Database Info

Upgrading to bigstorage for the first time

When uograding to bigstorage for the first time the process can look daunting but fear not, even if, as mine did, it doesnt go as per the screen shots / directions it may still work. Mine did and with the following installed here is what i have ended up with.
SPV M500 / Magician with bigstorage
running are
intellidialier, voice id (extra from extended rom)
Installed are : --
Tomtom 5, Calligrapher, pocket breeze, pocket contact, avantgo, pocket music, and several other small aps not worth mentioning.
I the process went ok using my 1gb card until: ---
As the how-to says the rom size created relfects the size of your card so the rom i was working with was 1gb, I could not use the recommended hex editor with that file due to system resources, let me tell you when you are that far into the process and you cant open the rom it is very annoying. Thankfully there are several other hex editors out there that let you load files up to 4gb allowing for resources but unfortuntely neither my old xp laptop nor my media centre could still open it. I ended up using my powerbook G4 with HexEdit 1.1 which loaded the rom just fine for editing. All the rest went OK until the end of the flsh back to the phone where i got a failed message, after a soft reset it booted into the new rom with no problem.
I have to stress to you guys thinking about trying this, it IS worth it. I am so pleased with the results. After updating and setting up BT Activesync, mms, pop3 etc and with all aps running I have the following: -
Allocated 17.7MB Allocated: 29.70 MB
to use: 11.16MB to use : 14.75MB
Free: 6.55MB Free: 24.95MB
And that is in a running state with no restrictions.
Well done to the community for such good documentation and their desire to share information and allow us newbies to get the most out of these wonderful units.

Hello,
I hope I dont sound like an idiot, but what is a big storage rom?
I have heard it mentioned quite a few times in the forum. I have a Krome Spy ( analog of M500) from australia.
Thanks.
rohseq

Nice to know that you were successful in upgrading to BigStorage. I've done it since the very beginning. My next step would be "nonentity's" File System Tweak.
@rohsek: please search this forum and you will find the answers you need.

rohseq said:
Hello,
I hope I dont sound like an idiot, but what is a big storage rom?
I have heard it mentioned quite a few times in the forum. I have a Krome Spy ( analog of M500) from australia.
Thanks.
rohseq
Click to expand...
Click to collapse
With BIG Storage you convert your EXT-rom with operator brandings into extra internal Storage. You actually append about 20MB to the default 7MB Storage folder. Very nice hack.
Regards, M

COuld somebody tell me where I can find the HOW-TO described above??
Aren't there any standard ROMs?? It seems to me that when someone creates a specific ROM for a specific model, this ROM can be used in multiple devices or am I making you :lol: ROFLYAO :lol: by asking this question??
I've also got an Orange SPV M500 (with a huge memory shortage )...
Could someone please help me out??
Thanks in advance!!
Kind regards,
Maarten

Hi Maarten,
Still in English: visit this link for a complete description http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade. For an already patched nk.nbf you can download this one ftp://xda:[email protected]_NK.nbf/BIG_Storage_nk_for_rom_1.13WWE.zip
Success, M

OEM's for Kitchens

Ive had a request from Leo to make a folder for OEM's so I've created the following:
http://vidmes.com/Uni/Kitchens/OEMs
You can upload from there using the following credentials:
Username: [email protected]
Password: oemupload
Address: ftp.vidmes.com
NB: My server only allows connections WITH USERNAMES, so make sure to use an FTP program
NB: This is for OEM PACKAGES ONLY. If you want a program (ie .cab or .exe) uploaded, contact me
CONVENTIONS
Files are to be named "[company] appname versionnum.rar" (eg "ArcSoft MMSComposer 3.5.1.4.rar" OR "MMSComposer 3.5.1.4.rar" OR "Grisoft TotalCommander 1.5.rar") - Try to keep naming the same, if you're uploading a different version of whatever is already there, use the same naming....
Readmes are to be named "[company] appname.txt" (eg "ArcSoft MMSComposer.txt" or "Grisoft TotalCommander.txt")
RAR or Zip files only. With plain-text files for readme's
Folders are permitted, but discouraged. Please just dump everything in the main folder. If it gets crowded, I'll see about folders. But, if everyone follows the conventions, it should stay neat.
Warez\cracks\serials are NOT permitted. I will remove any offending material.
And a final note: If this privilege is abused, I will remove the FTP user, and we'll go back to everyone having to PM me
Turning an OEM package into a CAB
Check out these guys: http://www.ocpsoftware.com/ they make a piece of Software called "WinCE Cab Manager" that allows you to do it. I'm not sure if its free or how easy it is to use - but there is no harm trying!

OEM for the kitchen
Thank you my friend.
Leo

Rock on!
Thanks!
Time for guidelines on structure of OEMs and the ftp folders?
Include readme's with what info?
Naming conventions? (version and enough to know what it is?)
What can't be added (serials, warez?)
Use of folders?
Rar or zip?
(sorry, just trying to keep it quality) ,)

I've uploaded the OEM's from Helmi, they should work in the new Kitchen, too.
Shall I upload some OEM's from other devices, too?
Max

grayme said:
Thanks!
Time for guidelines on structure of OEMs and the ftp folders?
Include readme's with what info?
Naming conventions? (version and enough to know what it is?)
What can't be added (serials, warez?)
Use of folders?
Rar or zip?
(sorry, just trying to keep it quality) ,)
Click to expand...
Click to collapse
Guidelines and conventions added to the first post. PLEASE READ BEFORE YOU UPLOAD!!
And one other thing: Donations Welcome - hosting ain't cheap!

GREAT contribution from TehPenguin. thank you.
From what I remember, OEM are slightly different depending on the kitchen you use.
I think that at least are two different. People more involved could confirm this.
I would propose to create folders for the different version of Kitchen/OEM.
It would make everyones work/search easier.
Cheers

ultravox said:
GREAT contribution from TehPenguin. thank you.
From what I remember, OEM are slightly different depending on the kitchen you use.
I think that at least are two different. People more involved could confirm this.
I would propose to create folders for the different version of Kitchen/OEM.
It would make everyones work/search easier.
Cheers
Click to expand...
Click to collapse
All seems fair there Pengiun .
The two versions of the OEMs differ in that the entry into initflashfiles to move across the shortcuts to the start menu in the first one went into the initflashfiles in the individual OEM folder on the original Helmi kitchen, but into the single initflashfiles in OEM_Language_0409 (from memory?).
Seeing as how this is for the new kitchen (?), the entry into the single initflashfiles could just go in the readme?
My problem with the old OEMs is that there appeared to be a lot that didn't work, can we only add tested OEMs here to keep it tidy and useful?

I'm just providing the space - so dont ask me too many questions
Personally I believe people should put up what they can, and chuck in the readme's as much information as they can.
If the OEM's need customisations, post them on this thread or in the thread of the relevant Kitchen
If you need to ask questions, direct them to the Kitchen maintainers (eg Leo and Ranju) or the ROM developers (eg Ivan, Midget, JWright, MWang, etc)

grayme said:
Seeing as how this is for the new kitchen (?), the entry into the single initflashfiles could just go in the readme?
Click to expand...
Click to collapse
I dind't check it yet, so I can't help.
grayme said:
My problem with the old OEMs is that there appeared to be a lot that didn't work, can we only add tested OEMs here to keep it tidy and useful?
Click to expand...
Click to collapse
I would dare to say that this point must be mandatory, maybe even more: only 2 or 3 users (Leo, grayme and Ranju) or the ROM developers should be able to add the OEM to the main folder; everyone else, should have a "test" folder. We take the risk to have a big mess wihout knowing what to pick.
The readme file is a good idea to place all the info needed to work with the OEM.

Hi Ultravox,
Think that building ROM's and building OEM's is always a mather of thrust and a bit experimenting (see if it works).
A OEM needs a 'dsm' and a 'rgu' and sometimes you need to tell initflashfiles.dat where to place the files.
Before I will use a OEM I should always have a look first at the 'rgu' a/o the initflashfiles.txt, if initflashfiles.txt excist I modify initflashfiles.dat.
The only thing that is necassary for the OEM is the initflashfiles.txt (if the OEM needs it offcourse!), if you don't know where to place the files the whole OEM won't work and you need to rebuild.
Cheers,
Leo
ultravox said:
I dind't check it yet, so I can't help.
I would dare to say that this point must be mandatory, maybe even more: only 2 or 3 users (Leo, grayme and Ranju) or the ROM developers should be able to add the OEM to the main folder; everyone else, should have a "test" folder. We take the risk to have a big mess wihout knowing what to pick.
The readme file is a good idea to place all the info needed to work with the OEM.
Click to expand...
Click to collapse

ultravox said:
I dind't check it yet, so I can't help.
Click to expand...
Click to collapse
It wasn't really a question

Here'yar!
I've added a few files to start off with:
Ghisler Total Commander 2_UPX - freeware 150k
Gábor Kovács Tcpmp 0.72 - freeware 629k
Mort's MortPlayer 3.31RC6 - freeware 741k
SKKV SKTools3.1.3 - very usable demo 473k
vijay555 Hide_Bottom_Bar - homebrew/freeware 11k
I named the readme's 'readme' as that seemed easiest to find them

grayme said:
I've added a few files to start off with:
Ghisler Total Commander 2_UPX - freeware 150k
Gábor Kovács Tcpmp 0.72 - freeware 629k
Mort's MortPlayer 3.31RC6 - freeware 741k
SKKV SKTools3.1.3 - very usable demo 473k
vijay555 Hide_Bottom_Bar - homebrew/freeware 11k
I named the readme's 'readme' as that seemed easiest to find them
Click to expand...
Click to collapse
Thx. Good collection!

ultravox said:
only 2 or 3 users (Leo, grayme and Ranju) or the ROM developers should be able to add the OEM to the main folder; everyone else, should have a "test" folder.
Click to expand...
Click to collapse
Most of the Kitchen\ROM developers already have their own FTP account and can access their parts of my FTP
This "OEM" folder is the only "public" upload space I have

Adobe Reader LE
Hi all,
Somebody has got Adobe reader LE OEM already builded?
Or maybe the cab so I can build myself?
Would be great !!!
One more question, why is this thread not sticky?
Would be great as well !!!
Leo

Nobody has added any OEMs to the five I put there first time round.

OEMs
Maybe nobody noticed this thread because it's not sticky!
Greetings Leo
grayme;1314261 said:
Nobody has added any OEMs to the five I put there first time round.
Click to expand...
Click to collapse

Laurentius26 said:
Hi all,
Somebody has got Adobe reader LE OEM already builded?
Or maybe the cab so I can build myself?
Would be great !!!
One more question, why is this thread not sticky?
Would be great as well !!!
Leo
Click to expand...
Click to collapse
Here you go Leo, Official for WM5; http://adobe-acrobat-reader-ppc.en.softonic.com/pocket but im afraid it is not cab.file

Adobe
Hi SteedMo,
Thanks, stupid I didn't think about that. After installing with active sync you can find the cab in Windows\Active sync, if you didn't know that already?
Cheers, Leo
SteedMo;1314833 said:
Here you go Leo, Official for WM5; http://adobe -acrobat-reader-ppc.en...url] but im afraid it is not cab.file[/QUOTE]
Click to expand...
Click to collapse

Laurentius26 said:
Hi SteedMo,
Thanks, stupid I didn't think about that. After installing with active sync you can find the cab in Windows\Active sync, if you didn't know that already?
Cheers, Leo
Click to expand...
Click to collapse
Geeeez, didnt know that b4... in fact I've been spending time looking up softwares for cab.converter
Thanks for that..

I JUST WANTED TO SAY THANKS!!! For the WM6 ROM.

The latest ROM "wm6-for-tornado-perfect-english-edition-20070810" which can be found at CoolCode(click me) is Flawless!!!
All I had to do is add-on the "WM6GSMUPDATE" and the "t9 English". After that it was basically all about setting Reg to put Pocket IE and Email in Storage Card and Install all the apps I wanted.
You guys did a AMAZING JOB and I wanted to create a new thread so it gets attention. Thanks alot.
My SDA which I had running on the lastest ImateSP5m ROM actually runs MUCH smoother and less buggy.
And also Thanks alot to whoever is responsible for creating the "Extras" Zip file. The "SP5 keys" cab came in handy since I have SDA. Many other Cab came in handy too.
And thanks to the guy who created posted the T9 text cab (same as Imate ROM).
I will be donating to this site & to you guys.

Hi
thanx for the thanx.lol
i'm looking into releasing a newer build of wm6 for the tornado pretty soon so get ready for an even better build!

duke_stix said:
i'm looking into releasing a newer build of wm6 for the tornado pretty soon so get ready for an even better build!
Click to expand...
Click to collapse
Hum very good news Thx for all job and all cookers.

I also want to thank all the contributers. With Phil's Alpha we could see the light. I was planning to replace my SP5 and I started liking it again. With Andot's release most bugs were solved and many improvements were made. And now you are talking (duke_stix) about never build which seems fantastic already. Thanks again to all for the good job.

Go and spam andot's site Google ads link, you can contribute abit, have been spamming his ads on each visit, whenever there is a new build

I want to thanks to Andot, very very much !!! :x :x :x

@duke_stix - I had a go at porting the Vox XIP the other day, can't say it was wholly successful, phone froze on the splashscreen but at least it didnt go straight to the bootloader, means theres some hope of porting it
Phil

jm012a9749 said:
@duke_stix - I had a go at porting the Vox XIP the other day, can't say it was wholly successful, phone froze on the splashscreen but at least it didnt go straight to the bootloader, means theres some hope of porting it
Phil
Click to expand...
Click to collapse
very good news a new episode starts

really the best rom i've trayed on wm mobile device, i've also the s710 but this is the great work forever
thanks from italy......
You're the 1°

wm6 4 Magician it is not a dream

sorry for my bad english
i am a prof C++ programer
i know it sounds crazy but with the computer and programing there is no crazy
i just want a perfect rom for the Magician
why we are looking to the wm6 we want any good rom
we got the program
windows mobile 2003 rom editor
we got the rom on club i-mate
we got the cab of all good and great programs
we got one silly prob.
the passcode to edit the rom file
if i get it
give me 30 day to lunch the perfect rom
i think with the united we can make the WM Magician
the russin gays did it and they give us the txx rom right i think we can do it too

So, if i understand you correct your plan is to create a wm6 rom for the magician, right? This would be really cool...
P.S.
kingt0t said:
the russin gays did it and they give us the txx rom right i think we can do it too
Click to expand...
Click to collapse
i think you mean "guys" when you say "gays"
good luck with your project!

Kingt0t, what you want to do ain't something that hasn't been thought before...yes, you can do a WM6 for magician (hell, you can invent a new OS if you wish...lol) The thing is...time.
There's no drivers for the magician hardware built inside any WM6 ROM...(well, not entirely true - there's probable a few WM 5/6 ROMs which might have a few drivers for our hardware - but not all that are required so to make a workable magician ROM).
You probably would need to create drivers for all missing/required magician hardware...oh and above all...you probably would need to create a special/new bootloader because it seems to me that since WM5, the bootloader has changed it's way of loading the Windows Mobile OSes... (They use what is now called IPL/SPL...)
I'm not trying to discourage you...it's just that we (xda community) have heard about so many people with the same thoughts, giving up after realizing the enormous amount of work that would be required so to build a working wm6 magician ROM
Anyway, if you're really into it, then start by studying what hardware the magician has and how it works...
I can give you a few ideias right now:
- The CPU (PXA272) uses what is called a strataflash (It is glued to the cpu), which i believe there's not many models with this concept(if any). Most of them uses what is called DOC (Disk On Chip).
(if this ain't true, please someone correct me if i'm wrong)
- IDK if there's a driver for this CPU model in any other PPC with WM5/WM6...
- You will probably need to disassemble alot of dlls / .sys / Etc, so to figure out the functions names; what do they do; how do they interact with the rest of the OS...etc...
- Last but not the least, you would need to strip out alot of stuff since the magician only has 64Mb ROM or you could study how HARET (for linux) works and how it allows us to boot a SD Card partition image...
oh well...start posting away if you need help...for shure some gurus in here will start dropping you ideias, concepts, tests that were already made...
Best Regards,
Keeper
P.S: honestely, if someday microsoft decides to release the source code for WM2003 (like they did for win9x and windows 2000), then maybe, just maybe, we will be able to compile a modified version with some parts of the WM 5/6/xxx...

Maybe this is a good start, at least for WM5?
Ubiquio 401 has the same PXA272 CPU and 64MB ROM as the Magician, but it comes with WM5. Perhaps the IPL/SPL and CPU drivers that come with the FW will make less work for some smart person to make a custom Magician ROM.
Here is the Ubiquio 401 ROM, maybe somebody can extract some useful stuff from it:
ubiquio-401-v1.12.26.rar
I think it's also the same as the Gigabyte g-Smart i. g-Smart i uses WM5 AKU2. I don't know which AKU the Ubiquio uses.

Gnat,
There's one big issue in all this... When someone wants to seriously mess around with an operating system and it's "BIOS" (aka booloader) having direct access to the hardware is a must. Since we don't know the JTAG test point pins for the magician and knowing that no one is willing to trash their magician so that we can find out where they are located on the magician's PCB, (which would allow us to test various bootloaders + roms, without the risk of loosing our magicians), i doubt that anyone in here is willing to do blind tests with different model ROMs / Cooked roms, without some sort of backup like this one.
Check the last pages of this thread so to see what i'm talking about...(hell, check all this thread so to see what can happen when you flash something and there's a problem with it or along the installation of it...) : http://forum.xda-developers.com/showthread.php?t=319354
So, if you're willing to do this ( http://wiki.xda-developers.com/index.php?pagename=WallabyJTAG )...or know someone that is, then we might be able to start doing something... :-|
If we had JTAG access, we could start using the Windows CE 5.0 Evaluation Kit which would allow us to communicate directly to the hardware via JTAG and test cooked bootloaders and ROMs. (check this link for more info: http://msdn2.microsoft.com/en-us/library/aa447041.aspx )
Keeper

hope this dream come true....WM6 or just WM5 for IMATE JAM

kingt0t said:
sorry for my bad english
i am a prof C++ programer
i know it sounds crazy but with the computer and programing there is no crazy
i just want a perfect rom for the Magician
why we are looking to the wm6 we want any good rom
we got the program
windows mobile 2003 rom editor
we got the rom on club i-mate
we got the cab of all good and great programs
we got one silly prob.
the passcode to edit the rom file
if i get it
give me 30 day to lunch the perfect rom
i think with the united we can make the WM Magician
the russin gays did it and they give us the txx rom right i think we can do it too
Click to expand...
Click to collapse
if you do this, many will make a donation for your hard work...a NEW WM5 or WM6 ROM FOR the MAGICIAN.

Wow, that's a lot of work to find JTAG points. I have even more respect for people like Helmi if he had to find JTAG points for every device he has made a WM5 and WM6 for!
I don't think I will be finding the JTAG points on my Magician - I don't want to kill it! However, if anyone has a dead, fried or water damaged Magician, I will gladly pull the BGA off and trace the JTAG points.
If the JTAG points have a specific "signature" when viewed on an oscilloscope, I would be happy to trace them that way since I do have a 100MHz DSO available.

i hope too, this dream to ours magician

Oh btw...the taxist russian guy which released the 2.01~3TX rom did NOT made a WM6 for the magician - He simply opened up a magician ROM, changed a few icons, sounds, apps and packed it again...the Operating system still is WM2003se.
if you guys want to try and mod your own roms, use the following tools: alpinenbfdecode.pl, splitrom.pl and dumprom. They are available at the itsme website. ( http://www.xs4all.nl/~itsme/projects/xda/ )
Anyway, check this thread...there's a small script on how to re-create the XIP structure: http://4pda.ru/forum/index.php?showtopic=3924&st=1020#entry744997
Once again, this ain't gonna change your OS (there's no WM5/6 IPL/SPL for the magician) - it will only allow you to mod a few things... :-(
Keeper

Zoneaone
It very fantastic for your effort. thanks.

are you still there kingT0T?

ok guys hold on you are not making it easy i think it is mush simpler then you think
we need wm6 for jam
we dont have to edit wm6 to make it work on jam
we can upgrade the wm2003se to be wm6\5
we can find upgrads and some great programs to creat a wm2003se rom "main platform" looks like the wm6 and include some services in it like the voice command and renew the dailer and add some upgrades i think this is mush better coz we will not play with fire we can just try to make the perfect choise in 2003 rom with some upgrades and patches right

okey kingt0t...so what you want to do is something like taxist did...a modded ROM with a WM2k3 kernel core...
Well, one thing that i would suggest that you could start doing, would be a new bluetooth stack based on the WM 2k5/2k6 one (widcomm, i think)...
Anyway, idk russian and has so, i don't understand much of what is said on that link, but what i did understand is that taxist found a way of modifying the programs in a way that he could insert them has XIP (eXecution In Place), without breaking the expected original execution addresses...the thing is: he never revealed how he has done it...
There's a few guys in there that are trying to do what he has done by using the three tools that i've posted previously, but idk if they did acomplished the "XIP chain ROM address redirectioning"...
Regards,
Keeper

kingt0t said:
ok guys hold on you are not making it easy i think it is mush simpler then you think
we need wm6 for jam
we dont have to edit wm6 to make it work on jam
we can upgrade the wm2003se to be wm6\5
Click to expand...
Click to collapse
First prioduce a WM5.0 ROM instead of talking!

Yés kingtot wm6 4 Magician it is not a dream,it is a mirage...

kingt0t said:
we can find upgrads and some great programs to creat a wm2003se rom "main platform" looks like the wm6 and include some services in it like the voice command and renew the dailer and add some upgrades i think this is mush better coz we will not play with fire we can just try to make the perfect choise in 2003 rom with some upgrades and patches right
Click to expand...
Click to collapse
I'm not sure I understand. You want a WM2003SE that only looks like WM5/WM6? But then it can't run WM5/WM6-specific apps... what purpose is that? I hardly see the point. If that's what you want, it already exists and besides, you can just use Wisbar or something similar and make a theme.

WM2003SuperSe must run wm5 apps. it's main task !!!!

still dream or stop
what's going on?

wm6 again became dream

[04/06/09]Modified Phoenix II WM6.1 Rom

Hi there,
My first ROM release.
I hope some of you like it.
As it is my first release I'd like to have feedback on it.
The ROM is cooked with the Phoenix Kitchen from this thread:
http://forum.xda-developers.com/showthread.php?t=476015
Wm6.1 21109 rom.
I wanted to make a fast and stable rom without things I didn't need like MS voice command. I also took out manilla2d and chose to use HTC home instead.
the rom had a 3g Dialer with full video calling support.
Included Programs are:
HTC audio manager, iContact, G-Alarm, Pocket Notepad, NoData, Opera, ms voip plugin, Pocket RAR, S2U2 1.62, MS office, Camera 5.xx, Quick Position,
Total Commander, Advanced Config, Connection Setup, 9 button action screen on long press send button, 8 button comm manager (same skin as Dialer), Hardware keyboard speed increase tweak.
I also included a few freeware games, Rhodium Ringtone package ( and took out most standard windows mobile ringtones). and I took some drivers/packages out for things I never used or thought not necessary, packages are (from SYS folder): IPSECVPN packages, IRDA, Onenote, Remote Desktop, Transcriber and MS voicecommand. (These should be installable with standard cab files.)
I get 82.68 MB total Program Memory after hard reset, and 47,82 free after installing everything I use (like Igo8) and softreset.
Pagepool is set to Dynamic (if anyone has any suggestions about pagepool I'd like to hear it.)
Some Registry tweaks from the standard Phoenix rom are also still included, like setting camera shutter delay and end call delay to 0 ms, glyphcache, powermanagement tweaks, added Igo8.exe to S2U2 exception list, Disabling sliding sound.
Credits go to the Phoenix Development team of course for releasing their rom and their kitchen and for answering my cooking questions!
To Anryl for the Original Port used by the phoenix Development team and to Bepe for releasing the great kitchen tools I used!
I also have to thank A_C for his work on making S2U2 even better with his new password protection and Notification add-on.
and of course everyone who released freeware programs/packages/cabs/anything else I didn't make myself...
Download link:
http://www.megaupload.com/?d=C4XLF5Z1
Mirror:
http://rapidshare.com/files/218166076/Kaiser.rar (thanks to YouBou1992)

is it allowed guyz!! I would like dave & josh to confirm this. good work..

I'm sorry if it s not allowed...
Hope to get a confirmation!

Congrats on your first release sir, Put up that download link for us addict flashers

I guess that means It's allowed
Anyone know some better places to upload?
I could make a torrent, I can share up to 80kb/s upload, but don't know if torrents are allowed here?

Wonderful Mr.Josh, You are really a darling for novice like us. I was scared coz someone told me that modifying an already released ROM is not allowed. Thanks & Kudos to poster again.

Bonusbartus said:
I guess that means It's allowed
Anyone know some better places to upload?
I could make a torrent, I can share up to 80kb/s upload, but don't know if torrents are allowed here?
Click to expand...
Click to collapse
I would stick with what you got man. good job..
sakshamkatyal said:
Wonderful Mr.Josh, You are really a darling for novice like us. I was scared coz someone told me that modifying an already released ROM is not allowed. Thanks & Kudos to poster again.
Click to expand...
Click to collapse
if it's cool with the original chef then go for it

joshkoss said:
if it's cool with the original chef then go for it
Click to expand...
Click to collapse
I hope it's alright with them, as they released a kitchen with their rom as a basis....

Bonusbartus said:
I hope it's alright with them, as they released a kitchen with their rom as a basis....
Click to expand...
Click to collapse
should be fine then since they release a kitchen for everyone to use

what about the name?
congrats man...ill try it..sounds tight..
although i cant speak for parley p (the phoenix chef) that he will be alright with it or not...he is one hell of a nice guy, not just an amazing chef...and i dont think that he would mind this being a modification of the kitchen he released to everyone...but....i think maybe u could change the name?
u see calling it a "modified phoenix" is kinda confusing as ppl might think it has something to do with the original PHOENIX rom series...sorta like copyright infringement lol...
so i think maybe changing the name of ur rom....and then keep the explanation that it is based on the PHOENIX rom kitchen..
just my humble 2 cents
congratz again

haha, I don't think Parley would care, might want to give it your own name, so people don't get confused. Parley wouldn't have released a kitchen if he didn't want people to modify the ROM, if you make something good, release it. You credited us for the kitchen, which is credited to bepe and Anryl as well, so it's all good unless parley thinks otherwise.

i already flash this... but somehow my ActiveSync won't connect... already hard reset twice... now i'm try to download another rom and try to flash... but i doubt i can because i didn't connected through activesync.

tugas2khas said:
i already flash this... but somehow my ActiveSync won't connect... already hard reset twice... now i'm try to download another rom and try to flash... but i doubt i can because i didn't connected through activesync.
Click to expand...
Click to collapse
I flashed this rom 4 times (each time with a lil change) and active sync works normally here,
I did have some problems with it a few days ago, but after going into task manager and shutting down "wcescomm.exe" "rapimagr.exe", shutting down active sync on my kaiser and then reconnecting problem was gone!
If problem stays, you can always flash from sdcard, just copy a rom to it,
rename it to KAISIMG.nbh and restart your kaiser
About a name... well if anyone has an idea, I didn't have much time to think of one cause I should be learning for a test tomorrow

Bonusbartus said:
About a name... well if anyone has an idea, I didn't have much time to think of one cause I should be learning for a test tomorrow
Click to expand...
Click to collapse
how about "the bonus rom" little word play from ur username plus it came from the phoenix kitchen so its a bonus for us

tugas2khas said:
i already flash this... but somehow my ActiveSync won't connect... already hard reset twice... now i'm try to download another rom and try to flash... but i doubt i can because i didn't connected through activesync.
Click to expand...
Click to collapse
sure u can
put ur phone in boot loader mode and flash normally

mazin13 said:
how about "the bonus rom" little word play from ur username
Click to expand...
Click to collapse
My username is already a wordplay, from my name Bart and the latin word bonus (which means good ) So that would be uhm the good Rom?

Bonusbartus said:
My username is already a wordplay, from my name Bart and the latin word bonus (which means good ) So that would be uhm the good Rom?
Click to expand...
Click to collapse
well if u call it the good rom it wont sound so cool...where as bonus...meaning "an extra thing or unexpected addition or gain or prize"...that sounds nice...and people would say: oh i get it!..."bonus coz his name is bonusbart"

I ran the rom just a few minutes ago. Quite nice, good job on your first rom.

Mirror
I just uploaded it on RapidShare
http://rapidshare.com/files/218166076/Kaiser.rar
Enjoy !
btw.. Nice ROM ! Thanks !

YouBou1992 said:
I just uploaded it on RapidShare
http://rapidshare.com/files/218166076/Kaiser.rar
Enjoy !
btw.. Nice ROM ! Thanks !
Click to expand...
Click to collapse
Thanks for the mirror,
I'll paste it in first post
Glad you like it!