death of graphite - Non-Touchscreen Windows Mobile Other

i was installing wm6 rom upgrade on my uk graphite and then tried to install it on asian graphite version, wen it finished installing, it says follow instructions on phone screen, but there was nothing, my asian graphite has died, when i go on bootloader mode, and click Yes to reset, it just goes black/off.
anyone know now to solve this problem?
cheers

Related

Another Paperweight, the story goes..

First it was spl 3.8. Was having trouble but could still work with the phone. Suddenly I became flashoholic. Just the same way as I flashed 50 times before, I was flashing. It all went ok. After that I'm stuck at the splash screen. Says, Format Failed. But can get into bootloader and flash roms. But that's all. No booting business.
Guess this is the end of the road, unless there is any solutiion. Any one out there?
IPL 2.20.001
SPL 3.08.001
Radio 2.47.21
OS 4.0.0.0.6 (was)
Now the mobiz step 1
i think i'm having a similiar problem with u..
flashed to SPL2.20. Everything ok..
after a few flashes, only thing i get now is the bootloader screen..
i can flash ROMs, RUU tells me its successful, but PDA just restarts and goes back to bootloader
Waaah :'( I have a most similar problem I was running pdaviet 4.0.0.6 Touch for almost 2 weeks now without a single glitch.. the phone fell on my carpet and went to bootloader screen and eversince then it has never recovered I tried a hard reset it didn't work when I was pressing the send button it did nothing I did some forum searches and tried putting back the nvid RUU and it said that the update was succesfull and the progress bar on the phone moved accordingly but it went back to the bootloader screen ... then I tried pdaviet temp rom that was in the package still no go I can tell it works somehow because the USB lights up in the bottom left when I plug the usb cable and the progress bar that moves, but I'm getting desperate IPL and SPL info is in my sig...
I can go into bootloader, flash any wm5 roms without IPL SPL. But that is all. Unless we can find a way to unlock the cid and flashback the original dopod rom, we are stuck.
anyone??? I cant use my phone at all now :'( and I didn't even re-flash it... all was working fine I just DROPPED it on a CARPET no real shock and since then it's on the bootloader screen
In my oppinion you have to send it for repair... I think it's really a phisical damage...
really no progress..
i opened a thread in the WM6 area also...
seems to be stucked at bootloader no matter what i do..
tried every single ROM, tried reflashing radio rom, tried reflashing ipl/spl, tried every RUU available..
when u guys hard reset, does it say Format is Failed ?
ice_mouton, i'm something like you.. dropped it few weeks ago.. but it still ran fine.. upgraded to PDAVIET's 4.0.0.0.6 Touch.. had no problems for the first few days of use... suddenly it refused to reset and was stuck at vendor boot screen...

Can't Flash! Stuck on the three color bars screen

Hello again,
I been flashing ROMS for a while now but now I having some problems that I can't solve.
Since I installed the Laurentius26_KaiserDiamond_V10 I can't update the rom anymore. The Kaiser connects to the update, the update program confirms the connection (it checks if the battery is above 50%, confirm the previous fiirmware, etc.)
When the program shows the progress bar (On the PC) the kaiser screen blimp one time to the grey screen (the one with the progression bar) and turn back to three collors screen (in less than a second). After one or two minutes the program (on the PC) gives a erro message.
I have to reset the Kaiser but no ROM was installed
Does anyone know how to solve this problem? I'm using SPL 3.29 but I have already tried Hard SPL 3.28 and back to the 3.29 again.
Thanks
Hi there,
That happened to me too. What I had to do was to download the original rom from HTC and flash that. After, i did the usual: hard reset, remove batter, restart computer. Then I could flash
Michael
Diamond: dutty 1.8 full
Kaiser: Romeos 4.3
Check the link in My Sig.
Ta
Dave
I tried your sugestions. Tried to flash the original Orange ROM but had the same problem as the cooked ROMs. It stopped at the three colors screen.
I think myh problem is a little different from other cases here. My phone is working with the Rom it have right now. It only got stuck on the three color screen when trying to flash a new Rom. To remove the screen is just reset it (normal reset, no hard reset) and it goes back to 'normal' but with the old rom. Can't flash a new one
Also tried the mtty.exe method, but when I open the mtty it shows "CLIENT". If I push any key it shows one more "CLIENTE". after 34 "CLIENT" Messages (it shows "CLIENTCLIENTCLIENTCLIENT" it freezes...
Can someone help me please?
Thanks
Try flashing the new Hard SPL be cmonex.
http://forum.xda-developers.com/showthread.php?t=420683
Thanks
Dave

After flashing magldr 1.12 phone stuck on white screen with green logo

Hello
after installing magldr 1.12 (wanted to try win7) my htc hd2 is stuck on white screen with htc logo. I saw simmilar posts how to solve this problem but holding down volume key and pressing turn on button doesnt boot into four colour screen it is still white screen with green logo
1.66 rom eastern europe was installed and 2.08hspl, however I didnt install any radio How to get back to rom
Thank you in advance
any solution to this problem?? i am having same issue. thnx
Can you post step-by-step what you did?
Did You make task29 before magldr?
White screen after magldr 112 - help !
titjukaz said:
hello
after installing magldr 1.12 (wanted to try win7) my htc hd2 is stuck on white screen with htc logo. I saw simmilar posts how to solve this problem but holding down volume key and pressing turn on button doesnt boot into four colour screen it is still white screen with green logo
1.66 rom eastern europe was installed and 2.08hspl, however i didnt install any radio how to get back to rom
thank you in advance
Click to expand...
Click to collapse
hello
i have the same problem !
have you found the solution ?
Please , answer me ....
Thanks
alessanro - venice - italy
same problem here please help
After flashing Magldr the Phone Reboots but gets stuck at the Splash Screen
You most probably have an older incompatable Radio on your phone. The Radio needs to be at LEAST 2.08.50 and the .50 is very important as it means the Radio is 576 RAM compatable (as stated in post1). The Radio I recommend is 2.15.50.14 and you can download it *HERE*. Boot your phone into the Bootloader Screen and flash a newer Radio and everything should be fine
White screen of death
I have the same problem.
Installed:
* HardSPL 3.00
* Radio 2.15.50.14
* MAGLDR 1.13 - here I got the same problem as all in this thread: white screen with HTC logo after reboot hanging forever. MAGLDR doesn't load by switching off, pressing and holding volume down and power buttons.
Any solution to this?
Wow! Got MAGLDR installed finally… after several cycles of different installations.
Here is what I found:
My original SPL was 3.00-0000, so previously I tried installing 3.00-HSPL. That didn’t work.
Now I installed exactly 2.08-HSPL version and here we go – I see MAGLDR menu now!
Good luck everyone! I hope this will help others with the same problem. I think we all need to read carefully (about 2.08) )))

TP2 not booting

My TP2 (Sprint) battery went too low and turned off. After charging the battery, the phone just comes up to the Sprint splash screen (Yellow Sprint Symbol) and gives a little vibrate and reboots again. This goes on continuously till I pull the battery . I on am Stock Sprint WM6.1
I can enter into the bootloader screen. I have tried
1. Task 29s
2. Flashed a different radio.
3. Reflashed Stock 6.1 ROM again.
4. Hard Reset it a couple of times
My phone is HSPL unlocked in that I see *olinex 1.0 when I go into the bootloader.
I have tried flasing ROMS from both the SD card as well as from the PC. I cannot go past the green Win 6.1 screen .
I am out of ideas and would really appreciate it if anyone saw this signature previously or has any ideas as to how to solve this.
TIA
baikal2 said:
My TP2 (Sprint) battery went too low and turned off. After charging the battery, the phone just comes up to the Sprint splash screen (Yellow Sprint Symbol) and gives a little vibrate and reboots again. This goes on continuously till I pull the battery . I on am Stock Sprint WM6.1
I can enter into the bootloader screen. I have tried
1. Task 29s
2. Flashed a different radio.
3. Reflashed Stock 6.1 ROM again.
4. Hard Reset it a couple of times
My phone is HSPL unlocked in that I see *olinex 1.0 when I go into the bootloader.
I have tried flasing ROMS from both the SD card as well as from the PC. I cannot go past the green Win 6.1 screen .
I am out of ideas and would really appreciate it if anyone saw this signature previously or has any ideas as to how to solve this.
TIA
Click to expand...
Click to collapse
You could try re-locking the phone, installing the stock 6.5 rom, and then unlocking the phone again.
Also be sure to give it lots of time during the first boot (like do the install, and then leave to make dinner or something). There have been days where I though the phone had locked up, only to have it finish booting when I was about to pull the battery.
wizardknight said:
You could try re-locking the phone, installing the stock 6.5 rom, and then unlocking the phone again.
Also be sure to give it lots of time during the first boot (like do the install, and then leave to make dinner or something). There have been days where I though the phone had locked up, only to have it finish booting when I was about to pull the battery.
Click to expand...
Click to collapse
Wizard,
I ma noob and was wondering the need for relocking. Does it have any benefits as opposed to simply flashing WM 6.5 on to the phone. I have flashed WM 6.5 onto the phone and it goes all the way to the Orange screen(Preparing for activation or something like that with the progress bar) and then reboots again endlessly.
My hesitancy with re-locking comes from the fact that to unlock you need to be in a position to active sync and if the flash fails after the relock ,I might not be in a position to unlock again.
baikal2 said:
Wizard,
I ma noob and was wondering the need for relocking. Does it have any benefits as opposed to simply flashing WM 6.5 on to the phone. I have flashed WM 6.5 onto the phone and it goes all the way to the Orange screen(Preparing for activation or something like that with the progress bar) and then reboots again endlessly.
Click to expand...
Click to collapse
In rare cases re-locking and then re-unlocking resolves rom loading issues.
baikal2 said:
My hesitancy with re-locking comes from the fact that to unlock you need to be in a position to active sync and if the flash fails after the relock ,I might not be in a position to unlock again.
Click to expand...
Click to collapse
As your phone does not boot, I don't see why you are worried about it. You have nothing to lose. Your phone does not work now at all.
You can always flash a stock rom to a locked phone anyway. The only tool that would rule out is the task 29, and you already said that didn't work.
Either way I would try to load the stock wm 6.5 rom, and give it a very long time to finish loading before doing anything else first.
I have to echo WizardKnight's advice here... It seems crazy, but it fixed one of my dead TP2's. It wouldn't boot past the first white HTC screen, I never even got the OS screens to load...
I tried literally everything I could think of... for some reason relocking it revived it...

HTC sensation xe stuck in RUU screen

Hello everyone,
when I tried to factory reset this phone, I noticed that there was a lot of stuff on my sd-card which I dont need enymore. So I formatted the card, put back the latest cm11 build, flashed it after wiping everything and it gave my an error. After a bootloop that followed, I decided that I should do a RUU. But the RUU.exe got stuck at about 43%. I also tried the commandscreen RUU, which got stuck at
"(bootloader) [RUU]WP,dzdata,0"
I tried many different RUU and all of them got stuck.
Now my phone is stuck at the RUU screen with the gray HTC logo and the black background.
Does anybody know what I should do now? I really need the phone so please help.
danilandroid
danilandroid said:
Hello everyone,
when I tried to factory reset this phone, I noticed that there was a lot of stuff on my sd-card which I dont need enymore. So I formatted the card, put back the latest cm11 build, flashed it after wiping everything and it gave my an error. After a bootloop that followed, I decided that I should do a RUU. But the RUU.exe got stuck at about 43%. I also tried the commandscreen RUU, which got stuck at
"(bootloader) [RUU]WP,dzdata,0"
I tried many different RUU and all of them got stuck.
Now my phone is stuck at the RUU screen with the gray HTC logo and the black background.
Does anybody know what I should do now? I really need the phone so please help.
danilandroid
Click to expand...
Click to collapse
I still have similar problem, need Help!
http://forum.xda-developers.com/showthread.php?p=57403223#post57403223
Me have been told I could only run an RUU and nothing else , cause I am stuck in RUU-Mode

Categories

Resources