
keydata = 1
;------------------------------>nandk, UDISK
[partition]
name = UDISK
downloadfile = "diskfs.fex"
verify = 0
So, I think if I correct this file with the corretcs values for data partition, may solve the problem.... or maybe the case is not so simple as I think.... But I am here to try it.
The Tablet is a Genesis GT-1440, with a Allwinner A31 chipset
Regards and thanks a lot for any help

Hello and thank you for using XDA Assist,
please create an account and ask in our Android Q&A section. The expert's there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist

Windows Mobile 6.5.3 | Where to switch USB Client Mode RNDIS -> Serial

Hi, is it possible to switch the USB Client Mode from RNDIS -> Serial (via Commandline or Registry )?
The RNDIS Interface will cause a BSOD under Win10
Thanks in advance

USB Client Mode can be switched with the following Registry Settings (a reboot is required to take effect)
Set Serial:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\ActiveSync\Address]
"IP" = hex:\
02,00,03,de,c0,a8,37,64,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00
[HKEY_LOCAL_MACHINE\Comm\USB Cable:]
[HKEY_LOCAL_MACHINE\Comm\USB Cable:\Parms]
[HKEY_LOCAL_MACHINE\Comm\USB Cable:\Parms\TcpIp]
[HKEY_LOCAL_MACHINE\Comm\USB Cable:\Parms\TcpIp]
"DNS" = multi_sz: "127.0.0.1"
"DefaultGateway" = multi_sz: "192.168.55.100"
"Subnetmask" = multi_sz: "255.255.255.0"
"IpAddress" = multi_sz: "192.168.55.101"
"DontAddDefaultGateway" = dword:00000000
"UseZeroBroadcast" = dword:00000000
"EnableDHCP" = dword:00000000
[HKEY_LOCAL_MACHINE\Comm\Tcpip\Hosts\ppp_peer]
[HKEY_LOCAL_MACHINE\Comm\Tcpip\Hosts\ppp_peer]
"aliases" = multi_sz: ""
"ipaddr" = hex:\
c0,a8,37,64
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
"DefaultClientDriver" = "Serial_Class"
Set RNDIS:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\ActiveSync\Address]
"IP" = hex:\
02,00,03,de,a9,fe,02,02,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00
[HKEY_LOCAL_MACHINE\Comm\Tcpip\Hosts\dtpt_peer]
[HKEY_LOCAL_MACHINE\Comm\Tcpip\Hosts\dtpt_peer]
"aliases" = multi_sz: ""
"ipaddr" = hex:\
a9,fe,02,02
[HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers]
"DefaultClientDriver" = "RNDIS"