i'm using blackD2 version on my wizard.
everytime i open my keyboard all the screen become white , and i can't see anything , plus it's has noise like when i'm near radio or something ( just that there is no radio near my device - i forget to mention the noise is on regular no landscape ) ....
i didn't try hard reset yet , any suggestions ?
at 1st i thought it's because i overclock my wizard to 260 Mhz , but when i cancel the overclock it's still doing problems .
any suggestions before hard reset ?
mohen said:
i'm using blackD2 version on my wizard.
everytime i open my keyboard all the screen become white , and i can't see anything , plus it's has noise like when i'm near radio or something ( just that there is no radio near my device - i forget to mention the noise is on regular no landscape ) ....
i didn't try hard reset yet , any suggestions ?
at 1st i thought it's because i overclock my wizard to 260 Mhz , but when i cancel the overclock it's still doing problems .
any suggestions before hard reset ?
Click to expand...
Click to collapse
Well my first suggestion is to hard reset the device.
What is your IPL/SPL? Are you usng shelltools or using the RUU method to flash this rom?
i did hard reset , and it's didn't solve the problem .
i used the shelltool , but yesterday i upgrade to TNT 5.0 with SSPL .
i think my device is getting broken ... but i have warrenty which means i need to reflash it to original rom ..
i have a similar problem but instead of going white in landscape the touchscreen stops working
that's what happen when wizard meet the floor to many times
Related
So after updating to a couple WM6 ROMS and being happy, my phone starts to act weird, my screen starts to turn white at random times and i have to keep the keyboard slid out slightly to keep the screen from going white. Then after a while it changes again, and now my screen always goes white until i slide the keyboard in and out a couple of times and then slide it back in, but it will only stay normal for a little and my screen will go white again. In hopes to fix this i switched back to my official T-Mobile 2.26 ROM but i am still having the same problem. Can someone please help me fix this, my phone is almost at the brink of not working and i would have to wait about half a year before i can get a new one. Any help will be appreciated.
are you overclocking at all when you are experiencing the problem???
I have heard that overclocking to too high of a speed will cause the phone to go to a white screen..
just a thought
also, if you could, please list all third party apps and the current ROM you are running
.:Nstefanelli:.
Well i was overclocking to 260 using battery status, but i dont do that anymore,i am currently running the T-Mobile 2.26 official ROM, and i have these programs installed:
Wm5torage
Fizz Weather 2
TCPMP 0.81
Pocketdict
If you need some more info you can look at my signature too.
upgrade your IPL/SPL to 3.08..
double_ofour said:
upgrade your IPL/SPL to 3.08..
Click to expand...
Click to collapse
how do u do that ?
killerkhatiby009, you can check if it is a hardware problem by performing a remote control (PC controlling PPC, google for it) and start messing with your phone, see if the PC gives you the same problem.
IF the PC gives a good reading (e.g. no white screen) while the PPC gives you a white face, then it is probably the screen problem (not sure what).
IF both the PC and PPC gives you the white face, it is then either software error (hopefully so), OR internal harware error (e.g you've burned your microprocessor?).
Ok thanks for the help, ill go and try that ppc remote controll thing and report back.
Ok after testing it the PC comes up fine while the Pocket PC comes up white.
double_ofour said:
upgrade your IPL/SPL to 3.08..
Click to expand...
Click to collapse
will this be able to fix it?
can anyone help me?
hanmin said:
IF the PC gives a good reading (e.g. no white screen) while the PPC gives you a white face, then it is probably the screen problem (not sure what).
Click to expand...
Click to collapse
Ok after testing it the PC comes up fine while the Pocket PC comes up white.
Click to expand...
Click to collapse
Sounds like a hardware problem to me, which may be a result of your constant overclocking. It may also be due to a bad switch in the keyboard slider.
You might want to contact your provider and see if the phone is still under warranty and/or if you can get a replacement.
Well my phone is no longer under warrenty, does anyone know of a way to fix my phone or get a replacement?
Hi,
Can someone tell me how to upgrade my IPL please ?
found my answer. Thanks anyway
I have the EXACT same problem
Ignore my signature - I downgraded back to the latest stock T-Mobile ROM. I see the same problem no matter what ROM I am running.
It is EXACTLY the same as you describe here. I can usually make it stop by pressing the sides together (holding the screen and keyboard slider tighly closed). Once it stops if I set it down and don't touch it it will work fine.
Also when I reboot the splash screen never has the problem - the problem starts as soon as WM boots.
So what did you have to do? Buy a new one? Or were you able to get service or an exchange?
It seems to be the mechanics of the display connector that are causing this. I looked in the service manual and it shows a stiff flat flex-cable connecting the keyboard to the screen, and it seems to me that this cable is the problem - either it is damaged or it is not fully seated on one end or the other.
I considered trying to dissassemble it and clean/reset connecters - for about a nanosecond. But it looks way too fragile and full of hidden little plastic hooks that will break off if you don't release each one in exactly the right way and then it will never go back together again.
Hi,
I have a very strange problem... I have a german MDA Vario IV (Raphael) and I recently flashed ROMEOS 1.12, then HTC StockROM and after a couple of days it first happened, that my camera viewfinder is completely black. The camera, however, works, i.e. it takes pictures which I can view in the album.
When I tap the screen in camera mode, I see the 3 symbols, but when I tap the preferences-wheel, nothing happens.
When Romeos 1.40 (German) came out, I flashed it - and I still have the problem. I don't quite understand it, as it worked first with the HTC Rom and after about 14days it stopped working.
Do you have any help?
I just had the same problem. Fixed by doing a hard reset...
did you flash a new radio?
I just registered to report this same issue.
I just picked up my fuze today, and was going through the steps in the noob guide before I decided to stop and just let the phone install the regular software so I could at least activate it before a new bill kicked in before the account got cancelled.
Right before I stopped going through the noob guide, I got as far as doing a soft reset right before the installing ATT bloatware and was removing some options in the guide and restarting. Then, since I just wanted to activate the phone (I had no SD card to safely try out all the steps in the noob guide, and wanted to wait for it), I did a hard reset.
After I activated my phone, I've been trying out my camera and it just shows a black screen. If I touch the screen the three buttons show up and clicking on the buttons don't do anything. Though, if I hold the enter key it clicks and takes a picture which shows up in my album.
I'm going to wait till my SD card comes in before I do another hard reset to do the install again. Hopefully the hard reset fixes the issue.
Still no one else with this issue? I have flashed NATF 4.5 as well as energy 2.0 . I have changed to two different radios and this problem has persisted. Everything works fine at first, but then within a couple of days it goes black. Everything is exactly as others have reported. Pictures take, the touch screen menus work ( selecting any setting ).... its just the viewfinder that is acting goofy. Soft resetting it will occasionally make it work again. It makes me feel as though some of us have some software somewhere that isnt acting as it should. I googled the issue to no avail.
Any gurus able to shed some light on this matter?
Currently running:
HardSpl 1.9
EnergyRom 2.0
Radio 1.02.25.32
I am running Shep's 3.0 rom with the new 1.12.25.19 radio and I have just recently had this viewfinder problem arise as well. I am about to flash Shep's new 3F and will check the camera after hard reset.
Is anyone running additional programs when this arises? I had thought there was a conflict with freecaddie as I was on the golf course when I noticed the problem but maybe this is more widespread?
KSS said:
I am running Shep's 3.0 rom with the new 1.12.25.19 radio and I have just recently had this viewfinder problem arise as well. I am about to flash Shep's new 3F and will check the camera after hard reset.
Is anyone running additional programs when this arises? I had thought there was a conflict with freecaddie as I was on the golf course when I noticed the problem but maybe this is more widespread?
Click to expand...
Click to collapse
It must be as I dont play freecaddy. I can post all of the addons I have used...maybe theres something in common?
Ok heres the list
Ageye G-Alarm ( Which isnt working correctly anyway as it plays the WM alarm and not my MP3 )
Coreplayer
WMWifiRouter
MS Livesearch ( Preinstalled )
ShapeServices IM +
Skyfire
Skype
TomTom7
Any of these similar ?
pyraxiate said:
It must be as I dont play freecaddy. I can post all of the addons I have used...maybe theres something in common?
Ok heres the list
Ageye G-Alarm ( Which isnt working correctly anyway as it plays the WM alarm and not my MP3 )
Coreplayer
WMWifiRouter
MS Livesearch ( Preinstalled )
ShapeServices IM +
Skyfire
Skype
TomTom7
Any of these similar ?
Click to expand...
Click to collapse
Of the programs you listed, Skyfire is the only one I am also running. I just completed my flash and turned the camera on prior to installing any apps, cabs, etc... and the viewfinder worked fine.
I am in the process of adding my customizations back on, doing a PIM restore, and installing cabs and will edit my post later to report whether it continues to function correctly.
After setting things up the way I like them and a full day of use, the viewfinder still works fine. I am baffled as to the cause but as long as its works I won't complain.
To those still having the problem, I would recommend a hard reset at a minimum or perhaps try a new rom.
KSS said:
After setting things up the way I like them and a full day of use, the viewfinder still works fine. I am baffled as to the cause but as long as its works I won't complain.
To those still having the problem, I would recommend a hard reset at a minimum or perhaps try a new rom.
Click to expand...
Click to collapse
This was an issue with RRE's roms a while back. Not sure what he did to fix it but I know he tweaked a flashed new versions about 100 times in one day! I would post the question in your respective rom's threads and see if the cooks have a better idea. I would bet that there is a file or setting common to all of the roms listed here that is causing the problem.
Im running the stock rom in a 1 1/2 month old Fuze
The Black screen happens to me, if too much sunlight gets thru on superfine settings. (i hold it facing directly into the sun) It seems to blow out the picture (goes all white) -then theres no display at all (black) unless i exit camera and restart.
Camera viewfinder is black
Hi,
there is a fix for this on the htc asia site, if you go to the support tab and look at the downloads for touchpro, I am not sure its for all phone as it asked for my serial number and told me it was not for my phone, on this site at least it seemed to be for hong kong, singapore & china, Perhaps check the htc site for your location.
Good Luck
A|C
I m getting blank screen without any display. Just white screen with full brightness. Wat to do? Solutions please. Thank You Is cotulla hearing
Do a hard reset.
if that does not work then install new ROM.
Flash original rom at first (1.12 for example) and check there.
Tried Hard Reset. No Changes in display
Let me explain , I had installed cotulla's HTCMAG_ROM_WWE_O4. It was working flawless for about 1 month, till one day, when I was downloading a song, and my device hung up because of insufficient memory. I did a soft reset, and after restarting , I was surprised to see the screen with only brightness and nothing else. I reinstalled the same ROM again, while installing I could not see the progress of ROM upgrading on device screen. I finished it from PC.
Yet the problem is same. I think I have damaged my display and need to replace.
If anyone has solution Plz. Let me know.
Thank You so much
I've a problem, during the call the proximity sensor don't work... How to fix it?
i have somthing similar... the sensor works most of the time... but too many times it doesn't work correctly... like in this...
i dial a number and press talk... sensor covered... the screen goes off.... when it actualy starts to ring in the earpiece the screen goes on.... i take it off my ear and put it back and the screen turns off again.... when the call is answered on the other side the screen goes on again...
is there a fix to this?.... it happend on different roms and it doesn't happens all the time... and usually i have at least one number that always has this behaviour and at least one that works correct all the time....
Happens to me too. By far the most important problem of the HD2.
no issue ?
G-ThGraf said:
no issue ?
Click to expand...
Click to collapse
What ROM are u running? It may have something to do with it.
I use Clean EX UDT (2.16 version) i will try to upgrade it after download is finishing!
But this problem comes last month on Official ROM 1.66
i've had it on several roms...
****, i will try to send a message to exidler this night! May be he can help us!
I also have this problem since I've made an update to O2 ROM 1.72.207.0 (o2 Germany branded ROM).
With the previous 1.48 ROM (also o2 branded), I've had no problems with the proximity sensor.
Is there any fix for it, or has HTC built a new bug into the new firmware?
No beacause i actualy use a 1.72 ROM (lastest from HTC .:.) and i've this bug
The ROM work 2 weeks and now this ****ing bug comes back !
is there e rom that dowsn't have this bug...?
I think the answer is : No because it's maybe Phone.exe who have this bug!
Do you have installed the lastest camera app? This is the problem, when I install, the sensor in call don´t work.
Cheers!
No any news instal juste Iris and Shamzam
I haven't install the camera update too and have this problem.
I have installed the same apps than before the update from 1.48 to 1.72, so apps shouldn't be the issue.
I have realized that the call menu goes to landscape mode, when this problem occurs.
i too encounter this problem. im using the stock rom 1.66. hmmmm...
Do any of you lot use BsB tweaks? Im asking because i realised that when i use BsB tweaks, i get the bug and also sometimes advanced config aswell.
Try it without BsB but the only thing is you may need hard reset first to ensure all BsB tweaks are gone.
May not be the solution,just a suggestion.
Also, you should try Dutty's Roms as i have never had any problems with his roms.....but mind u, i havn't installed BsB in his rom yet to see if i get the bug as most of the tweaks can be done individually.
Yes may be but i need BsB to disable lock screen and others things...
no BsB... just cleanEX hyperrom 6.5.x... when i'll flash next i'll try to keep for at least a day only the rom and no program installed... i don't know if i'll can....
Yes, I have also installed BsB Tweaks. Will try to uninstall it and that look if the problem is still there. I don't want to make a hardreset, because my phone is finally configured after 3 days after firmware update.
In ROM 1.48 I also had installed BsB Tweaks, so it's very strange.
Hi,
the touch screen sensivity on my LG GM750 really sucks..
i can only use the screen with my nail, or the stylus..
if i use a finger i have to apply a lot of pressure for it to react..
i already tried different things:
-calibrating with very few pressure applied to the screen
-changing HKLM/Drivers/TouchPanel/PressureThreshold - touchpanel folder does not even exist..
-changing:
# HKEY_LOCAL_MACHINE\Hardware\Devicemap\Touch\Click
# HKEY_LOCAL_MACHINE\Hardware\Devicemap\Touch\DownUp
these values didn't even exist.. making them myself did not change anything (and yes i did a soft reset)
I searched about everywhere.. can anyone help me?
What firmware dou you have¿? Because the v10f helps (not much) with sensivity.
hmm i have the v10d
i'll check the v10f tomorrow thanks..
i hope i can update already..
ok, that didn't really help..
i used lg's update tool to update to the newest version.. it said a new version was available..
after updating nothing has changed.. i check the phone and what does it say.. -_- v10d
so basicly i've just did a hard reset.. with the only result that i lost all my apps and settings and stuff -_-" .. great
I know it's an old thread, but got to wonder about users with resistive screens complaining they don't behave as capacitive. You ARE supposed to use your stylus, NOT your finger with a lot of pressure.