Database Info

[SOLVED] Screen & Speakerphone Issues.

First of i want to thank the many people on here that have tried to help me fix my problem, from the PM's to the replies in various topics i posted on. Let me refresh you of what was going on. My screen would turn on by itself and turn off after 10 or so seconds and turn on Car Mode while doing this. This would happen at random times, but lately it would do it continuously. It would turn for 10 seconds or so, turn off, then turn right back thus draining my battery in a matter of an hour or so. Also, with this problem the speakerphone would be on by default when i received/made a call since the phone thought it was in car mode. This would annoy the piss outta me!!! I had traded my iphone 4 for the inspire and found myself wondering WTF did i just do. The phone had worked great when i received it. It had the Ingersoll Rom on it but I had wanted something with more eye candy so i installed Coredroid. It seemed like after i had done this, my problems had started...
I installed just about every ROM i found on XDA to see if it was a problem with a flash or something. No Luck. I began to google my problem and found it to be quite common and wasn't related to a specific ROM at all, but no one seemed to have a fix for it. To me it seemed the phone was almost shorting out. So i thought the connection in the usb port was jacked up. I ended up shoving a USB cable from monoprice in and bending it upwards. I suspected that this cable was the culprit so i didnt care if I bent the **** out of it. It worked for maybe 5 minutes or so. That was a big step for me! So after that i decided to use a small flat head screw driver. I took out the battery, micro sd and sim card. I laid the phone screen up on my desk and stuck the screwdriver in the bottom of the usb port and pried up on it rather hard. By the bottom i mean the on the bottom side of the 5 connectors. Thats all! My phone is rock solid again and i don't have to use my Upgrade, which took effect today lol. I am not sure if this is a permanent fix or not and i take NO responsibility if you try this and end up [email protected] your phone up. Sorry for the long read.

[Q] Dropped phone, now charges only on a whim and no OTG

Well, this isn't the best place to ask, but I'm not sure where else to do so. Somehow I managed to drop my phone (onto a carpeted floor from not quite a full standing height, not concrete or anything) and it landed right on the bottom I think. I can't see any signs of damage anywhere at all -- I even pulled out the screws and looked at the PCB itself and I just can't see anything obvious at all. Unfortunately, something obviously is wrong all the same. It simply will not charge at all most of the time, though seemingly randomly on a whim when I connect it sometimes it will. I'm afraid even to touch it once it finally does as just moving the cable around seems to be enough to make it stop sometimes (whereas at some other times I can move it around a lot and everything and it still stays connected.) Last night it decided not to even charge even though the LED indicator and the icon showed that it was connected. What's more, I can no longer use the USB OTG capability to plug in USB drives, other devices, and etc (which I used for diagnostics, repairs, and etc of other things on the go.) I have multiple batteries and external chargers, so this isn't completely fatal but it means:
A. I can't keep it from running the batteries down in the first place (which means larger wear and tear on the batteries long-term since they are discharged further before charging.)
B. Since it's like this it means generally speaking it's not as ready for a fully day of use since it's starting the day with less than 100% charge before I even leave for work every time now.
C. I really did use the USB OTG feature and have already been missing it. It's not as fatal as devices like my Nexus 7 (since that lacks a MicroSDHC card reader to supplement its internal storage whereas this has one) but very annoying at least.
D. I really really miss being able to use a phone dock! I was docking it in my car to keep it at least semi-charged and to output a line output to my car stereo system. It's kind of a pain having to change the volume back and forth between headphones and line output (since a line output really needs the full volume) and obviously it uses more power while playing than just sitting quietly in a pocket anyway. I also liked the way in the dock it wouldn't completely shut off the screen, just go into a really low power mode where it had a faded clock (might be a CM10.1 feature, but nice wherever it came from) and I could just touch it to get back to the player controls.
At first I thought it was just loose, so I tried putting a very thin piece of plastic in the top part of the connector so the connection is extremely tight which fooled me at first by pretending to work really well for a while, but then after a while it just did the same stuff all over again (so it was just doing that thing where it works fine for a little while even when I move the cord around.) I just can't see what could possibly be the problem though because if there is any damage anywhere I'm just not seeing it. I really don't see how the connector could have been damaged anyway since it more or less landed straight on the middle of the bottom (and that ring that goes around the side should have absorbed the shock) but with no cracks on the PCB or anything that I can at all see I can't imagine what else it might be -- plus a few times when it decided to charge it was just sitting flat not being touched and suddenly started working randomly. It really is like it just works on a whim here...
So I'm wondering: just how screwed am I here? I don't have any sort of drop insurance -- I've never dropped a phone in a way that damaged it before -- and I don't think there's any way I could afford the ridiculous amounts they'd surely want for a repair (not to mention that for a while I'd have no phone at all if I did that...) I thought about changing out the connector myself (I see one on Amazon for $8 which is ridiculous, but obviously it has to be the exact same connector) but I'm not terribly confident about desoldering and resoldering something with such small connectors as it is and that one is hard to get to anyway. Besides which, I'm not convinced it is the connector even if I can't see what else it could possibly be. What could possibly be causing it to be quite so random about this? Is there any way at all I can fix this myself, or is this something where the only way of ever getting it fixed would be to take it in for repair at extreme cost (and no phone for a while too)? Anyone have any idea what it might cost for such a repair?

Well I'm sure you noticed the metal charging usb port that is connected to the circuit board.
It sounds to me that it may have broke free a little bit and not making a solid connection.
First thing I would do is try some one else's charger and see if it works ( Just in case)
Then If that failed I would take apart the phone and inspect the connector.
Ten screws on the back plastic and one little black one on the circuit board.
Next you pop off the ribbon connectors and finally pop off the wire connector that runs along the right side of your phone when laying face down,
Double check all connectors and remove circuit board carefully.
Now you will be free to inspect connector
For all you know. Pushing it down with some pressure on the thumb may give you the connection you need again and you should be good to go.
But you really need to see what's broken before you go to fix it.
Good luck. Pm me if you need further help

Well, like I said, I opened it up and I just can't find any signs of damage to the connector or the board. Also, if you look at the SGS3, the connector is actually inside the casing somewhat, so really I don't see how it could have bee damaged anyway -- I'm just not sure what else it could be since, as I said, I also couldn't find any cracks in the PCB or anything.
Oh, and I've used four different chargers and at least three different cables. One charger and cable is the OEM set for the SGS3 and another is the OEM set for the Nexus 7 (which is probably a decent amount more more power hungry.)

Nazo said:
Well, this isn't the best place to ask, but I'm not sure where else to do so. Somehow I managed to drop my phone (onto a carpeted floor from not quite a full standing height, not concrete or anything) and it landed right on the bottom I think. I can't see any signs of damage anywhere at all -- I even pulled out the screws and looked at the PCB itself and I just can't see anything obvious at all. Unfortunately, something obviously is wrong all the same. It simply will not charge at all most of the time, though seemingly randomly on a whim when I connect it sometimes it will. I'm afraid even to touch it once it finally does as just moving the cable around seems to be enough to make it stop sometimes (whereas at some other times I can move it around a lot and everything and it still stays connected.) Last night it decided not to even charge even though the LED indicator and the icon showed that it was connected. What's more, I can no longer use the USB OTG capability to plug in USB drives, other devices, and etc (which I used for diagnostics, repairs, and etc of other things on the go.) I have multiple batteries and external chargers, so this isn't completely fatal but it means:
A. I can't keep it from running the batteries down in the first place (which means larger wear and tear on the batteries long-term since they are discharged further before charging.)
B. Since it's like this it means generally speaking it's not as ready for a fully day of use since it's starting the day with less than 100% charge before I even leave for work every time now.
C. I really did use the USB OTG feature and have already been missing it. It's not as fatal as devices like my Nexus 7 (since that lacks a MicroSDHC card reader to supplement its internal storage whereas this has one) but very annoying at least.
D. I really really miss being able to use a phone dock! I was docking it in my car to keep it at least semi-charged and to output a line output to my car stereo system. It's kind of a pain having to change the volume back and forth between headphones and line output (since a line output really needs the full volume) and obviously it uses more power while playing than just sitting quietly in a pocket anyway. I also liked the way in the dock it wouldn't completely shut off the screen, just go into a really low power mode where it had a faded clock (might be a CM10.1 feature, but nice wherever it came from) and I could just touch it to get back to the player controls.
At first I thought it was just loose, so I tried putting a very thin piece of plastic in the top part of the connector so the connection is extremely tight which fooled me at first by pretending to work really well for a while, but then after a while it just did the same stuff all over again (so it was just doing that thing where it works fine for a little while even when I move the cord around.) I just can't see what could possibly be the problem though because if there is any damage anywhere I'm just not seeing it. I really don't see how the connector could have been damaged anyway since it more or less landed straight on the middle of the bottom (and that ring that goes around the side should have absorbed the shock) but with no cracks on the PCB or anything that I can at all see I can't imagine what else it might be -- plus a few times when it decided to charge it was just sitting flat not being touched and suddenly started working randomly. It really is like it just works on a whim here...
So I'm wondering: just how screwed am I here? I don't have any sort of drop insurance -- I've never dropped a phone in a way that damaged it before -- and I don't think there's any way I could afford the ridiculous amounts they'd surely want for a repair (not to mention that for a while I'd have no phone at all if I did that...) I thought about changing out the connector myself (I see one on Amazon for $8 which is ridiculous, but obviously it has to be the exact same connector) but I'm not terribly confident about desoldering and resoldering something with such small connectors as it is and that one is hard to get to anyway. Besides which, I'm not convinced it is the connector even if I can't see what else it could possibly be. What could possibly be causing it to be quite so random about this? Is there any way at all I can fix this myself, or is this something where the only way of ever getting it fixed would be to take it in for repair at extreme cost (and no phone for a while too)? Anyone have any idea what it might cost for such a repair?
Click to expand...
Click to collapse
You might as well try it yourself THEN go somewhere if it doesn't work out. I wouldn't think if things go horribly wrong that you'd do damage that isn't reversible, and if there was damage it would likely be just to that $8 piece.
You sound like a knowledgeable guy though, so I'd give it a shot.
Sent from my SCH-I535 using xda app-developers app

The thing is, I don't really want to spend the $8 (I'm getting pretty broke) and have to try to desolder then resolder those tiny contacts on a board I'm not even entirely sure how to safely get out possibly messing something else up along the way when I'm not convinced it is the connector (and obviously if I messed something else up along the way I could make things a lot worse -- for instance, breaking it entirely...) Things that should make it work if it were (jiggling and shaking it for instance) don't seem to and then some things that should work don't (for example, last night I disconnected the phone from one charger and connected it to another while it was at least pretending to work and it stopped even though the connector part didn't get moved at all.)
That's my real concern in the end. If it's not the connector, what is it? I'm not 100% confident about trying to replace it myself as it is, but if it's not that the time, money, and effort would be wasted...

Well that's that. The problem, as I feared, was more fundamental (which is part of what I was asking here.) I plugged in something last night and it just shut off. I checked all over and couldn't find shorts or anything to explain it. Even after leaving the battery out overnight it still won't come on. Clearly the problem was much more fundamental than it seemed. Regardless, the question of the connector is moot now. EDIT: It might have been caused by the connector after all. It seems like there are pins at the back that either are loose or were knocked loose by the fall. I THINK one of them was touching another causing a short. Unfortunately, it's too late to discover that now as either way the damage is already done and it no longer works even after I got them straightened out.

Dropped my phone, won't boot?

Been a watcher on the forums for awhile, now I actually had to sign up and get some help, LOL.
Anyway, dropped my s2 skyrocket, noticed that it kept trying to reboot every now and then when I used it the same day. The next day, I plugged it in in the evening, and shut off, rebooted, but the screen would go black and the phone would vibrate with 2 seconds in between vibrations. It gets to the "Samsung" word, then the screen goes black in the style of an old tube TV (with the thin white line at the end). Then the vibrations start. So far a useless phone. Took it apart and checked connections carefully (I'm used to working with processor boards quite a bit).
What do you guys suggest? Damaged memory? Should I attempt to reflash? Stuck power button (seemed ok, though)? Bad screen?

Well, probably some kind of physical damage, but hard to say. Anyway, you posted in the forum for SGH-I777 but you have the SGH-I727, so I would suggest that you look in the correct forum.

creepyncrawly said:
Well, probably some kind of physical damage, but hard to say. Anyway, you posted in the forum for SGH-I777 but you have the SGH-I727, so I would suggest that you look in the correct forum.
Click to expand...
Click to collapse
Oh, thanks for the heads up. Yeah I just figured out that the i727 isn't in "Top Devices" or "Legacy," so you have to go to all forums. Ugg. Already moved. Thanks to whoever notified mod.
Anyway, yeah, any help would be AWESOME. What physical damage would prevent booting past the "Samsung" screen and default to a black screen that intermittently vibrates?

I'll be honest, if ur asking that question probably something u don't have the current skill set to fix. Try to Odin back stock, but if it started post-drop you may be SOL and in need of a new phone.

Got it into download mode after multiple failed attempts. Each time I would get it into download mode, the screen would shut off after about 5 seconds of being on. I tried several combinations of plugging it in first, then installing the battery, or holding down the button while I plugged it in with no battery, etc. I had just given up after getting it into download mode briefly for the 20th time, when I gave it one more go while rocking the on and off button. Technically that is recovery mode, but I let off right before plugging the phone in and it hit download mode and stuck.
So what I am thinking is the power button got jammed internally. I have heard of it happening on other forums. Even though it looks good and clicks upon external examination, the pressure circuit on the inside might be in contact. Anyway, just one theory.
For future though, I did discover that you don't HAVE to have the USB unplugged prior to getting into download mode. On the contrary, a power source must be present in order to register that the keys are pressed PRIOR to initiating USB input. Thus, you can actually remove the battery, plug in the USB (power source), then hold the volume keys while replacing the battery. Goes into download mode that way, too.
Will keep you guys updated. Might need a bit more help if the phone starts acting up again.
At this point, if the Download mode still holds ok, should I consider CyanogenMod, or is it easier to get back a good ROM from stock?

icenight:
Thanks for the reply. I don't understand much about smart phones or how they work, but trust me when I say I have had AMPLE experience with electronics, circuit boards, hardware, etc., particularly in the computer/laptop world. I code quite a bit of websites, and understand almost all things networking and OS. Just never really got into it with the phones.
Getting super excited to see the sheer amount of modding you can do though. Would love to break into a hardware modding world if it ever comes available. That's where it's at with electronics for me.

Well glad u got it sorted, lucky guy you are lol.
As for boards and the like, if it didn't work I would've suggested replacing the motherboard and/or power daughter board. But for a skyrocket may not be worth the money.
Since you're a hardware guy, maybe mess around with the phone and JTAG? Finding a way to unbrick without it would be very helpful

Since the problems started after a physical damage (fall) , I wonder how would Odin or wipe and flash might work !
Definitely a hardware damage...

Yeah, it kinda puzzled me, too. I believe the power button might have been internally stuck, but that's just one idea. Could have been a loose connection, too.
Can you lose some solid state memory with firmware on it, but the SS memory still be OK to right another copy on?

More than likely it was your power button
Sent from my SAMSUNG-SGH-I727 using xda premium

Black screen after getting hot while charging

Hello together,
I have a Z5 (6653) that didn't start anymore and got extremely hot while charging. To be more clear: after connecting the phone to the charger the red LED turned on, then after about 10 seconds later it turned off again. From this moment on the phone's back started to get extremely hot. The source of the heat is about 1cm right and 1 cm down to the back camera (so you can say 1cm diagonal from the camera to the phone middle). Because of this I doubt it has to do with the battery as it should heat the lower two-third and not the upper third of the phone. Maybe the processor is at this place?
I tried to connect the phone in flash mode with the PC and it connected, but disconnected after a few seconds, probably because battery was empty. I repeated this procedure (connecting to charger, disconnecting, reconnecting, connecting to PC) a few days and suddenly the red LED kept on and the phone didn't get hot anymore.
So I charged the phone fully and wanted to start it, but the screen won't turn on anymore. Connecting it to the PC and the Phone drive (MTP) is displayed but empty, because you need to unlock screen. Also I hear the connecting sound of the phone and touch feedback sounds.
I tried the following things:
Xperia Companion Repair
Flashtool flashing newest ROM
Flashtool downgrading to 32.0.A.6.152_R5B (LP ROM)
Nothing helped. Well, the idea it is an hardware issue might be at hand, but maybe there is something else I can try first?
And if it is an Hardware issue, what is the cause? The Display itself? Then why was a single point at the phone back the source of heat and not a large area on the phone front?
A short summary:
Phone gets hot while connected to charger
Battery won't charge (LED indicator turns off after few seconds)
Source of heat is 1cm to the right and down to the back camera; after 2 minutes whole phone is hot and you can't recognize the source
After days of repeating the action (connect to charger, disconnect, connect to PC, connect to charger) it suddenly charged the battery and didn't get hot anymore
Display won't start anymore; still responsive
Tried Xperia Companion Software repair
flashed latest Stock ROM
flashed Lollipop Stock ROM
Phone has locked bootloader and is/was not rooted. I'm grateful for all help!

I guess its a dead screen maybe u droped it and the pins of the screens got ejected from the motherboard.. Ignoring the fact that it was empty of charge and you charged it.
From what i understand that the phone is working but there is no screen.
The best thing u can do is to check a hardware store that is capable of diagnosing the issue.
Im not helping here i know but wanted to share my thoughts..
Gd luck with that.

Thanks for this anyway. But phone didn't drop.
The fact that the phone wasn't charging and got hot instead at the beginning is very irritating. Especially that it wasn't the front but a point at the back near the camera. Is there a way to check if it's a Display issue and not a Mainboard/Processor/other Chip issue?
At least in Germany are a lot of stores that aren't too competent at all. But nobody would tell you, so its very helpful to know as much as possible before going to a store.

I think it might have something to do with the gpu inside the soc? The heat might have burned something inside the mainboard (how hot was it btw, like running intensive apps or even hotter than that?) Another thing that might have happened is the display cable is loose.
I've seen some Z5's screens and they're not that easy to die.
The best thing I can suggest is that you repair it in a trusted shop that lets you observe the repair procedure directly (open the phone, take the parts out, identify the problem).
Good luck with your phone.

colorado48 said:
I think it might have something to do with the gpu inside the soc? The heat might have burned something inside the mainboard (how hot was it btw, like running intensive apps or even hotter than that?) Another thing that might have happened is the display cable is loose.
I've seen some Z5's screens and they're not that easy to die.
The best thing I can suggest is that you repair it in a trusted shop that lets you observe the repair procedure directly (open the phone, take the parts out, identify the problem).
Good luck with your phone.
Click to expand...
Click to collapse
I never played any game so it is hard to compare, but I never had a phone in my hands that got this hot before. You didn't get instantly burned touching the phone but it was already inconvenient hot for your fingers/hand.
There might be some trust able stores to find, but I doubt somebody will let you observe it, not even Apple store does. If you see the trick of how to repair it easy and fast, you might do it yourself next time. And it is also a question of the price. If I can buy a used but totally unharmed Z5 for the same price, why should I let it repair?
As far as I could see in Germany repairing Display starts at 99€ for the Z5. Buying display with adhesive would start at 49€. But if they change the Display and it's still broken you have to pay for the Display and also for the mainboard i.e.

S6 hardware troubleshooting - 3 phones can't figure out the issue

Hey y'all, so I'm not sure how well hardware related questions go down on here usually, but not sure where else to ask. So I have about 2.5 Samsung Galaxy s6's. All were given to me at different stages slash periods of time and none of them exactly work fully. Where I am at now is sort of realizing that either: 1. I have to faulty digitizers, or 2. the one battery I have between them is completely shots, or 3. a combination of one and two as well as some other s*** going on.
So what I have for parts AR, two motherboards two digitizers, three bodies, and one battery. I get kind of the same issue switching between the motherboards which is this: I will plug the phones in to my computer and it will read them and say something like SM and then the numbers that represent the s6, and I'll have a either red l LED for a while which will then turn green after a while charging, or a blue LED from the get-go which I believe just stays blue the entire time. Now, the weird thing is that neither of the phones will turn on, however, whenever I push the home button with either digitizer or either motherboard, it will cause the LED to turn off, but will not cause the phone to stop being recognized by the computer. When I say recognized by the computer I don't mean it shows up in the my PC folder, like where I can access the files and such, it just shows up in the device manager, thus giving me the impression that it never actually turns on. This also happens if I end a press up on the volume at any point in time. Also worth noting whenever I unplug it from the computer or just from the charger, the phone will power off completely as in not be recognized by the computer. So, any ideas? I'm thinking of just selling the phones as is maybe for a 150 total for everything but I'd like to fix that myself if it's just something as small as a battery issue. the volume up button and the home button turn the phones off though, is what really perplexes me. Thanks for any insight, much appreciated for the read and have a good Thanksgiving.

DeepPuddles666 said:
Hey y'all, so I'm not sure how well hardware related questions go down on here usually, but not sure where else to ask. So I have about 2.5 Samsung Galaxy s6's. All were given to me at different stages slash periods of time and none of them exactly work fully. Where I am at now is sort of realizing that either: 1. I have to faulty digitizers, or 2. the one battery I have between them is completely shots, or 3. a combination of one and two as well as some other s*** going on.
So what I have for parts AR, two motherboards two digitizers, three bodies, and one battery. I get kind of the same issue switching between the motherboards which is this: I will plug the phones in to my computer and it will read them and say something like SM and then the numbers that represent the s6, and I'll have a either red l LED for a while which will then turn green after a while charging, or a blue LED from the get-go which I believe just stays blue the entire time. Now, the weird thing is that neither of the phones will turn on, however, whenever I push the home button with either digitizer or either motherboard, it will cause the LED to turn off, but will not cause the phone to stop being recognized by the computer. When I say recognized by the computer I don't mean it shows up in the my PC folder, like where I can access the files and such, it just shows up in the device manager, thus giving me the impression that it never actually turns on. This also happens if I end a press up on the volume at any point in time. Also worth noting whenever I unplug it from the computer or just from the charger, the phone will power off completely as in not be recognized by the computer. So, any ideas? I'm thinking of just selling the phones as is maybe for a 150 total for everything but I'd like to fix that myself if it's just something as small as a battery issue. the volume up button and the home button turn the phones off though, is what really perplexes me. Thanks for any insight, much appreciated for the read and have a good Thanksgiving.
Click to expand...
Click to collapse
dang man, id just sell em unless you want a winter project. I just bought a Sunfire sub that has some issues for a winter project, but thats because im a dork and i like that kind of stuff. Anyways, my opinion is just to sell it and get something else that works. I had a buddy offer me a HUGE pile of phones and their respective parts to fix them for like $200 and i gave a hard no.

Damn never heard of such an issue? I'd had hoped that the volume up key as well as the home button both restarting (or, turning the LED off for about ten seconds at least) would have been some kind of dead giveaway, if not just a straight up common occurrence, haha. I even got ANOTHER S6 last night from a homie (asked her if I could borrow the battery lol, she just gives me the whole broken phone) to try and switch out parts, which I'm gonna give a quick shot at tonight at least. But man, no responses other than hours has me quite discouraged :') lol thanks for the time to read at least tho my dude ?