Hi all, is it possible to aticvesync via wireless Lan - WM6 and activesync 4.5 ?
Thanks
DaveyM said:
Hi all, is it possible to aticvesync via wireless Lan - WM6 and activesync 4.5 ?
Thanks
Click to expand...
Click to collapse
No, M$ removed this ability with Windows Mobile 5 and ActiveSync 4.x.
There have been various posts about setting up a VPN connection between the PC and the PDA to get it to work but I have never seen this so I can't confirm or deny whether it does. My suspicion is that it doesn't........
Andy
any updates on it?
Is there no way we can ditch the USB cable and sync wirelessly with our computer/laptop?
not even third party software
I am sure the Bluetooth (via Serial Port) can be used to sync devices wirelessly.
I remember syncing Typhoon by bluetooth, to activesync 4.5/4.6, but not sure if it was on wm5, or wm6
Related
Does anyone know how to configure WM6 internet sharing using WIFI via USB to a laptop PC which does not have WIFI?
When I click on the internet sharing, my Qtek 9000 running WM6 always tries to do GPRS/3G connection, even if the WIFI is on and fully functional.
Is there anyway to change that?
Thank you in advance.
From what I understand is that is does exactly what you explain, it will share your device's GPRS/3G internet connection. But I dont think you can turn the Qtek into an accesspoint for laptops to connect to via WiFi or share an incomming WiFi signal.
Biffert,
Yes, you are correct. I want to turn my Qtek 9000 as a WIFI/GPRS/BlueTooth Access Point. Or simply view it as a WIFI/GPRS/BlueTooth internet access super USB dodge for my PC.
Thank you for your pointing out about current internet sharing limitation of WM6.
However, there are two issues about the WIFI can not be shared.
One is that I am often in a place where has no GPRS, only have WIFI.
The other is that there are many regular PDAs which have no GPRS, only have WIFI. When WM6 is available for those regular PDAs, many people will ask this internet sharing via WIFI question.
Thank you.
Hello,
I have done this just now and what you need to do on WM6 is just configure the gprs / 3g settings on your mobile phone and then go to start-programs-internetsharing. The jasjar should be connected via usb.
Set the pc connection to USB and select the nework connection you have previously configured from the list. hit the connect button and you are done
gluck
You could use the GPRS/3G internet sharing to connect your notebook to the internet, and share that connection (using ICS) from the notebook (set the wifi card to Ad-Hoc mode). I have never tried this though, so I'm 100% sure it will work
Thank you to all for your suggestions.
The limitation is that if there is not GPRS available, even though my Qtek is already connected to internet (WIFI), my PC is not able to access internet via USB using Qtek 9000 WM6 internet sharing.
I think that I need to describe the situation in detail.
I have a PC which can not access internet because it does not have WIFI, or BlueTooth, or GPRS. But it has a USB port.
I have a Qtek 9000 which can access internet by either WIFI, or GPRS, or BlueTooth. And my Qtek 9000 has WM6 internet sharing enabled.
What I want to do is to connect PC with Qtek 9000 via USB cable to let my PC to access internet using Qtek 9000 WM6 internet sharing.
Idealy, regardless how my Qtek 9000 is connected to internet (WIFI, GPRS, BlueTooth and etc.), my PC should be able to access internet via USB cable using Qtek 9000 WM6 internet sharing.
The current WM6 internet sharing is limited to that if Qtek 9000 is connected to GPRS internet, my PC is able to access internet via USB cable using Qtek 9000 WM6 internet sharing. If Qtek 9000 is connected to WIFI internet, WM6 internet sharing will not work.
I think this issue will be resolved sooner or later because when regular PDAs start to use WM6, many people will want to have WIFI WM6 internet sharing because regular PDAs do not have GPRS.
dchen4649 said:
Thank you to all for your suggestions.
The limitation is that if there is not GPRS available, even though my Qtek is already connected to internet (WIFI), my PC is not able to access internet via USB using Qtek 9000 WM6 internet sharing.
I think that I need to describe the situation in detail.
I have a PC which can not access internet because it does not have WIFI, or BlueTooth, or GPRS. But it has a USB port.
I have a Qtek 9000 which can access internet by either WIFI, or GPRS, or BlueTooth. And my Qtek 9000 has WM6 internet sharing enabled.
What I want to do is to connect PC with Qtek 9000 via USB cable to let my PC to access internet using Qtek 9000 WM6 internet sharing.
Idealy, regardless how my Qtek 9000 is connected to internet (WIFI, GPRS, BlueTooth and etc.), my PC should be able to access internet via USB cable using Qtek 9000 WM6 internet sharing.
The current WM6 internet sharing is limited to that if Qtek 9000 is connected to GPRS internet, my PC is able to access internet via USB cable using Qtek 9000 WM6 internet sharing. If Qtek 9000 is connected to WIFI internet, WM6 internet sharing will not work.
I think this issue will be resolved sooner or later because when regular PDAs start to use WM6, many people will want to have WIFI WM6 internet sharing because regular PDAs do not have GPRS.
Click to expand...
Click to collapse
Between PCs and regular PDAs, usually the internet connection sharing would go the other way around. Nearly all laptops these days come with a Wifi card and virtually all desktop or laptops come with Ethernet NICs. For this reason I think that perceived demand is low and this functionality was not envisioned when WM6 ICS was designed.
I think the easiest way would be to get a USB wifi adapter for your PC... You won't have to worry about battery life on the phone, etc.
Wondering how possible it is to do something slightly different. I have a UTStarcom PPC-6700 running one of the various AKU3.5s out there. The Internet Sharing feature is great, but the only options are to connect the PC via either USB or Bluetooth.
Now, what would be really slick, since the 6700 has integrated WiFi, would be to enable Internet Sharing over WiFi and effectively turn the 6700 into a WiFi access point. Anyone make any progress on this?
And... I'm new here, so please accept my apologies if I have asked something that has been already asked ad nauseum.
answerman said:
Wondering how possible it is to do something slightly different. I have a UTStarcom PPC-6700 running one of the various AKU3.5s out there. The Internet Sharing feature is great, but the only options are to connect the PC via either USB or Bluetooth.
Now, what would be really slick, since the 6700 has integrated WiFi, would be to enable Internet Sharing over WiFi and effectively turn the 6700 into a WiFi access point. Anyone make any progress on this?
And... I'm new here, so please accept my apologies if I have asked something that has been already asked ad nauseum.
Click to expand...
Click to collapse
Yes, sharing EVDO over WiFi instead of bluetooth and USB is already possible. Just click here to see how..
However, I have yet to see how to share WiFi over USB or Bluetooth... Let me know if this is posted anywhere...
can i share from uni in one time connection over wifi and bluetooth ? if yes...how do this ??
dchen4649 said:
I have a Qtek 9000 which can access internet by either WIFI, or GPRS, or BlueTooth. And my Qtek 9000 has WM6 internet sharing enabled.
What I want to do is to connect PC with Qtek 9000 via USB cable to let my PC to access internet using Qtek 9000 WM6 internet sharing.
Idealy, regardless how my Qtek 9000 is connected to internet (WIFI, GPRS, BlueTooth and etc.), my PC should be able to access internet via USB cable using Qtek 9000 WM6 internet sharing.
The current WM6 internet sharing is limited to that if Qtek 9000 is connected to GPRS internet, my PC is able to access internet via USB cable using Qtek 9000 WM6 internet sharing. If Qtek 9000 is connected to WIFI internet, WM6 internet sharing will not work.
I think this issue will be resolved sooner or later because when regular PDAs start to use WM6, many people will want to have WIFI WM6 internet sharing because regular PDAs do not have GPRS.
Click to expand...
Click to collapse
i have a very similar problem: my laptops built-in wifi-card can only handle WEP encryption, but not WPA !
so i would like to use my Neo as a "wifi-modem", connected to my laptop by usb-cable.
any news on this ?
tia
Joined the conversation a few years late! Anyway, this may be the answer to your question:
http://forum.xda-developers.com/showthread.php?t=377047
Hi to all.
In the new roms from WM 6. Have and application called "Internet sharing"
I want to use the USB cable (not bluetooth) to connect mi laptop to internet trought my universal 3G.
How i use it?
I activate the connection. Mark the USB and my 3G definition. Connect. It's connecto 3G. And in the laptop i cant navigate.
Can anybody help me?
Thanks.
You have to disable the USB connection in activesync on your PDA, as well on your laptop. Mine worked with WM05!
First, connect the PDA to the net by selecting usb connection and your default 3g connection, push connect and then connect the PDA to the laptop and it will be seen as some modem or something else.
You have to disable the USB connection in activesync on your PDA, as well on your laptop. Mine worked with WM05!
Thanks.
But dont wotk for me.
The laptop detect the connection sharing. But the laptop don't navigate on internet.
The Pda navigate Ok.
am having the same problems too. ive followed above posted instructions but no dice.
in my case, the connect button is grayed out.
think i may have to configure either VPN, or ADD MODEM CONNECTION or SETUP PROXY SERVER. either way i dont have any idea how.
ROM: black shadow 4
RADIO: 1.43
juanjillo said:
Thanks.
But dont wotk for me.
The laptop detect the connection sharing. But the laptop don't navigate on internet.
The Pda navigate Ok.
Click to expand...
Click to collapse
Have your browser on your PC set to Auto detect Proxy settings.
My IE 7.0 have the "automatically detect Settings"
Dont work.
Thanks
juanjillo said:
Hi to all.
In the new roms from WM 6. Have and application called "Internet sharing"
I want to use the USB cable (not bluetooth) to connect mi laptop to internet trought my universal 3G.
How i use it?
I activate the connection. Mark the USB and my 3G definition. Connect. It's connecto 3G. And in the laptop i cant navigate.
Can anybody help me?
Thanks.
Click to expand...
Click to collapse
Hi,
I can describe, how I am using this feature in Vista.
First I do prefer to use Bluetooth over USB. The reason: it is very often that I am in the room, were the GSM/3G signal is poor. Then I can place my Uni in the window or other place were the signal is much stronger, and connect with the Uni using Bluetooth. The transfer is more or less on the same level as on USB anyway.
Now, Internet sharing option is a new function in WM6, bit like internet sharing in desktop windows. Our PC is not using the Uni as a modem. It uses it as kind of gateway to internet, meaning it use different protocols then with modem connection.
So, after pairing my Uni with my PC in Bluetooth, I got another kind of network connection on my network connections list. It is marked as closed connection with red mark on Bluetooth icon on this list. Then I go to internet sharing in my Uni and select Bluetooth Pan option and then click “Connect”. It establishes its own connection to internet using setup, previously configured in my Uni.
Then, in my PC I go to Network connections list and just click “Bluetooth network connection” icon. This makes my PC to connect with my Uni via Bluetooth using network (TCP/IP) protocol and use it as normal internet gateway. If I click the icon once more, then I get window showing standard connection with bites transferred, buttons for options, disconnection and so on. It shows that the connection is with 1Gb/s, but this is only for connection with my Uni. The connection from Uni to Internet is , obviously much slower and depends of local conditions and 3G standard.
Hope I could help.
Edit:
If I try to do the same over USB, then there is a problem. After connecting USB cable, my PC automatically goes into AS mode and syncs with my Uni. Then If in internet sharing I select USB and click "Connect" the syncing stops, AS in Uni shuts down (this is OK), but my PC try to install a new driver for new device and it does not find it, so it can not recognize my Uni as a proper gateway to connect with over USB. If it would install a driver then on Network connections list a new connection should show up, probably named as "USB network connection".
That’s the other reason I do not use it this way.
Show second and third post. Expain how to quit USB in AS to use this feature.
I will try this trroght BT, but (for me) via Cable is better, the pda is charging all the time. Via Bluetooth the battery goes down quickly.
People need help. I flashed my cingular 8125 with crossbow reloaded rom, its great but cannot seem to understand how to use internet connection sharing to get my laptop online. under network connections i can see that my phone is connected to the internet. but my laptop refuses to browse any site. i have winxp.
raghav.kas said:
People need help. I flashed my cingular 8125 with crossbow reloaded rom, its great but cannot seem to understand how to use internet connection sharing to get my laptop online. under network connections i can see that my phone is connected to the internet. but my laptop refuses to browse any site. i have winxp.
Click to expand...
Click to collapse
Check your firewall. In this mode, you are loged to a new network with different IP than your IP from your home network, if any. Using internet sharing your computer gets IP from your PPC. In my case it is 192.168.0.xx and the gateway is 192.168.0.1. It means that if your firewall was set to accept your home network with different IP, then you have to set it to accept this new IP as well. Oherways you will not get any comunication through this chanell. Of cource, this suggestion is valid only if you have any other firewall then Windows Defender.
juanjillo said:
Show second and third post. Expain how to quit USB in AS to use this feature.
I will try this trroght BT, but (for me) via Cable is better, the pda is charging all the time. Via Bluetooth the battery goes down quickly.
Click to expand...
Click to collapse
I am using this in Vista. There is something named as Center for Windows Mobile Cervices. This is Vista version of AS. Here I do not need to quite USB and AS. Simply set Internet sharing option in your PPC for Bluetooth PAN and then click "Connect" in PPC. After that, click "Bluetooth Network Connection" in your Network Connections List in the PC. You will get the page with list of bluetooth access points. You should see your PPC device marked as the default device. Bellow you have "Connect" button. Click it and you are done.
By the way, the second and other posts describe the attempt to connect in the old way using modem connection. WM6 does not provide the modem support for PC connection. It means that officialy you can not use WM6 device as a modem like with WM5 or Symbian devices. However, HTC has released the modem driver for WinXP and Vista for new WM6 as an after market support. You can google for this on HTC pages. I never used this, cause this new way seems to me a lot easier. Also I never heard about anybody who succeeded with does drivers.
I use Windows Xp and the firewall is OFF
With the new WM6 rom of Ivan works for me
http://forum.xda-developers.com/showthread.php?t=305512
wakko said:
You have to disable the USB connection in activesync on your PDA, as well on your laptop. Mine worked with WM05!
Click to expand...
Click to collapse
Hi, just checking, my O2 WM5 rom don't come with the "Internet Sharing" program.
May I know how to get it?
My current rom version is 1.30.107
Hi,
Is there anybody to tell me what is the setting for internet connection via usb
on WM6, on WM5 it was automatic when I was connect on the PC.
Thanks for help.
on WM5 there was something called WMODEM which is missing from WM6
But now we have a better 'Internet Sharing' under programs which does the same thing but perhaps a bit better.
cheers
jean marc said:
Hi,
Is there anybody to tell me what is the setting for internet connection via usb
on WM6, on WM5 it was automatic when I was connect on the PC.
Thanks for help.
Click to expand...
Click to collapse
Hi there,
Goto, Start, Settings, Connections.
Open USB to PC.
Un-check, the advanced network functionality.
KOR!
Is there any way to run interenet sharing on the PC side over bluetooth? I have the PAN profile on PC but Raph just wont see it.
http://wiki.xda-developers.com/index.php?pagename=InternetOverBluetoothNetwork
and if it still don't work
just connect to activesync over bluetooth that give you access to the pc's network too
Rudegar said:
http://wiki.xda-developers.com/index.php?pagename=InternetOverBluetoothNetwork
and if it still don't work
just connect to activesync over bluetooth that give you access to the pc's network too
Click to expand...
Click to collapse
I do not have that kind of option in connections
When I have Advanced network available over activesync then it will occasionally disconnect activesync (the error that most of us have)
This may be obvious to some of you (I hope so) but not to me: when I have my Vox connected via USB to my PC, can it use LAN Internet access ?
It's called Active Sync...
It does, but it's not a very good connection, some programs use it, some don't. You have to check it out!
yeah, we can connect all device (i have hermes, kaiser and vox) all connected to internet through Activesync..i use 4.5 now..
Thanks guys
Does that mean that when my phone is connected to my PC via ActiveSync it will always use the LAN connection and not the dial-up connection of my telecom provider? For all programs?
yes. as long as your computer still connected to internet/wifi
Not all programs do this, so take care! Best is to check with radio disabled first.