Microsd Flashing - Tilt, TyTN II, MDA Vario III Windows Mobile ROM De

hi,
i have a big problem with my kaiser, since yesterday there are lots of bugs :
- i can't establish an activesync connection
- when i slide the keyboard, the screen don't turn
- tom tom doesn't work anymore
- the OS is really slow
- i can't phone because i'can't type the number with the keyboard or by touching the screen.
And i don't manage to find why....
So i would like to flash using the micro sd, i'm trying with the dutty's touchflo rom renamed by "KAISIMG.nbh" and when i see the tri-color screen i try to press power button to start flashing but .... nothing...neither with the others buttons...
So, please what are the things to do to perform a microsd flashing ???
thank you very much in advance and i apologize for my english

tseu said:
hi,
i have a big problem with my kaiser, since yesterday there are lots of bugs :
- i can't establish an activesync connection
- when i slide the keyboard, the screen don't turn
- tom tom doesn't work anymore
- the OS is really slow
- i can't phone because i'can't type the number with the keyboard or by touching the screen.
And i don't manage to find why....
So i would like to flash using the micro sd, i'm trying with the dutty's touchflo rom renamed by "KAISIMG.nbh" and when i see the tri-color screen i try to press power button to start flashing but .... nothing...neither with the others buttons...
So, please what are the things to do to perform a microsd flashing ???
thank you very much in advance and i apologize for my english
Click to expand...
Click to collapse
i have the same problem i used to flash my 8525 via microsd all the time w/o formating the card or even emptyinng it without any problems since i have vista but have not been able to get it to work on the 8925 if anyone can get it to work please post. thanks in advance

okay, once you've formatted the card with fat32 and not fat it works !

Related

Help: My German O2 Mini dead

Dear all expert,
While trying to flash my German Black O2 mini from Ger to ENG. (Using MAupgrade_noID)
After some steps, the o2 mini turn black and display
"Serial V1.02"
At this time, even though I softreset or hardreset the device,
the same wording also appear and can't further boot.
I even use SD card method but the same wording still appear again.
Can any expert teach me how to rescure my device?
Thanks
Are you sure you did the SD-method right?
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available. Now do the following:
Get ntrw from this site
Get a 512 MB SD-card (maybe a 128 MB one will work, too, but I am unsure about this).
Put ntrw into C:\
Extract the RAR into C:\, which should produce C:\11301bs.nb1
Enter the following into the command line at C:\:
Code:
ntrw write 11301bs.nb1 [your SD-card drive letter, e.g. I:]
, ignore error messages
Fully load your Magician!
Disconnect your Magician from anything, especially USB
Shutdown your Magician (press power button)
Put the SD-card into the Magician
Put Magician into Bootloader-Mode (Camera+Power+Reset at once, until you have the "Serial 1.02" screen w/o backlight)
Wait some seconds for "Press power to flash" to show on screen. Do just that.
This might just work.
Thanks KK.
What's wrong is that, it seem the bootloader is dead.
WHile I input the SD card while enter into the bootloader.
The screen still display "serial V1.02" and hold it.
No further wording like "Press power to flash it" etc.
Is it the bootloader is dead?
I do not think so. Make sure you shut down the Magician before placing the SD-card with a fresh ROM-image written to it into your device. Power on into Bootloader-Mode afterwards.
Another option to check your loader is the following:
Shutdown the Magician
Go into Bootloader-Mode
Wait for "Serial 1.02" to be displayed
Connect to PC via USB. The Bootloader should display "USB" shortly after connecting. If it does not: Maybe really you managed to kill your loader.
What exactly did you do? I used the NOID-Tool too, and had absolutely no problems with it. Besides: I also have a bootloader version 1.02.
kk
While plugging the usb cable to the device , yes, it show "USB" on the screen then.
However, when I use the romupdate.exe and try extract the rom into SD card at this time. After pressing "d2s" , the device shut down at once. No words appear on the screen.
Do you know what does it mean?
Besides, can you tell me what is "NOID-Tool" ?
thanks
The NOID-Tool would be MAupgrade_noID, which you used.
I am not sure about it, but as your device does not boot into the OS anymore, it seems reasonable to assume, that the ROM in your device is not valid anymore, due to errors while flashing it in the first place.
So - if there is no valid ROM, there is nothing, which the bootloader can write onto the SD-card.
Please try the method suggested in previous postings before anything else. If all this fails, I have no further suggestions - your device might really be dead.
You can try regular upgrade insted of doing it through SD card.
Danload shipROM, extract it and use MAupgradeNOID to run ROM and that is all you should do.
kk said:
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available
Click to expand...
Click to collapse
Hi,
Can you upload the rom again pls? Someone removed it from the ftp site. Like to give it a try, but can't find a prepared BS-rom anywhere.
Thnx, M
kk said:
At OS 1.13.01 GER Radio 1.13.00 BigStorage you will find the latest german BigStorage ROM image available
Click to expand...
Click to collapse
Hi,
Can you upload the rom again pls? Someone removed it from the ftp site. Like to give it a try, but can't find a prepared BS-rom anywhere.
Thnx, M
Hi there!
The FTP-master kindly converted the file to ZIP format. It is now available here: ftp://xda:[email protected]/Magician/BigStorage_ROMs/DE_T-Mobile_1.13.01.zip.
Remember: I used a 512 MB SD-card to create it, so maybe it won't work with smaller ones (but I think it should, since the ROM stored within this SD-card-image is no more than 64 MB in size).
Hi KK,
I found it along with the other BS roms and feel ashamed I couldn't find them. I tried it first with my 512MB card, but the cardreader won't write the file (no question about formatting whatsoever). Tomorrow I'm going to try with my 256MB mini SD card, which I know will be written by NTRW. I'll let you if I succeeded.
Regards, M
It works for sure with my 512 MB Kingston SD-card!
Don't bother about an error at the end of the ntrw-writing process. That's absolutely normal, since it would like to make the SD-card-drive the current drive, which is not possible after the writing process, as the SD-card now contains a ROM-image instead of a valid filesystem.
Hi KK,
Didn't manage to get it flashing. I used both cards but my magician doesn't accept the image somehow. No sign of any message like 'press power to load', not on serial nor on usb connection in the bootloader. It did work before with my own dumped rom, but lost the storage than, but it did accept the rom. Now it keeps awful quiet, I copied the first bytes and all, so maybe I'll give it a try with another rom. I want to sort this problem out.
Cheers, M
nbfdec made my big storage
Hello KK,
Yesterday I tried with the steps from hlt, out of the radio 1.13 upgrade thread http://forum.xda-developers.com/viewtopic.php?t=32274. It doesn't involve any rom dumping or sd-card action whatsoever and it worked first time.Just one tool: nbfdec and a shipped rom. It is fast and simple. Thanks for your advices, hope others will try this method as well, because it is much easier than bigstorager and bytecopy etc.
M
The "no SD-card required"-method in this thread only works for shipped ROMs. The ROM i prepared is a combination of the latest german OS & Radio versions plus BigStorage, which is to my knowledge _not_ available in this combination elsewhere, and should therefore be the most up-to-date ROM usable for any german magician user with very few simple steps.
Since you require a non-german version, my ROM will not be appropriate for you, but this thread started out with a cry for help with a non-booting magician, and I thought, that my ROM-modification would be of some help here due to the simplicity in applying it and its actuality.
But be it as it may.
KK,
I had the same problem as Netmon, only bootloader and I couldn't make the sd flash. That's why I was looking for a decent rom. With the tooling found on this site I probably could turn my magacian from German to English again. Since all my storage was gone I could take the risc.
I solved my problem with the upgrade 1.13 thread and that method would have worked for Netmon to I guess, just put the magacian in bootloader connect to usb and flash with a German shipped rom or an altered version.
Anyway thanks for your time, M
Dear rilazi and all
The device has been proofed for dead by the manufacturer.
The symptom is
1) romupdate.exe can't detect the device
2) press softreset button can't reboot the device to normal screen, only display "Serial V1.02" on the screen
3) Use SD card method doesn't got any respone from the device, keep displaying "Serial V1.02"
4) Use shipped rom (with MaupgradeNo_id.exe) also can't detect the device.
I don't know whether it the V1.02 version of bootloader problem or not.
Before, I try to flash many time which it V1.01 with no problem.
So, all of the V1.02 German device (Black color Mini) should pay attention to it.
I have a bootloader v1.02, too. Absolutely no problems with flashing on my side.

OLTP's rom upgrade & BIG Storage guide

Hi all,
Almost everytime I check the forum I see a lot of rom upgrade & BIG Storage questions. Apparently not everyone is familiar with the wiki and search options on the board. That's a shame cause almost all the questions are answered in the already existing threads. So why a new thread about the same topic?
1. I'm chauvinistic and want my name on the board ;-)
2. To aggregate a part of my knowledge in one place for easy access.
3. To promote the wiki
- So if you tried to upgrade your rom and got an error 120: follow this description http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
- If you failed in upgrading your rom somehow & now you're stuck in the bootloader: just make sure usb connections are allowed in Active Sync, connect your magician with usb to your PC and run the rom upgrade program again.
Sometimes it helps at this stage to downgrade ActiveSync to version 3.8 (see the post from benenglish).
- If you need to go to bootloader for any reason (including incorrect rom upgrade) press 'camera, power and soft-reset' all at the same time for some seconds, till your screen fades and reads: Serial V1.0x. When you connect it to usb it should read ' usb V1.0x
- If you want to change the language from your magician (not including from or to Greek, cause those roms and devices are protected), just use http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade again.
- If you want to flash your magician with a charmer or any other rom, please don't you will loose your device when you kill your bootloader and that's very likely to happen while flashing a not suitable rom.
- Want a WWE BIG Storage rom the easy way? Follow http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade and download ftp://xda:[email protected]_NK.nbf/BIG_Storage_nk_for_rom_1.13WWE.zip This NK.nbf is patched for BIG Storage, you only need to put it in the directory with the extracted shipped-rom.
- Want a BIG Storage rom in any language the easy way? Download a shipped-rom from the ftp or any telco and follow http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
- Want to get BIG Storage via a SD Card flash, read it here http://wiki.xda-developers.com/index.php?pagename=MagicianSDflash
- Don't know what BIG Storage is? It is your ext-rom (with the operator customization cabs) exchanged for a larger internal Storage folder. So remember to backup those cabs before upgrading.
- When you want to revert from BIG Storage to the original Storage and ext-rom combination, make sure you put > 8MB data in your Storage folder before flashing it back with a normal rom. Otherwise you'll loose your Storage folder completely :-(. Seems that this might be a solution & doesn't work for everyone. Try it if reverting with empty \Storage folder isn't successful.
Any questions left, I guess so. Now don't be scared and put them on the board, nobody is going to eat you (at least not straight away) and someone will answer.
But remember that when this topic is still visible in the first page of this board I will probably stop answering new threads about BIG Storage and rom upgrading questions, I've done that for 5 months now and I'm starting to loose my interest.
Regards, M
Ps If you're really stuck in a rom upgrade & can't get it working, last resort is to pinpoint me to a location where I can download your rom-dump or the shipped-rom & I can prepare it for you. All it takes is a cup of coffee on my, for now, virtual world trip. Got Italy, Cyprus, Argentina, Asia, UK, Germany, Belgium, Greece, Turkey & US allready. So if you're living in any other country, especially Indonisia, Australia or New Zealand, be my guest.
Great job OLTP..
Your the man :lol:
- If you failed in upgrading your rom somehow & now you're stuck in the bootloader: just make sure usb connections are allowed in Active Sync, connect your Magician with usb to your PC and run the rom upgrade program again.
Click to expand...
Click to collapse
AND USE ACTIVESYNC 3.8
My upgrade was stuck at this stage - removed Activesync 4.0 - Installed 3.8 and ran the firmware update again - its now "Upgrade Radio Stack - Please wait" with the progress bar going along on the screen.
Hope this helps
I've heard/read more complaints about Act.Sync 4.0. Though 4.0 is working flawless on my side, every contribution that works is valuable information. I updated the first post with it.
Thanks
Big storage
I did a big storage for my Mini by using a copy of my rom, changing the bytes as told in the guide to upgrading with a HEX Editor. I have installed programs to new storage gained but my main memory is showing very little memory. I have no programmes installed in main memory. What should I do now ?
How much memory have you got free. I got now, on my fully loaded device, 9.6MB storage & 22.5MB program memory occupied.
Did you happen to load all the cabs you copied from your ext-rom again? Those cabs install in RAM.
Cheers, M
stotage lost
pls help... i lost my storage when i flash my mini in my stock shipped rom i followed instruction of olps to soted data at least 8mb of files but it didnt works still lost my storage...
how can i back it again..is there any hope?..
thanks
First thing to do is to load the BIG Storage rom again. This should give you back the \Storage folder.
Now did you use the same rom version for BIG Storage as your original rom version? Some do claim it needs to be at least the same country version.
So pls try to revert to the same version only without BS & you can always try with an empty \Storage folder.
Seems that some tricks work out different on several devices.
Good luck, M
First thing to do is to load the BIG Storage rom again. This should give you back the \Storage folder.
Click to expand...
Click to collapse
thanks i got my storage is back...
Now did you use the same rom version for BIG Storage as your original rom version? Some do claim it needs to be at least the same country version.
Click to expand...
Click to collapse
yes i flash it wid the same version i followed the instruction on your post to be able to back the extended rom..
ill try again for the 2nd time...ill post if i succed
many thanks oltp
Can I upgrade my Mda compact 2 also with a sd-card like the compact ?
When I make a hardreset with the card in the slot, i cannot chosse to install from sd-card.
That's something I don't know. Try one of the board's for WM5 devices like the Wizard. Maybe you can find your info there.
Success, M
[edit] could you append it here too pls, if you find it?
Hi OLTP,
Right now I have 8.04mb free in storage memory (big hack). In MAIN memory around 3.10 mb in program memory (in use 23.47 mb). Storage (main) - in use 28.29 mb and free 2.55 mb. This keeps going less and less so from time to time as I use and close programs. So I keep doing a soft reset. I get critical memory short error. What do I do.
Should I flash with my saved original ROM (the one I had before doing the hack) and then immediately flash the saved Big Rom ? Please let me know. You are the Guru.
@ Galahad: What kind of software did you install after the update? & how's the memory pressure right after a hard-reset (don't forget to make a proper backup first)?
Do you use cabinstl to install cabs to another location then 'default' (which is RAM)? & tell Act.Sync to install to Storage or Storage Card, otherwise your RAM will be used up very soon.
My advice no need to reflash right now, a hard-reset should be sufficient to see what is causing your prob.
M
After the hack I had installed couple of commercial software, all into storage memory thru active sync which prompts you where you want to install. I choose storage memory (26.92). I keep doing this for all the commercial software I need to install. When I finished doing this I had 6 mb free. so far so good. Then I started installing cabs files from Ext Rom copy on harddisk, with cabinst. These were smart dial cab, O2 connect and a few other (which I thought necessary) cab files. These too I installed into storage memory. If my memory serves me right, I started experiencing a sudden slide down in memory after this. Before this I had around 25 mb memory free. Then suddenly the slide down in memory. In fact Resco today plug in shows me the dramatic slidedown as if the memory is getting sucked down a black hole.
I will do a hard reset as suggested by you and then load my software into storage memory. This time I will not install cab files from Ext Rom. Is that OK ?
Your O2 software is def. causing your probs. If you need some apps from it, try WinCECabManager. With it you can see which files are stored where on your device. After cab installation you can move them to eg. \Storage\Windows & change all links & reg keys referring to those files. Or change tea cab-file of course. It can take some time, but ves a huge amount of RAM.
M
Thanks ! I will try your suggestion. Have never used WINceCab Manager. Hope it is not too technical.
Not for me, it's a bit like explorer. But then again I'm not standard.
Some good news !
Like I said, I had around 24 mb free memory after the big storage hack (after installing all applications, whether in storage memory or storage card).
The good news is that all my FREE MEMORY has come back. Don't know really how it happened. I was using my blue tooth device which I switched thru the icon on the screen bottom right.
In error I touched the icon to rotate screen orientation. When I finally got my orientation correctly, I also got all my lost memory.
IMAGINE THAT !
Thanks for all your quick responses and great help you gave me. I will surely emulate you helping ways.
oltp said:
Hi all,
- Want a WWE BIG Storage rom the easy way? Follow http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade and download ftp://xda:[email protected]_NK.nbf/BIG_Storage_nk_for_rom_1.13WWE.zip This NK.nbf is patched for BIG Storage, you only need to put it in the directory with the extracted shipped-rom.
But remember that when this topic is still visible in the first page of this board I will probably stop answering new threads about BIG Storage and rom upgrading questions, I've done that for 5 months now and I'm starting to loose my interest.
Regards, M
.
Click to expand...
Click to collapse
Dear OLTP, I am not able to find the patched nk.nbf on the ftp. Kindly check it is not there.
When I use nbfdec.exe for decoding the NK.nbf it gives me crc error and the decoding fails. whereas with the same set of NK.nbf,ms.nbf and radio.nbf I have success fully upgraded my magician to WWE1.13 with radio1.13 Kindly help

[solved] Palm 750 wm6 speedup options

Hi all, im new here in terms of posting but have been reading for a while now.
I have a Plam Treo 750 vodafone which is unlocked. I installed vodafone wm6 update on it a month ago... but since then i've stopped using the phone due to this:
I'm used to fast systems such as my linux desktop and i was really frustrated how the wm6 interface is slow. Even with few progs installed the phone gets very sluggish and hanging up calls even takes time.
Now here's my question:
Is there any way to speedup WM6 ? or install a custom WM6 that is faster ?
I tried Rest of the World wm6 ROM but it wouldn't install on my phone when i opened the installer it would say not compatible.
Would this speedup my phone ?
http://forum.xda-developers.com/showthread.php?t=345748
What should i do... i really love the phone and its features... but i just want wm6 to run faster so that the phone is usable.
thanks
blip said:
Hi all, im new here in terms of posting but have been reading for a while now.
I have a Plam Treo 750 vodafone which is unlocked. I installed vodafone wm6 update on it a month ago... but since then i've stopped using the phone due to this:
I'm used to fast systems such as my linux desktop and i was really frustrated how the wm6 interface is slow. Even with few progs installed the phone gets very sluggish and hanging up calls even takes time.
Now here's my question:
Is there any way to speedup WM6 ? or install a custom WM6 that is faster ?
I tried Rest of the World wm6 ROM but it wouldn't install on my phone when i opened the installer it would say not compatible.
Would this speedup my phone ?
http://forum.xda-developers.com/showthread.php?t=345748
What should i do... i really love the phone and its features... but i just want wm6 to run faster so that the phone is usable.
thanks
Click to expand...
Click to collapse
Got it right mate! Nice research!
can anyone please help me install "WM6 AKU0.7.0 WWE Cooked ROM Lite"...
http://forum.xda-developers.com/showthread.php?t=345748
I've never done something like this before and have no idea how to begin.. I can't find any guides only random text throughout the posts so i don't know what applies to me and what doesn't. I'm really worried about damaging my phone by doing something stupid.
My Phone:
750v from vodafone UK with vodafone wm6... but it was unlocked by previous owner... since i can use it on other phone providers in other countries. I have usb cable and 1Gig microSD.
The installation notes of the rom say i need to install Hard-SPL then flash radio then flash OS. Now for Hard-SPL do i need to install it if my phone is unlocked because i read some confusing posts there... then what is a radio flash do i need to do that ? how does it affect radio...
then after that i need KaiserCustomRUU.exe to flash the rom... i only found a post about CustomRUU with "RUUWrapper.zip" is that the same thing... sorry but i'm really confused and need someone to guide me through the process for my first time if possible.
You are ready to go. Download the ROM from Chaimd on the 750 Upgrading thread, rename it to CHEEIMG.nbh (the ROM file name the 750 expects to see) and copy it to the root of your miniSD card.
Insert the miniSD card, hold down the bottom right button on the side while you do a reset and the bootloader will start. And away you go.
Make sure you backup (backup program is best) all your data - it starts you out with fresh device and default settings. ROM works perfectly - fast and lots of extra storage.
txzman said:
You are ready to go. Download the ROM from Chaimd on the 750 Upgrading thread, rename it to CHEEIMG.nbh (the ROM file name the 750 expects to see) and copy it to the root of your miniSD card.
Insert the miniSD card, hold down the bottom right button on the side while you do a reset and the bootloader will start. And away you go.
Make sure you backup (backup program is best) all your data - it starts you out with fresh device and default settings. ROM works perfectly - fast and lots of extra storage.
Click to expand...
Click to collapse
Thanks txzman for the info. But just to be sure i understand... you're saying i don't need to install Hard-SPL from:
http://forum.xda-developers.com/showthread.php?t=334100&page=1
Nor do i need to flash the radio ?
UPDATE:
ok i didn't install Hard-SPL or flash the radio.
I tried to install the rom straight away... i put the ROM on my memory card root and renamed it, then did the reset with sidebutton...and i got to the wierd colors screen and nothing happenes after that.
It says on the screen:
Palm Tr
IPL-0.20
Palm Tr
SPL-0.24.0000
In the end nothing happens... this method doesnt work. i tried using KaiserRUU.exe update method but also that doesn't work it gives me and "Error [260]: Connection" even though activesync is connected... please tell me what i can do to install this rom.
i posted the question in the thread for the cooked rom. i guess this is not the right place to ask thus no one is replying.
sd needs to be formatted fat32 - re-format card to fat32, re-copy cheeimg and try again. Google or search here for the available formatting apps.
INSTALL HARD-SPL FIRST....
i can't stress this enough...
blip said:
Thanks txzman for the info. But just to be sure i understand... you're saying i don't need to install Hard-SPL from:
http://forum.xda-developers.com/showthread.php?t=334100&page=1
Nor do i need to flash the radio ?
Click to expand...
Click to collapse
If your Palm Treo is unlocked, you still need to install Hard SPL but just run step 1 and ignore step 2 & 3. This will allow you to flash your Treo with ROM's other than your provider as well as modified/cooked ROM's like the one made by Chaimd.

[WORKING!] Android on XDA Orbit 2

Since I posted a thread: http://forum.xda-developers.com/showthread.php?t=675311 and nobody could help me. I spent the past 5 days trying to get it to work and did it successfully (through haret).
Here's how to did it:
1. Download this .RAR I put together that includes:
-Eclair
-haret
-default.txt
2. Edit the "mddi.width=320 mddi.height=480" part of the "default.txt" to your needs. (either 320/480 or 240/320)
3. Put the content of the folder "android-orbit2-eclair" to the root of your SD card so it should be something like this:
Code:
-(D:) SD Card [COLOR="Red"](root)[/COLOR]
--conf
--media
--default.txt
--haret.exe
--initrd.gz
--rootfs.img
--system.sqsh
--zImage
4. Navigate to the SD Card (start>programs>file explorer>storage card) and click on the "haret.exe"
5. Once that has loaded up click "run" (about 3 lines down on right side)
6. Just wait, Give it chance to do its thing and simple... Android running on your XDA orbit 2.
any problems, reply to this thread and I will try to fix.
Thanks, James
it dosent work on my htc touch cruise.
I click on Run, and the screen becomes gradually black, and that finished as that… nothing any more occurs.
The screen is lit, but is black, and nothing occurs.
New problem now: I have the same message than you :
Code:
sh:2: unknown operand
losetup: /dev/block/loop 1: No such file or directory
Failed
Failed to reach system.img on SD card.
Whats the problem ?
nico85 said:
it dosent work on my htc touch cruise.
Click to expand...
Click to collapse
If you read the title it says for XDA orbit 2 not touch cruise.
Have you managed to get gprs/3g working with this? I can't seem to get mobile web working on my XDA Orbit II
I dont know whart u are doing here.
But i can use myns donut and eclair totally easy without modding something.
I just have to use the right "default.txt"...
Most packages you find here habe a "default-polaris.txt" in it or you use the one form myn ... It works great for the orbit 2 too
.....
But maby i dont get what you are doing here.. some special build or something?
BUt running android on orbit 2 is net a problem at all just use right conf.
-----------------------
@moondemon
Wifi works with myns eclair and donut. There are fixes (androidupdate.tar) you have to use (nomorootfs)
could u tell me which version have u installed? 1.6?
I succeeded installing the 1.6 version. but when I was trying installing the latest version, I was stucked at the screen which requires me to long-push the dpad center button. I did it but didnt work. I've even tried every keys, still didnt work.
could u give me a hand on it?
I have tried myn's and default-polaris does not work on my xda orbit 2. Also when I do get haret to run I have had trouble actually getting android to boot due to a continual "power wakeup" message. The default-polaris results in a flashing white screen for me. This config is the only config that actually works on my orbit 2.
Hello, i am just a newbie on Android for Polaris, so plz forgive me dump postings At the moment i am a bit spacy what i have to put together to work Android on my XDA2.
android-orbit2-eclair works on my XDA2 after installing but:
phone can't do outgoing calls:
3G can`t connect,
Cam/Gallery crashes
Wifi works.
Touchscreen works and all the rest.
before i installed the recent builds of froyo and eclair
System shows 10-15 min nice boot flash, then it works, but touch screen doesn`t work.
Anyway all the developers doing a great job here!
rgds Matthias
Im not using sd haret anymore. If you try with nand flash (http://forum.xda-developers.com/showthread.php?t=636024) everything works like a charm.
But as i used haret on my Orbit2 i was good with the package myn offered in her donut(or eclair im not sure).
In the package were a default.txt and a one for polaris/Orbit. I changed the polaris one to default (renaming) and it worked.
I think it was the donut package and it worked with zimages for eclair too.
Try this package if it works its worth a attemp to look into the default txt for other builds.
But atm i would suggest to give android at flash a try. Its almost perfekt for daily use if you not to much with some special programms on winmo.
As far as i read there are problems with haret atm gernerally that programms close even if install is fine.
Seems that flashing is the solution to all my problems, but
can you try to explain what makes the difference between haret and a NAND flash install relatet to the runing system?
Unfortunaley my XDA Obit2 is the carrier of my beloved navigation software. The other Wimo apps are junk compared with android. If there is a offline solution for Car Navigation on android, i could kick Wimo into the trash bin. Also i am a Linux user as well on my PC
Camera and astro application not working
Camera and astro application not working .. please help ...
xda orbit 2
I stuck these sections of
I've tried it and it seems it works, but I have a few questions and one major problem:
1. I installed the systems without the SIM card. When I started it again with SIM card, system says that the PIN I type is wrong altough I know that it's correct. How to solve it? Maybe it is so because I'm not O2 customer?
2. Is it possible to boot Android automatically without flashing NAND?
3. Can I theoretically Install Donut or Froyo using this method simply by putting different Zimage in the folder?
4. Do I have to perform another installation in case of buying a battery of more capacity? I saw that default.txt contains information about the battery.
5. May it work well If I change default.txt to the one prepared by atools?
Thanks for advance and greetings.
Double post, sorry.
running on my pola 200 / orbit2 but very slow i think my sd slow too
cingibi said:
running on my pola 200 / orbit2 but very slow i think my sd slow too
Click to expand...
Click to collapse
Can try rom from Scoot_CyanogenMod_6.1_RLS5.5_All_Language
I modified it for haret to O2_Orbit_2 (POLA200)_panel_3
All work perfectly except CAMERA
O2_orbit_2_panel_3_HARET_based_on_Scoot_CyanogenMod_6.1_RLS5.5_All_Languaget.rar
link bellow
http://www.4shared.com/file/01Vco3iR/O2_orbit_2_panel_3_HARET_based.html
Click to expand...
Click to collapse
denis__at said:
Can try rom from Scoot_CyanogenMod_6.1_RLS5.5_All_Language
I modified it for haret to O2_Orbit_2 (POLA200)_panel_3
All work perfectly except CAMERA
O2_orbit_2_panel_3_HARET_based_on_Scoot_CyanogenMod_6.1_RLS5.5_All_Languaget.rar
link bellow
Click to expand...
Click to collapse
Doesnt work for me ive left it about 20 mins and its still just a black screen. The first 1 worked but was slow.
hello, which rom is the best for o2 xda orbit 2 pola 200?

[Q] Locked HD2 with keyboard .cab install

Hi all,
I just installed DINIK "Anastasia" Keyboard (v3) and must have somehow done something wrong, thereby killing my phone.
I copied the .cab file to my SD card, then ran the file, installed it to the SD card (without error) and restarted when requested. The .cab can be found at the following thread http://forum.xda-developers.com/showthread.php?t=670811 .
When the phone rebooted it stopped at the white screen with gree "HTC" - it now will not advance beyond this point. I have tried to de-power & restart the phone, but it will not start.
The system is:
- OS version: 5.2.21869 (21869.5.0.82)
- Manilla version: 2.5.19211619.0
- ROM version: 1.66.405.2 (76641) WWE
- Unlocked phone
Can anyone tell me how i can get the phone running again, even if it means a hard re-set back to factory settings. At the moment the phone can't be used for anything.......
Any advice or help you can offer would be greatly appreciated.
Regards,
BGM
I am concerned that the only solution is to make HR...
Thanks Petulinek,
No doubt going to cause issues when i re-install CoPilot without de-activation.
BGM
My device also died.. suspect that the keyboard does not work with recent ROM update.
br.
Pagan Viking
U can hold volume down (or volume up, I can't remember) to boot into ur bootloader screen. U may now do a factory reset from there.
Sent from my HTC Vision using XDA App
OK thanks - looks like hard-reset is the only option
try boot with sd card out before HR
Of course it's satly to see this; but like mentioned several times on the "Anastasia keyboard" thread, v3.0 isn't compatible with older builds...
There only rest you a HR to solved your problem.
Thanks for the ideas - didn't boot with the SD out either, so have done a hard-reset.
Cheers

Categories

Resources