Related
Hello, well, after several searching ended up here... my first post (like all of us when in trouble)
When trying to enter the tri-color screen, we pressed several times power+volume down and reset button but the phone never gets there, no matter what you do and now it is stuck at the "boot" screen that says: "Touch pro" in white letters and in the right down corner, with red letters says:
R 1.02.25.19
G 52.33.25.17W
D 1.94.00.00
Now, what to do here? it doesn´t boot, no hard reset, no nothing, if i press the reset button re-powers and gets there again... help..!!!
Thanks.
Sergio.
squiros1976 said:
Hello, well, after several searching ended up here... my first post (like all of us when in trouble)
When trying to enter the tri-color screen, we pressed several times power+volume down and reset button but the phone never gets there, no matter what you do and now it is stuck at the "boot" screen that says: "Touch pro" in white letters and in the right down corner, with red letters says:
R 1.02.25.19
G 52.33.25.17W
D 1.94.00.00
Now, what to do here? it doesn´t boot, no hard reset, no nothing, if i press the reset button re-powers and gets there again... help..!!!
Thanks.
Sergio.
Click to expand...
Click to collapse
Do entering bootloader : http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners#bootloader (With the device turned off, press and hold the VOLUME DOWN and POWER buttons, then press the RESET button with the stylus)
Then flash new ROM, i hope it's helping
Already tried that...
erwinpiero said:
Do entering bootloader :
(With the device turned off, press and hold the VOLUME DOWN and POWER buttons, then press the RESET button with the stylus)
Then flash new ROM, i hope it's helping
Click to expand...
Click to collapse
That´s exactly why i ended with the phone stuck at the first time... i recently got this phone and i wanted to see the bootloader version and stuff to do a firmware update but now it´s just there all the time. Not even being recognized by the pc.
Thanks.
Had You try flash via SD Card?
erwinpiero said:
Had You try flash via SD Card?
Click to expand...
Click to collapse
Well, no, i don´t have an sd card available now... one thing i forgot to say is the phone, after it is on that screen, never turns off again unless you remove the battery... and yes, i have left it on for a day, same thing...
What is the procedure to do the sd card flash thing? it that needs to get to the tree-color screen forget it... that´s exactly what the phone doesn´t do...
Thanks.
Sergio.
Hello Sir, to flash using SD card, you can read it here http://forum.xda-developers.com/showthread.php?t=448008 see number 5.
HTC Fuze
I had the same problem. None of the hard resets worked on my phone. The screen would be stuck on my lock screen and unresponsive. It would not shut off unless the battery was taken out.
Now it's working fine, all I had to do was press the reset button and enter in the code a1b2c3.
Hope this helps.
nessab04 said:
I had the same problem. None of the hard resets worked on my phone. The screen would be stuck on my lock screen and unresponsive. It would not shut off unless the battery was taken out.
Now it's working fine, all I had to do was press the reset button and enter in the code a1b2c3.
Hope this helps.
Click to expand...
Click to collapse
Hi,
Interesting... i´m not the only one with that problem then.... code doesn´t do anything... still same screen....
...no bootloader...
erwinpiero said:
Hello Sir, to flash using SD card, you can read it here --- see number 5.
Click to expand...
Click to collapse
Hello,
Ok, well, the main problem here is that i can´t get into bootloader... the phone is stuck at the fist "Touch pro" screen and nothing else happens...
Anyone with a clue on this? is this phone bricked then...
you sure youre puttin it into bootloader correctly? these things are pretty hard to brick, and can be put through hell and back and still be able to put into bootloader. make sure the hold VOLUME DOWN + POWER, and at the same time RESET WITH THE STYLUS IN THE BOTTOM...youll want to HOLD ALL THREE untill you see the tri colour bootloader screen. keep trying mate, it should go
Finally got bootloader...
the-wrangler said:
you sure youre puttin it into bootloader correctly? these things are pretty hard to brick, and can be put through hell and back and still be able to put into bootloader. make sure the hold VOLUME DOWN + POWER, and at the same time RESET WITH THE STYLUS IN THE BOTTOM...youll want to HOLD ALL THREE untill you see the tri colour bootloader screen. keep trying mate, it should go
Click to expand...
Click to collapse
Finally, after several tries it got into bootloader... now the thing doesn't end here because for some reason when i try to upload the Raphael Hard_SPL the phone goes ok to 0% and in about a minute a communication error appears and that's it...
We are moving forward... at least.
Bootloader Info.
Tried to flash via microSD but the phone says not allow..i guess that's because the hard SPL is not installed and it has the stock... here's what the bootloader shows, i'm not being able to install olinex hardSPL...
RAPH100
SPL-1.94.0000
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
PCBID 0x80
RID 0x0
ideas?
...no way to flash it back....
so... i guess there´s no way to get this back into business... when trying to flash always reports communication error at 0%...
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Farmer Ted said:
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Click to expand...
Click to collapse
ya i just noticed the RAPH100 in his info he posted and the t7272 in the header..mines a RAPH800 and bootloader HAS to have vol + power..anyway, i remember having an issue with something similar with my old vogue..have you tried flashing the shipped stock rom back on? if not, try flashing the stock back on it and if it goes, then try the unlock afterwards. dont fret bud, someone here will get you sorted out
here, i found this as im not well versed in raph100s. its a chart with raph100 roms. im sure some must be shipped stock roms and may be worth a try. sorry i couldnt help more, like i said hopefully someone who knows your device better may be able to help
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
How about flashing official ROM via microSD card?
patrick_spd4u said:
How about flashing official ROM via microSD card?
Click to expand...
Click to collapse
Download the official rom, right click on the exe and extract it somewhere, you'll get several files, rename RUU_signed.nbh to raphimg.nbh, move it to the root of your sd card and you should be able to install it. It should contain splash screen, radio and os.
No way to flash HardSPL...
Hello, thank you for your help! in fact the volume down+reset works perfect to get into bootloader but every time i try to flash hardSPL or stock rom via USB it says "communication error" and the phone displays a 0% bar...
Windows7 is detecting it as HTC USB Sync.
Thanks..
Farmer Ted said:
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Click to expand...
Click to collapse
...will try it again...
Hi
In fact the most close to the rom i had on that cell is ruu_signed_1.90.401.1_wwe, downloaded it and will try it again later using sdcard... one thing i wonder is the SPL version which is 1.94.00.00 on my phone.
Sergio.
freakzone said:
Download the official rom, right click on the exe and extract it somewhere, you'll get several files, rename RUU_signed.nbh to raphimg.nbh, move it to the root of your sd card and you should be able to install it. It should contain splash screen, radio and os.
Click to expand...
Click to collapse
Hi all,
after installing volDeus BG tweakv 0.5 my phone died. i can't restart it and i can't perform a hard reset. i also tried the red reset button from the back - nothing. it's not even charging. i tried a different battery but didn't solve the problem. any help would be appreciated. i don't want to send it back for repair.
It happened to me after manilla, i made this factory reset and after that the phone worked fine.
Performing a factory reset using phone buttons
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using buttons on the phone.
With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
While holding the volume buttons, press the END/POWER button briefly and then release it.
When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
thanks for reply. like i said, i can't perform a hard reset because the phone is not responding. when i press the volume up, down and power button nothing happens. i don't know what to do.
Ahhhhhh.. me 2
My hd was dead during flashing and still not working but a good thing......
I bought a new HD2.
But if some one have an idea plz let me know.
Thanks in advance
l3onard said:
thanks for reply. like i said, i can't perform a hard reset because the phone is not responding. when i press the volume up, down and power button nothing happens. i don't know what to do.
Click to expand...
Click to collapse
If you're unable to perform a hard reset with the hard keys as explained above, you don't have any other choice but to send it in for repair as far as I know...sorry.
I'd suggest first taking out the battery for a couple of hours and then try again.
de Wolfe said:
I'd suggest first taking out the battery for a couple of hours and then try again.
Click to expand...
Click to collapse
i'll try this. thanks.
de Wolfe said:
I'd suggest first taking out the battery for a couple of hours and then try again.
Click to expand...
Click to collapse
l3onard said:
i'll try this. thanks.
Click to expand...
Click to collapse
Also try this;
1. Remove the battery
2. Plug the USB cable to your computer and to your HD2
3. Push and hold volume down/up
4. Insert the battery
Normally the HD2 would start when doing this.
wardh said:
Also try this;
1. Remove the battery
2. Plug the USB cable to your computer and to your HD2
3. Push and hold volume down/up
4. Insert the battery
Normally the HD2 would start when doing this.
Click to expand...
Click to collapse
thanks but it's not working. maybe because i deactivated charging when connected to PC.
with the combination volume -, reset and power i managed to enter the bootloader. anybody help me to go on pls?
l3onard said:
with the combination volume -, reset and power i managed to enter the bootloader. anybody help me to go on pls?
Click to expand...
Click to collapse
1. L3nny, for future reference, Co0kie's Home Tab v1.8.5 already has the voldeus skinning function built-in, so there's no more need for it in the future... but since you've got it now... calm down and bear with me here...
2. Voldeus' skinning does not mess with your rom image at all, and any changes can be reversed with a HardReset (i've been there and done that). A HardReset does take 3 hands and a few tries to get it for the first time. The red button on the back is only a SoftReset, same as taking the battery out, so that's not gonna work. And since you've just seen the bootloader now, your previous HardReset attempt probably didn't have the correct buttons combination, so it never worked. Try again using this combo from TBoy2000's HowTo thread: remember it's pressing volumeUP AND Down together AND Power button. you need three thumbs
tboy2000 said:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
"This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel."
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Click to expand...
Click to collapse
good luck
atlaswing said:
1. L3nny, for future reference, Co0kie's Home Tab v1.8.5 already has the voldeus skinning function built-in, so there's no more need for it in the future... but since you've got it now... calm down and bear with me here...
2. Voldeus' skinning does not mess with your rom image at all, and any changes can be reversed with a HardReset (i've been there and done that). A HardReset does take 3 hands and a few tries to get it for the first time. The red button on the back is only a SoftReset, same as taking the battery out, so that's not gonna work. And since you've just seen the bootloader now, your previous HardReset attempt probably didn't have the correct buttons combination, so it never worked. Try again using this combo from TBoy2000's HowTo thread: remember it's pressing volumeUP AND Down together AND Power button. you need three thumbs
good luck
Click to expand...
Click to collapse
hard reset is not working. i don't think i do it wrong, because it's not the first time i try this.
i copied shell32.exe and aygshell.dll from voldeus' post an dput it on my sd card. i chose some settings, chose the wallpaper and soft reset. but the phone froze at start-up. i put out the battery and from that moment, i couldn't do anything.
if i can enter the bootloader does it mean i can install HSPL and maybe a stock or custom ROM? but if something goes wrong i loose my warranty!
please help me guys, i'm lost.
1) Maby your battery charge is too low ( maby, your usb port is broken and charging is not ON)
Try to connect your HD2 to charge
Its will be better if you will go to service centre.
sorry for my bad English
l3onard said:
hard reset is not working. i don't think i do it wrong, because it's not the first time i try this.
i copied shell32.exe and aygshell.dll from voldeus' post an dput it on my sd card. i chose some settings, chose the wallpaper and soft reset. but the phone froze at start-up. i put out the battery and from that moment, i couldn't do anything.
if i can enter the bootloader does it mean i can install HSPL and maybe a stock or custom ROM? but if something goes wrong i loose my warranty!
please help me guys, i'm lost.
Click to expand...
Click to collapse
Is your machine tied to a certain provider? If it is send it back and get a new one.You obviously have a faulty machine.Easy way to bootloader,
Hold volume down.
Take off back.
Press red button.
Bootloader appears flash radio or ROM
i tried with another battery and nothing changed. so i solved this problem already.
yes, it's an orange phone. what would be better: trying to flash a new ROM (if something go wrong i loose the warranty) or send it back for repair?
l3onard said:
i tried with another battery and nothing changed. so i solved this problem already.
yes, it's an orange phone. what would be better: trying to flash a new ROM (if something go wrong i loose the warranty) or send it back for repair?
Click to expand...
Click to collapse
New phone definitely.
l3onard said:
i tried with another battery and nothing changed. so i solved this problem already.
yes, it's an orange phone. what would be better: trying to flash a new ROM (if something go wrong i loose the warranty) or send it back for repair?
Click to expand...
Click to collapse
I dont know but i think that: to flash a new ROM you must enter in bootloader.
It is better to change a device for the new
Its a critical problem. This problem can appear again even if you repair your phone.
If you have official guarantee - you must change your device ( go to your service centre )
DUDE!~!!!!~! You're already in bootloader, just flash your original orange STOCK ROM already and be done with this!!! ALSO, you MUST take out your SD card, since that maybe the problem to begin with (having your core system files at the root of your SD is not a smart idea). If that DOESN'T work, then send the damn thing back to Orange for an exchange! Your choices are really simple, why are you wasting everone's time with this!
Good luck
i just wanted your opinion about my problem beeing a beginner in WM phones. i think always is better to ask a second opinion, especially when you are a newbie. if i wasted someones time i'm sorry.
anyway, thanks for the answers. i'll send it back to orange.
I wouldn't send the phone to repair.
1. enter bootloader-mode
2. mtty task29 search forum
3. enter bootloader again
4. flash orange original rom
5. after flashing perform a hard reset
Hi, I've got a little sceary problem with my desire s.
I installed reaper v 1.2 ROM, configured it, everything was ok. But now phone is not responding. Only black screen. I tried vol up/down and power button configuration - nothing happend. I connected phone to the charger and led turned on, I tred the same configuration - nothing happend. I discconnect phone - led is still on and phone is not responding.
I downloaded latest android sdk tools, latest htc drivers, installed, connected phone to computer, run sdk tool and type adb reboot recovery - error device not found.
When I connect phone to computer it found Qualcomm CDMA Technologies MSM, I try to install soft automaticly but comp find nothing.
Wha else I can do? I don't want pull battery. I have never done it.
Help, please.
adix631 said:
Hi, I've got a little sceary problem with my desire s.
I installed reaper v 1.2 ROM, configured it, everything was ok. But now phone is not responding. Only black screen. I tried vol up/down and power button configuration - nothing happend. I connected phone to the charger and led turned on, I tred the same configuration - nothing happend. I discconnect phone - led is still on and phone is not responding.
I downloaded latest android sdk tools, latest htc drivers, installed, connected phone to computer, run sdk tool and type adb reboot recovery - error device not found.
When I connect phone to computer it found Qualcomm CDMA Technologies MSM, I try to install soft automaticly but comp find nothing.
Wha else I can do? I don't want pull battery. I have never done it.
Help, please.
Click to expand...
Click to collapse
Don't panic brother. I've been in a similar situation many times. Whatever you do... DO NOT PULL THE BATTERY till the phone is switched off!!
Just disconnect the phone from the laptop or wall socket (remove the usb cable from the phone) and leave the phone. Don't sit and stare at it, and don't try to reason it into rebooting. Also, stop pestering God...he doesn't do phones. (I think) Just relax, and go watch T.V. or something.
One out of two things may happen :
1. It may reboot on it's own. Has happened to me... Sometimes it happes in 5 mins, sometimes in 20, and sometimes, never.
2. The battery will eventually run out of charge and your phone will switch off by itself. Now remove the battery, reinsert after 2 mins and boot up into recovery. From here, you can restore your previous nandroid backup.
P.S. If you do not have a nandroid backup, just reflash the ROM after a full format ("format all partitions, except sdcard" option in recovery). Note that if you have unlocked using HTC site, this will not work until you manually flash boot.img (you can find it in the ROM (Reaper_v1.2.zip) file) from fastboot.
Let me know what happens.
Now I' still waiting, without phone touching. Led is ON (orange colour). Phone is disconected (and me too ). Battery level was 13% before this insydent.
When LED will turn off (I don't know when) I'll reinsert battery and let you know what's up.
I hope, I did't bricked it...
adix631 said:
Now I' still waiting, without phone touching. Led is ON (orange colour). Phone is disconected (and me too ). Battery level was 13% before this insydent.
When LED will turn off (I don't know when) I'll reinsert battery and let you know what's up.
I hope, I did't bricked it...
Click to expand...
Click to collapse
Don't worry. I am virtually a 100% sure you have NOT bricked it.
Just don't panic and let the phone switch off first.
BTW, you didn't say if you unlocked your bootloader with HTC Dev site or Revolutionary?
Do you have a Nandroid backup of your previous ROM ?
How new are you to all this (flashing etc)?
Is this the first custom ROM you have flashed on this device?
enigmaamit said:
Don't worry. I am virtually a 100% sure you have NOT bricked it.
Just don't panic and let the phone switch off first.
BTW, you didn't say if you unlocked your bootloader with HTC Dev site or Revolutionary?
Do you have a Nandroid backup of your previous ROM ?
How new are you to all this (flashing etc)?
Is this the first custom ROM you have flashed on this device?
Click to expand...
Click to collapse
My phone was s-off by xtc clip (I did't use revolutionary), boot loader was unlocked on HTC Dev site.
I flashed at first CMW recover, than 4EXT Touch recovery and used it.
I tried a lot of roms, virtuous, endymnion, runny. The best for the beast was CM7.1, nightly. I flashed it month ago and updated succefully. Two days ago I decided to try REAPER. I wiped cache and dalvik's, than flashed reaper v 1.1. Today I updated it to 1.2 version (the same way as always) and I had a problem with dialer, so I wiped everything. Format all ex. sd card was done and I flashed reaper 1.2. I confogured it, just I like (set a new gov reaper, freq 118 (I don't remember) low and 1074 high) and thats it. I tried laucher, sms, phone and thats all.
adix631 said:
My phone was s-off by xtc clip (I did't use revolutionary), boot loader was unlocked on HTC Dev site.
I flashed at first CMW recover, than 4EXT Touch recovery and used it.
I tried a lot of roms, virtuous, endymnion, runny. The best for the beast was CM7.1, nightly. I flashed it month ago and updated succefully. Two days ago I decided to try REAPER. I wiped cache and dalvik's, than flashed reaper v 1.1. Today I updated it to 1.2 version (the same way as always) and I had a problem with dialer, so I wiped everything. Format all ex. sd card was done and I flashed reaper 1.2. I confogured it, just I like (set a new gov reaper, freq 118 (I don't remember) low and 1074 high) and thats it. I tried laucher, sms, phone and thats all.
Click to expand...
Click to collapse
Well in that case, don't worry your phone is safe. Just wait for it to switch off. Then after booting into recovery, just restore the last working ROM backup that you have. Don't flash the Reaper 1.2 that you downloaded till you have confirmed that the md5 checksum matches the one posted by Lowveld.
Hmm. Strange.
Phone turned off - LED was off, so I pulled battery, wait 2-5 minutes (without battery) and tried to turn it on. I saw a black screen. I press vol up/down power buttons, phone vibrated 3 times (quick) and I saw a green LED. I tried turn it on (with vol down button and without it) - nothing. I waited a while then a Led turned off.
I pluged device to the charger - orange led started blinking, so I tried to on phone - nothing. I restarted it (3 buttons) - it vibrated 3 times quickly and the same story from my first post.
Phone is unplugged, orange led is on (not blinking) and no react.
Any ideas??
Can you still boot to recovery?
adix631 said:
Hmm. Strange.
Phone turned off - LED was off, so I pulled battery, wait 2-5 minutes (without battery) and tried to turn it on. I saw a black screen. I press vol up/down power buttons, phone vibrated 3 times (quick) and I saw a green LED. I tried turn it on (with vol down button and without it) - nothing. I waited a while then a Led turned off.
I pluged device to the charger - orange led started blinking, so I tried to on phone - nothing. I restarted it (3 buttons) - it vibrated 3 times quickly and the same story from my first post.
Phone is unplugged, orange led is on (not blinking) and no react.
Any ideas??
Click to expand...
Click to collapse
Well, the blinking signifies inadequate charge for a bootup. Wait till the orange LED stopsa blinking and turns on constantly... then boot into bootloader (Voulme up and Power button - don't let go of the volume button even after releasing the power button) - I don't want you to restart by using three button combo...otherwise you'll be back to the same problem, trying to boot into a broken OS... Just disconnect again and wait for it to switch off.... then reinsert battery, connect to charger, then wait for the LED blinking to stop. Have a little patience! and DON"T RESTART with three button combo. Just boot into bootloader with Voulme up + Power key.
You have to follow these instructions carefully, exactly as i have written. Report back what happens.
enigmaamit said:
Well, the blinking signifies inadequate charge for a bootup. Wait till the orange LED stopsa blinking and turns on constantly... then boot into bootloader (Voulme up and Power button - don't let go of the volume button even after releasing the power button) - I don't want you to restart by using three button combo...otherwise you'll be back to the same problem, trying to boot into a broken OS... Just disconnect again and wait for it to switch off.... then reinsert battery, connect to charger, then wait for the LED blinking to stop. Have a little patience! and DON"T RESTART with three button combo. Just boot into bootloader with Voulme up + Power key.
You have to follow these instructions carefully, exactly as i have written. Report back what happens.
Click to expand...
Click to collapse
I did it exactly like you've written. Waited till phone, switch off, connected it and charged till led stopped blinking, disconnect, and try to boot it into recovery (vol up + power). Phone wibrated 3 times (screen did't react) and the same story. Now waiting for discharging and I'll try again.
Anyway thanks for your help and interest.
What else I can do? If the phone is not responding I can send it to warranty service. Meybe they will honour it... If not...ehss very expensive play.
adix631 said:
I did it exactly like you've written. Waited till phone, switch off, connected it and charged till led stopped blinking, disconnect, and try to boot it into recovery (vol up + power). Phone wibrated 3 times (screen did't react) and the same story. Now waiting for discharging and I'll try again.
Anyway thanks for your help and interest.
What else I can do? If the phone is not responding I can send it to warranty service. Meybe they will honour it... If not...ehss very expensive play.
Click to expand...
Click to collapse
Well, it that's not workin, Wait till the phone switches off again. Then configure adb, make sure it detects your device (use the command: adb devices) and then type the following at the cmd prompt :
adb reboot recovery
This should take you to recovery.
Ok, what can I say? Youe last thread worked!! I restared device, connect to computer - it was found as usb disk. In sdk tool divece was also found, this time as my ds Just restarted a recovery. First I saw an error in 4ext recovery, but it started with orange letters. I wiped all, formated all, recover old system, restart phone. And it works! Now I flshesd last jorgens CM7 and starting to config my phone. But a heart attack was close... Thanks man
adix631 said:
Ok, what can I say? Youe last thread worked!! I restared device, connect to computer - it was found as usb disk. In sdk tool divece was also found, this time as my ds Just restarted a recovery. First I saw an error in 4ext recovery, but it started with orange letters. I wiped all, formated all, recover old system, restart phone. And it works! Now I flshesd last jorgens CM7 and starting to config my phone. But a heart attack was close... Thanks man
Click to expand...
Click to collapse
You're welcome brother! And Congratulations!!
I know what you must have gone through till you reclaimed your phone. I remember the first time i was in a situation like yours... had to figure out this discharge the phone, LED blinking etc... thing on my own..., everyone else said battery pull was my only option. But i sitll didn't do it. I had around 60% battery remaining before this happened, so you can only imagine how many sleepless hours i spent waiting for the damn battery to run dry. http://forum.xda-developers.com/showthread.php?t=1271360
The important thing is to resist the temptation of pulling battery. Everything can be salvaged if you don't do that, but once you fry your eMMC, there is nothing anyone can do without physically repairing the phone.
May I suggest you edit the topic your OP and add the word [SOLVED] to the title. This will ensure anyone in trouble can easily locate this thread out of the cacophony on xda!
Hi Guys,
Any help will be appreciated.
Today after a long time i just enabled my bluetooth ,but after enabling it Phone restarted again and again and iam not able to do anything.
Is there anyway i can make my phone in working condition.
harsh_at said:
Hi Guys,
Any help will be appreciated.
Today after a long time i just enabled my bluetooth ,but after enabling it Phone restarted again and again and iam not able to do anything.
Is there anyway i can make my phone in working condition.
Click to expand...
Click to collapse
Wipe cache and data via recovery or factory reset? OC first backup nandroid.
this problem happen to me most of the time , when ever it happens it mean ur SD has virus so scan it weekly , it sloves my problem
Thanks for your response.
But problem here is that i'm not able to enter in Recovery mode.It is not letting me do anything.
It just started each and every time.
harsh_at said:
Thanks for your response.
But problem here is that i'm not able to enter in Recovery mode.It is not letting me do anything.
It just started each and every time.
Click to expand...
Click to collapse
Can you power it down? If not try removing battery (on your own risk) for 30sec then put back in and try to get into bootloader (Power button+ Vol Down).
If you get in try recovery or flash new recovery via fastboot.
I wanted to make a clean start on my phone after flashing way too many ROM's, so I RUU'd via HBOOT using a .zip on my Ext SD card. I used Dottat's 5.0.1 file. Everything seemed to work fine. Once I got up and running and rebooted, I went back into my bootloader (vol - + power) and did a factory reset. Everything worked smoothly and I got through first boot to the setup screen. At this point I wanted to install enewman's 5.1.1 GPE ROm then upgrade to the 6.0 Marshmallow build I had just been running. I powered down the phone and went back into bootloader. I selected Recovery and pressed power button to select. Phone turned off and never rebooted. And now I can't get it to turn on at all. I've tried holding power button for a long time, power + vol up, power + vol down. I get no bump, no lights, no nothing. When I plug it in to a charger I get no charging symbol.
Is it possible that when I RUU'd I removed my TWRP recovery, then when I tried to boot into recovery it got lost? A few things that might help - I am S-OFF, and I did notice right before I tried to reboot that the phone did say it was still unlocked.
Can anybody please suggest a fix? Or do I have a fancy paperweight to gift someone with this holiday season?
Thanks in advance for your help.
bdyer said:
I wanted to make a clean start on my phone after flashing way too many ROM's, so I RUU'd via HBOOT using a .zip on my Ext SD card. I used Dottat's 5.0.1 file. Everything seemed to work fine. Once I got up and running and rebooted, I went back into my bootloader (vol - + power) and did a factory reset. Everything worked smoothly and I got through first boot to the setup screen. At this point I wanted to install enewman's 5.1.1 GPE ROm then upgrade to the 6.0 Marshmallow build I had just been running. I powered down the phone and went back into bootloader. I selected Recovery and pressed power button to select. Phone turned off and never rebooted. And now I can't get it to turn on at all. I've tried holding power button for a long time, power + vol up, power + vol down. I get no bump, no lights, no nothing. When I plug it in to a charger I get no charging symbol.
Is it possible that when I RUU'd I removed my TWRP recovery, then when I tried to boot into recovery it got lost? A few things that might help - I am S-OFF, and I did notice right before I tried to reboot that the phone did say it was still unlocked.
Can anybody please suggest a fix? Or do I have a fancy paperweight to gift someone with this holiday season?
Thanks in advance for your help.
Click to expand...
Click to collapse
An RUU unless edited will have stock recovery in it..
As to why it won't turn on - what was the battery at, could it have died? Their are some sites online to try and get your battery to charge if it dies. Try plugging into USB computer for 24h with phone off was one I read at some point. Best of luck.
andybones said:
An RUU unless edited will have stock recovery in it..
As to why it won't turn on - what was the battery at, could it have died? Their are some sites online to try and get your battery to charge if it dies. Try plugging into USB computer for 24h with phone off was one I read at some point. Best of luck.
Click to expand...
Click to collapse
Thanks @andybones, I was hoping someone like you would reply (I've been following your work since running BoneStock on my SIII - we have similar taste in stripped down OS's). There should have been plenty of juice on it, I think I was in the 60% range last time I booted. In fact, the phone was plugged into the charger when it died. Yeah, really concerning that I get nothing at all...
Anyone else have any suggestions? Thanks in advance...
bdyer said:
Thanks @andybones, I was hoping someone like you would reply (I've been following your work since running BoneStock on my SIII - we have similar taste in stripped down OS's). There should have been plenty of juice on it, I think I was in the 60% range last time I booted. In fact, the phone was plugged into the charger when it died. Yeah, really concerning that I get nothing at all...
Anyone else have any suggestions? Thanks in advance...
Click to expand...
Click to collapse
What steps have you taken thus far as to rule them out?
first check out this link and try this
also check out this link about fixing the charging logic
https://www.ifixit.com/Answers/View/219029/Device+will+not+power+on+after+battery+ran+dry
Also could call HTC, they may send you a new device, which sucks but better than nothing.
andybones said:
What steps have you taken thus far as to rule them out?
first check out this link and try this
also check out this link about fixing the charging logic
https://www.ifixit.com/Answers/View/219029/Device+will+not+power+on+after+battery+ran+dry
Also could call HTC, they may send you a new device, which sucks but better than nothing.
Click to expand...
Click to collapse
Thanks for the suggestions. I held pow and vol+ for 10 seconds, pow and vol - for ten seconds.. I held pow and vol + and vol - for two minutes. No joy. I called HTC, they were super nice and very helpful, but unfortunately none of their suggestions helped. They had me plug it into my pc to see if it registered, had me do the pow and vol +/- for two minutes. After that, they recommended I send it in for repair. Unfortunately, since my phone is out of warranty, they said I would need to pay for repair.
I filed an insurance claim, got a new one coming Friday. Gotta refresh myself on getting s-off... Thanks again for your help. If anyone else has any suggestions (or questions), wouldn't be a bad thing to repair the phone and have a spare waiting in the wings... Is there a way to change the IMEI in case I can repair the old one? :silly:
Happy Thanksgiving, all!