contacts no working after flashing - JAMin, XDA Neo, S200 Software Upgrading

Hi, this is my first message. First i want to congrat the xda-dev team for the amazing fora
My problem...
I have a Qtek s200 G3 and want to update it to wm6. I have read the forum about the process, the roms, etc... and the update always goes to nice end.. a wm6 running on my qtek.. but the problem shows up when i try to use the contacts.
I open the contacts and only in 1 second the system close it, I cannot introduce a new one, I cannot do anything. This happens with fatastic mobiz 2.04b with PocketCm contacts installed as a cab. I thought it was a rom failure, but surprinsingly I installed another rom, trueneytral 1.4 and the same happens (this time without PocketCM)...
It seems I cant use the contacts... but why?
Best Regards
3lr0n

Hard Reset
3lr0n said:
Hi, this is my first message. First i want to congrat the xda-dev team for the amazing fora
My problem...
I have a Qtek s200 G3 and want to update it to wm6. I have read the forum about the process, the roms, etc... and the update always goes to nice end.. a wm6 running on my qtek.. but the problem shows up when i try to use the contacts.
I open the contacts and only in 1 second the system close it, I cannot introduce a new one, I cannot do anything. This happens with fatastic mobiz 2.04b with PocketCm contacts installed as a cab. I thought it was a rom failure, but surprinsingly I installed another rom, trueneytral 1.4 and the same happens (this time without PocketCM)...
It seems I cant use the contacts... but why?
Best Regards
3lr0n
Click to expand...
Click to collapse
seems u have not done a proper hard set. the correct wayto do a hard reset is keeping the camera and comms buttons dipressed insert stylus into the hole next to the usb slot for a second or two. then remove the stylus butkeep the comms and camera buttons dipressed until u see a message on screen. then u may press the call buttom.

I think I have done it properly. I pressed both bottoms, insert the stylus and then remove the stylus holding the buttoms pressed.
Then a message show up telling me to press "send" to restore factory defaults or other key to quit..
I dont press "send" (that might be call button?) and press another to enter.. then the wm6 starts loading..
I have to say that all works fine, only the contacts..
any other ideas?, do I have to select restore factory defaults?
Best Regards
3lr0n

then u may press the call buttom.
Click to expand...
Click to collapse
Bingo!
That was... re flashed and now working with my contacts
Thks

Yes thanks for your info here...i just did it......

reflash?
3lr0n said:
Bingo!
That was... re flashed and now working with my contacts
Thks
Click to expand...
Click to collapse
hi
what you mean the reflashing? Reflash extend rom or reflash temp rom or both?
thanks...

alva_edison said:
hi
what you mean the reflashing? Reflash extend rom or reflash temp rom or both?
thanks...
Click to expand...
Click to collapse
You don't have to reflash when this is your only problem, just do a Hard Reset, but in a proper way. Method 2 to do so is "Settings=>System=>Clear Storage=>1234=>YES".

Related

5 seconds no sound when answering the phone after flashing Andot's WM6 Perfect rom

I followed karhoe's Step-by-step pictorial guide to upgrade to Windows Mobile 6, and installed "Andot's V6 Perfect English Edition Windows Mobile 6 for HTC Tornado" with success on my Qtek 8300 phone (SP5M).
Everything works perfect except for one important thing.
When someone is calling me and I pick up the phone it takes 5-6 seconds before I can here anything. It is just completely silent before that.
Is there a solution to this problem? I have browsing through the threads but didn't find an answer.
Are you using any phone recorder softwaere in the background?
Did you update the radio?
Lastly, did you reboot your phone ?
Try to perform a hard reset if all fails
I was not using any recording software in the background.
I didn't understand what you meant with "updating the radio"...
and I rebooted the phone a couple of times.
I did a complete hard reset and the problems seem to be away.
I can't tell where they came from.
perhaps from one of these program's I had installed before:
HTC Audio Manager.cab
HTC Comman IR+WIFI+VOIP.cab
which I didn't install this time.
Thanks for the help
Try this, right after flashing, try to make a call
karhoe said:
Try this, right after flashing, try to make a call
Click to expand...
Click to collapse
As I said, the phone is working fine after the hard reset.
Thank you for your help.

Cooked my first rom but my Kaiser fails to reboot afterwards

I've cooked my first Rom using Alex's tutorial but upon installing it, both times the device tries to auto-reboot, it fails, just stopping at a blank screen. I can reset my phone and it continues just fine. I did a quick search but don't see anything. Anyone have any ideas?
JoeWilcox said:
I've cooked my first Rom using Alex's tutorial but upon installing it, both times the device tries to auto-reboot, it fails, just stopping at a blank screen. I can reset my phone and it continues just fine. I did a quick search but don't see anything. Anyone have any ideas?
Click to expand...
Click to collapse
bad tasting food man go back to cooking class lol
JoeWilcox said:
I've cooked my first Rom using Alex's tutorial but upon installing it, both times the device tries to auto-reboot, it fails, just stopping at a blank screen. I can reset my phone and it continues just fine. I did a quick search but don't see anything. Anyone have any ideas?
Click to expand...
Click to collapse
Edit: Sorry, misread the first time and answered a completely different question....
Which base ROM are you using? Some of the 6.1 ROM's don't auto reset after customisation, or is it stopping at some other point?
JoeWilcox said:
I've cooked my first Rom using Alex's tutorial but upon installing it, both times the device tries to auto-reboot, it fails, just stopping at a blank screen. I can reset my phone and it continues just fine. I did a quick search but don't see anything. Anyone have any ideas?
Click to expand...
Click to collapse
Could be radio related. Had the problem once
It's based on Alex.v5.WM61.HTC.3.03. I was following his tutorial though I did change the apps that are added. It died twice. Once after the initial setup when it wanted to reboot, and once after install my provider settings.
Another question I have is how do I get Ervius Package Creator to remember which packages I've added to a rom? I tried exporting the rom I just cooked but it didn't seem to help.
JoeWilcox said:
It's based on Alex.v5.WM61.HTC.3.03. I was following his tutorial though I did change the apps that are added. It died twice. Once after the initial setup when it wanted to reboot, and once after install my provider settings.
Another question I have is how do I get Ervius Package Creator to remember which packages I've added to a rom? I tried exporting the rom I just cooked but it didn't seem to help.
Click to expand...
Click to collapse
3.03 is *KNOWN* to have the soft-reboot freezing problem. I have not corrected any problems that were inherent to the ROM when releasing them as ROM folders.

Camera cannot initialize - tilt phone

i upgraded to duttys rom w/cube packge. Works great. one little issue though. The camera wont initialize. is there a cab file i can run to reset it without haveing to reload the entire thing? any suggestion would be helpful thx
Did you hard reset? Did you think that someone in the "pertaining" rom thread might be able to answer your question? Do you have a compatible radio? Lots of choices.
.......Sigh......
get a right radio 1.65.x.x or 1.27.14.09
camera wont initialize
rom version is 1.65.14.06, how do i hard reset? i dont want to lose everything
kenyakd said:
i dont want to lose everything
Click to expand...
Click to collapse
Then you cannot hard reset... But you must!

HTC TOUCH VIVA OPAL Camera is not working

I did buy HTC Touch Viva 2 months before, install some 3rd party software and that also working file, one day i found if i start camera it take 1 min to open and after few days it's stop working. i'f i click the camera nothing happen. i did uninstall all the 3rd party application. but still same problem. then get some solution to replace the windows/camera.exe file!
i download that from some site but problem is that system did not give me permission to replace that camera.exe file in windows directory.
please help me to solve this issue!
i am facing a similar prob....
Did u get any solution?
Same problem
I am also facing the same problem please help
You can use the Factory setting, that will reinstall your HTC Windows. Start>Setting>System>Clear Storage (password 1234). remember take a copy of your mobile contact. bcaz it will remove all of your old setting.
Best of luck!
I tried every thing nothing works i tried hard reset soft reset nothing is working please help.
I tried to replace camera.exe.0409.mui but unable to replace
please help
urgent,
I dont know what to do, how to fix this problem and to which file this problem this is associated
have you tried updating it with a newer rom?
if it still persist, it's probably an hardware problem that only the HTC service center can repair.
what is ROM and how to update it?????
only rom available on HTC site is arabic
will my language changes into arabic after updating the rom???
my camera is not working since 3 months
i tried every thing soft and hard reset but nothing is working.
please help me
i tried to execute camera.exe file in windows folder but nothing happens.
now what should i do??
i tried to replace camera.exe.0409.mui but unable to as it is write protected
please help
is there any way by which i can fix this problem???
Senior members please help this junior member
TheRem said:
if it still persist, it's probably an hardware problem that only the HTC service center can repair.
Click to expand...
Click to collapse
...................
You can use the Factory setting, that will reinstall your HTC Windows. Start>Setting>System>Clear Storage (password 1234). remember take a copy of your mobile contact. bcaz it will remove all of your old setting.
try this... hope it will be ok!
Camera problem
tried all stuffs...
Soft Reset.. hard Reset.. still camera not working
Sometimes back, i tried removing the sd card and it worked like a charm.
Now its all gone.
I doubt one software which cud have possible disabled my camera.
The app is HTC radio. after installing that i got lots of problem.. even after uninstallation i am having problems.
Please help me how to fully remove files that support the HTC radio which i downloaded from XDA only
I Have this problem too!!!!

[Q] Auto Hidden menu -G2X (P999)

I'm a newbie in real trouble ....hopefully not by making a new thread on XDA.
If I 'm violating rules pl delete this.
I m with my G2X.I have stock 2.3.3 OTA rom.nandroid ,CWM ,Baseband July 2011 ,
Whenever I press "0" or "#" on my dialer it automatically goes to hidden menu.This cannot be undone even when i wipe factory data,clear cache,clear delvic cache,or by flashing a new rom(stock froyo or gb)..etc.
This problem makes number dialing impossible
Only way is to flash CM 7.then it doesn't come.
How can i undone this auto hidden menu from coming.
Thanks in advance
You answered your own question; **** LG/2.3.3 based ROMs, use CM based ROMs.
IRASadPanda said:
You answered your own question; **** LG/2.3.3 based ROMs, use CM based ROMs.
Click to expand...
Click to collapse
Thanks for the reply.
I too agree CM7 the best.
unfortunately in CM7(stable and nightly 222) the APN get deleted automatically.
Tried APN backup and restore app,Fixing permissions,.....nothing works so far....
BTW when I bought this GTX and upgraded to 2.3.3. the hidden menu didn't automatically come.Since few weeks only this bug....
Any idea even to cure CM7 problem even......
reset the phone to see the bug go away.
Longevite said:
reset the phone to see the bug go away.
Click to expand...
Click to collapse
Did factory rest,cleared cache,clears delvik cache.....nothing happens....still the hidden menu comes.....
No idea how to get rid of it.....at least if CM 7 doesn't delete my APN i could have stick with it.....
I have this trouble too. Please help us.
GO Contacts
How about using GO Dialer from the market? Is their keyboard has the same issue?
You said you got clockwork mod... factory reset... clear delvic cache n cache... how about formatting system???
Sent from my LG-P999 using xda premium
i can't Press 0 and # on keypad on LG Ku5900
i can't Press 0 and # on keypad on LG Ku5900
please help me fix it
http://forum.xda-developers.com/showthread.php?p=22862921#post22862921
the same here , i think it started after i upgraded to 2.3.4 that was released a few weeks ago, i had to upgrade using the LG official flasher , its a must to upgrade the baseband , its really annoying ,
im almost sure there is some secret code to dial that will disable this menu , that is enabled some how
at last , i fixed it , this time i took a little more time to think of the matter and i came to a conclusion , this matter happens due to some thing happened in the part of the FW that doenst get touched when flashing or wiping the rom , so reflashing the rom didnt fix it , first thing i did i made a backup of every thing using the custom recovery , then i went into the menu (the secret menu that keeps poping up) i got into it by pressing # which always happens to bring up that secret menu , after that i did a factory reset which is found in that menu , not the one you get into it from the settings icon , it took some time to reset , a lot longer than i thought it might take , just leave it alone till it restarts , after that you will find your self in the initial screen , like the one when you flash a new rom , just skip every thing and go directly to your dialer and press # or 0 and see for your self that its fixed at last , no secret menu any more , just a normal 0 or # , now you can do a full restore from the recovery menu using your backup , dont worry , after restoring every thing the problem wont come back ,
good luck every body
i cant understand this step i do it but not work pls help
Ahmed.gogo said:
i cant understand this step i do it but not work pls help
Click to expand...
Click to collapse
just do a factory reset using the factory reset option you find inside the secret menu , not the one you usually use by going into settings >privacy
this will reset every thing , i mean really every thing , and it will go back to normal
you can do a full backup and after finishing the reset do a restore , yes thats right , this will not bring back the problem again
I appreciate all the great work
luyi84 said:
I appreciate all the great work
Click to expand...
Click to collapse
you are most welcome

Categories

Resources