I already enter to bootloader and connect the USB cable to PC and run MaUpgradeUt_noID.exe to downgrade but not detect any Rom file. the log file show :
14:29:16:375 [msg] : Version : [1.5.0-1.0.0.1].
14:29:16:375 [msg] : Config Info : [667685],[1],[0],[0].
14:29:16:375 [msg] : RadioFile Not Exist !
14:29:22:453 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
14:29:26:609 [msg] : Disconnect ActiveSync .... [2]
14:29:26:765 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
14:31:03:625 [err] : BL Get Device Data Error.
14:31:03:625 [msg] : Update Image. CE : [4], MSystem : [2], Radio : [0]
I tried for a long time but problem still.Quaere how to do?
Downgrade!
The way i do a down grade is by booting up the phone into the operating systems, and run MaUpgradeUt_noID whilst uder windows, it shows the rom at first and sometimes it states there is a country error, don't worry, run MaUpgradeUt_noID again and then it will not show the rom on the phone, but it shows the new one you're uploading, click upgrade and it will do it for you.
I hope this helps
I tried it,but still it . how to do? help me?
I also have a same problem to downgrade to 1.12
I been trying many time n way to do it also is same.
Just stuck with the Looking Device.
Hope someone really can help us to slove this problem.
errors with 150 and 101. No downgrade and no upgrade radio 1.12 to 1.13.
It stuck in 2.03.
I been waiting long long time also no ppl like to help us with tis problem.
Now i also dunno y i cant use my Mini liao cos been stuck at the align screen.
Really feel bad luck after upgrade tis rom.
Plz someone help me.I really need to downgrade it......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is a proof that all stuff we need are ready.
No way to pass
All I try to flash 1.13 rom from 2.03tx.
no possible to flash EVEN with imate-qtek generic wwe roms. 2.03tx rom is a great rom actually but need to downgrade.
Help?
Ooo ****. My problem is easy:
Go to device managemnet and re install the pocket PC device driver.
i need help
this problem for me yes....
Doing downgrade now.
Reset the Compact to USB-mode (power, camera, reset-button)
Run MaUpgradeUt_noID.exe
Wait for the downgrade to finish.
No problems downgrading using the official t-mobile ROM (http://www.tm-phonedownloads.com, unpack the .exe using winrar)
sariel2413 said:
Reset the Compact to USB-mode (power, camera, reset-button)
Run MaUpgradeUt_noID.exe
Wait for the downgrade to finish.
No problems downgrading using the official t-mobile ROM (http://www.tm-phonedownloads.com, unpack the .exe using winrar)
Click to expand...
Click to collapse
no errorrrrrrrrrrrrrrrrr
plz help me utility error
o2 mini
Related
When i connect the Magician and try to update i get a 201 error.
I'm sure de device is connected because i can see this in the device manager. When i try this, i'm in the bootloader without a SD card. Can somebody please help me because i used the greek update and got the 15 sec reboot thing.
Ok. I now tried the MaUpgradeUt_NoID on several Rom's but then my update info fields are emplty (see picture)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I get this when i try to update in the bootloader (USB V1.00)
I realy don't know waht i'n doing wrong.
Ta wiz.
I will just stick with installing it as is then.
Folks, all I have done is:
1. Extract the finnish rom into a folder using winrar.
2. Copied MaUpgradeUt_NoID.exe into the folder.
3. Disabled USB in ActiveSync.
4. Run MaUpgradeUt_NoID.exe
5. Reset the iMate into Bootloader using Camera+Power buttons held with soft reset.
6. Connected the iMate with USB.
On the last stretch now so I will post results.
Regards...
NeungBoy said:
Ta wiz.
I will just stick with installing it as is then.
Folks, all I have done is:
1. Extract the finnish rom into a folder using winrar.
2. Copied MaUpgradeUt_NoID.exe into the folder.
3. Disabled USB in ActiveSync.
4. Run MaUpgradeUt_NoID.exe
5. Reset the iMate into Bootloader using Camera+Power buttons held with soft reset.
6. Connected the iMate with USB.
On the last stretch now so I will post results.
Regards...
Click to expand...
Click to collapse
This is exactly the way i'm doing it but i still get the empty fields like i posted.
Try restarting the PC!
i've read that for some people it solved this problem
I still got the same problems. If i use the original MaUpgradeUt i get the "error 201: get device data error" and if i use the MaUpgradeUt_NoID i get the empty version thing. Can somebody please help me? I even tried to upgrade with the SD method but only found the spanish ROM on the xda-delveloper FTP with no results. If somebody nows where to find the ROM mda_compact_upd_en_1.zip from the nowicom.com page, could you please let me know?
I'm realy out of ideas so if somebody got any.........
is there a posibility that I killed my bootloader? if zo, can somebody please tell me if I can fix it?
error 201: get device data error
I now tried the MaUpgradeUt_NoID on several Rom's but then my update info fields are emplty (see picture)
now i cant get flash in my imate jam plese some body tell me method how i flash and where i get stuff for it
my email
[email protected]
After 2 days of messing with this and learning more about flashing ROMS than I ever wanted to it finally worked!!!
If you messed up by not SuperCID(ing) your phone before you flashed it because you didn't follow directions like me, here is a solution that i had to dig up from various forums and threads to get your phone back to WM5.
1. Downloaded the imate wm5 from here:
ftp://ftp.xda-developers.com/smartphones/Tornado/Shipped_Complete_Updates/I-mate
2. Downloaded the Typhoonnbftool...just google it. I used version .4.
3. Find out what your original CID id is by using the Ttermpro. (make sure the Allow USB Connections is unchecked in Activesync...i spent an hour trying to get ttermpro to work)
refer to this thread for more info: http://forum.xda-developers.com/showthread.php?t=319588
4. Now run the typhoonnbf tool. File > Open the .nbf file you downloaded in step 1. (imate wm5)
Tools > Edit Data Header
Change the Operator to match what your SuperCID id is (Step 3) and type in 99.99.99.99 (i'm sure any high number will work here) in the "Image Version" field as well as the "Secondary Version" in the header of the .nbf. (i'm not sure if the Secondary version is necessary, but i did it anyway to be safe)
Sample of what it should look like:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Save the file under a different name in the same directory. Move the orignal .nbf file to a safe location. Rename the edited version to nk.nbf
6. Run the ROM update utility and it should work
Good Luck and don't give up hope.
Hi All... I didnt notice and i tried to run ((Artemis_Touch_Vanilla_4.02.zip)) this ROM on HTC touch and its got stuck on HTC logo screen and says OS 3.13.0.0 .... Please help me... i have tried to restart and tried what ever possible but nothing is working it comes back to same screen...Please help ...please
the thing is it does not go the three color screen...it straight comes to the HTC logo screen and then in about 3 or 4 seconds comes OS 3.13.0.0 and then thats it its on the screen for ever....I cant click on anything its does not even restart with the power button on top...i can reset or take out the battery to shut down.....what do i do now...please help me
512k nbf
Hi
After I edit the nk.nbf file the resulting file is only 512k so the rom updater won't load it.
What do I do?
try using another version of typhoonnbftools
1. Downloaded the imate wm5 from here:
ftp://ftp.xda-developers.com/smartph...Updates/I-mate
The link doesn't seem to work for me. It poped up "error 503: permission denied".
Does anyone have the same problem. Where else can I get an imate wm5? Thanks a lot
SupremeM said:
1. Downloaded the imate wm5 from here:
ftp://ftp.xda-developers.com/smartph...Updates/I-mate
The link doesn't seem to work for me. It poped up "error 503: permission denied".
Does anyone have the same problem. Where else can I get an imate wm5? Thanks a lot
Click to expand...
Click to collapse
Use ftp://[email protected]
you should be asked for login details, use xda as user + password
then navigate the folders starting with the smartphone then Tornado links, you should be able to find it from there.
New problem
I got another version of Typhoonnbftools and successfully edited the header of the file. Flash seemed to go fine right up until reboot. It restarted and displayed o2 splash screen (which should have been overwritten by the imate rom) and continues to bootloader.
Any more suggestions anyone?
wat i still dnt understand is that wen i run tera term pro i dnt no where to type the info 2
my problem now is how to know my tornado cid pffff
Guys I need some help with bringing my omnia to live state. I tried flashing it with a ROM flashing my BOOT to 1.37 (even though I already had it pre-flashed to my phone before) and the PDA . The BOOT flashed fine, but the PDA got stuck on 37%. I disconnected my phone from the PC and restarted my omnia and when it switched on it started showing the image that is in the attach. I hope somebody will help me in finding a way out of this situation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Removing the battery, restarting PC and Hard Reset do not help. The PC refuses to detect my device
ps. I've flashed my omnia for many times, but this time something went wrong. I guess something has happened to my PC
Hy!
I had a Omnia for a long time and i think i can help you....the chance is 50/50......
You need a PC with Windows XP first...do you have it?
Yes, I do have XP.
ps mb u can tell what time aproximately u r going to be on this forum next time, so that we "meet" here and try to fix my problem
Lets do this.....
Hy!
Okay lets do this.....this Torturial helps me before because i had the same problems.....
Thanks to Littlebuger......
At first you need to do this:
1.Device off
2.Batterie out
3.Wait one minute
4.Batterie in
5.dont switch your Phone on.....
6.Charge your Batterie (Over Night)......
If you had use an Modem-Driver bevor to flash your Phone you had to Uninstall it (Better uninstall all your Flash-tools)........
Next Download this files and unzipp it to your Computer:
http://rapidshare.com/files/178220179/Samsung_Modemtreiber.rar
http://rapidshare.com/files/182053365/i900_1.6.4_XP_und_VISTA.rar
http://rapidshare.com/files/178198057/pda.rar
http://rapidshare.com/files/178199323/customer.rar
http://rapidshare.com/files/178199730/phone.rar
http://rapidshare.com/files/183897879/eboot.nb0
Ready?Old stuff Unimstalled,Charged and all Downloaded and Unzipped!
-Okay than install the new Modem-Driver from first Link to your Computer....
-Install Crand Prix
-Do not Stat your Phone!
-Connect your Phone to a USB-Port an your Mainboard,dont use the front-USB or an USB-Hub......(and maybe you should Cook a Coffee )
Okay now its getting Hot......
1.Start CrandPrix
2.Press the PDA-Button
3.Locate the "pda.bin" you Downloaded bevor
4.Remove the Chop (Deutsch:Hacken) from Phone Bootloader Update
5.Press the Detect-button
6.Start your Phone
7.Wait until Flashing (If its done the Window said "Job Done"
8.Close CrandPrix
9.Open CrandPrix
10.Switch off your Phone
11.Press the CSC-Button
12.Locate the "customer.csc" you Downloaded bevor
13.Remove the Chop (Deutsch:Hacken) from Phone Bootloader Update
14.Press the Detect-button
15.Start your Phone
16.Wait until Flashing (If its done the Window said "Job Done"
17.Close CrandPrix
18.Open GrandPrix
19.Switch off your Phone
20.Press the Phone-Button at CrandPrix
21.Locate the "Phone.bin" you Downloaded bevor
22.Remove the Chop (Deutsch:Hacken) from Phone Bootloader Update
23.Press the Detect-button
24.Start your Phone
25.Wait until Flashing (If its done the Window said "Job Done"
26.Close CrandPrix
If now all runs great and the Phone starts normaly than "Thats It".....if not than...here we go......
27.Open GrandPrix
28.Switch off your Phone
29.Press the Loader-Button
30.Locate the "eboot.nb0" you Downloaded bevor
31.If not...SET THE CHOP from Phone Bootloader Update !!!!
32.Press the Detect-button
33.Start your Phone
34.Wait until Flashing
35.If the Phone restarts and CrandPrix Said "Job Done" and the Phone is alive than THATS IT
If you can not do this torturial because you Phone can not be found than Uninstall the Modem-Driver and Download and install this Driver:http://rapidshare.com/files/178832564/ppc_usb10.rar
....and try again from Point 1 of this torturial!
So best wishes and Leave an Replay Please.......
Ps:Sorry for the English i´m from Germany.....
MFG
Don't worry about ur English. Its not my first language either I'm from Russia and I'm only 17.
I'll do that first thing tomorrow morning because now rapidshare does not have free slots, so I'll just have to wait
Okay!Great....i wish you good Luck......
It did not help/ I was told that the problem is most probably with my data cable so I'll have to look for one. I'll post as soon as I'll bring my omnia to life
Hay. This is my first post in xda and i don't speak english.
I have chuwi vi7 and windows 7 but i can't flash the tablet.
When I connect chuwi with PC appear 3 new cdc serial and 1 adb.
After installed many driver apper this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I take FlashTool_E2 from this
r_e_n_e said:
I left dummy IMEI. I used this one ROM from
Code:
https://yadi.sk/d/BFxcO0briMMyi
Flashed and WiFi works!!! So everything was wrong ROM!!!
Click to expand...
Click to collapse
and the firmware from this
stegg said:
a new firmware has been released
Code:
https://yadi.sk/d/6boIFS_-jsLkm
it should solve the random-freeze deep sleep problem
I flashed it with instructions in first post and everything was OK, i didn't loose imei :good:
Click to expand...
Click to collapse
When I start FlashTool_E2 the corner left-bottom is pink!?!?!
If I start the "usb map wizard" don't finds any connection.
If I do "start" and clik on "USB1" it give me
An EBL must be injected. None was found in the downloaded file.
For some systems there must be an injected EBL. The file specified for download does not contain an injected EBL.
Check that the file is correct for the target. This error can also occur on a normal boot time out, in which case just try again.
Click to expand...
Click to collapse
and if clik on "USB4" it give me
Error during boot
An error happened during the boot sequence.
This could be physical transmission error. Check connection and COM port and try again. If the error persists contact the developer.
Click to expand...
Click to collapse
Could someone help me please?
Sorry for my english.
Adijazz1706 said:
Tablet off, then press start usb1 before connecting phablet. after pressing, quickly connect tablet and hold vol-. If not work, try vol+ or power button. Keep trying.
Click to expand...
Click to collapse
Vary vary good. All Ok. It was vol+. Transmission ok. Upgrade ok. Imei ok.
Tanks a lot.
I have two Vi7 tablets and after firmware update they both have the same MAC address 0a:0b:ad:0d:00:d8 and cant be used on network at the same time.
Any solution to be able to change MAC address on either of the tablets ?
Hello
I think I read everything what was written on this forum about flashing Vi7 but I still have a problem. I can not find an apropriate drivers for CDC, and even Intel(R) USB flash loader doesn't work correctly.
Could you help me? Is there anybody who has a package of driveres for win7 64 bit?
The driver
Can you please give me the driver link for CDC?
on the device manager I have:
one port as "Android device" -> "android bootloader interface"
after i install the ADB installer from here http://forum.xda-developers.com/showthread.php?t=2588979
(the fastboot doesen't work for me...)
but the other 3 ports are ander the "Other Devices" and no driver...
Can you please give me the drivers for the rest. and explain?!
Thanks
I tried DC-Huawei Converter (beta) with my Mate 9 but then it cannot boot again, totally brick (no boot, no fastboot or recovery, cannot detected when normally connect to computer). It still detected when I do testpoint solution (https://forum.xda-developers.com/mate-9/help/solution-19-00-fix-hardbricked-huawei-t3750315), but DC-Phoenix cannot help, it still brick.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DC-Unlocker Support said that it cannot work if the Android version is Oreo.
Now my phone still detected with USB COM 1 driver. Does anyone how to revive it? Please help!
up up
i have the same problem
you can help me
worked for me
https://forum.xda-developers.com/mate-9/help/solution-19-00-fix-hardbricked-huawei-t3750315
But if u have a HCU licens (limited or whatever), thei wil help u, and their support is ultra fast und very good
If they don't answer, cause maybe to late today, i will try help you. Its very easy to revive ur phone with this hot **** of software , buddy
---------- Post added at 07:44 PM ---------- Previous post was at 07:37 PM ----------
gazavn said:
I tried DC-Huawei Converter (beta) with my Mate 9 but then it cannot boot again, totally brick (no boot, no fastboot or recovery, cannot detected when normally connect to computer). It still detected when I do testpoint solution (https://forum.xda-developers.com/mate-9/help/solution-19-00-fix-hardbricked-huawei-t3750315), but DC-Phoenix cannot help, it still brick.
DC-Unlocker Support said that it cannot work if the Android version is Oreo.
Now my phone still detected with USB COM 1 driver. Does anyone how to revive it? Please help!
Click to expand...
Click to collapse
I were on Oreo too.
I used unspecific Board software .... dtgk; then u need Stock firmware and the Fw with the custom Files "_hw_update", named something like that; hast to fit ur Mobile version, but u cant brick it, if u are able to use dc phoenix, so u can gice several fw's a try.
I flashed the porsche fw accidentaly, it worked, but resolution didnt matched
same problem, help me mate 9 no turn on, is dead after install gpu turbo 377
in DC
Looking for a device in upgrade mode
No devices detected in upgrade mode
Looking for a device in fastboot mode
No devices detected in fastboot mode
No device detected to update
appear HUAWEI COM10 1..0 BUT NOT RUN IN DC UNLOCKER
????
Hey i bricked my mate 9 after trying to reflash the 377 gpu update. Now after trial and error and many hours reading through the forums i have managed to get com 1.0 drivers working, and downloaded 3 files:
MHA-AL00A_HLMHAAL00AM00A063_Factory_firmware_China_Nonspecific_Android_7.0_EMUI_5.0.dgtks
MHA-L09B_C432B182_Firmware_United_Kingdom_Nonspecific_Android7.0_EMUI5.0.APP
L09B_C432B182_update_data_hw_eu.APP
Looking at the DC unlocker help page it says to put the file in firmware file in the update file location, the firmware.app in the update app file location and the data.app in the optional customisation file location. Now when i go to install the update it keep giving me the following logs please help me.
09/12/2018 18:58:17 Starting to write device in FASTBOOT mode...
File to update: MHA-AL00A_HLMHAAL00AM00A063_Factory_firmware_China_Nonspecific_Android_7.0_EMUI_5.0.dgtks
Device detected:
COM5: HUAWEI USB COM 1.0 (COM5)
Writing bootloader...
Writing MHA-AL00A_HLMHAAL00AM00A063_Factory_firmware_China_Nonspecific_Android_7.0_EMUI_5.0_3.dtwork...
Error writing Bootloader
09/12/2018 18:58:50 Writing device finished - INCOMPLETE