Database Info

Activesync Network sharing

Recently i started to use activesync to share internet connection over BT with my pc, it works fine, though i have two questions:
first one is the synchronisation wizard that pops up immediatly after my wizard connects. i've noticed that i need to close it for net link to be established. I'd like to disable it somehow, so that i don't need to get anywhere close to my PC to connect, it's quite annoying. I even tried to capture the AS window with my own software to close it, but was unable to recognize it properly. any chance to do it?
other thing is, when i use usb to sync with AS, i am able to acces lan resources with total commander. I was hoping i can do the same with BT connection, but so far i was unable to locate the proper solution for this idea... would be cool if i had it working, i used to do it over wifi, but i prefer using BT now, help anyone...
thanks in advance guys

Still nothing, i'm stuck with this problem, would be grateful for any solution

Life can be so cruel...
So just for your information guys, problem is solved. though im rather mad about it, as it happened an ugly way;]
so i;ve finally managed to create an application that captures proper Activesync windows and closes synchronisation wizard, so that my xda establishes connection without me even touching desktop pc. thats fine. i just couldn't remember where in registry to place my app so that it opens when i connect (i don't like the idea of my program just sitting in windows tray all the time), the idea is cool, it's almost finished, i go google. "activesync registry"
first result is this...
http://www.pocketpcfaq.com/applications/undocumentedactivesync.htm
you can't imagine how angry i get... ;]
anyway, there's no need for my program to exist, i just change/add one registry value, thats it...
just why couldn't i find it for over a month, and i did right after i found another way to solve it??? life sucks ;]

IM+ problems

for you IM+ users out there...i'm having a big problem getting this to run properly on my Touch. I've used it before on my MDA and Wing with no issues at all, except the ocassional disconnect. Here's the problem: when i pull up the soft keyboard to type, the screen does not format correctly (i.e., the chat box is behind the keyboard) and when I attempt to close the keyboard, part of it stays open and i'm not still not able to see the chat window. It's basically nonfunctional like this. I've tried older versions and have had the same issue. Is this a problem with non-sliding keyboard phones? any help would be appreciated as I really love this program and want to continue using it.
the only program i've found that can compete with IM+ is Palringo..but I have a problem with getting disconnected and getting the error message "you've been connecting and disconnecting." anyone know a fix for this as well?

yea i have the same problem with IM+

it touchflo breaking it i built my own rom to fix it pm me if u need it

Screen get to Bright and stop communicate

Don't know how to name my problem, so...
when I'm writing messages, sometimes screen get to bright and I cannot send, cannot phone, nothing. When I turn off Uni, and turn it on again, it ask me for a password - I don't have any password.
I tried to slow down CPU, I tried to minimize file system cach... still don't know, where's the problem. Now, I think, the amout of messages mayby the problem. So, I deleted half of them and wait, what happened.
Does anyone have similar experience?

I've realised that the problem is caused by outlook (mean sms|emails messanger). The program is named tmail.exe. When I shut this program by taskmanager, the screen get normal and other function too. Even phone (lastly i forgot to write, when I get this bug, and try to open phone, i get error message (this program does not cooperate)).
I found, that this ROM - Tomal (Ranju) 7.7 is made from Wizard ROM - maybe this is the prob.
Does someone know what's happening? And how to get it normal. I think (but have not prove it yet), that after flash it is normal. And couple of days after, all is getting worse. Only what I've installed after flash was SPB pocket plus and Tom Tom 6. No other programs.

i had the same problem in one of the earlier roms i tried....
It can be quite frustrating for sure! Try other roms and see what works, I couldnt find what the problem was and i just moved on to another rom!
San

I tried also TOMAL 8.2 rom. And the problem doesn't dissappear.
Maybe it's collision between SPB pocket plus and WK task manager. So I turn off Wk task manager (which is preinstalled with TML rom) and see what happend.

So... noone has suggestions?

i have seen this in every rom i used. somewhere here somebody even posted photos of his uni while this happened. probably reason for this is a some low-level os bug which lead to this thing, maybe overflow of some cache because for me this happened only when i was typing a lot, no matter which program i used, the result was the same. the only solution i found is to soft-reset your device every hour even if everything seems to be ok at that moment.

USB to PC connection missing and Wifi problems

I have searched extensively and can't find answers that work for me.
I have tried several of the latest 6.5.1 and 6.5.3 roms on my Wing (which is HardSPL'd) and almost all of them have the same issues:
1) My USB to PC icon is gone in Settings\Connections. Did MS move it somewhere else? I'm having Activesync issues and think this is why, but can't change the "advanced network setting."
2) Wifi... I tap on it to turn it on or off, and more than half the time, nothing happens. It'll either stay on, or stay off. Ideas?
I had some of the same issues with some older 6.5 roms as well. Do I need to update/downgrade some of the individual device drivers or something? I'm at a loss.
Thanks, and sorry if this repeats anyone else's posts.

I am also having similar issues. I HardSPLed my wing and after I did that successfully I decided to update my wing with SIMPLY EVERYTHING 6.5.1 BUILD 23616 so I flashed it on my wing. It's installed fine and is working but now my wing doesn't connect via active sync to my PC (same PC i used to HardSPL my wing and flash this build). The USB cable is connected firmly as it does charge my phone, just fails to connect the phone with the PC via active sync.
I would really appreciate if someone can either provide a fix for this issue on this thread or tell us a way to somehow flash the device with another ROM (from storage card somehow).
Thanks in advance.

Sort of solved...
This is the one I found that works best on my Wing:
Search forums for "Illconcepts Current Projects" (won't let me post a link)
(the 28014 Titanium at the top of the page)
It is flashed from SD card like most are now (nice!).
Occasionally (usually after soft reset) the first time I try to turn on wifi it will fail to start the wifi, but it works after that until next soft reset. Have had no connection issues with ActiveSync.
Big plus of this rom is that it's fast, is lean and leaves lots of program space. I added Office and such, but on the SD card, so I can still run Skyfire (just about every other rom I tried didn't have enough program memory free to consistently run Skyfire after I installed all my standard programs).
Only down side I see (if this is one?) is that it has old PIE, not newer version, and PIE doesn't work properly at all. Only problem this has caused me is making it difficult to download/install java apps easily, as Opera Mini always seems to give me "invoke errors" when I try to download files, and since Skyfire only seems to be detected as a "full" browser, it won't pull up mobile versions of most sites, thus won't get access to the java app links, etc. Would be nice to hear of a solution for this (preferably how to fix Opera Mini's "Opera Invoke Error")

i guess this wil help u all coz it worked for me
rprakash said:
I am also having similar issues. I HardSPLed my wing and after I did that successfully I decided to update my wing with SIMPLY EVERYTHING 6.5.1 BUILD 23616 so I flashed it on my wing. It's installed fine and is working but now my wing doesn't connect via active sync to my PC (same PC i used to HardSPL my wing and flash this build). The USB cable is connected firmly as it does charge my phone, just fails to connect the phone with the PC via active sync.
I would really appreciate if someone can either provide a fix for this issue on this thread or tell us a way to somehow flash the device with another ROM (from storage card somehow).
Thanks in advance.
Click to expand...
Click to collapse
all you guys just need to open network cards under connections in settings. just tap the Sdio wlan wirelss adapter and then select name servers and copy the dns and alt dns as the same as in your desktops. Select ok and restart your phone..
it should work just fine...
all the best..

uh...no...
Doesn't have anything to do with DNS settings. DNS settings doesn't affect whether or not the wifi card turns ON or OFF. It affects connections. This is different, dude.

ActiveSync/WMDC, Xperia X1, Windows 7 Ultimate -> No connection.

Hello people.
I recently reinstalled my Win7 and I wanted to connect it with my X1, but when I plugged the phone in for the first time, Windows started downloading some weird drivers (RNDIS?) instead just opening the device control panel thing. Now I'm pretty much stuck and can't connect my phone to my PC (I get the connection error sound every time), except for the disk mode.
I've serched for some answers here on xda as well as on the internet and all the fixes I found either don't work, are already applied or open up new problems for me.
Here's what I've tried already:
Rebooting PC countless times
Turning off the advanced network settings in usb to pc menu on X1,
Reinstalling WMDC countless times
Downloading some weird WMDC updates from microsoft download center
Configuring the registry (Enum key) - getting access denied error to everything I'm trying to do there
Opening the device manager in Windows - It's just blank.
About the software and ROM status, my X1 was just HR'd and I've installed just some basic stuff like the performance pack (Advanced Config + SKTools), MortScript and S2P.
I know that the problem here is rather related to PC, but I hope you guys still can help me, as I'm running out of ideas (and sanity).
Sorry for my english (not my native language), and please do help me if you can.

Same problem here.
So far I've been able to troubleshoot it a little.
First off RNDIS is the regular WinMo driver. So nothing weird there.
Secondly WMDC does work when you run the app as an administrator (on my end anyways). That is in no way a solution though... just a workaround.
I now need to pinpoint the part that needs the actual admin rights.
I'm going to keep on trying to find the answer and I hope more people will help.

Thanks for replying for my post.
Launching WMDC isn't the problem for me though. It starts up fine, it just doesn't connect with the phone.
Keeping fingers crossed for a solution, and thanks again.

I managed to get it started too now.
Again, as an administrator it runs all fine and dandy, but no sigar as a user.
So after I get it started no connection whatsoever. Still looking...

Got it!
Installed the drivers through SCCM at system deployment. Then WMDC installs perfectly.
It still wouldn't run though. And this was because of a policy which was enabled: WPD Device: deny read/write access
Enabling write access solved my problem.

hi henk!
I had the same problem.
I changed the policy, then win7 installed drivers for the xperia, it recognizes the phone, I'm able to navigate into the memory card...
But the wmdc don't see my xperia is connected, and if I try to transfer some music from win7 to my xperia, it's very slow(1b/s)!
Have you got any idea?
Had you the same slow speed?