I thought a tomtom taster appeared in the htc wwe rom?
If I am not mistaken it was not part of the rom but on a seperate cd disk that was supplied with certain HTC phones and installed seperately.
Its not in the ROM. Its a separate executable installed via activesync.
Related
Hey All,
I just installed those updated drivers on my wizzard with mfrazzz's Crossbow Reloaded 1.5 rom. After a reboot I can't start bluetooth anymore. Are there some regkeys I have to change to get this working? I can uninstall the package to see if it will work again with the bluetooth drivers in the Crossbow Reloaded 1.5 rom, but that'll be the easiest way.
Hopefully anyone can help me.
Thanks in advance.
The CAB file in question
Considering that cab file is from the Hermes/ WM6 Black ROM, it's probably NOT going to work on a Wizard.
Based on looking at the cab, it replaces 4 .dll files. My guess is that those are not compatible with the Wizard drivers. Just do a remove program and see if that fixes it. If not, then delete these four in \Windows and you should go back to the ones that were built into the rom:
serial_btur.dll
OEM_Misc.dll
btagext.dll
bthuart.dll
mfrazzz, do you maybe have a cab file for the bt drivers in your rom?
Hmmz, your tip worked. Thanks. I simply renamed those files to *.org and that did the trick. But maybe a question though, aren't there newer BT drivers for our wizzard?
You are a total @#$%$#@. What would make you think they were even for the wizard? And those bt drivers never even helped the the problem that black was having on the hermes. You need to do some more reading buddy. Lets not end up with bricks here
I am using the Helmi Cooked Rom and I installed the BBConnect onto my Tilt and the PC desktop software and I can't seem to generate a Pin on my Tilt because it cannot get connected. Any one able to help? (I have the BB plan)
yep
Yes am running the helmi rom myself and all is working well. Check which version of the BB client you have installed, perhaps that is a possible reason.
But works well with the vario III model and said rom installed...
I'm using the newest version 41.0.0.84 posted on HTC site. What version is yours? Did you flash a Hard SPL? or a SSPL? before flashing to the Helmi Cooked Rom?
paulesport said:
I am using the Helmi Cooked Rom and I installed the BBConnect onto my Tilt and the PC desktop software and I can't seem to generate a Pin on my Tilt because it cannot get connected. Any one able to help? (I have the BB plan)
Click to expand...
Click to collapse
Change the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU
and it should be fine.
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
paulesport said:
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
Click to expand...
Click to collapse
I too am interested in a solution...
paulesport said:
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
Click to expand...
Click to collapse
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
w01f said:
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
Click to expand...
Click to collapse
Followed these instructions after a hard reset and still no luck. I have the same problem as the others, after step 5 it would connect for a second or so, and then disconnect. So it was back to the HTC Rom.
Sometimes the rom needs to be Hex edited to show that its AKU 4.2 I am sure if you ask Hemli he might do this for you in a future release. I am sorry to say but this is one of those issues that some have beening that the roms we have on this forum have not been made for public release since the 3rd party software has not been properly set up to run with it.
tytn II
Hi all orange uk are releasing tytn II with BB connect version 91
get it here but if you want to use internet explorer you need to edit the registry to disable the proxy for autho connect
if you ahve a look atthe following post it wxplains all
steven
http://sems.org/content/download/bbc4/BBConnect_WM6_Professional_BB_4.0.0.91.cab
also
http://www.sems.org/entry.asp?ENTRY_ID=248
steven
i also found that you have to register the sim card number and imei number in the network i is bb way of protecting licence
i got an upgrade but did not register new sim just used old sim would not work but still worked on old phone eventually spoke to level two in orange and they registered new sim it worked
it is bb s way of proyecting licence
steven
any problems let me know
w01f said:
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
Click to expand...
Click to collapse
I can confirm that these instructions do work with Duttys hybrid no.3 ROM. The only difference is that I installed BBC V4.0.91 version mentioned in this thread.
By the way thank you KarmaNP it did work. I went back to check on what I entered and had too many periods (.)'s when changing the AKU. Make sure that 0.4.2 shows and not .0.4.2 which was my mistake.
Hi all,
I have recently bought a Kaiser from Orange in The Netherlands. The phone had a Dutch OS installed and since I am Dutch illiterate, I HardSPLed my device and loaded the Kaiser release ROM that I found in this thread: http://forum.xda-developers.com/showthread.php?t=331900
The problem is that, when I tried to install TT6 found here: http://rapidshare.com/files/56585274/6_032_8351.rar (the link was found in the Kaiser Wiki), I get this error message:
"Unable to install Application. Please update your device ROM to the required version before trying again"
Needless to say I am completely lost...
Please advise, and if possible, point me to a newer English ROM that might solve this problem.
Thanks in advance....
That cab you have, is the tomtom installation cab that is shiped with certain htc phones. On other devices/roms it doesn't run, because the cab checks if the appropriate rom is loaded.
Try find another CAB. There are some cabs where the check is removed.
You can also extract the cab with WinCE CAB Manager and copy the files manually to your device.
Thanks Krypt!
It worked.
Cheers
Now, I have ROM named c_shekhar WM3.18.931aCS WWE ROM, before that it was ROM Bepe 0.67.
And after update I have problem with runnig of iGO 2006 or other name OnCourse. Programm ever not tried to start. I tap on exe file and noting. Reinstall not given anything.
Somebody has same problem? How it can be resolve?
Try the last version of IGO.
rspillo said:
Try the last version of IGO.
Click to expand...
Click to collapse
IGO 8.0 not work too. IGO 8.3.2 work, but I don't like it version.
Conflict`
there seems to be a conflict between the HTC Home item and iGO2006 - once you have disabled the HTC Home item, iGO2006 will run as if nothing had happened -
(it's always better using the older reliable version rather than installing an updated fat and resources hungry version, I reckon..)
use this igo .exe file, overwrite after install the existing igo.exe in pda
should run then...
hello i have a samsung gt-c6625 and i was planing to use igo on it but i have a probleme..i copy igo on my storage card and when i wana run the .exe from my phone nothing happens actualy i can`t see any exe in my phone! why?
I downloaded .net framework 3.5 to my htc touch so I can run the advanced configuration .exe that I found on touchxperience. When I tried to install the .net framework 3.5 the error msg said it was not a pocket pc application. I used the activesync through my pc, the .net framework 3.5 downloaded to my pc and the htc touch, it just wouldn't let me install. also, the advanced configuration error msg states that the htc touchs' .net 2.0 is not sufficient to install the utility.
Run the exe from your desktop pc not through your device
as corpse said already you have to run the exe from your computer.
Setup exe are run from the computer and your computer copies a cab file to your ppc (through activesync) and installs it on your ppc.
netcf runtimes
do u guys have a ready .cab file of netcf runtime. i cant use activesync on my vista pc and i cant use also the built in activesync of vista. it only sync using media player. it was not detected when i install the software
Please install first WINDOWS MOBILE DEVICE CENTER - that is the VISTA VERSION of ACTIVE SYNC.
Afterwards download the .NET COMPACT FRAMEWORK 3.5 REDISTRIBUTABLE from this link - READ THE INSTRUCTIONS in the OVERVIEW SECTION on that page carefully !!!
You can download the cab for net cf 3.5 here
http://www.programmersparadise.org/PPM/program/DownloadProgram.aspx?id=16
I lost the ability to go online after updating to 3.5 .NET!
canybody point me to a fix? I cant find one, without restoring to original .NET.
I have t the ATT TILT w/ WM6.
I tried the 6.1 update but it has too many bugs for me.