Related
As I am using XDAII for 2003se which is 2.0600WWE downloaded in this forum (http://forum.xda-developers.com/viewtopic.php?t=16880). The radio is 1.18 and the bootloader is 1.01. As I can upgrade my rom from 2003 to 2003se without any problem, I would like to upgrade it to WM5 in these few days.
However, I face some problems in my updating.
I have try XDA_WM2k5_2.01a64WWE, XDA_WM2k5_2.01a00WWE, however, I cannot search the phone network after upgrade rom. As I have read some posts before, I know that there may be my radio's problem, so I upgrade my radio also. I have try 1.17, 1.18, 1.08 with these rom. Unlucky, it also cannot search phone network.
So. for the only solution is get back 2003se with "Asia O2 Xda II WM 2003 SE Upgrade" in this forum. I can get my network back.
As the result, I would like to ask that what problem am I facing and what can I do? Is it the problem of bootloader ? or the problem of radio?
And also, there have "Asia upgrade" for WM5? It helps me a lot and I need not to afraid the networking problem.
Please help me. .
location?
you're lucky you can install that file to your XDA2. Mine can't I donno why. Activesync kept on disappearing. Although upgrading to 2003se is not a problem.
yetdy said:
you're lucky you can install that file to your XDA2. Mine can't I donno why. Activesync kept on disappearing. Although upgrading to 2003se is not a problem.
Click to expand...
Click to collapse
waht edition of active sync do you have? to get wm2005 to work it has to be active sync 4.0 or higher and for the newer roms you have to have AS 4.2 or equivalent beta versions
I come from Hong Kong
I am using 4.2 for sync
I'm currently using AS 4.2. The problem is that I couldn't install WM2005 2.01 64 to my himalaya. Once I double click on the installer, AS disappears and an error screen will come out after 10 mins. I also tried installing WM 3.0 but still the same result. I really wanted to try using WM2005 on my himalaya. could you guys help me?
yetdy said:
I'm currently using AS 4.2. The problem is that I couldn't install WM2005 2.01 64 to my himalaya. Once I double click on the installer, AS disappears and an error screen will come out after 10 mins. I also tried installing WM 3.0 but still the same result. I really wanted to try using WM2005 on my himalaya. could you guys help me?
Click to expand...
Click to collapse
hmmn...
you did not read thoroughly...
AS disappear normally...
are you using the hima no id dot exe?
visit the wiki :roll:
Jojo,
I tried installing the following files that I downloaded through this website:
HIM_3.00a.32_WM5_AKU_3_CLEAN
XDA_WM2k5_2.01a64WWE
WM2k5 3.00a64wwe
I understand that AS will disappear the same way as it does when I installed SE. However, what puzzles me is that all of these installers will inform me that there is an error and I could not proceed further with the installation. I even have to restart my laptop because AS couldn't communicate with my himalaya after my attempted installation.
Sorry I'm not well versed with computer language/jargons that's why I could not understand the readme file. I would really appreciate it if you could guide me. Thanks.
at last installed it! I have to re install though. I restored some of my data and it crashed on me.
guys,
I've installed Globe_all.cab to my Himalaya but I still couldn't email or send mms. could somebody help me out please?
CAn anyone tell me that , any version of WM5 is fit to Hong Kong User.
yetdy said:
guys,
I've installed Globe_all.cab to my Himalaya but I still couldn't email or send mms. could somebody help me out please?
Click to expand...
Click to collapse
high what network are you with and are you on contract or pay as you go?
cause i have the settings for o2 contract gprs and also havw the settings for e-mail etc
I'm now able to access my emails. however, MMS is still a problem. Still can't send or receive. I'm using a globe telecom postpaid line here in the philippines. I installed the attached file for the network configuration but still nothing.
Newbie here,
Flashed my Tmobile SDA (Tornado) to imate_sp5m_wwe_2.6.331.2. Everything looks good, Bluetooth does not work.
Accessing the BT via Comm Manager -> BT Setting, any changes I do for "Discoverable or ON" gives me a message "The settings could not be saved"
BT was working earlier with TMobile ROM. Any help is appreciated..
Thanks
P.S Any place from where I can download the Tmobile original ROM ?
Just wondering, why do you still flash WM5 when you have WM6?
Get WM6, read the tutorial on my signature
Installed WM6
Kar Hoe, Thanks,
I went ahead an completed the install. Looks good, How do I get Windows Live Messenger ??
BTW, BT is still not working, not sure why
I had similar behavior with my older Qtek 8010. One day I found out bluetooth doesn't work anymore. I tried to hard-reset, re-flash, nothing helped, still getting same messages as you. I thought it's broken so I bought Qtek 8310. After some time WM6 for Typhoon appeared so I flashed it to my no more used Qtek 8010 just for curiosity how it looks. I tried to switch bluetooth on and to my surprise it worked without any problem. But don't ask me why
i had this problem but it only stayed till i soft reseted the device.
sunjay said:
Kar Hoe, Thanks,
I went ahead an completed the install. Looks good, How do I get Windows Live Messenger ??
BTW, BT is still not working, not sure why
Click to expand...
Click to collapse
Get it from phil's extras folder
http://www.jm012a9749.pwp.blueyonder.co.uk/Extras.zip
karhoe said:
Get it from phil's extras folder
http://www.jm012a9749.pwp.blueyonder.co.uk/Extras.zip
Click to expand...
Click to collapse
Do the files work on Typhoon as well
They are normal WM6 apps, all should work
Err, hearing the word Typhoon in Tornado forum doesn't sound good, let me warn you. Tornado is not compatible with Typhoon. Don't flash Typhoon into Tornado and vice versa
karhoe said:
They are normal WM6 apps, all should work
Err, hearing the word Typhoon in Tornado forum doesn't sound good, let me warn you. Tornado is not compatible with Typhoon. Don't flash Typhoon into Tornado and vice versa
Click to expand...
Click to collapse
Sorry, I shall be careful next time
I didn't flash the roms interchangibly
Thanks for your help
neitin said:
Sorry, I shall be careful next time
I didn't flash the roms interchangibly
Thanks for your help
Click to expand...
Click to collapse
Lol, you wanted to flash Typhoon ROM into Tornado? Thank god you didn't, or we will have another 'white screen problem' thread
Live Messenger Installed. whats next recommendations
Kar hoe
Installed the live messenger, I see a lot of *cab files, most of the names are meaningful, but some are not,
whats the diff between t9 and xt9 ? I also plan to use VOIP, should i install some of the voip cabs ?
the other question is on reset to see if I overcome the BT problem, if I hard reset, will I loose the cab and the rom installed, I dont mind loosing my data as I have a backup and resync faster. Please advice
Thanks, appreciate all your help
they are different t9 softwares, simple as that, user preference, t9 is the normal one, where else xt9 is slight different
If you are using Andot's PEE, you just need to configure the xml files,
http://forum.xda-developers.com/showthread.php?t=324472
If you hard reset, you will lose your data only, you will still have the cabs and ROM, as long as the cabs are in your storage card
i have a g3 ipl/spl 2.26 completely unlocked device that i have flashed many wm6 roms on in the past. my touchscreen went dead in landscape mode so on a hunch i flashed back to wm5 to try and fix it (which it did). but now i flash the same TNT rom i've flashed a hundred times the same way and everything changes but the OS i tried the boring rom and it changed, but even from there it seems (now) that it's TNT that for some reason won't change the os. any ideas?
which WM5 ROM did you flash back to? was it the official t-mobile ROM?
if not I'd try that first...
if that doesn't work I'd actually take it through the unlocking process again and use that CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM first...the up to t-mobile's offical ROM...then flash to TNT
i flashed back to the latest tmo rom. i'll give what you're talking about a try. as a test i flashed to that one and that's the first one to change the OS. this whole thing caught me by surprise that's for sure.
hope it works for ya...let me know...
update, problem solved! i was using the touchflo rom (love it) and i gave the Professional flavor without the touchflo a try and it worked. all is well.
j3d1n4s7y said:
if that doesn't work I'd actually take it through the unlocking process again and use that CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM first...the up to t-mobile's offical ROM...then flash to TNT
Click to expand...
Click to collapse
hi,
i have the same problem here
what exactly do you mean with "take it through the unlocking process again" should i unlock the wizard again with the service tool (mine is already unlocked and i had 2 different versions of wm6 roms) or just flash the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM and then the t-mobile one?
p/s before flashing the tnt touchflo i flashed the t-mobile rom, and then while flashing the TNT touchflo i got error on 99%. After that the wizard boots only in boot manager and i can only flash t-mobile rom, the other roms i have tested give back errors (i have not tested the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE ROM)
Thanks!!!
Regards
i grabbed the latest lokiwiz and used one of the forum stickies as a guide and relocked it and then followed step by step to unlock again. i can't confirm or deny that solved the problem, but it's worth a shot.
just curious how many about to own fuzers out there will stick with the stock att rom or are planning on switching to another?
what possible negatives are there if any?
lbhocky19 said:
just curious how many about to own fuzers out there will stick with the stock att rom or are planning on switching to another?
what possible negatives are there if any?
Click to expand...
Click to collapse
you should automatically know the answer to this... quite surprised that you actually asked this but OFCOURSE not staying with stock rom ... load's of bloatware and crappy rom ... NO THANK YOU. I'll just flash romeos or natf's when he comes out with his...
flashing a rom that is not your carriers cancels your warranty so you can't get the phone replaced until you have turned it back into stock.
hha stupid question i suppose but i do laugh since your tilt has a stock rom
what about programs like sprite backup and the jetcet print and such that come on the fuze are those available as free cabs or on the romeos?
lbhocky19 said:
hha stupid question i suppose but i do laugh since your tilt has a stock rom
Click to expand...
Click to collapse
trying to return for warranty
I have a fuze with a flashed rom, and 1 drawback is the keyboard layout is different then the touchpro and there is still no cab file to fix it.
yes there is its called htc fuze keyboard fix
i dont know how to upload files here?
Flash Flash Flash
So what actual roms are compatible with the fuze? I got my fuze 2 days before official launch and I'm dying to flash it but I have no clue if the touch pro's custom roms are compatible with the fuze without screwing some stuff up.
Can I actually put TP roms on the fuze without screwing it up?
achild said:
So what actual roms are compatible with the fuze? I got my fuze 2 days before official launch and I'm dying to flash it but I have no clue if the touch pro's custom roms are compatible with the fuze without screwing some stuff up.
Can I actually put TP roms on the fuze without screwing it up?
Click to expand...
Click to collapse
yes you can
just install the keyboard fix after and you are fine
but i do have a question. i have yet to be in a 3g area yet with my fuze since i flashed the rom
3g should work fine with romeos right?
lbhocky19 said:
yes you can
just install the keyboard fix after and you are fine
but i do have a question. i have yet to be in a 3g area yet with my fuze since i flashed the rom
3g should work fine with romeos right?
Click to expand...
Click to collapse
So this would be one of the things that become unstable/broken???
i was just asking i have no idea
Has anyone recontructed the stock from the newly released Fuze yet? My Fuze has ROM vers. 1.95.502.5 WWE. I just wanna know if I'll be able to put the orig rom back on the phone if I have to before I flash it.
briols6 said:
I have a fuze with a flashed rom, and 1 drawback is the keyboard layout is different then the touchpro and there is still no cab file to fix it.
Click to expand...
Click to collapse
The cab is attached
baltika09 said:
Has anyone recontructed the stock from the newly released Fuze yet? My Fuze has ROM vers. 1.95.502.5 WWE. I just wanna know if I'll be able to put the orig rom back on the phone if I have to before I flash it.
Click to expand...
Click to collapse
Almost flashed... and noticed that the ATT build might be newer.
FWIW ATT did a nice job with the default settings (i.e. sounds/notifications), but would like to have the optimized memory pool from a cooked rom.
stock rom lasted 24 hours here before being destroyed....
Romeos2 is what I ended up with... at&t stock rom seems to ignore/bypass registry settings on some stuff (startup/shutdown animation, HSDPA support, etc.)
Glad I made the switch.
What I ended up doing is flashing an HTC ROM and then just the radio from AT&T, in oder to maintain 3G capability. Of course, the Hard SPL flash comes first.
I flashed my Fuze right away.
I had to exchange it because of an annoying slider wobble issue. I didn't bother flashing it back.
The guy at the AT&T store didn't even notice.
BTW... My second FUZE had a much better/tighter slider. No wobble at the top in the closed position.
When I get mine next week, I will run it for a day or 2 just to make sure that all is well, and then it is the Elite Team rom for me......
Later............
I will flash mine but just wanna make sure I start with a working device.
Do I need to unlock the Fuze to flash ROM?
Will Kaiser SuperCID and Security Unlocker v0.1 work with the Fuze?
wmserver said:
I will flash mine but just wanna make sure I start with a working device.
Do I need to unlock the Fuze to flash ROM?
Will Kaiser SuperCID and Security Unlocker v0.1 work with the Fuze?
Click to expand...
Click to collapse
you just need the raphael hard spl
Hi, ive flashed a few handsets before (wallaby x2, alpine and a wizard) and had no problems but for some reason cannot even get off the first hurdle with my t-mobile vario iv and cant even unlock the dam thing to flash a custom rom! ive looked at post after post and downloaded so many programs like hard spl and nothing works. the programs ether wont even open or they fail half way through the process but havent bricked my phone so far (fingers and toes crossed!) please could someone help me with what unlocking software i need, what radio rom and main rom i should be using. Really i would like to try a standard wm6.5 rom and then try custom roms after but like what nrg have done if stock is not avaliable. its model is RAPH300 part no- 99HFP013-00
my current rom version is 1.69.110.8 WWE
my current radio version is 1.02.25.19
protocol version 52.33.25.17U
my email is [email protected] if you prefer to help via email
thanks in advance everyone, steve.
Anyone out there?
Ensure you have hard SPL'd your handset before trying to flash ANY custom roms
before you do that, see if there is an updated T-Mobile rom, see if that update will work, if that update works without any glitches then it'll be alright, if you get an error with an official update then possibly something wrong with either your pc setup or the handset
if your using vista, make sure you've got the windows mobile device centre installed, if not, you need to go to microsoft and download it
if using windows xp, make sure you've got the latest activesync installed.
ensure the cable your using is not faulty by trying it with a different cable
and good luck!
duke_stix said:
Ensure you have hard SPL'd your handset before trying to flash ANY custom roms
before you do that, see if there is an updated T-Mobile rom, see if that update will work, if that update works without any glitches then it'll be alright, if you get an error with an official update then possibly something wrong with either your pc setup or the handset
if your using vista, make sure you've got the windows mobile device centre installed, if not, you need to go to microsoft and download it
if using windows xp, make sure you've got the latest activesync installed.
ensure the cable your using is not faulty by trying it with a different cable
and good luck!
Click to expand...
Click to collapse
thanks for trying to help, have you ever read something over and over and repeatedly missed something in it? i think thats what i did wrong. i did not see the bit about removing my sim card even though i had read the noobs guide again and again. removed my sim and bosh, spl worked! then everything else was a breeze and i am now running the energy 3.0 wm6.5 rom! havent flashed the radio yet but will probably do that today. the energy rom is a vast improvement on my stock 6.1 rom in many areas and seems to have improved camera performance quite a lot (not quality) and the menus are going to be great once i have got used to the totally different interface. does anyone have any sugestions on other roms tha may be better than this one?
Hi there
Glad to hear you got it working!
I am personally using NATF's WM6.1 lite touch pro rom as all i look for in a rom is stability as i actually use my phone for phone/text purposes and there is nothing more annoying than a hanging phone when your trying to quickly reply to a text message!