How can I add a Profile? - Non-Touchscreen Windows Mobile Other

I've got the usual, Normal, Silent, Outdoor, etc...but I'd like to add a few others here. How do you do it?
Kermit Woodall

I've tried to do this. When trying to modify new profile's settings, blank screen appeard...

Related

SPB time and alarms

Hello:
I have SPB time and recently the alarms seem to have stopped working.
They work if I place a test alarm in the afternoon for example, but the ones in the morning to wake me up for work never go off.
I have tried, wakeupteak, and scarybears check notify, to no avail, I have re-installed SPB time and the alarms. I have rebuilt my unit from the ground up. Still the same problem!!
SPB time are out of ideas themselves.
Any ideas on what the problem may be, or can someone suggest an alternative clock/alarm program for the PPC for me to try.
Thanks.
Aame problem here. AlarmX from MTUX seems to work but it's not as pretty.
There are posts on the forum somewhere telling why this is. It's something like the device goes in to sleep mode (excuse the pun). The built in alarm works Ok (for me) and so does the alarm in Stop Time.
I've had problems with alarms for almost two years - I've found only two solutions:
Try SuperAlert from WhittakerMoore - it cured my alarm problems except when I had stuff which clashed with it, however it is commercial.
A more recent and radical approach which has also worked for me is as follows (you will need software which can modify the Notifications database, such as Anton Tomov's Pocket Mechanic).
The root of the problem is the CALNOT process which runs at midnight - it performs housekeeping and if it doesn't complete correctly, it fails to trigger the first alarm of the day (and therefore any subsequent ones until you turn the device on).
Use your product of choice to simply delete the midnight notification entry which runs CALNOT.exe - this means that the housekeeping isn't done every night but the alarms will be reliable, since it now cannot fail to complete(!). To make sure the cleanup does occur now and again, put a shortcut to CALNOT.exe in the startup folder. Yes, it makes startup after a soft reset a little slower but it's worth it I feel for reliable alarms. Alternatively you could run CALNOT manually. You must remember to remove the CALNOT notification after each time it runs (including timezone changes) as it reinstates its midnight entry each time.
Although I have over 350 entries in my calendar, I haven't noticed any degradation without the regular housekeeping but I have noticed the alarms working - it now wakes me every morning except when I forget to delete the damned entry after a soft reset.
Let me know how you get on.
Note: If anyone out there wants to knock together a tiny app. which runs CALNOT then removes the notification, I for one would be very grateful - I haven't had the time to do any WM coding yet.
I almost missed a plane because the alarm didn't ring so it's important to fix it. However:
simply delete the midnight notification entry which runs CALNOT.exe
Click to expand...
Click to collapse
how to find this program?
I searched at "calnot.exe" in the registry: nopes, searched in windows/startup: nopes. So how to find the program that calls calnot.exe to delete it? Or just delete the file calnot.exe?
Please help
henk-jan said:
how to find this program?
I searched at "calnot.exe" in the registry: nopes, searched in windows/startup: nopes. So how to find the program that calls calnot.exe to delete it? Or just delete the file calnot.exe?
Click to expand...
Click to collapse
mtbsoft said:
(you will need software which can modify the Notifications database, such as Anton Tomov's Pocket Mechanic).
...
Use your product of choice to simply delete the midnight notification entry which runs CALNOT.exe
Click to expand...
Click to collapse
Do NOT delete the program calnot.exe! Re-read what I wrote, in particular the need for software to edit the notifications database - THAT is where the entry is which needs to be deleted.
Do not quickly skim across the post details, getting half the picture then blindly blundering around in your device - that is the fast way to a hard reset!
Thanks for the quick reply. I didn't read it well, indeed, sorry.
So I deleted calnot from the notication queue and now it has to be fixed, apart from running calnot now and then? Do you (after a run) have to delete calnot again from the queue?
No worries, I just didn't want to be the cause of a hard reset.
Generally running calnot doesn't seem to restore the notification entry, there is a special system notification entry (which I don't recommend you delete) which restores it at each soft reset.
Good luck and let us know how you get on.
@mtbsoft. Thanks for you're warning. But now I have some troubble with calnot.exe : can't copy/shortcut it to startmenu as you mentioned, can't even rename the read only status and can't run it (i.e. after double clicking I don't see it in the notification database appear). Any sugestions?
Tapping on it will run it - it doesn't have a user interface so won't be visible. I think you've misunderstood about the notification - running calnot.exe manually WON'T put the notification back, that only occurs when you soft-reset.
I assume you are using the in-built File Explorer, you should be able to navigate to calnot.exe then tap and hold to select Copy. Now go to the \windows\startup folder and use the Edit menu at the bottom left to select Paste as Shortcut. calnot.exe is actually in ROM so you can't rename or delete it (easily).
It worked! I tried it several times like you described, but got the message it was in use, or something like that. But now it's ok. Thanks a lot, the alarms seems to work properly.
@mtbsoft: I found a program/tweak that may solve the problem. It's free.
Look at http://www.pocketpcfreewares.com/en/index.php for wakeup tweak
All wakeup tweak does (to my recollection) is adjusts the Power up timeout that so many others also do - the results are variable and it doesn't work for me. I actually found a better solution in the shape of SuperAlert from www.whittakermoore.com - finally 100% reliable.
I didn't no, learnt again something. I'll give it a try. Thanks

ring tone keeps changing to default

I tried doing a search, but struggled finding something. Every single rom I flashed, when I go into phone settings and I click ok, it goes to the ring page setting and I see my ring tone change to some default. I could guess maybe it's due to x-button 1.0 but not sure. Does anyone have any clue for a fix?
I don't exactly follow. Just to clarify, you go to Start -> Settings -> Phone change your ringtone to something other than the default, hit "OK" and instead of closing/minimizing, it takes you directly back to the "Phone" settings page and it's set itself back to the default ringtone?
Is that what you mean?
thomassster said:
I tried doing a search, but struggled finding something. Every single rom I flashed, when I go into phone settings and I click ok, it goes to the ring page setting and I see my ring tone change to some default. I could guess maybe it's due to x-button 1.0 but not sure. Does anyone have any clue for a fix?
Click to expand...
Click to collapse
sometimes I don't get good reception at the location I'm at so I go into the phone settings, hit network tab and select find network. I click ok and then it sends me back to the phone tab where my sounds are at and my ring tone is changed to the default. Whenever I do this, I constantly have to change it back to my original ring tone.
I know it's a small picky problem, but just never had this problem in WM5.
Well, that is strange. I couldn't replicate it.
Do you let your battery die a lot? I've heard a lot of Wizards can often revert to default settings if your battery goes completely dead.
thomassster said:
sometimes I don't get good reception at the location I'm at so I go into the phone settings, hit network tab and select find network. I click ok and then it sends me back to the phone tab where my sounds are at and my ring tone is changed to the default. Whenever I do this, I constantly have to change it back to my original ring tone.
I know it's a small picky problem, but just never had this problem in WM5.
Click to expand...
Click to collapse
I find this happens to me as well... and I never let my battery completely die. I wonder if it's related to the fact that my main phone ringtone is on the storage card... with the Wizard's notoriously 'wonky' miniSD slot, maybe the connection is occasionally interrupted and causes the problem.
Same problem here, using mfrazzz Crossbow Reloaded 1.5. I use a mp3 file as my ringtone, which is in the root of my storagecard.
I have a similar issue and I think it is down to some registry settings and where your ringtones are. I built my ROM with an additional Ringtone and then set this to be the default ringtone through an .RGU file. It works as long as you don't change it.....
If I change the rington (or turn on vibrate) then I can never re-select the ringtone, even though it is listed. If I edit the registry to change it, it works, but obviously editting the registry to change ringtones is a bit OTT. I have been playing around with this as I have a spare Wizard so if I find anything else I will post on this thread.
The registry keys in question are:
Code:
HKCU\ControlPanel\Sounds\
HKCU\ControlPanel\Sounds\Ringtone0
HKCU\ControlPanel\Sounds\RingTone2
HKCU\ControlPanel\SoundCatagories\Ring
HKCU\ControlPanel\SoundCatagories\RingPreview
HTH
Andy
OK, quick update. The file I had as my default ringtone was 'Cellular4.wav'. I added this to the ROM and changed the references in the registry (.RGU file) to point to this file. Now if I changed it via Phone, Options then the changes would take effect, however selecting this file again via the same options didn't work and the file would appear to be selected but was the previous option (filename or vibrate), manually changing this via the Registry worked however.
I have now re-encoded the file to be a .WMA file and re-built the ROM and it now appears to work. The file needs adding to the registry entry to allow it to be selected if the file isn't in the \Windows\Rings folder:
Code:
[HKEY_CURRENT_USER\ControlPanel\Sounds]
"Ringtones"=multi_sz:"Ring-WindowsMobile .wma", "Ring-Standard .wma", "Ring-Vision .wma", "Cellular4 .wma"
HTH
Andy
I'm suprise I'm not the only one with this problem. So adding your filename to the registry fixes the problem?
ADB100 said:
OK, quick update. The file I had as my default ringtone was 'Cellular4.wav'. I added this to the ROM and changed the references in the registry (.RGU file) to point to this file. Now if I changed it via Phone, Options then the changes would take effect, however selecting this file again via the same options didn't work and the file would appear to be selected but was the previous option (filename or vibrate), manually changing this via the Registry worked however.
I have now re-encoded the file to be a .WMA file and re-built the ROM and it now appears to work. The file needs adding to the registry entry to allow it to be selected if the file isn't in the \Windows\Rings folder:
Code:
[HKEY_CURRENT_USER\ControlPanel\Sounds]
"Ringtones"=multi_sz:"Ring-WindowsMobile .wma", "Ring-Standard .wma", "Ring-Vision .wma", "Cellular4 .wma"
HTH
Andy
Click to expand...
Click to collapse
thomassster said:
I'm suprise I'm not the only one with this problem. So adding your filename to the registry fixes the problem?
Click to expand...
Click to collapse
I think the file needs to be there as well, plus it needs to be a .wma file (as opposed to a .wav or .mp3), I am not sure about the extra space in the filename (cellular4 .wma), however it is working fine for me now.
Andy
I have been suffering from this too but couldn't find the root cause nor repeatability.
One thing I did find is that switching from Internet Calling back to calling via GSM reset the ring type back to default, even though when initially going from GSM to Internet Calling the latter rang correctly.
I have this problem as well. If the tone is highlighted when I press OK it goes back to default... Click play and then stop..... now it is not highlighted, and it will stay!!
It just doesnt like you Badbert..
happened for me too, then i installed Signed_Tmo Ringtones that comes with tmobile rom. It fixed it. Hope this works for you as well.
wow...it worked, thanks!
nycelitemaster said:
happened for me too, then i installed Signed_Tmo Ringtones that comes with tmobile rom. It fixed it. Hope this works for you as well.
Click to expand...
Click to collapse

Profiles not visible sometimes

I have noticed that my Profiles aren't visible sometimes. It doesn't matter how I try to view them they are invisible. Other times they are all there. For instance: I can select the Quick List and the first 5 items are there but the profiles items 6,7,8,9,0 are invisible. I can also go to Profiles through Control Panel - same thing. Other times they are all there.
I am running Win Mo 6.1 Dr. Martin Gonzo and also Smartoolkit build RC08
Does anyone have any ideas? Have you seen this before? I may be missing something simple.
Thanks,
Code
After more investigation I noticed that the application data\profiles folder is blank. Should my profiles be listed here? If so, is there a way to re-establish them?
Any ideas please. I'm new at this

Need MORE control of Fuze sound profiles

Hello. Here is what I am looking for. So far I am very frustrated with my FUZE with this one feature.
I would like to have more control of the phone profile options like I used to have on my Blackberry phones. Basically I want to be able to make set custom profiles as I want them.
For example. With my old phone I was able to use an "advanced" feature in the phone profile section to create what I called a "Night" setting. When this setting was activated the entire phone was on silent (texts, emails, etc, everything was silent) EXCEPT the phone. The phone would ring if I received a call. So it was basically a "phone only" setting. This was perfect at night because I would only receive a call if it was a real emergency.
I KNOW that I can go into the Sounds and Notifications settings and turn everything off except the phone, but I have to do that manually and if I change phone settings everything goes back and I have to again manually do what I want.
I HAVE tried the Inesoft program and the spb phone suite. both have profiles built into them, but no way to do what I mention above with my "night" setting.
Is there a program/script/plugin that will accomplish this?
Thanks for any help with this.
phonealarm...I do exactly that with this program on my Fuze...
peeps said:
phonealarm...I do exactly that with this program on my Fuze...
Click to expand...
Click to collapse
peeps - I am using Mobile Shell. Do you have any idea how to use PA with it.
If not, can you just tell me how to use the profile section of PA
TVDinner said:
peeps - I am using Mobile Shell. Do you have any idea how to use PA with it.
If not, can you just tell me how to use the profile section of PA
Click to expand...
Click to collapse
EmailScheduler60.CAB
try this and see if it works...email scheduler...
slawcop - thaat is an interesting program, but i am unsure how it solves my current problem/question/situation?
TVDinner said:
peeps - I am using Mobile Shell. Do you have any idea how to use PA with it.
If not, can you just tell me how to use the profile section of PA
Click to expand...
Click to collapse
I don't use MS, but doesn't it still allow Today plugins to run? I would imagine if the today plugin is running, it will work with MS, but it might be best to check out the SPB Club forum or the PocketMax Phonealarm forums...
Phone Alarm
I used phone alarm with my 8925, but can't get it to work with the fuze. my main use was setting the alarms since i use it for pages also. Can't get the alarm to go more than once.
Try gProfile
Search for gProfile. It's super handy, and... as far as I can tell, doesn't require a today screen plugin.
You should be able to find it fairly easily... using The Google. If not, PM me and I'll see if I can dig up where I found it. It was free...

Disable Add User function

I have a rooted Xperia Z lollipop. I want to disable the User add function as I am giving my kid access to the phone with screen time app. How can I make that disappear?
I have set the user_enable to "0" in the setting database but it doesnt work. Do I need to edit build.prop?
Have a look at this https://www.reddit.com/r/Android/comments/323l36/android_5x_how_to_disable_guest_additional_user/
Make sure you have backup of files you edit, it's very easy to **** up when manually editing files
edit: lol just noticed xda censors swear words, this reminds me that i have seen a setting in maybe gravitybox or some app where u can remove add use or switch guest from notification bar on top, which is probbaly what you want to do, i will check around and see where i found it.
EDIT: Another thing I just tried and it works well
Add the following lines to your build.prop
fw.max_users=1
fw.show_multiuserui=0
Change the max users number to however many users you have on phone now. I did the database change earlier too, and after adding these two lines there's still icon on lock screen to switch users but it doesn't do anything, i got a long loading the first reboot, but that maybe because i am also playing around with xposed modules, just force reset the phone by pressing volup and power for 3 seconds and it should boot. Hope this helps.
I read it. Did as said. Added fw.max_users=1 but did not add fw show... The phone went into boot loop...
Can you share your build.prop? I wonder what I have done wrong.... Duh
Do I need to add "ro.sys." before the fw.max and fw.show?

Categories

Resources