Related
Please, I need this urgently. My XDA2 is stuckin bootloader mode and all attempts to flash it with any updates gives me Error 100 - Device ID . I need to try flash it by SD card with existing functional ROM and see wha happenes. Please!
this old topic, describes how to grab ROM file from working XDA2
Put it on my FTP please, ID64.serveftp.com akira/akira
TIA
hi ID64,
do you still need it?
buzz
im trying to update to the tmobile-uk_wwe_ROM_1.12.00
but when i try and copy it to SD Card all i get is Parameter is Wrong
i downloaded the update from here
and i have even tried editing it by copying the orignal 416 bytes
Please Help
P.S if i install the Bigstorage WWE_1.12.00
will that update it to
tmobile-uk_wwe_ROM_1.12.00
Thnaks
ok, i have now got past that part, but i can not install the new Update, cause the files are different
on the new update the 416 bit that you copy over is no where near the same as on the Original.nb1 file
so it will not flash, just sits there saying Serial or USB in Bootloader
I noticed this also, and gave up on this rom. I think we need a clean dump as like you say the first 416 bytes don't look like thr real article.
Paul
Does anyone have a Clean Dump for the
MDA Compact - T-mobile - UK - Update
Please
Please
Please
Same problem her
Hello there,
I'm having the same problem?
rom 1.01.00 wwe
radio 1.00.10
I'm allready trying to update for about 3 month's still no luck.
Would you be so kind to set me up if you know something.
Thnx!
Hello,
Try to flash you magician with the rom for the SPVM500 it worked for me.
If you don't want to have the setting from Orange, just reboot after it says "tap the sreen to compleet".
Good luck.
Still no luck!
Hi There,
Thnx! for your help but when I load the upgrade it gives me a country id error? again.
With regards,
Use MAupdate_Noid.exe it´s in the upload directory.
Still nothing.
HI there thanks again!
If I run this app it saya the needed dll is missing, RUU.DLL
Thnx
Did you extract all the file from the execute file, you will have about eight files. Copie the MAupdate_Noid.exe in the same folder and run it. If this wount work, run it from bootloader mode, hold the camera button and the power button and reset the divice at the same time. Your screen will shows Serial or connected to USB, USB. Run the file again.
Error 150
Hi there,
I'm getting a error 150 device unknown?
Regards,
colderon said:
Hello,
Try to flash you magician with the rom for the SPVM500 it worked for me.
If you don't want to have the setting from Orange, just reboot after it says "tap the sreen to compleet".
Good luck.
Click to expand...
Click to collapse
Hi,
Is SPVM500 Rom Version 1.01?(t-mobile)
If so would you provide it for me by adding to website ftp.xda-developers.com or give me a link to download it?
Made a huge error.....didnt go through forums and read instructions before trying to Flash a German T-Mobile MDA Compact to a English ROM....
The device is completely dead....
Followed all the steps required to get it back up...It is refusing to do so though....
Used this thread:
http://forum.xda-developers.com/viewtopic.php?t=19500
One thing to note is that I am not using the AC charger, am using the USB cable to charge the phone.
Can someone please helpme...
Haven't got past the bootloader mode...
If you followed the instructions from the other thread, it should have started flashing.
Some things to check on:
1) Did you do a full d2s before you attempted the upgrade? It's always good to have something to fall back on.
2) If you can get to a bootloader screen, all is definitely not lost.
3) Sometimes, it takes 4 or 5 minutes for the "Press to flash" comes up on the screen so be patient with that.
4) Make sure you did exactly a 416 byte copy from the original rom file in to the new flash file.
5) You can only write an nb1 file from the pc AFTER it has been created from the pocket pc. If the SD card has been pc formatted, the nb1 file will write to it but the pocket pc won't recognize it and will just sit there at the bootloader screen.
HTH
I think I fired the MDA
Well I did not create the nbf file from the ppc, downloaded it from the the forum FTP. I do not have the backup of the nbf file. As I mentioned I did not read the forums before trying the update.
I just downloaded the T-Mobile ROM update and tried installing it. Obivousioly it didn't work, Game the dreaded the 112 error in the 3rd step.
Am not even getting the bootlader screen now..
Any ideas on how I can get this device up and running.?...
ok, need some clarification here. "What" are you trying to load (nbf files or nb1 files) and how are you trying to load them (SD flash or the standard USB based upgrade)?
Easy enough to check to see if your device can still get to bootload mode....hold the camera and power switches in at the same time and hit soft reset with your stylus. After letting go of those and you see either "Serial" or "USB" at the top of the screen, you should still be able to recover from this.
Tried with the nb1 files not nbf (sorry abt teh error)..
The bootloader screen was showing up ...unitll I tried the T-Mobile MDAcompact_vers11201
After the 112 error while updating...the device now refusing to get to the bootloader mode.
Have I fried the device and made it unusable....?
hey just got back the bootloader screen...
Take the SD card out, disconnect the USB and tell me what happens when you hold the power and camera buttons in at the same time, then hit the soft reset.
Also, has the unit been charged recently?
Its showing Serial v1.00...after the reset.
Its been on the USB chatge all along.....
Great. If you get Serial at the top, this can be recovered.
If you want a good T-Mobile 1.12 rom file, go here and use this one:
ftp://ftp.xda-developers.com/Uploads/Magician/tmobile-uk_wwe_ROM_1.12.00(thereapermanl).rar
Unpack it and follow all the procedures about copying the 416 bytes, rewriting the file, etc. from the other thread. I have tested this rom file and it installs ok.
Thanks for the encouraging words...
Will it work even if I do not have a backup of the original ROM on my machine?....I only have the tmobile.nb1 file which I got from the XDA forums.
Lemme try using that and editing it.
Thanks a ton for your help.
You might be a little stuck for an nb1 flash if you don't have an original flash back up but don't fear. You can go here and get this WWE1.12 file and just do a USB type upgrade:
ftp://ftp.xda-developers.com/Magician/Shipped_ROMS/WWE_11200_128_11210_ship.exe
I know this one works too. It's ROM 1.12, Radio 1.12 and Ext_ROM 1.12. When you try to run the upgrade program though, it might give you a Country ID error. If so, use the attached upgrade program instead. If this one gives you a Country ID error again, close the program and just run it again. I've been down all these roads already.
Lemme get this right this time: I will be doing the following
1. Install the ROM as you have mentioned. With the country id hack if necessary
2. Hopefully by now the device would be alive. If so will take a backup of the ROM on the SD card
3. From then on follow the instruction given in the doc.
Hope I get it righ this time else Its going to be a long night for me.
Lemme know if I have to do anything else.
Either ROM will work fine for you. It just depends on whether or not you want I-Mate stuff on it or T-Mobile stuff on it.
Doing the USB upgrade will put the I-Mate ROM on but after that, it should be working and you can then do an SD backup, follow the SD flashing procedures and get the T-Mobile ROM on.
Good Luck!
The masupgrateut is throwing up a ruu.dll error?...you seen that one before?
What sort of error? Not found?
yup...
I extracted the ROM exe and found teh file...copied it to the windows folder..and ran the no id program...no error this time round but the update is still giving a COuntry ID error...
Been looking at various posts...specially this one...
http://forum.xda-developers.com/viewtopic.php?t=14973
Thinks thats gonna help?
ok...two things.....just run it again. The no ID program sometimes does that on the first time 'round so just run it again.
Second, stick this at the end of the RUU.conf file:
[CHECKCEID_TYPE]=1
ran the program multiple times...still getting the COuntry ID error...
Are you running this program? MaUpgradeUt_noID.exe
...with the change in the RUU.conf file?
I just noticed something....did you extract all the files to a single directory and just run it from there or did you just pull a few out?
ALL the files have to be in the same directory. This is also where you need to execute the installer program.
I was trying to flash the following ROM to my Magician, I did nothing and there was a sudden Reboot in my computer.
ftp://xda:[email protected]/Magician/Shipped_ROMS/CHT_11106_902_11100.zip
NOW, I don't have any backup .nb1 roms to flash back to my magician. I only have couple of .nbf files extracted from "CHT_11106_902_11100.zip
". AND I got a "cht10606_bigstorage.nb1" - "not sure if it's a complete rom.
The ROMUpgradeUt.exe was able to reach stage 3 of the flashing. If I start the magician now, I can see it stuck at the splash screen; that's it.
I WONDER if there is any extisting rom that I can ntrw.exe back and restore to the state I can apply ROMUpgradeUt.exe.
THANKS ALL
MARTIN :shock: :shock:
One more question
I first attempted to hack bigstorage by directly ntrw-write the cht10606_bigstorage.nb1 to my 1GB SD (I don't have small SD card).
But I can't get the "Serial V1.00" in the bootloader mode switch to "SD downloading", even I waited for more than hour an hour.
P.S. I can't verify if I successfully ntrw-write the .nb1 file, coz I see nothing inside my SD.
thanks everyone.
MARTIN
Not sure if big / Small discovery
I solved my own problem, after spending hours and hours on the bootloader screen with that "SD Download" Sections = 1 Not Allow Update screen :twisted:
I realized that Using a different bigstorage verison Rom from the original Version Rom to hack/flash into BigStorage CREATES the "Not Allow Update" screen.
It seems to be a limitation for flashing rom by bootloader, in which the flashing-rom has to be the same version the rom within the magician.
So, I THINK, it's not recommanded to flash ANY modified-bigstorage-rom to an existing rom, if u r sure about the verion difference. I think it's better to use Hex editor to do the hack.
Hope this post help many with the same problem.
MARTIN
When you're stuck in bootloader mode, MaUpgradeUt_noID.exe will help you. It's modified original which won't ask about language etc. and most importantly it can be run even in bootloader mode so you can flash it anyway.
This is an alternative method for SuperCID the Tornado smartphone
Firs of all you need to download the uitils:
http://rapidshare.com/files/132988194/Unlock_SuperCID_Your_SPV_C500_550_600.rar.html
STEPS:
1.Extract files.
2.Now establish a connection between the phone and ActiveSync.
3.From the Decertificare folder copy the file Allow_decert.cab to the root directory of the phone.
4.Install Allow_decert.cab into the phone and reboot it.
5.Establish the connection between phone and ActiveSync then, from the same folder run Semi_decert.exe press Remove Lock button, if the phone was unlocked successfully a message box will appear and ask you to reboot again.
6.Establish the connection between phone and ActiveSync again, then from the Decertificare folder copy the file Full_Decert.cab to the root directory of the phone(Do not install it,just copy it).
7.Finally from the main folder run Lokiwis.bat you will see a msdos window with 4 options:
U-Unlock
L-Lock
C-CID Unlock(SuperCID)
Q-Quit
Select option C and press enter, after this the phone will reboot an your phone will be SuperCID.
To be more sure that your phone is SuperCID and using TeraTermPro util follow next steps:
1.Disable usb connection of the ActiveSync(Uncheck allow usb connections).
2.Unplug usb cable.
3.Turn your phone off.
4.Press the camera button and plug the usb cable(You'll see thw white screen and seconds later the three color screen.
5.Run TeraTermPro.
6.Select Serial and in port: USB then ok
7.Type: info 2
and if in the end of the list you see supercid htc or something like that it's done!!
Close TeraTermPro and just run any ROM you want and voilaa!!
I recomend you to perform a format BINFS before install any ROM
Hope this be useful for you all.
See ya from Mexico!
Hey thanks!
You're welcome! and I hope you'd got SuperCID your phone!!!
Great!!!!
Finally!! all these days without a solution to unlock these phones, then you came my friend and made my day.
Best regards from Colombia
Luis M
Data Crashes.
Followed the procedure precisely and at the end I got:
"Data crashes. Please contact your service provider."
I ran the TeraTerm to check what is the status of info 2:
GetDeviceInfo=0x00000002
GetDeviceCID: Error - InitDecoder
HTCS ´í•6HTCE
Right now I have device with bad CID block. I keep the original backup from lokiwiz, but I don't know how to write it back.
There is a thread for Wizard started and it looks like there is hope, just I need a tool to write the CID backup block back to the device.
Thanks.
SuperCID unsuccessful, Please help!
First SPVServices cannot connect to the remote site.
Then, I tried the alternative using Unlock_SuperCID_Your_SPV_C500_550_600.rar. Followed every step exactly. When I run Lokiwiz.bat, here is the output from the MSDOS window:
....
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
ERROR: Unable to open WinCE file '\windows' - Returned by WSARecv or WSARecvFrom
to indicate the remote party has initiated a graceful shutdown sequence.
opening: lock_backup.bin: No such file or directory
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
PLease, please help! Thank you so much!!!
/dan
TeraTermPro
Hi Bro, you now where i can find TeraTermPro???
if you can upload shotware, it´s better, thank you bro
Thanks !!
Brother thank you very much
to day i can unlock my first SPV C600 with your help
if you need anything from me, it´s done.
msn/email: [email protected]
pdt. afther you have SuperCid, and your phone reboot
run again lokiwis.bat and write U and Press Enter
afther you phone reboot, insert a simcard from
your company and enjoy it
download here teratermpro
unlockboxthis said:
Hi Bro, you now where i can find TeraTermPro???
if you can upload shotware, it´s better, thank you bro
Click to expand...
Click to collapse
Hey sorry for the delay but I've been kind of busy, TeraTermPro can be downloaded from here:
http://rapidshare.com/files/134350178/TeraTermPro.zip.html
hey I saw your post, sorry for the delay mhhh does your phone compatible?? I mean I tested with SDA (US) Tornado and I got success, I think you should try once again but now place files in different root.
to anewbie
anewbie said:
First SPVServices cannot connect to the remote site.
Then, I tried the alternative using Unlock_SuperCID_Your_SPV_C500_550_600.rar. Followed every step exactly. When I run Lokiwiz.bat, here is the output from the MSDOS window:
....
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
ERROR: Unable to open WinCE file '\windows' - Returned by WSARecv or WSARecvFrom
to indicate the remote party has initiated a graceful shutdown sequence.
opening: lock_backup.bin: No such file or directory
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
PLease, please help! Thank you so much!!!
/dan
Click to expand...
Click to collapse
hey I saw your post, sorry for the delay mhhh does your phone compatible?? I mean I tested with SDA (US) Tornado and I got success, I think you should try once again but now place files in different root.
Maybe
d1saster said:
Followed the procedure precisely and at the end I got:
"Data crashes. Please contact your service provider."
I ran the TeraTerm to check what is the status of info 2:
GetDeviceInfo=0x00000002
GetDeviceCID: Error - InitDecoder
HTCS ´í•6HTCE
Right now I have device with bad CID block. I keep the original backup from lokiwiz, but I don't know how to write it back.
There is a thread for Wizard started and it looks like there is hope, just I need a tool to write the CID backup block back to the device.
Thanks.
Click to expand...
Click to collapse
Hey bro why you dont try once again without the simcard??? or first with lokiwis try to unlock the phone and then try again, that may fix the problem
i also followed all the steps and when it reboots finally i get a message saying "data crashes contact oraanges services"
pls help
I vote for sticky!
Hi I have looked all over here and can't work out how to perform the format on the BINFS can someone help me here?
Please help
This tool broke my SP5m.
On startup im receiving a ''Data crash'' error that says ''go to service center''
I cant open my phone.
I reflashed offical i-mate_SP5m_WWE_2.6.331.2.exe rom and it comes again.
Please help.
tera term is showing this when i type ''info 2''
Code:
info 2
GetDeviceInfo=0x00000002
GetDeviceCID: Error - InitDecoder
HTCS ´í•6HTCE
Cmd>
How can i fix that ???
chaqueun said:
Hey bro why you dont try once again without the simcard??? or first with lokiwis try to unlock the phone and then try again, that may fix the problem
Click to expand...
Click to collapse
it dont works man.My phone is unusable with simcard now
Please help?
I tried unlock,cidunlock,lock but there is no difference ((
Hey bro why you dont try once again without the simcard??? or first with lokiwis try to unlock the phone and then try again, that may fix the problem
Click to expand...
Click to collapse
I tried few more times with and without a SIM card, no luck. If somebody doesn't know the lockwiz is designed for HTC Wizard, not for Tornado. Somebody said that ONLY CID unlock would work, but apparently not for all Tornados.
GetDeviceCID: Error - InitDecoder
HTCS ´í•6HTCE
Click to expand...
Click to collapse
Congrats, now you have basic PDA without Phone function. Remove the SIM card and you can use the device at least to back up all your contacts. The problem now is that you have bad COD block, which has the Certificate and the Radio information on it. I had backup of the CID block and tried to reflash it back to the device but the problem was still there. So I went to imei-check.co.uk, paid $40 and they fixed it with the provided software tool and unlock key file. It seems that Tornado has lack of developers, who can provide sophisticated tool which can backup and restore all memory blocks without the end user knowing the hex address of the particular memory block.
Successfully unlocked, thanks
(Qtek 8310)
This is a risky method for many tornados.Please use only spvservices.Dont use this wizard tool.And it can crash wizard too.
it can remove some keys from your sim block or write wrong keys and your phone gives data crashes error when your sim card is in.So you cant use your simcart.
Only the solution for tornado is buying a full unlock flash file that created specially for your imei.I bought it and my phone is working now
On wizard (not tornado) there is a project to rebuild keys without buying imi-check.com sim flash file:
http://forum.xda-developers.com/showthread.php?t=307558