Hello,
i have a Nokia LD-3W bluetooth GPS module, i cannot pair it with Vox. I insert the 0000 code, the blue light appears on gps module but it flashes only 1 time, it do not remain connected. Route 66 does not detect the GPS also. I have searched the internet for a solution, its something about serial ports i think, i have chaged all the options but cannot connect. Someone said in a website that with Phone Bluetooth Tools it would be possible to solve this problem (because the Qteks S100 and S200 cannot connect to this GPS too), but i cannot install it on Vox. Please help me, i spent almost 5 hours searching for a solution but haven't come with one yet.
Related
I am not able to use the receiver with Autoroute 2004(pocket streets). The manual suggests that I ensure a virtual COM port is established before connecting the receiver, which I am not able to get around. I am lost and stuck with an expensive receiver. Can some help, please? ASAP
Daz, when you try to run the program does it give the option to choose your gps/com port?
no, nothing came up on the screen. Fortunately I have been able to resolve the problem. Need to disable to incoming beam option in connection setting
I currently have the same problem with rakaline 6031-x7 and tomtom navigator. I use to connect the gps reciever via blutooth manager as slave and then set it up in tomtom on my ipaq. now I can't find any options in bluetooth settings on my xda2. Any chance of a little help?
:?
gavcha, the xda2 is braindead where bluetooth is concerned, are you running the latest gps 2.09 from tomtom? If you are using that and it still isnt working, download towas patch, remove the gps from the bonding on your bluetooth, install towas patch, run tomtom wizard, gps manager in discoverable mode, add device in bt manager by choosing "new", choose the gps, ok everything, towas patch should then come up and give you the serial option, choose that. When finished go to tomtom gps, choose tomtom bluetooth and in the second drop down your gps should be available, choose that and it should work.
Cheers mate. me being the impatient ba£$%rd that I am found this site
http://bluetooth.i-networx.de/index_e.html
Very usefull, up and running in no time. Seems to be in the same vein as your suggestion. Thanks for all your help I am slowly getting use to this xda milarky! Finaly I can sell the Ipaq!!!!
Cheers again.
Good to know it works, when O2 release the update it should get better, by the way that link you posted has been a pain in the ass for me, I have clicked that link in numerous posts and NEVER been able to connect, I have the patch now but does anybody else have problems linking to the above link.?
yeah i had problems going back to it when i was checking it to put it in my last post. try googling xda2 bluetooth manager. thats what took me to another forum with the link to this. worth a try. :idea:
I got a GPS receiver, this one: http://www.widget.co.uk/asp/product...cat=45&ph=&keywords=&recor=&SearchFor=&PT_ID=
It didn't come with any instructions.
I am trying to pair it with my phone, as Tomtom 5 asks me to, but I don't know what passkey to put in or how to go about doing it...
I have created a connection to it in bluetooth manager and tried to add it in tomtom to no avail.
I have an XDA 2i with all the default ROMs etc.
Can anyone point me in the right direction please?
Thanks.
[Edit]
After digging around on the net I found out how to pair them. It seems that the company who sold me this didn't even include the code to pair the device with! Now I have the problem of tomtom not detecting it...
It seems that COM6 is the port which the bluetooth GPS receiver is on but in tomtom it only lets me select from COM4, COM2 and COM9 - how should I go about connecting it?
NB: I have tested the GPS with some application that I found for it on the net and it *seems* to not have a fix, though it has been connected and turned on a long time.
Try this;
http://forum.xda-developers.com/vie...ostorder=asc&highlight=tomtom+5+gps&start=100
Edit
1st Post on page 1
Hello,
I've the following problem. I've a MDA Pro with WM6. It's a german Maxstegi 4.7, but I tried 2 differnt ROMs from your board but my problem persists.
Bluetooth is activated and working. This I checked with a Siemens HHB-750 A2DP Audiotransmitter. Then I tried to connect my i747
http://www.transystem.com.tw/p-gps-iblue747.htm
and googlemaps, wififofum and Tomtom can't find it, regardless of every combination of settings in external GPS and Bluetooth. The funny thing is that Navigon detected the GPS on COM1: serial cable but wasn't running because of memory problems. I checked the gps mouse with my laptop and it's running fine.
My question now: Has anyone this gps running on a Universal with WM6 or does anyone know about problems with the bluetooth stack and how to correct it, or which GPS via Bluetooth works somewhere with Tomtom?
Thanks
Alsaya
I have 727 and universall and WM6.0 (but french FLA242). no problme just have to do partenership and open a com port (for tomtom and universal it's com4. uncheck secure connect
@stephane.papin
Hello Stephane, I tried com4 with and without external GPS - no success. Secure connection is unchecked. Any more suggestions, please.
Alsaya
I've Radio 1.17. Is Bluetooth a function of radio? Will 1.18 help?
Thanks
Alsaya
hello and happy new year to all!!!!
i have tried all wwe roms from wwe 03 up till present wwe 05 rom which im currently using on my htc magician device.i keep trying everyone of these roms in hope to get tomtom 7 up and running.i cant get my external gps devise to be seen by tomtom i get as far as pairing via bluetooth i have gpsgate and also gps proxy gps2blue also tried gps test version 1.04 which scanns ports but still does not find my gps! my gps devise is bt 541 holox which working fine with nokia n95 but due to tomtom mobile maps being up to date. i would be gratefull if some one might help me step by step manythanks
Hi Mr Joe,
I've tried to use Tomtom 7 with wwe 03 and same problem.
The only way to use it that i've found is to download GPS proxy on this site :
http://sourceforge.net/projects/gpsproxy/
You had to add a outgoing port in your GPS BTH (port 6 by exemple)
With gps proxi , you've to create a virtual port 4 (automatically) and via the option, configure entry port 6 and outgoing port n° 4.
with tomtom, u choose port 4 for you GPS and it's works.
hi thank you for your swift reply
i tried as mentioned above and gps proxy says
the nmea input provider failed to start creatfile failed 55
lol still pulling hair out i must have spent about 60 hours searching forums and diffrent apps
after uninstalling gps proxy i reinstalled gps proxy to find error on screen saying i needed opennetcf.sdf.ppc.arm.cab im still searching for this file lol
every time i try install gps proxy it say you need blah blah file befor it will work i keep downloading these diffrent files and installing them then keep uninstalling gpsproxy 2.2. then again and again .......... im so frustrated all i want is tomtom 7 up and running with my gps device. is there anybody who has wwE 05 FOR 64MB DEVICE who has not had to spend approx 65 hours trying diffrent roms diffrent apps to get tomtom 7 working?????????????????anyone know what other files are needed in wwe 05 64 mb device to run gpsproxy????????????? anyone have a list or even a simply way?
OK I FOUND FILES HERE http://sourceforge.net/projects/gps...6/GPSProxy-1.6-ARMV4-NoInstaller.zip/download
I INSTALLED BUT I KEEP GETTING
THE NMEA IMPUT PROVIDER FAILED TO START: CREATFILE FAILED :55
ANYBODY ANY IDEAS?
STARTING TO THINK AM I JUST BEST TO INSTALL WM 2003
How can i close posts?
i tried this with gps proxy....
i have a bluetooth gps mouse from nokia...
model: ld 1w
I pair my magician with the mouse.....after that i set the gps mouse to comport 6.
Now i run gpsproxy and setup my device:
i add Virtual port com4
in nmea i use for incoming port 6
then i set outgoing port to port 4...
the i push start...
then come "fix typ: invalid"
any idea??
i found 'igo8' to work best on magician.
i use a blue-tooth gps, use standard gps port with the rom, done. no issues and quick.
i can still use my bluetooth car hands free at same time too.
(wwe rom 3.06)
I too have problems with my external GPS (sold under T-Mobile NaviGate Bluekit III mouse, but it's Leadtek under the hood) under WWE_O5 , but I think it's more related to the Bluetooth stack
here's what I did
-> add new device
-> Leadtek Bluetooth GPS shows up, next
-> Passcode is prompted, 0000, next
-> Device added, your pocket PC has connected with Bluetooth GPS
everything is fine up till this point, now the GPS shows up under "disconnected"
Now when I single tap it to turn on Serial Port, save and connect it say
CAnnot connect, your device did not connect With Leadtek Bluetooth GPS. The connection failed or the passcode is incorrect
I'm pretty sure it's not the GPS itself since it ran fine with the vanilla firmware
This is pretty much the only thing that keeps me from fully enjoying the rom, though
Hello
I'm in the same situation as you. I have tried a large number of settings to get TonTom/ to connect to my BT GPS ( I've tried Holux 236slim firmware 3.1.0, Holux236slim Firmware 3.1.1, Holux1000B). None of them are identified by TomTom. I have also tested a handfull of other GPS applications without any problems, they are running perfect. I,ve resetted all GPS's to factory basis, I've modified baudrates, S/N and so on without sucess. tested with and w/O WM "external GPS"-program. The "external GPS" does anyhow transfer the correct comport to Tomtom.
No sucess. No sucess.
By trying the other GPS alternativs inside Tomtom gps-configuration, I've ben able to for a second been capable to get the GPS signal.
-Something is wrong inside WM6.5 , S100 or Tomtom.
P-O
Edit
After first removing all setting for BT then removing the main battey, getting low capacity in back up battery, reinstalling BT-GPS ( Holux m1000b) i've got the Tontom to connect to the GPS. I've used the port (in Tomtom GPS konfiguration) given by the BT-setting, com 7 in my case. It failed when chozing the port given by the "external GPS#
The installation is not stable. after shutting down the S100 and restarted. It failed and I had to remove main battery again. Now its working.
I do not dare to test with another GPS yet.
P-O
Second edit
I have sucessfully connected all my GPS decvices. Anyhow the connection to Tomtom is more unstable on the magician then on my other phones (Wizard and Herald with WM6.1). Unstable in my case means: loss of connection, have to reinstall GP-device and reboot. Anyhow. I have beiing driving 400 km today without any problems.
P-O
hi,
im using mda compact(htc magician and 05 64mb rom cotulla ) i have tomtom 7 with new maps demo works great ,only problem is can not get tomtom to see my bluetooth gps!
(gps works with a program called sky traq only settings i needed to set up is find bluetooth device and then connects, picks satellites up in a split second )
my question is there a program that will tell me what port my gps device using? is there away maybe with a registry editor to find out what port tomtom 7 is using?and possibly if needed a program to see what com port my bt 541 gps device uses or needs??
bluetooth setting
do i pair(i imagine i need to so i have
secure connection tick or untick?
bt com port?
only have choice com 6 com 7!
what are the recommended settings in external gps ?
program port?
hardware port?
manage gps automatically do i tick or untick? i have tried lots of settings i got as far as seeing no gps device in tomtom but with satellites greyed out like its stuck but i cant remember settings i used
hope some one can help me out ?????thanks for taking the time to read my post