Related
Hi
First get Pocketnav.exe
Now assign right Key to PocketNav by using SoftKeyAppletEx.cpl
SmartsKeys and Pocketnav should be running
done
Now when u press the key once you will get the pocketnav menu and you Can switch programs
And if u press the key for 2 Seconds the running Program will be closed as this is the default behaviour of smartskeys 0.52
I think i am able to explain it
Image to show how it works
no replies yet !
i think its very good to switch bw programs
In the cooked ROM I was running on my 8525 the PTT button was set so press and hold ran the notes app in recorder mode and recorded until I released the button.
It seems to be a fairly common feature that about every *other* smartphone I buy has... And all the older ones and PDAs had it on their dedicated record buttons.
I just got a Tilt and did the regedit so I can assign the PTT button, but how do I make a press and hold start recording and do it until released? I can't figure out what link (or otherwise) was being called on my 8525... The closest I came was finding a Record.lnk in Windows\AppButtons but that's not it, because the link is bad on both my 8525 and the Tilt...
Strangely the Tilt comes with a new HTC app called voice recorder, but I don't see any real point in it or way to make it record like I want.
Nothin'? I know people have figured it out because it was added back to the Black Majik WM6 Rom I used on my 8525...
Made it so easy to record a quick not about where I parked or something to check on at word...
Try using a third party program like ae button plus or a freeware program there are many out there
TheCritic said:
In the cooked ROM I was running on my 8525 the PTT button was set so press and hold ran the notes app in recorder mode and recorded until I released the button.
It seems to be a fairly common feature that about every *other* smartphone I buy has... And all the older ones and PDAs had it on their dedicated record buttons.
I just got a Tilt and did the regedit so I can assign the PTT button, but how do I make a press and hold start recording and do it until released? I can't figure out what link (or otherwise) was being called on my 8525... The closest I came was finding a Record.lnk in Windows\AppButtons but that's not it, because the link is bad on both my 8525 and the Tilt...
Strangely the Tilt comes with a new HTC app called voice recorder, but I don't see any real point in it or way to make it record like I want.
Click to expand...
Click to collapse
You might want to follow my articles (even past ones); in the Sound Recorrding Bible, I explained it's Notes that you must look for. In Settings / Buttons, it's denoted as "Record". Just assign it to any hardware button and you're set.
scousemartin said:
Try using a third party program like ae button plus or a freeware program there are many out there
Click to expand...
Click to collapse
Not needed - the basic OS supports this. Albeit, speaking of the button enhancers you've mentioned, you will want to read my latest Button Enhancer Bible.
Record isn't listed in the list of available programs to launch on a Press and Hold for button 6.
I can see it on my XV6700 assigned, but on the Tilt it isn't in the list ...
Proto732 said:
Record isn't listed in the list of available programs to launch on a Press and Hold for button 6.
I can see it on my XV6700 assigned, but on the Tilt it isn't in the list ...
Click to expand...
Click to collapse
Now I understand what you mean. I've upped Record.lnk for you to http://www.winmobiletech.com/sekalaiset/Record.lnk . Just put it in AppButtons and, if it can't be seen from Settings / Buttons, \Windows\Start Menu\Programs
Thanks for the assist.
I did have a Record.lnk in the AppsButtons folder, but the shortcut indicated it was pointed at a program called: HotVoice.
I copied your link to both locations and was then able to assign Record to Press & Hold for Button 6.
Thanks again.
Glad it worked
The strange thing is, the broken Record.lnk in Windows\AppButtons, is ALSO broken on my 8525 but the functionality still works there somehow...
Thanks for your help! It didn't work at first for me, especially just clicking on the link... but once it showed up in the recent items in the start menu it showed up in settings|buttons and I was able to assign it to button 6 (press and hold). WORKS LIKE A CHARM NOW Even still seems to work after deleting it from Start Menu | Programs!
It'd be great if somebody could make a cab for 8925/Tilts that strips PTT and makes button 6 work, fixes this file and makes comm manager the default for button 6 press and record the default for press and hold... do it for the newbies... I'm no newbie (Started w/ MPX200... R.I.H.) but it took me a while to get it right (and the last step was iffy).
THANKS AGAIN though!!
Menneisyys said:
Now I understand what you mean. I've upped Record.lnk for you to http://www.winmobiletech.com/sekalaiset/Record.lnk . Just put it in AppButtons and, if it can't be seen from Settings / Buttons, \Windows\Start Menu\Programs
Click to expand...
Click to collapse
I've tried this fix and have one question. After installing the link when I press and hold the button it opens notes not voice recorder. It works but it's opening the wrong app. Any way to fix this?
Has anyone come up with working solution for mapping hw keys?
I found this thread on Diamond, but no help:
http://forum.xda-developers.com/showthread.php?t=398280
I am using AEKMap to enable both latin/cyrillic input on my TP's hw keyboard. You may google it and give it a try.
There is no need for additional software, just follow this post and you'll get the answer. Worked for me.
Try AE Button Plus.
B.
I think you did not quite follow me here.
I dont mean to change layout of QWERTY, but hw-keys like "Back" and "Home" at front panel of TP.
This is becaus I find home and back quite useless and would much more prefer to have ALT+TAB (change program) and close program (REALLY close them, not leave running background as back seems to randomly do).
Taajuus said:
I think you did not quite follow me here.
I dont mean to change layout of QWERTY, but hw-keys like "Back" and "Home" at front panel of TP.
This is becaus I find home and back quite useless and would much more prefer to have ALT+TAB (change program) and close program (REALLY close them, not leave running background as back seems to randomly do).
Click to expand...
Click to collapse
And that is EXACTLY what i also want to know....
The total lack of hardware-keys on this device is already disturbing enough, but being locked out of the option to remap any of them is truely horrid...
Anyone know of any reg-hacks maybe?
I've got Spb PocketPlus 4 installed btw, and it's got a button mapping function as well...
But when i go into the buttons map, some weird black icons appear with no name attached to it. Can anyone make anything of this? As you can see i've been able to map one thing only: the Spb close-button-contex-menu, which allows me to switch task KW-buttons only....
But this is not enough for me, i need ALT-TAB aswell and off course a VoiceCommand button.
And regrettably the Rapael doesn't have that many HW keys to start with...
I want also to use Home/Back buttons for different purposes,but I didn;t found a solution yet.
Gotten a step closer to what i really need over this weekend:
In the button dialogue (with extra generated buttons by Spb PP+4) there was only one other button that had a name...
So i tried this one and go figure: it seems to be the " <= " (or 'back') button. In the dialogue it's called the OK button. I've got it set to the close contaxt menu now, and mapped Voicecommand to long-pressed answer key...
So far, this setup is to my satisfaction, and after two months of use this phone finaly behaves completely the way i want it to...
Hi, guys.
See my post here:
http://forum.xda-developers.com/showthread.php?p=2743845#post2743845
Hope this helps!
Cheers.
helped realy much !!! big thx for that nice instructions
You're very welcome, tk_berlin.
You be sure to let me know if anything in there doesn't make sense or you need any help with it.
Cheers from Canada!
ah cool to see a reply that fast ,)
hmm u got any further with finding out how to set the home button and the backwards button ?
Since the other htc user ,) wrote
In the button dialogue (with extra generated buttons by Spb PP+4) there was only one other button that had a name...
So i tried this one and go figure: it seems to be the " <= " (or 'back') button. In the dialogue it's called the OK button. I've got it set to the close contaxt menu now, and mapped Voicecommand to long-pressed answer key...
so it works with SPB PocketPlus ?
there must be a way to get it work wit the other tool
ah cool to see a reply that fast ,)
Click to expand...
Click to collapse
Lol. I was on my machine all morning and had XDA open in one of my tabs.
Yes, you can map practically any button in AEBPlus no problem.
hmm u got any further with finding out how to set the home button and the backwards button ?
Click to expand...
Click to collapse
AEBP will also *learn* any keys it doesn't have. So you could use the "Add Button" option, press your Home key, and away you go.
The way I have it set up, holding down the phone key will activate voice command (default behavior).
But remember, assigning commands to the Home or OK buttons (that "Back" button is actually an "OK" button) doesn't unmap what they normally do so you will always go home first and then it will perform <x>-function that you assign.
Personally, I don't like to program the Home or OK buttons because I find that they are "trickier" to press. What I mean is, if you tap the OK button near it's center or close to the left, it doesn't register a press. If you tap it sort of with the long part of your thumb (which is more natural when holding the device in one hand), it registers it. I've tried this with two TP's now and the button behaved the same way on both. Due to this, I find it unreliable to map anything to it.
In any case, as I mentioned earlier, the Volume buttons, Phone and End keys will be unmapped once you attach AEBP to them but the others will not.
Oh -- I forgot to mention, you can map the directional pad as well if that is your thing.
so it works with SPB PocketPlus ?
there must be a way to get it work wit the other tool
Click to expand...
Click to collapse
It does work, but it sends an OK command first.
I wrote a little utility for hard-coded buttons such as these for another Pocket PC I had (an ASUS P527) called "DoNothing.exe" but we can't apply that work-around here. What I would do is replace the EXEs of apps the hardware keys called with my DoNothing.exe, but in the case of the TP, we definitely don't want to replace START.EXE (which I believe to be the likely EXE (haven't tested this)).
If I find a way to map those buttons reliably, I will let you know, tk_Berlin. So far tho, I've been quite pleased with just using the four buttons I mentioned. The more I use this device and the more I ponder my decision to stay with TFL3D instead of the normal WM interface, the more I realize that I don't need half the add-ons I used to use prior to having TF3D. I am accustomed to very, very, very *heavily* customizing my device, but the setup I have now works great and I really haven't lost nething from my old WM world. In fact, prolly gained a few CPU cycles and memory to boot.
I don't miss the Today Screen at all!!! Now that I think about it, I never really looked at it.
Cya!
Hi. Suppose I just want to remap the long end key press button to something other than the HTC dafault. Do I need AEBPlus for that? I assume that would be a overkill for remapping just one button. The HTC interal app only allows to either display the quick list or make 4 other actions. I was wondering if I can change that to something else without using the AEBPlus app. I just wanted to run the comm manager rather than the htc options
Thanks
Don't get your hopes up about AE Button cause it don't work if your using touch gl. Apparently touch fl keeps regrabning the keys so sometimes they work snd sometimes they dont. I gave up. i think ot might work better with the hold button but like i said i got frustrated snd gaveup when thr suthor told mr there was nothing he could do..
craigwillie said:
Don't get your hopes up about AE Button cause it don't work if your using touch gl. Apparently touch fl keeps regrabning the keys so sometimes they work snd sometimes they dont. I gave up. i think ot might work better with the hold button but like i said i got frustrated snd gaveup when thr suthor told mr there was nothing he could do..
Click to expand...
Click to collapse
Actually I don't need it working with the TouchFlo, as I don't use TF. I only want to remap the long end press button to the comm manager. Of course it would have been great to also map a long press on the Home button or the Back button but I think I read that's not possible even without TouchFlo ?
what no one answered ? wow i thought that's easy,a metter of registry or link change. quite disappointing.
I am also looking for a way to change the back button to run some other program...
How to assign a shortcut to EndKey, SendKey ....
Not tried myself on TP, but maybe it's useful:
http://forum.xda-developers.com/showthread.php?t=356322
Create a shortcut in your windows directory called long_end.lnk
whatever the shortcut points to will run when you long press the end key.
There are a few of these hard press shortcuts
long_end.lnk
long_send.lnk
long_power.lnk
long_ptt.lnk
short_power.lnk
short_ptt.lnk
I can remap all the buttons except the Long End. Somehow the Long End button is mapped to the phone Lock. Where can I disable that and allow for my own?
Start, settings, system tab, long press end key
if you don't see what you want there ... we might have to figure out how to disable the long press htc software
I cooked my own rom and I didn't put in long press end key. I assumed it wouldn't have installed any reg settings for it, guess I'll have to check. Thanks!
For some reason if you don't add HTC Long End to the ROM, it will stick on one setting and can't be changed. Weird, but fixable. If you install HTC End Key (the cab is somewhere on here) it will override the previous setting and then you can either select your preference from within the program or create a custom link. Not sure about the second idea working, since I haven't tried it myself, but I've been able to override HTC End Key when it was installed on previous phones. You could also consider un-installing it after installing it if all else fails.
baub said:
For some reason if you don't add HTC Long End to the ROM, it will stick on one setting and can't be changed. Weird, but fixable. If you install HTC End Key (the cab is somewhere on here) it will override the previous setting and then you can either select your preference from within the program or create a custom link. Not sure about the second idea working, since I haven't tried it myself, but I've been able to override HTC End Key when it was installed on previous phones. You could also consider un-installing it after installing it if all else fails.
Click to expand...
Click to collapse
Yeah, I recooked the Long End Key Press in, but there isn't a custom selection part of it so that must be a different version of End Key software. It's ok not too important.
AEB
Just for those who wonder, AEButton can remap everything (single, double, triple, long presses) on all keys except two: Long Green and Long Red.
You either need to disable Long End Key software or find some other way to hard map these.
Using my HTC Touch Pro. I am still unablet to map the Long press End Key to something other than the limited options that the HTC Long Press End Key program settings offer.
I simply wish to map the long press end key to run a different program. I tried the suggestion offered on this post (http://forum.xda-developers.com/showthread.php?p=1783616#post1783616) but it doesn't work. I put a file called Long_End.lnk in the windows directory, soft reset the device and still it doesn't map to that. Only displays the HTC 'quick list'.
I am not running TF3D.
Anyhelp ? To map to any program I choose ?
Thanks
So no buddy managed to map the End button long press to some other program than the options that the HTC's prg in the settings allow ?
I want to remap the End key to open Phone Weaver Profiles which is much more useful than what the HTC Long End Pressapp offers.
nik3r said:
Just for those who wonder, AEButton can remap everything (single, double, triple, long presses) on all keys except two: Long Green and Long Red.
You either need to disable Long End Key software or find some other way to hard map these.
Click to expand...
Click to collapse
That's not the full story ....
on ex: HTC HD
there are buttons:
"Green Key", -> mapping possible but without Long Press
"Home Key" -> nothing possible !!!
"Back Key" -> not really mapable (mapping possible, but always send to wanted mapping ~backspace and jump back to Homescreen and then the mapped button will execute - little bit strange ..)
Longpress also doesn't work
"Red Key", -> mapping possible but without Long Press
tried with aebutton also (last version)
some additional ideas ?
cu camel
Proto732 said:
Start, settings, system tab, long press end key
if you don't see what you want there ... we might have to figure out how to disable the long press htc software
Click to expand...
Click to collapse
HI!
I'm another one that tried everything to remap the long end key without that HTC app and no solutions.
What we really need is to know how to disable that app from the system.
Anyone help us!
I'm a new user of Topaz.
Could anyone know that, is it possible to use the application like SKtools of AEbutton Plus to map the mentioned programme as left and right soft button ??
I was tried to do that, but it doesn't work so far
I use the facility in "TouchFlo Detacher" to remap the left and right soft buttons. The left one now puts my TD2 into standby, and the right goes straight to HTC's comm manager console ("\windows\CommManager.exe"). It works perfectly.
ricohoho said:
I'm a new user of Topaz.
Could anyone know that, is it possible to use the application like SKtools of AEbutton Plus to map the mentioned programme as left and right soft button ??
I was tried to do that, but it doesn't work so far
Click to expand...
Click to collapse
here is display switch. its a link to dysplay off and u can assign with avanced config to any soft key. i made it to work if u press twice. just copy in a new folder in programs files.